summaryrefslogtreecommitdiff
path: root/drivers/net/can/usb
AgeCommit message (Collapse)Author
2021-04-01drivers: net: fix memory leak in peak_usb_create_devPavel Skripkin
syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Various fixes, all over: 1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu. 2) Always store the rx queue mapping in veth, from Maciej Fijalkowski. 3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov. 4) Fix memory leak in octeontx2-af from Colin Ian King. 5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from Yonghong Song. 6) Fix tx ptp stats in mlx5, from Aya Levin. 7) Check correct ip version in tun decap, fropm Roi Dayan. 8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit. 9) Work item memork leak in mlx5, from Shay Drory. 10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann. 11) Lack of preemptrion awareness in macvlan, from Eric Dumazet. 12) Fix data race in pxa168_eth, from Pavel Andrianov. 13) Range validate stab in red_check_params(), from Eric Dumazet. 14) Inherit vlan filtering setting properly in b53 driver, from Florian Fainelli. 15) Fix rtnl locking in igc driver, from Sasha Neftin. 16) Pause handling fixes in igc driver, from Muhammad Husaini Zulkifli. 17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits. 18) Use after free in qlcnic, from Lv Yunlong. 19) fix crash in fritzpci mISDN, from Tong Zhang. 20) Premature rx buffer reuse in igb, from Li RongQing. 21) Missing termination of ip[a driver message handler arrays, from Alex Elder. 22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25 driver, from Xie He. 23) Use after free in c_can_pci_remove(), from Tong Zhang. 24) Uninitialized variable use in nl80211, from Jarod Wilson. 25) Off by one size calc in bpf verifier, from Piotr Krysiuk. 26) Use delayed work instead of deferrable for flowtable GC, from Yinjun Zhang. 27) Fix infinite loop in NPC unmap of octeontx2 driver, from Hariprasad Kelam. 28) Fix being unable to change MTU of dwmac-sun8i devices due to lack of fifo sizes, from Corentin Labbe. 29) DMA use after free in r8169 with WoL, fom Heiner Kallweit. 30) Mismatched prototypes in isdn-capi, from Arnd Bergmann. 31) Fix psample UAPI breakage, from Ido Schimmel" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits) psample: Fix user API breakage math: Export mul_u64_u64_div_u64 ch_ktls: fix enum-conversion warning octeontx2-af: Fix memory leak of object buf ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation net: bridge: don't notify switchdev for local FDB addresses net/sched: act_ct: clear post_ct if doing ct_clear net: dsa: don't assign an error value to tag_ops isdn: capi: fix mismatched prototypes net/mlx5: SF, do not use ecpu bit for vhca state processing net/mlx5e: Fix division by 0 in mlx5e_select_queue net/mlx5e: Fix error path for ethtool set-priv-flag net/mlx5e: Offload tuple rewrite for non-CT flows net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP net/mlx5: Add back multicast stats for uplink representor net: ipconfig: ic_dev can be NULL in ic_close_devs MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one docs: networking: Fix a typo r8169: fix DMA being used after buffer free if WoL is enabled net: ipa: fix init header command validation ...
2021-03-20can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"Marc Kleine-Budde
In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch. Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky <leon@kernel.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-16can: kvaser_usb: Add support for USBcan Pro 4xHSJimmy Assarsson
Add support for Kvaser USBcan Pro 4xHS. Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: peak_usb: add forgotten supported devicesStephane Grosjean
Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices. Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-27can: mcba_usb: remove h from printk format specifierTom Rix
This change fixes the checkpatch warning described in this commit commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Link: https://lore.kernel.org/r/20210124150916.1920434-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/can/dev.c commit 03f16c5075b2 ("can: dev: can_restart: fix use after free bug") commit 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") Code move. drivers/net/dsa/b53/b53_common.c commit 8e4052c32d6b ("net: dsa: b53: fix an off by one in checking "vlan->vid"") commit b7a9e0da2d1c ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects") Field rename. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_get_echo_skb(): extend to return can frame lengthMarc Kleine-Budde
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack after queueing and after transmission completion. To avoid to calculate this length twice, extend can_get_echo_skb() to return that value. Convert all users of this function, too. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_put_echo_skb(): extend to handle frame_lenVincent Mailhol
Add a frame_len argument to can_put_echo_skb() which is used to save length of the CAN frame into field frame_len of struct can_skb_priv so that it can be later used after transmission completion. Convert all users of this function, too. Drivers which implement BQL call can_put_echo_skb() with the output of can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an input (in the same way that NULL would be given to can_get_echo_skb()). This way, we have a nice symmetry between the two echo functions. Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
2020-11-29can: pcan_usb_core: fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by moving the "default" to the end of the "switch" statement and explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: http://lore.kernel.org/r/aab7cf16bf43cc7c3e9c9930d2dae850c1d07a3c.1605896059.git.gustavoars@kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> [mkl: move default to end] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-26can: gs_usb: fix endianess problem with candleLight firmwareMarc Kleine-Budde
The firmware on the original USB2CAN by Geschwister Schneider Technologie Entwicklungs- und Vertriebs UG exchanges all data between the host and the device in host byte order. This is done with the struct gs_host_config::byte_order member, which is sent first to indicate the desired byte order. The widely used open source firmware candleLight doesn't support this feature and exchanges the data in little endian byte order. This breaks if a device with candleLight firmware is used on big endianess systems. To fix this problem, all u32 (but not the struct gs_host_frame::echo_id, which is a transparent cookie) are converted to __le32. Cc: Maximilian Schneider <max@schneidersoft.net> Cc: Hubert Denkmair <hubert@denkmair.de> Reported-by: Michael Rausch <mr@netadair.de> Link: https://lore.kernel.org/r/b58aace7-61f3-6df7-c6df-69fee2c66906@netadair.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/r/20201120103818.3386964-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20can: kvaser_usb: Add new Kvaser hydra devicesJimmy Assarsson
Add new Kvaser hydra devices. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-6-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: kvaser_usb: kvaser_usb_hydra: Add support for new device variantChrister Beskow
Add support for a new variant of devices using the hydra platform, based on NXP i.MX RT (flexcan). Signed-off-by: Christer Beskow <chbe@kvaser.com> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-5-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: kvaser_usb: Add new Kvaser Leaf v2 devicesJimmy Assarsson
Add new Kvaser Leaf v2 devices. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-4-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END definesJimmy Assarsson
Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines, representing the last USB PID entry in respectively family. This removes the need to update the kvaser_is_{leaf,hydra}() functions whenever new devices are added. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-3-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: drivers: add len8_dlc support for esd_usb2 CAN adapterStefan Mätje
Support the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15 for the Classical CAN capable CAN network driver esd_usb that supports the esd CAN-USB/2 and CAN-USB/Micro devices: - esd_usb2 Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Tested-by: Stefan Mätje <stefan.maetje@esd.eu> Link: https://lore.kernel.org/r/20201116184430.25462-2-stefan.maetje@esd.eu [mkl: rewrapped some long lines] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: drivers: add len8_dlc support for various CAN adaptersOliver Hartkopp
Support the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15 on various Classical CAN capable CAN network drivers: - sja1000 - gs_usb - pcan_usb - pcan_usb_fd - usb_8dev Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201111095923.2535-1-socketcan@hartkopp.net [mkl: usb_8dev: changed indention] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: rename CAN FD related can_len2dlc and can_dlc2len helpersOliver Hartkopp
The helper functions can_len2dlc and can_dlc2len are only relevant for CAN FD data length code (DLC) conversion. To fit the introduced can_cc_dlc2len for Classical CAN we rename: can_dlc2len -> can_fd_dlc2len to get the payload length from the DLC can_len2dlc -> can_fd_len2dlc to get the DLC from the payload length Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-6-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: remove obsolete get_canfd_dlc() macroOliver Hartkopp
The macro was always used together with can_dlc2len() which sanitizes the given dlc value on its own. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-4-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: rename get_can_dlc() macro with can_cc_dlc2len()Oliver Hartkopp
The get_can_dlc() macro is used to ensure the payload length information of the Classical CAN frame to be max 8 bytes (the CAN_MAX_DLEN). Rename the macro and use the correct constant in preparation of the len/dlc cleanup for Classical CAN frames. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-3-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-18can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limitsJimmy Assarsson
Use correct bittiming limits for the KCAN CAN controller. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-2-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: peak_usb: fix potential integer overflow on shift of a intColin Ian King
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then assigned to a signed 64 bit variable. In the case where time_ref->adapter->ts_used_bits is 32 or more this can lead to an oveflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201105112427.40688-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to ↵Marc Kleine-Budde
can_put_echo_skb() The driver has to first fill the skb with data and then handle it to can_put_echo_skb(). This patch moves the can_put_echo_skb() down, right before sending the skb out via USB. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Link: https://lore.kernel.org/r/20201111221204.1639007-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrappingStephane Grosjean
Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface (only), related to the fact that a timestamp of an event may precede the timestamp used for synchronization when both records are part of the same USB packet. However, this case was used to detect the wrapping of the time counter. This patch details and fixes the two identified cases where this problem can occur. Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-03can: peak_usb: add range checking in decode operationsDan Carpenter
These values come from skb->data so Smatch considers them untrusted. I believe Smatch is correct but I don't have a way to test this. The usb_if->dev[] array has 2 elements but the index is in the 0-15 range without checks. The cfd->len can be up to 255 but the maximum valid size is CANFD_MAX_DLEN (64) so that could lead to memory corruption. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200813140604.GA456946@mwanda Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: add support of rxerr/txerr countersStephane Grosjean
This patch adds the support of the rx/tx errors CAN counters to the driver of the PCAN-USB PC-CAN interface from PEAK-System GmbH. The PCAN-USB is capable of giving back the values of the rx/tx errors counters, to provide more details and statistics to the linux-can layer. Getting these values allows the driver to better tune CAN_ERR_CRTL_TX_xxx and CAN_ERR_CRTL_RX_xxx bits in case of the interface enters any CAN_STATE_ERROR_xxx state. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-3-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: pcan_usb: Document the commands sent to the deviceStephane Grosjean
This patch documents the functions and numbers of the commands sent by the driver to the PCAN-USB CAN device from PEAK-System GmbH. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20191206153803.17725-2-s.grosjean@peak-system.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: peak_usb: convert to use le32_add_cpu()Liu Shixin
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu(). Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200914041744.3701840-1-liushixin2@huawei.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: mcba_usb: remove redundant initialization of variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200706164240.518623-1-colin.king@canonical.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: drivers: fix spelling mistakesMarc Kleine-Budde
This patch fixes spelling erros found by "codespell" in the drivers/net/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-02can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: kvaser_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-08can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devicesXiaolong Huang
Uninitialized Kernel memory can leak to USB devices. Fix this by using kzalloc() instead of kmalloc(). Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Cc: linux-stable <stable@vger.kernel.org> # >= v4.19 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: ucan: fix non-atomic allocation in completion handlerJohan Hovold
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: Martin Elshuber <martin.elshuber@theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: report bus recovery as wellJeroen Hofstee
While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: fix slab info leakJohan Hovold
Fix a small slab info leak due to a failure to clear the command buffer at allocation. The first 16 bytes of the command buffer are always sent to the device in pcan_usb_send_cmd() even though only the first two may have been initialised in case no argument payload is provided (e.g. when waiting for a response). Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Cc: stable <stable@vger.kernel.org> # 3.4 Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: peak_usb: fix a potential out-of-sync while decoding packetsStephane Grosjean
When decoding a buffer received from PCAN-USB, the first timestamp read in a packet is a 16-bit coded time base, and the next ones are an 8-bit offset to this base, regardless of the type of packet read. This patch corrects a potential loss of synchronization by using a timestamp index read from the buffer, rather than an index of received data packets, to determine on the sizeof the timestamp to be read from the packet being decoded. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: usb_8dev: fix use-after-free on disconnectJohan Hovold
The driver was accessing its driver data after having freed it. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Cc: stable <stable@vger.kernel.org> # 3.9 Cc: Bernd Krumboeck <b.krumboeck@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: mcba_usb: fix use-after-free on disconnectJohan Hovold
The driver was accessing its driver data after having freed it. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com> Reported-by: syzbot+e29b17e5042bbc56fae9@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-11-04can: gs_usb: gs_can_open(): prevent memory leakNavid Emamdoost
In gs_can_open() if usb_submit_urb() fails the allocated urb should be released. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...
generated by cgit (git 2.34.1) at 2024-06-26 07:02:39 +0000