summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
AgeCommit message (Collapse)Author
2011-02-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000e/netdev.c
2011-02-06bnx2x: Proper netdev->ndo_set_rx_mode() implementation.Vladislav Zolotarov
Completed the bnx2x_set_rx_mode() to a proper netdev->ndo_set_rx_mode implementation: - Added a missing configuration of a unicast MAC addresses list. - Changed bp->dma_lock from being a mutex to a spinlock as long as it's taken under netdev->addr_list_lock now. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: Duplication in promisc modeVladislav Zolotarov
Prevent packets duplication for frames targeting FCoE L2 ring: packets were arriving to stack from both L2 RSS and from FCoE L2 in a promiscuous mode. Configure FCoE L2 ring to DROP_ALL rx mode, when interface is configured to PROMISC, and to accept only unicast frames, when interface is configured to ALL_MULTI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06bnx2x: MTU for FCoE L2 ringVladislav Zolotarov
Always configure an FCoE L2 ring with a mini-jumbo MTU size (2500). To do that we had to move the rx_buf_size parameter from per function level to a per ring level. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-02-01bnx2x: multicasts in NPAR modeVladislav Zolotarov
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x, cnic: Consolidate iSCSI/FCoE shared mem logic in bnx2xVladislav Zolotarov
Move all shared mem code to bnx2x to avoid code duplication. bnx2x now performs: - Read the FCoE and iSCSI max connection information. - Read the iSCSI and FCoE MACs from NPAR configuration in shmem. - Block the CNIC for the current function if there is neither FCoE nor iSCSI valid configuration by returning NULL from bnx2x_cnic_probe(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Update bnx2x version to 1.62.11-0Yaniv Rosner
Update bnx2x version to 1.62.11-0 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner
Remove unneeded support for emulation/FPGA from the code Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner
Add CMS(Common Mode Sense) functionality for 848x3 as this reduces power consumption and allows a better 10G link stability Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner
Add support for new PHY BCM84833. This PHY is very similar to the BCM84823, only it has different register offset compared to the BCM84823, which needs to be handled correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner
Add flexible support to control various SFP+ module features either throughout MDIO registers or GPIO pins according to NVRAM configuration Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner
Add and modify some net dev prints to improve error control Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner
Fix annoying compilation warning, mainly related to static declarations Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner
This patch contains cosmetic changes only of restyling comments according to Linux coding standard, and add comment for get_emac_base function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner
This patch contains cosmetic changes only of renaming CL45_WR_OVER_CL22 macro to CL22_WR_OVER_CL45 as it should be. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix line indentationYaniv Rosner
This patch contains cosmetic changes only to fix code alignment, and update copyright comment year Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-30bnx2x: Update bnx2x version to 1.62.00-5Yaniv Rosner
Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix potential link loss in multi-function modeYaniv Rosner
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner
Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27drivers/net: remove some rcu sparse warningsEric Dumazet
Add missing __rcu annotations and helpers. minor : Fix some rcu_dereference() calls in macvtap Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) sctp: user perfect name for Delayed SACK Timer option net: fix can_checksum_protocol() arguments swap Revert "netlink: test for all flags of the NLM_F_DUMP composite" gianfar: Fix misleading indentation in startup_gfar() net/irda/sh_irda: return to RX mode when TX error net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan. USB CDC NCM: tx_fixup() race condition fix ns83820: Avoid bad pointer deref in ns83820_init_one(). ipv6: Silence privacy extensions initialization bnx2x: Update bnx2x version to 1.62.00-4 bnx2x: Fix AER setting for BCM57712 bnx2x: Fix BCM84823 LED behavior bnx2x: Mark full duplex on some external PHYs bnx2x: Fix BCM8073/BCM8727 microcode loading bnx2x: LED fix for BCM8727 over BCM57712 bnx2x: Common init will be executed only once after POR bnx2x: Swap BCM8073 PHY polarity if required iwlwifi: fix valid chain reading from EEPROM ath5k: fix locking in tx_complete_poll_work ath9k_hw: do PA offset calibration only on longcal interval ...
2011-01-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-18bnx2x: Update bnx2x version to 1.62.00-4Yaniv Rosner
Update bnx2x version to 1.62.00-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix AER setting for BCM57712Yaniv Rosner
Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM84823 LED behaviorYaniv Rosner
Fix BCM84823 LED behavior which may show on some systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Mark full duplex on some external PHYsYaniv Rosner
Device may show incorrect duplex mode for devices with external PHY Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Fix BCM8073/BCM8727 microcode loadingYaniv Rosner
Improve microcode loading verification before proceeding to next stage Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: LED fix for BCM8727 over BCM57712Yaniv Rosner
LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Common init will be executed only once after PORYaniv Rosner
Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode. However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-18bnx2x: Swap BCM8073 PHY polarity if requiredYaniv Rosner
Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-09bnx2x: Fix the race on bp->stats_pending.Vladislav Zolotarov
Fix the race on bp->stats_pending between the timer and a LINK_UP event handler. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: Move to D0 before clearing MSI/MSI-X configuration.Vladislav Zolotarov
Move to D0 before clearing MSI/MSI-X configuration. Otherwise MSI/MSI-X won't be cleared. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: registers dump fixesVladislav Zolotarov
Fixes in registers dump: - Properly calculate dump length for 57712. - Prevent HW blocks parity attentions when dumping registers in order to prevent false parity errors handling. - Update the bnx2x_dump.h file: old one had a few bugs that could cause fatal HW error as a result of a registers dump. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-09bnx2x: Don't prevent RSS configuration in INT#x and MSI interrupt modes.Vladislav Zolotarov
Don't prevent RSS configuration in INT#x and MSI interrupt modes. Otherwise Rx hash key won't be available. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2x: adding dcbnl supportShmulik Ravid
Adding dcbnl implementation to bnx2x allowing users to manage the embedded DCBX engine. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-21Merge branch '20101221_static_const' of git://repo.or.cz/linux-2.6/trivial-modsDavid S. Miller
2010-12-21bnx2x: remove bogus checkDan Carpenter
We dereferenced params on the line before so it's too late to check if params is NULL. In fact, params can never be NULL and strict_cos is either 0 or 1 so that part of the check is bogus too. Let's remove it. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*/: Use static constJoe Perches
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-16bnx2x: update version to 1.62.00-2Vladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: replace FW to 6.2.5Vladislav Zolotarov
Includes FCoE releated fixes in FW flows Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov
Add appropriate HW DCB/PFC configuration Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add DCB supportVladislav Zolotarov
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add a select queue callbackVladislav Zolotarov
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FCoE ringVladislav Zolotarov
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-06-12 05:11:05 +0000