summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2014-09-06Merge tag 'for-linus-20140905' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd fixes from Brian Norris: "Two trivial MTD updates for 3.17-rc4: - a tiny comment tweak, to kill a bunch of DocBook warnings added during the merge window - a small fixup to the OTP routines' error handling" * tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd: mtd: nand: fix DocBook warnings on nand_sdr_timings doc mtd: cfi_cmdset_0002: check return code for get_chip()
2014-08-25mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()Roger Quadros
commit 65b97cf6b8de introduced in v3.7 caused a regression by using a reversed CS_MASK thus causing omap_calculate_ecc to always fail. As the NAND base driver never checks for .calculate()'s return value, the zeroed ECC values are used as is without showing any error to the user. However, this won't work and the NAND device won't be guarded by any error code. Fix the issue by using the correct mask. Code was tested on omap3beagle using the following procedure - flash the primary bootloader (MLO) from the kernel to the first NAND partition using nandwrite. - boot the board from NAND. This utilizes OMAP ROM loader that relies on 1-bit Hamming code ECC. Fixes: 65b97cf6b8de (mtd: nand: omap2: handle nand on gpmc) Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-25mtd: nand: omap: Revert to using software ECC by defaultRoger Quadros
For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-08-19Merge l2-mtd/next into l2-mtd/masterBrian Norris
2014-08-19mtd: spi-nor: drop jedec_probe /helper/ functionRafał Miłecki
It's a one-liner doing no magic and its name may be confusing because it does not have to use JEDEC (e.g. when using alternative read_id). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: spi-nor: remove duplicated w25q128 entryRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: gpio_flash: handle case where offset + len exceeds the window sizeAaron Wu
Fix the bug in handling gpio flash read/write when offset + len from MTD exceeds the window size Signed-off-by: Aaron Wu <Aaron.wu@analog.com> [Brian: made some commentary edits. Also note that the BUG_ON() was provably false for all non-negative inputs (since x % y <= x), so we dropped it.] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: Use ULL-suffix for big u64 constantGeert Uytterhoeven
drivers/mtd/nand/nand_timings.c:45: warning: integer constant is too large for ‘long’ type [ Editorial note: This is a false warning. Looking at ISO draft N1124 (this is approximately C11, the first PDF I had lying around), section 6.4.4.1 (statement 5): "The type of an integer constant is the first of the corresponding list in which its value can be represented." So this should not be an overflow, and any toolchain that says so (e.g., GCC 4.4) is buggy. -Brian ] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: NFC: fix mtd_nandbiterrs.ko test fail when using sram writeWu, Josh
When enable NFC sram write, it will failed the mtd_nandbiterrs.ko test. As in driver's nfc_sram_write_page(), if ops->mode equal to MTD_OSP_RAW, driver assumes the data buffer contains one page data and one oob data followed. And driver will write the page data and oob data to nand. But this is wrong implementation. Since the data buffer don't contains the oob data to write. We should write the chip->oob_poi to nand's oob. So this patch fix it by writing the oob data from chip->oob_poi. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: terminate user-provided stringBrian Norris
Noticed by Coverity as a potential security issue. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: fix integer widening problemsBrian Norris
chip->pagebuf is a 32-bit type (int), so the shift will only be applied as 32-bit. Fix this for 64-bit safety. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: maps: solutionengine: drop excess dependencyBrian Norris
Already depends on SOLUTION_ENGINE, so we don't need the SUPERH dependency too. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nandsim: fix integer wideningBrian Norris
This multiplication should be done in 64-bit, not 32-bit. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: denali: set proper error code on timeoutBrian Norris
The condition "if (irq_status == 0)" already ensures that one half of the ternary ?: is dead. I think this should probably actually be a FAIL, not a PASS. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jamie Iles <jamie@jamieiles.com>
2014-08-19mtd: use __packed shorthandBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: tests: fix integer overflow issuesBrian Norris
These multiplications are done with 32-bit arithmetic, then converted to 64-bit. We should widen the integers first to prevent overflow. This could be a problem for large (>4GB) MTD's. Detected by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
2014-08-19mtd: mtdswap: fix integer overflowBrian Norris
Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: remove dead non-char logicBrian Norris
MTD used to allow compiling out character device support. This was dropped in the following commit, but some of the accompanying logic was never dropped: commit 660685d9d1b4730f0b5ca97fa95f272f99c63bce Author: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Date: Thu Mar 14 13:27:40 2013 +0200 mtd: merge mtdchar module with mtdcore The weird logic was flagged by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-08-19mtd: sm_ftl: initialize error codeBrian Norris
There is one theoretical case that could fall through to using an uninitialized value as the return code. Let's give it a value of 0. Untested. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: correct upper bounds check for mtd_*() APIsBrian Norris
When checking the upper boundary (i.e., whether an address is higher than the maximum size of the MTD), we should be doing an inclusive check (greater or equal). For instance, an address of 16MB (0x1000000) on a 16MB device is invalid. The strengthening of this bounds check is redundant for those which already have a address+length check and ensure that the length is non-zero, but let's just fix them all, for completeness. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: cfi_cmdset_0002: allow retry/timeout loop to exitBrian Norris
The variable 'retries' is never modified, so if the reset operation never is going to complete, we'll get stuck in an infinite loop. It looks like the intention was to decrement 'retries' on every loop. Untested. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: nand: fix nand_lock/unlock() functionWhite Ding
Do nand reset before write protect check. If we want to check the WP# low or high through STATUS READ and check bit 7, we must reset the device, other operation (eg.erase/program a locked block) can also clear the bit 7 of status register. As we know the status register can be refreshed, if we do some operation to trigger it, for example if we do erase/program operation to one block that is locked, then READ STATUS, the bit 7 of READ STATUS will be 0 indicate the device in write protect, then if we do erase/program operation to another block that is unlocked, the bit 7 of READ STATUS will be 1 indicate the device is not write protect. Suppose we checked the bit 7 of READ STATUS is 0 then judge the WP# is low (write protect), but in this case the WP# maybe high if we do erase/program operation to a locked block, so we must reset the device if we want to check the WP# low or high through STATUS READ and check bit 7. Signed-off-by: White Ding <bpqw@micron.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: Fixed checkpatch seq_printf warningsSamarth Parikh
Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" This patch is created with reference to the ongoing lkml thread https://lkml.org/lkml/2014/7/15/646 where Andrew Morton wrote: " - puts is presumably faster - puts doesn't go rogue if you accidentally pass it a "%". - this patch would actually make compiled object files few bytes smaller. Perhaps because seq_printf() is a varargs function, forcing the caller to pass args on the stack instead of in registers. " Signed-off-by: Samarth Parikh <samarthp@ymail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: denali: avoid using a magic numberMasahiro Yamada
MAP10 command with '0x2000' data sets up a read-ahead/write access. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: remove redundant dev_err callWei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: spi-nor: add support for Micron M25PX80Thomas Petazzoni
This commit adds the support in the spi-nor driver of the Micron M25PX80 flash, a 8 Mbit SPI flash from Micron. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: add pmecc support for 512, 1k, 4k, 8k page sizeWu, Josh
PMECC can support 512, 1k, 2k, 4k, 8k page size. The driver currently only support 2k page size nand flash. So this patch add support to 512, 1k, 4k and 8k page size nand flash. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: atmel_nand: increase chip_delayRaphaël Poggi
Some nand with 8k page size like Micron MT29F32G08ABAAAWP need more than 20us. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: use NULL instead of 0 for an addressMartin Kepplinger
Use NULL instead of 0 when returning an address. This fixes a sparse warning. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: ndfc: silence an array underflow static checker warningDan Carpenter
We check "cs" for array overflows but we don't check for underflows and it upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-15mtd: cfi_cmdset_0002: check return code for get_chip()Brian Norris
Coverity CID 1230633 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Christian Riesch <christian.riesch@omicron.at>
2014-08-13Merge tag 'upstream-3.17-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS changes from Artem Bityutskiy: "No significant changes, mostly small fixes here and there. The more important fixes are: - UBI deleted list items while iterating the list with 'list_for_each_entry' - The UBI block driver did not work properly with very large UBI volumes" * tag 'upstream-3.17-rc1' of git://git.infradead.org/linux-ubifs: (21 commits) UBIFS: Add log overlap assertions Revert "UBIFS: add a log overlap assertion" UBI: bugfix in ubi_wl_flush() UBI: block: Avoid disk size integer overflow UBI: block: Set disk_capacity out of the mutex UBI: block: Make ubiblock_resize return something UBIFS: add a log overlap assertion UBIFS: remove unnecessary check UBIFS: remove mst_mutex UBIFS: kernel-doc warning fix UBI: init_volumes: Ignore volumes with no LEBs UBIFS: replace seq_printf by seq_puts UBIFS: replace count*size kzalloc by kcalloc UBIFS: kernel-doc warning fix UBIFS: fix error path in create_default_filesystem() UBIFS: fix spelling of "scanned" UBIFS: fix some comments UBIFS: remove useless @ecc in struct ubifs_scan_leb UBIFS: remove useless statements UBIFS: Add missing break statements in dbg_chk_pnode() ...
2014-08-08Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "AMD-compatible CFI driver: - Support OTP programming for Micron M29EW family - Increase buffer write timeout, according to detected flash parameter info NAND - Add helpers for retrieving ONFI timing modes - GPMI: provide option to disable bad block marker swapping (required for Ka-On electronics platforms) SPI NOR - EON EN25QH128 support - Support new Flag Status Register (FSR) on a few Micron flash Common - New sysfs entries for bad block and ECC stats And a few miscellaneous refactorings, cleanups, and driver improvements" * tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits) mtd: gpmi: make blockmark swapping optional mtd: gpmi: remove line breaks from error messages and improve wording mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables mtd: atmel_nand: NFC: support multiple interrupt handling mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit mtd: atmel_nand: add NFC status error check mtd: atmel_nand: make ecc parameters same as definition mtd: nand: add ONFI timing mode to nand_timings converter mtd: nand: define struct nand_timings mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error mtd: denali: use 8 bytes for READID command mtd/ftl: fix the double free of the buffers allocated in build_maps() mtd: phram: Fix whitespace issues mtd: spi-nor: add support for EON EN25QH128 mtd: cfi_cmdset_0002: Add support for locking OTP memory mtd: cfi_cmdset_0002: Add support for writing OTP memory mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory mtd: cfi_cmdset_0002: Add support for reading OTP mtd: spi-nor: add support for flag status register on Micron chips mtd: Account for BBT blocks when a partition is being allocated ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ...
2014-07-30MIPS: Alchemy: remove au_read/write/syncManuel Lauss
replace au_read/write/sync with __raw_read/write and wmb. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Alchemy: add helpers to access static memory ctrl registers.Manuel Lauss
This patch changes the static memory controller registers to offsets from base, prefixes them with AU1000_ to avoid silent failures due to changed addresses and introduces helpers to access them. No functional changes, comparing assembly of a few select functions shows no differences. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7463/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-28UBI: bugfix in ubi_wl_flush()Richard Weinberger
Use the _safe variant because we're iterating over a list where items get deleted and freed. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-28UBI: block: Avoid disk size integer overflowRichard Weinberger
This patch fixes the issue that on very large UBI volumes UBI block does not work correctly. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-28UBI: block: Set disk_capacity out of the mutexEzequiel Garcia
There's no need to set the disk capacity with the mutex held, so this commit takes the variable setting out of the mutex. This simplifies the disk capacity fix for very large volumes in a follow up commit. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-28UBI: block: Make ubiblock_resize return somethingEzequiel Garcia
Currently, ubiblock_resize() can fail if the device is not found in the list. This commit changes the return type, so the function can return something meaningful on error paths. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-07-27mtd: gpmi: make blockmark swapping optionalLothar Waßmann
With a flash-based BBT there is no reason to move the Factory Bad Block Marker from the data area buffer (to where it is mapped by the GPMI NAND controller) to the OOB buffer. Thus, make this feature configurable via DT. This is required for the Ka-Ro electronics platforms. In the original code 'this->swap_block_mark' was synonymous with '!GPMI_IS_MX23()', so use the latter at the relevant places. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-27mtd: gpmi: remove line breaks from error messages and improve wordingLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-27mtd: gpmi: remove useless (void *) type casts and spaces between type casts ↵Lothar Waßmann
and variables Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: atmel_nand: NFC: support multiple interrupt handlingJosh Wu
Fix the following error, which sometimes happens during the NFC data transfer: atmel_nand 80000000.nand: Time out to wait for interrupt: 0x00010000 atmel_nand 80000000.nand: something wrong, No XFR_DONE interrupt comes. The root cause is that in the interrupt handler, we read the ISR but only handle one interrupt. If more than one interrupt arrive at the same time, then the second one will be lost. During the NFC data transfer. Two NFC interrupts (NFC_CMD_DONE and NFC_XFR_DONE) may come at the same time. NFC_CMD_DONE means NFC command is sent, and NFC_XFR_DONE means NFC data is transferred. This patch can handle multiple NFC interrupts at the same time. During the NFC data transfer, we need to wait for two NFC interrupts: NFC_CMD_DONE and NFC_XFR_DONE. Also we separate the completion initialization code to a nfc_prepare_interrupt(), which is paired with nfc_wait_interrupt(). We call nfc_prepare_interrupt() before sending out nfc commands, to make sure no interrupt lost. Reported-by: Matthieu CRAPET <Matthieu.CRAPET@ingenico.com> Tested-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bitWu, Josh
In nfc_device_ready(), it's more reasonable to check R/B bit in NFC_SR than waiting for the R/B interrupt. It cost less time. Signed-off-by: Josh Wu <josh.wu@atmel.com> Tested-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: atmel_nand: add NFC status error checkWu, Josh
Add a new function to read the NFC status. Meantime, this function will check if there is any errors in NFC. Signed-off-by: Josh Wu <josh.wu@atmel.com> Tested-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: atmel_nand: make ecc parameters same as definitionBo Shen
If the ecc parameter is not the same as definition, when the mtd core check these parameters, it will give the error result. Take the following as an example: Calculate how many bits can be corrected in one page. According to the ecc parameters definition, one page correct bits = (mtd->writesize * ecc->strength) / ecc->size take the following use case as an example: mtd->writesize = 2048 bytes ecc->strength = 4 bytes (for 512 bytes) before this patch, the ecc->size = 2048, so the result is 4 bytes. after this patch, the ecc->size = 512, so the result is 16 bytes. So, align the ecc parameters the same as definition to correct this kind of error. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21mtd: nand: add ONFI timing mode to nand_timings converterBoris BREZILLON
Add a converter to retrieve NAND timings from an ONFI NAND timing mode. At the moment, only SDR NAND timings are supported. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-21Merge tag 'v3.16-rc6' into MTD development branchBrian Norris
Linux 3.16-rc6
generated by cgit (git 2.34.1) at 2025-04-25 02:33:29 +0000