summaryrefslogtreecommitdiff
path: root/drivers/net/bonding/bond_alb.c
AgeCommit message (Collapse)Author
2020-03-06bonding/alb: make sure arp header is pulled before accessing itEric Dumazet
Similar to commit 38f88c454042 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05bonding/alb: properly access headers in bond_alb_xmit()Eric Dumazet
syzbot managed to send an IPX packet through bond_alb_xmit() and af_packet and triggered a use-after-free. First, bond_alb_xmit() was using ipx_hdr() helper to reach the IPX header, but ipx_hdr() was using the transport offset instead of the network offset. In the particular syzbot report transport offset was 0xFFFF This patch removes ipx_hdr() since it was only (mis)used from bonding. Then we need to make sure IPv4/IPv6/IPX headers are pulled in skb->head before dereferencing anything. BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108 (if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: [<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53 [<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282 [<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline] [<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline] [<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422 [<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469 [<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 [<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline] [<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224 [<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline] [<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline] [<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline] [<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627 [<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238 [<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278 [<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline] [<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252 [<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684 [<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996 [<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline] [<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09bonding/alb: convert to using slave printk macrosJarod Wilson
All of these printk instances benefit from having both master and slave device information included, so convert to using a standardized macro format and remove redundant information. Suggested-by: Joe Perches <joe@perches.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses the full gnu general public license is included in this distribution in the file called license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.052102771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13net: dev: Add extack argument to dev_set_mac_address()Petr Machata
A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which allows vetoing of MAC address changes. One prominent path to that notification is through dev_set_mac_address(). Therefore give this function an extack argument, so that it can be packed together with the notification. Thus a textual reason for rejection (or a warning) can be communicated back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: allow use of tx hashing in balance-albDebabrata Banerjee
The rx load balancing provided by balance-alb is not mutually exclusive with using hashing for tx selection, and should provide a decent speed increase because this eliminates spinlocks and cache contention. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: use common mac addr checksDebabrata Banerjee
Replace homegrown mac addr checks with faster defs from etherdevice.h Note that this will also prevent any rlb arp updates for multicast addresses, however this should have been forbidden anyway. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: don't queue up extraneous rlb updatesDebabrata Banerjee
arps for incomplete entries can't be sent anyway. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: replace the return value typeTonghao Zhang
The method ndo_start_xmit is defined as returning a netdev_tx_t, which is a typedef for an enum type, but the implementation in this driver returns an int. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: send learning packets for vlans on slaveDebabrata Banerjee
There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: do not allow rlb updates to invalid macDebabrata Banerjee
Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05bonding: attempt to better support longer hw addressesJarod Wilson
People are using bonding over Infiniband IPoIB connections, and who knows what else. Infiniband has a hardware address length of 20 octets (INFINIBAND_ALEN), and the network core defines a MAX_ADDR_LEN of 32. Various places in the bonding code are currently hard-wired to 6 octets (ETH_ALEN), such as the 3ad code, which I've left untouched here. Besides, only alb is currently possible on Infiniband links right now anyway, due to commit 1533e7731522, so the alb code is where most of the changes are. One major component of this change is the addition of a bond_hw_addr_copy function that takes a length argument, instead of using ether_addr_copy everywhere that hardware addresses need to be copied about. The other major component of this change is converting the bonding code from using struct sockaddr for address storage to struct sockaddr_storage, as the former has an address storage space of only 14, while the latter is 128 minus a few, which is necessary to support bonding over device with up to MAX_ADDR_LEN octet hardware addresses. Additionally, this probably fixes up some memory corruption issues with the current code, where it's possible to write an infiniband hardware address into a sockaddr declared on the stack. Lightly tested on a dual mlx4 IPoIB setup, which properly shows a 20-octet hardware address now: $ cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active) Primary Slave: mlx4_ib0 (primary_reselect always) Currently Active Slave: mlx4_ib0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 100 Down Delay (ms): 100 Slave Interface: mlx4_ib0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 80:00:02:08:fe:80:00:00:00:00:00:00:e4:1d:2d:03:00:1d:67:01 Slave queue ID: 0 Slave Interface: mlx4_ib1 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 80:00:02:09:fe:80:00:00:00:00:00:01:e4:1d:2d:03:00:1d:67:02 Slave queue ID: 0 Also tested with a standard 1Gbps NIC bonding setup (with a mix of e1000 and e1000e cards), running LNST's bonding tests. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: bonding: Flip to the new dev walk APIDavid Ahern
Convert alb_send_learning_packets and bond_has_this_ip to use the new netdev_walk_all_upper_dev_rcu API. In both cases this is just a code conversion; no functional change is intended. v2 - removed typecast of data and simplified bond_upper_dev_walk Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01bonding: prevent out of bound accessesEric Dumazet
ether_addr_equal_64bits() requires some care about its arguments, namely that 8 bytes might be read, even if last 2 byte values are not used. KASan detected a violation with null_mac_addr and lacpdu_mcast_addr in bond_3ad.c Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c : Although the 8-byte alignment was there, KASan would detect out of bound accesses. Fixes: 815117adaf5b ("bonding: use ether_addr_equal_unaligned for bond addr compare") Fixes: bb54e58929f3 ("bonding: Verify RX LACPDU has proper dest mac-addr") Fixes: 885a136c52a8 ("bonding: use compare_ether_addr_64bits() in ALB") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11bonding: Return correct error codeAmitoj Kaur Chawla
The return value of kzalloc on failure of allocation of memory should be -ENOMEM and not -1. Found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; @@ e = kzalloc(...); if (e == NULL) { ... return - -1 + -ENOMEM ; } //</smpl> The single call site only checks that the return value is not 0, hence no change is required at the call site. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: kill vlan_put_tag helperJiri Pirko
Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10net: Move bonding headers under include/netDavid S. Miller
This ways drivers like cxgb4 don't need to do ugly relative includes. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-31bonding: add bond_tx_drop() helperEric Dumazet
Because bonding stats are usually sum of slave stats, it was not easy to account for tx drops at bonding layer. We can use dev->tx_dropped for this, as this counter is later added to the device stats (in dev_get_stats()) This extends the idea we had in commit ee6377147409a ("bonding: Simplify the xmit function for modes that use xmit_hash") for bond_3ad_xor_xmit() to other bonding modes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06bonding: Simplify the xmit function for modes that use xmit_hashMahesh Bandewar
Earlier change to use usable slave array for TLB mode had an additional performance advantage. So extending the same logic to all other modes that use xmit-hash for slave selection (viz 802.3AD, and XOR modes). Also consolidating this with the earlier TLB change. The main idea is to build the usable slaves array in the control path and use that array for slave selection during xmit operation. Measured performance in a setup with a bond of 4x1G NICs with 200 instances of netperf for the modes involved (3ad, xor, tlb) cmd: netperf -t TCP_RR -H <TargetHost> -l 60 -s 5 Mode TPS-Before TPS-After 802.3ad : 468,694 493,101 TLB (lb=0): 392,583 392,965 XOR : 475,696 484,517 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bonding: trivial: style and comment fixesNikolay Aleksandrov
First adjust a couple of locking comments that were left inaccurate, then adjust comments to use the netdev styling and remove extra new lines where necessary and add a couple of new lines between declarations and code. These are all trivial styling changes, no functional change. Also removed a couple of outdated or obvious comments. This patch is by no means a complete fix of all netdev style violations but it gets the bonding closer. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bonding: consolidate the two rlb_next_rx_slave functions into oneNikolay Aleksandrov
__rlb_next_rx_slave() is a copy of rlb_next_rx_slave() with the difference that it uses rcu primitives to walk the slave list. We don't need the two functions and can make rlb_next_rx_slave() a wrapper for callers which hold RTNL. So add a comment and ASSERT_RTNL() to make sure what is intended. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: adjust locking commentsNikolay Aleksandrov
Now that locks have been removed, remove some unnecessary comments and adjust others to reflect reality. Also add a comment to "mode_lock" to describe its current users and give a brief summary why they need it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: alb: convert to bond->mode_lockNikolay Aleksandrov
The ALB/TLB specific spinlocks are no longer necessary as we now have bond->mode_lock for this purpose, so convert them and remove them from struct alb_bond_info. Also remove the unneeded lock/unlock functions and use spin_lock/unlock directly. Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: clean curr_slave_lock useNikolay Aleksandrov
Mostly all users of curr_slave_lock already have RTNL as we've discussed previously so there's no point in using it, the one case where the lock must stay is the 3ad code, in fact it's the only one. It's okay to remove it from bond_do_fail_over_mac() as it's called with RTNL and drops the curr_slave_lock anyway. bond_change_active_slave() is one of the main places where curr_slave_lock was used, it's okay to remove it as all callers use RTNL these days before calling it, that's why we move the ASSERT_RTNL() in the beginning to catch any potential offenders to this rule. The RTNL argument actually applies to all of the places where curr_slave_lock has been removed from in this patch. Also remove the unnecessary bond_deref_active_protected() macro and use rtnl_dereference() instead. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13bonding: alb: remove curr_slave_lockNikolay Aleksandrov
First in rlb_teach_disabled_mac_on_primary() it's okay to remove curr_slave_lock as all callers except bond_alb_monitor() already hold RTNL, and in case bond_alb_monitor() is executing we can at most have a period with bad throughput (very unlikely though). In bond_alb_monitor() it's okay to remove the read_lock as the slave list is walked with RCU and the worst that could happen is another transmitter at the same time and thus for a period which currently is 10 seconds (bond_alb.h: BOND_ALB_LP_TICKS). And bond_alb_handle_active_change() is okay because it's always called with RTNL. Removed the ASSERT_RTNL() because it'll be inserted in the parent function in a following patch. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09bonding: alb: clean bond->lockNikolay Aleksandrov
We can remove the lock/unlock as it's no longer necessary since RTNL should be held while calling bond_alb_set_mac_address(). Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bonding: Replace rcu_dereference() with rcu_access_pointer()Andreea-Cristina Bernat
This "rcu_dereference()" call is used directly in a condition. Since its return value is never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes this replacement. The following Coccinelle semantic patch was used for solving it: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-20bonding: make it possible to have unlimited nested upper vlansVeaceslav Falico
Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16bonding: Do not try to send packets over dead link in TLB mode.Mahesh Bandewar
In TLB mode if tlb_dynamic_lb is NOT set, slaves from the bond group are selected based on the hash distribution. This does not exclude dead links which are part of the bond. Also if there is a temporary link event which brings down the interface, packets hashed on that interface would be dropped too. This patch fixes these issues and distributes flows across the UP links only. Also the array construction of links which are capable of sending packets happen in the control path leaving only link-selection during the data-path. One possible side effect of this is - at a link event; all flows will be shuffled to get good distribution. But impact of this should be minimum with the assumption that a member or members of the bond group are not available is a very temporary situation. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15bonding: remove pr_fmt from bond_alb.cVeaceslav Falico
To maintain the same message structure as netdev_* functions print. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15bonding: convert bond_alb.c to use netdev_printk instead of pr_Veaceslav Falico
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15bonding: add proper __rcu annotation for curr_active_slaveEric Dumazet
RCU was added to bonding in linux-3.12 but lacked proper sparse annotations. Using __rcu annotation actually helps to spot all accesses to bond->curr_active_slave are correctly protected, with LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04bonding: Support macvlans on top of tlb/rlb mode bondsVlad Yasevich
To make TLB mode work, the patch allows learning packets to be sent using mac addresses assigned to macvlan devices, also taking into an account vlans that may be between the bond and macvlan device. To make RLB work, all we have to do is accept ARP packets for addresses added to the bond dev->uc list. Since RLB mode will take care to update the peers directly with correct mac addresses, learning packets for these addresses do not have be send to switch. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22bonding: Send ALB learning packets using the right sourceVlad Yasevich
ALB learning packets are currentlyalways sent using the slave mac address for all vlans configured on top of bond. This is not always correct, as vlans may change their mac address. This patch introduced a concept of strict matching where the source of learning packets can either strictly match the address passed in, or it can determine a more correct address to use. There are 3 casese to consider: 1) Switchover. In this case, we have a new active slave and we need tell the switch about all addresses available on the slave. 2) Monitor. We'll periodically refresh learning info for all slaves. In this case, we refresh all addresses for current active, and just the slave address for other slaves. 3) Teaching of disabled adddress. This happens as part of the failover and in this case, we alwyas to use just the address provided. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22bonding: Don't assume 802.1Q when sending alb learning packets.Vlad Yasevich
TLB/ALB learning packets always assume 802.1Q vlan protocol, but that is no longer the case since we now have support for Q-in-Q on top of bonding. Pass the vlan protocol to alb_send_lp_vid() so that the packets are properly tagged. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bonding: Fix alb mode to only use first level vlans.Vlad Yasevich
ALB/TLB learning packets use all vlans configured on top of the bond. This ends up being incorrect if we have a stack of vlans on top of the bond. ALB/TLB should only use first level/outer most vlans in its announcements. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bonding: replace SLAVE_IS_OK() with bond_slave_can_tx()Veaceslav Falico
They're verifying the same thing (except of IFF_UP, which is implied for netif_running(), which is also a prerequisite). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bonding: create a macro for bond mode and use itVeaceslav Falico
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24bonding: Add tlb_dynamic_lb parameter for tlb modeMahesh Bandewar
The aggresive load balancing causes packet re-ordering as active flows are moved from a slave to another within the group. Sometime this aggresive lb is not necessary if the preference is for less re-ordering. This parameter if used with value "0" disables this dynamic flow shuffling minimizing packet re-ordering. Of course the side effect is that it has to live with the static load balancing that the hashing distribution provides. This impact is less severe if the correct xmit-hashing-policy is used for the tlb setup. The default value of the parameter is set to "1" mimicing the earlier behavior. Ran the netperf test with 200 stream for 1 min between two hosts with 4x1G trunk (xmit-lb mode with xmit-policy L3+4) before and after these changes. Following was the command used for those 200 instances - netperf -t TCP_RR -l 60 -s 5 -H <host> -- -r81920,81920 Transactions per second: Before change: 1,367.11 After change: 1,470.65 Change-Id: Ie3f75c77282cf602e83a6e833c6eb164e72a0990 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24bonding: Added bond_tlb_xmit() for tlb mode.Mahesh Bandewar
Re-organized the xmit function for the lb mode separating tlb xmit from the alb mode. This will enable use of the hashing policies like 802.3ad mode. Also extended use of xmit-hash-policy to tlb mode. Now the tlb-mode defaults to BOND_XMIT_POLICY_LAYER2 if the xmit policy module parameter is not set (just like 802.3ad, or Xor mode). Change-Id: I140257403d272df75f477b380207338d0f04963e Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24bonding: Reorg bond_alb_xmit codeMahesh Bandewar
Separating the actual xmit part from the function in a separate function that can be used in the tlb_xmit in the next patch. Also there is no reason do_tx_balance to be an int so changing it to bool type. Change-Id: I9c48ff30487810f68587e621a191db616f49bd3b Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14bonding: use the correct ether type for albVeaceslav Falico
Currently it's using the wrong ETH_P_LOOP type, which is sometimes treated as packet length instead of ether type (because it's 0x0060). Use the new ETH_P_LOOPBACK type. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13bonding: set correct vlan id for alb xmit pathdingtianhong
The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e (bonding: use rlb_client_info->vlan_id instead of ->tag) remove the rlb_client_info->tag, but occur some issues, The vlan_get_tag() will return 0 for success and -EINVAL for error, so the client_info->vlan_id always be set to 0 if the vlan_get_tag return 0 for success, so the client_info would never get a correct vlan id. We should only set the vlan id to 0 when the vlan_get_tag return error. Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag) CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-13 03:47:44 +0000