summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2019-07-13Merge tag 'mtd/for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-07Merge tag 'spi-nor/for-5.3-v2' of ↵Miquel Raynal
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control
2019-07-07mtd: concat: implement _is_locked mtd operationChris Packham
Add an implementation of the _is_locked operation for concatenated mtd devices. This doesn't handle getting the lock status of a range that spans chips, which is consistent with cfi_ppb_is_locked and cfi_intelext_is_locked which only look at the first block in the range. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-07mtd: concat: refactor concat_lock/concat_unlockChris Packham
concat_lock() and concat_unlock() only differed in terms of the mtd_xx operation they called. Refactor them to use a common helper function and pass a boolean flag to indicate whether lock or unlock is needed. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-07mtd: afs: remove unneeded NULL checkDing Xiang
NULL check before kfree is unneeded, so remove it. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-07-05mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configurationMiquel Raynal
Allwinner NAND controllers can make use of DMA to enhance the I/O throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP is a bit different than with the older SoCs, hence the introduction of a new compatible to handle: * the differences between register offsets, * the burst length change from 4 to minimum 8, * manage SRAM accesses through MBUS with extra configuration. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-05Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"Miquel Raynal
This reverts commit c49836f05aa15282f7280e06ede3f6f8a6324833. The commit is wrong and its approach actually does not work. Let's revert it in order to add the feature with a clean patch. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-01mtd: rawnand: ingenic: Fix ingenic_ecc dependencyPaul Cercueil
If MTD_NAND_JZ4780 is y and MTD_NAND_JZ4780_BCH is m, which select CONFIG_MTD_NAND_INGENIC_ECC to m, building fails: drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_remove': ingenic_nand.c:(.text+0x177): undefined reference to `ingenic_ecc_release' drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_ecc_correct': ingenic_nand.c:(.text+0x2ee): undefined reference to `ingenic_ecc_correct' To fix that, the ingenic_nand and ingenic_ecc modules have been fused into one single module. - The ingenic_ecc.c code is now compiled in only if $(CONFIG_MTD_NAND_INGENIC_ECC) is set. This is now a boolean instead of tristate. - To avoid changing the module name, the ingenic_nand.c file is moved to ingenic_nand_drv.c. Then the module name is still ingenic_nand. - Since ingenic_ecc.c is no more a module, the module-specific macros have been dropped, and the functions are no more exported for use by the ingenic_nand driver. Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Hulk Robot <hulkci@huawei.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-01mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorgFrieder Schrempf
The 1Gb Macronix chip can have a maximum of 20 bad blocks, while the 2Gb version has twice as many blocks and therefore the maximum number of bad blocks is 40. The 4Gb GigaDevice GD5F4GQ4xA has twice as many blocks as its 2Gb counterpart and therefore a maximum of 80 bad blocks. Fixes: 377e517b5fa5 ("mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg") Reported-by: Emil Lenngren <emil.lenngren@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: stm32_fmc2: increase DMA completion timeoutsAmelie Delaunay
When the system is overloaded, DMA data transfer completion occurs after 100ms. Increase the timeouts to let it the time to complete. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()Fuqian Huang
Replace kmalloc() by a memset() followed with a kzalloc(). There is a recommendation to use zeroing allocator rather than allocator followed by memset(0) in ./scripts/coccinelle/api/alloc/zalloc-simple.cocci Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: hyperbus: Add driver for TI's HyperBus memory controllerVignesh Raghavendra
Add driver for HyperBus memory controller on TI's AM654 SoC. Programming IP is pretty simple and provides direct memory mapped access to connected Flash devices. Add basic support for the IP without DMA. Second chip-select is not supported for now. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: spinand: read returns badly if the last page has bitflipsliaoweixiong
In case of the last page containing bitflips (ret > 0), spinand_mtd_read() will return that number of bitflips for the last page while it should instead return max_bitflips like it does when the last page read returns with 0. Signed-off-by: Weixiong Liao <liaoweixiong@allwinnertech.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: stable@vger.kernel.org Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add initial support for Paragon PN26G0xAJeff Kletsky
Add initial support for Paragon Technology PN26G01Axxxxx and PN26G02Axxxxx SPI NAND Datasheets available at http://www.xtxtech.com/upfile/2016082517274590.pdf http://www.xtxtech.com/upfile/2016082517282329.pdf Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPLXiaolei Li
It is wanted to use MTK NAND driver with GPL-2.0 or MIT license. But now it is only licensed as GPL-2.0, so re-license it as dual MIT/GPL. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Acked-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Wen Yang <yellowriver2010@hotmail.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: RogerCC Lin <rogercc.lin@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove double assignment to block_sizeColin Ian King
The variable block_size is being assigned to itself and to geo->ecc_chunk_size. Clean up the double assignment by removing the assignment to itself. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: When oops in progress use pio and interrupt pollingKamal Dasu
If mtd_oops is in progress, switch to polling during NAND command completion instead of relying on DMA/interrupts so that the mtd_oops buffer can be completely written in the assigned NAND partition. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: Add flag to indicate panic_writeKamal Dasu
Added a flag to indicate a panic_write so that low level drivers can use it to take required action where applicable, to ensure oops data gets written to assigned mtd device. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: Add Macronix NAND read retry supportMason Yang
Add support for Macronix NAND read retry. Macronix NANDs support specific read operation for data recovery, which can be enabled with a SET_FEATURE. Driver checks byte 167 of Vendor Blocks in ONFI parameter page table to see if this high-reliability function is supported. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: onenand: Avoid fall-through warningsGustavo A. R. Silva
NOTICE THAT: "...we don't know whether we need fallthroughs or breaks here and this is just a change to avoid having new warnings when switching to -Wimplicit-fallthrough but this change might be entirely wrong."[1] See the original thread of discussion here: https://lore.kernel.org/patchwork/patch/1036251/ So, in preparation to enabling -Wimplicit-fallthrough, this patch silences the following warnings: drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’: drivers/mtd/nand/onenand/onenand_base.c:3264:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ONENAND_IS_DDP(this)) ^ drivers/mtd/nand/onenand/onenand_base.c:3284:2: note: here case ONENAND_DEVICE_DENSITY_2Gb: ^~~~ drivers/mtd/nand/onenand/onenand_base.c:3288:17: warning: this statement may fall through [-Wimplicit-fallthrough=] this->options |= ONENAND_HAS_UNLOCK_ALL; drivers/mtd/nand/onenand/onenand_base.c:3290:2: note: here case ONENAND_DEVICE_DENSITY_1Gb: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Also, notice that this patch doesn't change any functionality. See the most recent thread of discussion here: https://lore.kernel.org/patchwork/patch/1077395/ This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. [1] https://lore.kernel.org/lkml/20190509085318.34a9d4be@xps13/ Cc: Miquel Raynal <miquel.raynal@bootlin.com> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxGJeff Kletsky
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices and, while it has the same logical layout as the E-series devices, it differs in the SPI interfacing in significant ways. This support is contingent on previous commits to: * Add support for two-byte device IDs * Define macros for page-read ops with three-byte addresses http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/ Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add support for two-byte device IDsJeff Kletsky
The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs. http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/ Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: fallback to detected ecc-strength, ecc-step-sizeKamal Dasu
This change supports nand-ecc-step-size and nand-ecc-strength fields in brcmnand DT node to be optional. see: Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt If both nand-ecc-strength and nand-ecc-step-size are not specified in device tree node for NAND, raw NAND layer does detect ECC information by reading ONFI extended parameter page for parts using ONFI >= 2.1. In case of non-ONFI NAND parts there could be a nand_id table entry with ECC information. If there is valid device tree entry for nand-ecc-strength and nand-ecc-step-size fields it still shall override the detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Implement exec_opSascha Hauer
The gpmi driver performance suffers from NAND operations being split in multiple small DMA transfers. This has been forced by the NAND layer in the former days, but now with exec_op we can use the controller as intended. With this patch gpmi_nfc_exec_op becomes the main entry point to NAND operations. Here all instructions are collected and chained as separate DMA transfers. In the end whole chain is fired and waited to be finished. gpmi_nfc_exec_op only does the hardware operations, bad block marker swapping and buffer scrambling is done by the callers. It's worth noting that the nand_*_op functions always take the buffer lengths for the data that the NAND chip actually transfers. When doing BCH we have to calculate the net data size from the raw data size in some places. This patch has been tested with 2048/64 and 2048/128 byte NAND on i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests from mtdutils run without errors and UBIFS can successfully be mounted. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: rename custom flagSascha Hauer
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Add header file to be shared with gpmi nand driverSascha Hauer
The mxs dma driver can do PIO transfers. A pointer to the PIO words to transfer is passed in the struct scatterlist * argument of dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast u32 * to struct scatterlist * each time when calling dmaengine_prep_slave_sg(), so add a static inline wrapper function to be called by the user along with a description what is going on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: drop unnecessary flagSascha Hauer
The DMA_PREP_INTERRUPT flag is no longer needed by the mxs DMA driver, drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: use runtime PM to manage clocksSascha Hauer
The gpmi driver aggressively en/disables the clocks between operations which has significant performance cost. Use runtime PM to get rid of this bottleneck. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Drop unnecessary restoring of previous chipselectionSascha Hauer
The i.MX23 specific option read code is called right after nand_scan. We can rely on the NAND core having disabled the chipselect, so there's no point in restoring the original chip select after NAND operations. Drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused parametersSascha Hauer
gpmi_ecc_read_page_data uses the page parameter only for a debug printf, so we can drop the parameter and the debug printf. Moving the oob delivery from gpmi_ecc_read_page_data to gpmi_ecc_read_page makes the oob_required parameter unnecessary aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: read buf in nand_read_page_opSascha Hauer
The driver calls nand_read_page_op without a buffer passed and then calls chip->legacy.read_buf to read the buffer afterwards which is the same as passing the buffer nand_read_page_op in the first place. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Remove unnecessary variablesSascha Hauer
this->page_buffer_virt and this->payload_virt are always set to the same value, so drop the former and just use the latter. Same for this->page_buffer_virt and this->payload_virt. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused variableSascha Hauer
The "private" member of struct gpmi_nand_data isn't used anywhere. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: move all driver code into single fileSascha Hauer
This moves the whole driver into a single C file. The filename gpmi-lib implies that it implements library functions, but in fact there are several cases where functions in gpmi-lib.c call back into functions in gpmi-nand.c. With this one has to constantly jump between those two files, so moving it into a single file improves readability, even when the file gets quite large. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: fsmc: Use nand_op_trace for operation tracingSascha Hauer
Replace the different operation tracing functions with a call to nand_op_trace. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: export NAND operation tracerSascha Hauer
The NAND core has a NAND operation tracing function, but it can only be used by drivers using the generic option parser from the NAND core. Export the tracing function as a static inline function in rawnand.h so that drivers implementing exec_op directly do not have to write their own operation tracing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issueXiaolei Li
One main goal of the function mtk_nfc_update_ecc_stats is to check whether sectors are all empty. If they are empty, set these sectors's data buffer and OOB buffer as 0xff. But now, the sector OOB buffer pointer is wrongly assigned. We always do memset from sector 0. To fix this issue, pass start sector number to make OOB buffer pointer be properly assigned. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Add validity check for CE# pin settingXiaolei Li
Currently, we only check how many CE# pins are set in device tree. But it should be necessary to check whether CE# pin setting is duplicated or if CE# pin index exceeds the maximum CE# number that controller supports. So, add validity check to avoid these invalid settings. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Improve data sampling timing for read cycleXiaolei Li
Currently, we expand RE# low level time by choosing the max value between RE# pulse width and RE# access time, and sample data at the rising edge of RE#. Then, if RE# access time is bigger than RE# pulse width, the real read cycle time may be more than NAND SPEC required. This makes read performance be worse than that expected. This patch improves data sampling timing by calculating RE# low level time according to RE# pulse width. If RE# access time is bigger than RE# pulse width, then delay sampling data timing. The result of contrast test base on MT2712 evaluat board is as follow. nand: Micron MT29F16G08ADBCAH4 nand: 2048 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224 NFI 2x clock rate: 124800000 HZ. Read speed without this patch: mtd_speedtest: page read speed is 14012 KiB/s mtd_speedtest: 2 page read speed is 14860 KiB/s Read speed with this patch: mtd_speedtest: page read speed is 18724 KiB/s mtd_speedtest: 2 page read speed is 18713 KiB/s Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Correct low level time calculation of r/w cycleXiaolei Li
At present, the flow of calculating AC timing of read/write cycle in SDR mode is that: At first, calculate high hold time which is valid for both read and write cycle using the max value between tREH_min and tWH_min. Secondly, calculate WE# pulse width using tWP_min. Thridly, calculate RE# pulse width using the bigger one between tREA_max and tRP_min. But NAND SPEC shows that Controller should also meet write/read cycle time. That is write cycle time should be more than tWC_min and read cycle should be more than tRC_min. Obviously, we do not achieve that now. This patch corrects the low level time calculation to meet minimum read/write cycle time required. After getting the high hold time, WE# low level time will be promised to meet tWP_min and tWC_min requirement, and RE# low level time will be promised to meet tREA_max, tRP_min and tRC_min requirement. Fixes: edfee3619c49 ("mtd: nand: mtk: add ->setup_data_interface() hook") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Fix BCH ECC layout for large page NAND partsKamal Dasu
The way oobregion->offset is derived for large page NAND parts is wrong, fixes it. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: onenand: Add support for 8Gb datasize onenandJonathan Bakker
Used in several S5PV210-based Galaxy S devices, among them SGH-T959V, SGH-T959P, SGH-T839, and SPH-D700. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: stm32_fmc2: manage the get_irq error caseFabien Dessenne
During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: use longest matching patternStefan Agner
Sometimes the exec_op parser does not choose the optimal pattern if multiple patterns with optional elements are available. Since the stack automatically splits operations in multiple exec_op calls, a non-optimal pattern gets broken up into multiple calls. E.g. an OOB read using the vf610 driver: nand: executing subop: nand: ->CMD [0x00] nand: ->ADDR [5 cyc: 00 08 ea 94 02] nand: ->CMD [0x30] nand: ->WAITRDY [max 200000 ms] nand: DATA_IN [64 B] nand: executing subop: nand: CMD [0x00] nand: ADDR [5 cyc: 00 08 ea 94 02] nand: CMD [0x30] nand: WAITRDY [max 200000 ms] nand: ->DATA_IN [64 B] However, the vf610 driver has a pattern which can execute the complete command in a single go... This patch makes sure that the longest matching pattern is chosen instead of the first (potentially only partial) match. With this change the vf610 reads the OOB in a single exec_op call: nand: executing subop: nand: ->CMD [0x00] nand: ->ADDR [5 cyc: 00 08 c0 1d 00] nand: ->CMD [0x30] nand: ->WAITRDY [max 200000 ms] nand: ->DATA_IN [64 B] Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: Add support for HyperBus memory devicesVignesh Raghavendra
Cypress' HyperBus is Low Signal Count, High Performance Double Data Rate Bus interface between a host system master and one or more slave interfaces. HyperBus is used to connect microprocessor, microcontroller, or ASIC devices with random access NOR flash memory (called HyperFlash) or self refresh DRAM (called HyperRAM). Its a 8-bit data bus (DQ[7:0]) with Read-Write Data Strobe (RWDS) signal and either Single-ended clock(3.0V parts) or Differential clock (1.8V parts). It uses ChipSelect lines to select b/w multiple slaves. At bus level, it follows a separate protocol described in HyperBus specification[1]. HyperFlash follows CFI AMD/Fujitsu Extended Command Set (0x0002) similar to that of existing parallel NORs. Since HyperBus is x8 DDR bus, its equivalent to x16 parallel NOR flash with respect to bits per clock cycle. But HyperBus operates at >166MHz frequencies. HyperRAM provides direct random read/write access to flash memory array. But, HyperBus memory controllers seem to abstract implementation details and expose a simple MMIO interface to access connected flash. Add support for registering HyperFlash devices with MTD framework. MTD maps framework along with CFI chip support framework are used to support communicating with flash. Framework is modelled along the lines of spi-nor framework. HyperBus memory controller (HBMC) drivers calls hyperbus_register_device() to register a single HyperFlash device. HyperFlash core parses MMIO access information from DT, sets up the map_info struct, probes CFI flash and registers it with MTD framework. Some HBMC masters need calibration/training sequence[3] to be carried out, in order for DLL inside the controller to lock, by reading a known string/pattern. This is done by repeatedly reading CFI Query Identification String. Calibration needs to be done before trying to detect flash as part of CFI flash probe. HyperRAM is not supported at the moment. HyperBus specification can be found at[1] HyperFlash datasheet can be found at[2] [1] https://www.cypress.com/file/213356/download [2] https://www.cypress.com/file/213346/download [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf Table 12-5741. HyperFlash Access Sequence Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: cfi_cmdset_0002: Add support for polling status registerVignesh Raghavendra
HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command Set (0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c can be used as is. But these devices do not support DQ polling method of determining chip ready/good status. These flashes provide Status Register whose bits can be polled to know status of flash operation. Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu Extended Query version 1.5. Bit 0 of "Software Features supported" field of CFI Primary Vendor-Specific Extended Query table indicates presence/absence of status register and Bit 1 indicates whether or not DQ polling is supported. Using these bits, its possible to determine whether flash supports DQ polling or need to use Status Register. Add support for polling Status Register to know device ready/status of erase/write operations when DQ polling is not supported. Print error messages on erase/program failure by looking at related Status Register bits. [1] https://www.cypress.com/file/213346/download Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit (git 2.34.1) at 2024-06-09 06:44:14 +0000