summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/b53/b53_common.c
AgeCommit message (Collapse)Author
2024-05-30net: use phylink_mode_*() helpersRussell King (Oracle)
Use the phylink_mode_*() helpers in all drivers so we can change the definition of the "mode" argument. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-05-24net: dsa: b53: provide own phylink MAC operationsFlorian Fainelli
Convert b53 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-9-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Remove b53_adjust_link()Florian Fainelli
Only use the PHYLINK implementation from there on now that an equivalent configuration is applied to all of the switch ports. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-8-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Call b53_eee_init() from b53_mac_link_up()Florian Fainelli
And make sure this is done for the MLO_AN_PHY case, where it actually makes sense, contrary to b53_adjust_link() which only did it for fixed-PHY configurations where it does not make sense. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-7-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Configure RGMII for 531x5 and MII for 5325Florian Fainelli
Call b53_adjust_531x5_rgmii() and b53_adjust_5325_mii() from b53_phylink_mac_config() when we have a fixed PHY in preparation for removing b53_adjust_link(). Also move b53_adjust_63xx_rgmii() to b53_phylink_mac_config() where it logically belongs. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-6-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Force flow control for BCM5301X CPU port(s)Florian Fainelli
Just like what b53_adjust_link() does, force flow control for the BCM5301X CPU port(s) by forcing rx_pause and tx_pause in b53_phylink_mac_link_up(). Preparatory step for getting rid of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-5-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Introduce b53_adjust_5325_mii()Florian Fainelli
Takes care of doing the 5325 switch series specific MII programming and is called from b53_adjust_link() to allow the future removal of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-4-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Introduce b53_adjust_531x5_rgmii()Florian Fainelli
Takes care of doing the 531x5 switch series specific RGMII programming and is called from b53_adjust_link() to allow the future removal of b53_adjust_link(). Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-3-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-24net: dsa: b53: Stop exporting b53_phylink_* routinesFlorian Fainelli
They are not used outside of the b53_common.c file, no need to be exported. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20240423183339.1368511-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08net: dsa: b53: unexport and move b53_eee_enable_set()Vladimir Oltean
After commit f86ad77faf24 ("net: dsa: bcm_sf2: Utilize b53_{enable, disable}_port"), bcm_sf2.c no longer calls b53_eee_enable_set(), and all its callers are in b53_common.c. We also need to move it, because it is called within b53_common.c before its definition, and we want to avoid forward declarations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240206112527.4132299-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: dsa: b53: remove eee_enabled/eee_active in b53_get_mac_eee()Russell King (Oracle)
b53_get_mac_eee() sets both eee_enabled and eee_active, and then returns zero. dsa_slave_get_eee(), which calls this function, will then continue to call phylink_ethtool_get_eee(), which will return -EOPNOTSUPP if there is no PHY present, otherwise calling phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Thus, when there is no PHY, dsa_slave_get_eee() will fail with -EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to userspace. When there is a PHY, eee_enabled and eee_active will be overwritten by phylib, making the setting of these members in b53_get_mac_eee() entirely unnecessary. Remove this code, thus simplifying b53_get_mac_eee(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1rWbNI-002cCz-4x@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24net: dsa: Use conduit and user termsFlorian Fainelli
Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18net: dsa: remove legacy_pre_march2020 from driversRussell King (Oracle)
Since DSA no longer marks anything as phylink-legacy, there is now no need for DSA drivers to set this member to false. Remove all instances of this. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-27net: dsa: b53: mdio: add support for BCM53134Paul Geurts
Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver. BCM53134 is very similar to the BCM58XX series. Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-22net: dsa: b53: add BCM63268 RGMII configurationÁlvaro Fernández Rojas
BCM63268 requires special RGMII configuration to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: b53: mmap: allow passing a chip IDÁlvaro Fernández Rojas
BCM6318 and BCM63268 SoCs require a special handling for their RGMIIs, so we should be able to identify them as a special BCM63xx switch. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21net: dsa: b53: add support for BCM63xx RGMIIsÁlvaro Fernández Rojas
BCM63xx RGMII ports require additional configuration in order to work. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230319220805.124024-1-noltari@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-31net: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-04Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
2022-05-02net: dsa: don't use bitmap_weight() in b53_arl_read()Yury Norov
Don't call bitmap_weight() if the following code can get by without it. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2022-05-01net: dsa: b53: convert to phylink_pcsRussell King (Oracle)
Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-17net: dsa: pass extack to dsa_switch_ops :: port_mirror_add()Vladimir Oltean
Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-27net: dsa: pass extack to .port_bridge_join driver methodsVladimir Oltean
As FDB isolation cannot be enforced between VLAN-aware bridges in lack of hardware assistance like extra FID bits, it seems plausible that many DSA switches cannot do it. Therefore, they need to reject configurations with multiple VLAN-aware bridges from the two code paths that can transition towards that state: - joining a VLAN-aware bridge - toggling VLAN awareness on an existing bridge The .port_vlan_filtering method already propagates the netlink extack to the driver, let's propagate it from .port_bridge_join too, to make sure that the driver can use the same function for both. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-27net: dsa: request drivers to perform FDB isolationVladimir Oltean
For DSA, to encourage drivers to perform FDB isolation simply means to track which bridge does each FDB and MDB entry belong to. It then becomes the driver responsibility to use something that makes the FDB entry from one bridge not match the FDB lookup of ports from other bridges. The top-level functions where the bridge is determined are: - dsa_port_fdb_{add,del} - dsa_port_host_fdb_{add,del} - dsa_port_mdb_{add,del} - dsa_port_host_mdb_{add,del} aka the pre-crosschip-notifier functions. Changing the API to pass a reference to a bridge is not superfluous, and looking at the passed bridge argument is not the same as having the driver look at dsa_to_port(ds, port)->bridge from the ->port_fdb_add() method. DSA installs FDB and MDB entries on shared (CPU and DSA) ports as well, and those do not have any dp->bridge information to retrieve, because they are not in any bridge - they are merely the pipes that serve the user ports that are in one or multiple bridges. The struct dsa_bridge associated with each FDB/MDB entry is encapsulated in a larger "struct dsa_db" database. Although only databases associated to bridges are notified for now, this API will be the starting point for implementing IFF_UNICAST_FLT in DSA. There, the idea is to install FDB entries on the CPU port which belong to the corresponding user port's port database. These are supposed to match only when the port is standalone. It is better to introduce the API in its expected final form than to introduce it for bridges first, then to have to change drivers which may have made one or more assumptions. Drivers can use the provided bridge.num, but they can also use a different numbering scheme that is more convenient. DSA must perform refcounting on the CPU and DSA ports by also taking into account the bridge number. So if two bridges request the same local address, DSA must notify the driver twice, once for each bridge. In fact, if the driver supports FDB isolation, DSA must perform refcounting per bridge, but if the driver doesn't, DSA must refcount host addresses across all bridges, otherwise it would be telling the driver to delete an FDB entry for a bridge and the driver would delete it for all bridges. So introduce a bool fdb_isolation in drivers which would make all bridge databases passed to the cross-chip notifier have the same number (0). This makes dsa_mac_addr_find() -> dsa_db_equal() say that all bridge databases are the same database - which is essentially the legacy behavior. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: mark as non-legacyRussell King (Oracle)
The B53 driver does not make use of the speed, duplex, pause or advertisement in its phylink_mac_config() implementation, so it can be marked as a non-legacy driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: switch to using phylink_generic_validate()Russell King (Oracle)
Switch the Broadcom b53 driver to using the phylink_generic_validate() implementation by removing its own .phylink_validate method and associated code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: drop use of phylink_helper_basex_speed()Russell King (Oracle)
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: populate supported_interfaces and mac_capabilitiesRussell King (Oracle)
Populate the supported interfaces and MAC capabilities for the Broadcom B53 DSA switches in preparation to using these for the generic validation functionality. The interface modes are derived from: - b53_serdes_phylink_validate() - SRAB mux configuration Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-22net: dsa: b53: clean up if() condition to be more readableRussell King (Oracle)
I've stared at this if() statement for a while trying to work out if it really does correspond with the comment above, and it does seem to. However, let's make it more readable and phrase it in the same way as the comment. Also add a FIXME into the comment - we appear to deny Gigabit modes for 802.3z interface modes, but 802.3z interface modes only operate at gigabit and above. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_joinVladimir Oltean
This is a preparation patch for the removal of the DSA switch methods ->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload(). The plan is for the switch to report whether it offloads TX forwarding directly as a response to the ->port_bridge_join() method. This change deals with the noisy portion of converting all existing function prototypes to take this new boolean pointer argument. The bool is placed in the cross-chip notifier structure for bridge join, and a reference to it is provided to drivers. In the next change, DSA will then actually look at this value instead of calling ->port_bridge_tx_fwd_offload(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: dsa: keep the bridge_dev and bridge_num as part of the same structureVladimir Oltean
The main desire behind this is to provide coherent bridge information to the fast path without locking. For example, right now we set dp->bridge_dev and dp->bridge_num from separate code paths, it is theoretically possible for a packet transmission to read these two port properties consecutively and find a bridge number which does not correspond with the bridge device. Another desire is to start passing more complex bridge information to dsa_switch_ops functions. For example, with FDB isolation, it is expected that drivers will need to be passed the bridge which requested an FDB/MDB entry to be offloaded, and along with that bridge_dev, the associated bridge_num should be passed too, in case the driver might want to implement an isolation scheme based on that number. We already pass the {bridge_dev, bridge_num} pair to the TX forwarding offload switch API, however we'd like to remove that and squash it into the basic bridge join/leave API. So that means we need to pass this pair to the bridge join/leave API. During dsa_port_bridge_leave, first we unset dp->bridge_dev, then we call the driver's .port_bridge_leave with what used to be our dp->bridge_dev, but provided as an argument. When bridge_dev and bridge_num get folded into a single structure, we need to preserve this behavior in dsa_port_bridge_leave: we need a copy of what used to be in dp->bridge. Switch drivers check bridge membership by comparing dp->bridge_dev with the provided bridge_dev, but now, if we provide the struct dsa_bridge as a pointer, they cannot keep comparing dp->bridge to the provided pointer, since this only points to an on-stack copy. To make this obvious and prevent driver writers from forgetting and doing stupid things, in this new API, the struct dsa_bridge is provided as a full structure (not very large, contains an int and a pointer) instead of a pointer. An explicit comparison function needs to be used to determine bridge membership: dsa_port_offloads_bridge(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: dsa: hide dp->bridge_dev and dp->bridge_num in drivers behind helpersVladimir Oltean
The location of the bridge device pointer and number is going to change. It is not going to be kept individually per port, but in a common structure allocated dynamically and which will have lockdep validation. Use the helpers to access these elements so that we have a migration path to the new organization. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25net: dsa: b53: serialize access to the ARL tableVladimir Oltean
The b53 driver performs non-atomic transactions to the ARL table when adding, deleting and reading FDB and MDB entries. Traditionally these were all serialized by the rtnl_lock(), but now it is possible that DSA calls ->port_fdb_add and ->port_fdb_del without holding that lock. So the driver must have its own serialization logic. Add a mutex and hold it from all entry points (->port_fdb_{add,del,dump}, ->port_mdb_{add,del}). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25Revert "Merge branch 'dsa-rtnl'"David S. Miller
This reverts commit 965e6b262f48257dbdb51b565ecfd84877a0ab5f, reversing changes made to 4d98bb0d7ec2d0b417df6207b0bafe1868bad9f8.
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: dsa: b53: serialize access to the ARL tableVladimir Oltean
The b53 driver performs non-atomic transactions to the ARL table when adding, deleting and reading FDB and MDB entries. Traditionally these were all serialized by the rtnl_lock(), but now it is possible that DSA calls ->port_fdb_add and ->port_fdb_del without holding that lock. So the driver must have its own serialization logic. Add a mutex and hold it from all entry points (->port_fdb_{add,del,dump}, ->port_mdb_{add,del}). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net: dsa: b53: Drop unused "cpu_port" fieldRafał Miłecki
It's set but never used anymore. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-16net: dsa: b53: Improve flow control setup on BCM5301xRafał Miłecki
According to the Broadcom's reference driver flow control needs to be enabled for any CPU switch port (5, 7 or 8 - depending on which one is used). Current code makes it work only for the port 5. Use dsa_is_cpu_port() which solved that problem. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-16net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP portRafał Miłecki
On BCM5301x port 8 requires a fixed link when used. Years ago when b53 was an OpenWrt downstream driver (with configuration based on sometimes bugged NVRAM) there was a need for a fixup. In case of forcing fixed link for (incorrectly specified) port 5 the code had to actually setup port 8 link. For upstream b53 driver with setup based on DT there is no need for that workaround. In DT we have and require correct ports setup. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-16net: dsa: b53: Include all ports in "enabled_ports"Rafał Miłecki
Make "enabled_ports" bitfield contain all available switch ports including a CPU port. This way there is no need for fixup during initialization. For BCM53010, BCM53018 and BCM53019 include also other available ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-05net: dsa: b53: Fix IMP port setup on BCM5301xRafał Miłecki
Broadcom's b53 switches have one IMP (Inband Management Port) that needs to be programmed using its own designed register. IMP port may be different than CPU port - especially on devices with multiple CPU ports. For that reason it's required to explicitly note IMP port index and check for it when choosing a register to use. This commit fixes BCM5301x support. Those switches use CPU port 5 while their IMP port is 8. Before this patch b53 was trying to program port 5 with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5). It may be possible to also replace "cpu_port" usages with dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02net: dsa: b53: Set correct number of ports in the DSA structRafał Miłecki
Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g. b53_disable_port() during dsa_register_switch()) for invalid (non-existent) ports. That made b53 modify unrelated registers and is one of reasons for a broken BCM5301x support. This problem exists for years but DSA_MAX_PORTS usage has changed few times. It seems the most accurate to reference commit dropping dsa_switch_alloc() in the Fixes tag. Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02net: dsa: b53: Fix calculating number of switch portsRafał Miłecki
It isn't true that CPU port is always the last one. Switches BCM5301x have 9 ports (port 6 being inactive) and they use port 5 as CPU by default (depending on design some other may be CPU ports too). A more reliable way of determining number of ports is to check for the last set bit in the "enabled_ports" bitfield. This fixes b53 internal state, it will allow providing accurate info to the DSA and is required to fix BCM5301x support. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: dsa: don't disable multicast flooding to the CPU even without an IGMP ↵Vladimir Oltean
querier Commit 08cc83cc7fd8 ("net: dsa: add support for BRIDGE_MROUTER attribute") added an option for users to turn off multicast flooding towards the CPU if they turn off the IGMP querier on a bridge which already has enslaved ports (echo 0 > /sys/class/net/br0/bridge/multicast_router). And commit a8b659e7ff75 ("net: dsa: act as passthrough for bridge port flags") simply papered over that issue, because it moved the decision to flood the CPU with multicast (or not) from the DSA core down to individual drivers, instead of taking a more radical position then. The truth is that disabling multicast flooding to the CPU is simply something we are not prepared to do now, if at all. Some reasons: - ICMP6 neighbor solicitation messages are unregistered multicast packets as far as the bridge is concerned. So if we stop flooding multicast, the outside world cannot ping the bridge device's IPv6 link-local address. - There might be foreign interfaces bridged with our DSA switch ports (sending a packet towards the host does not necessarily equal termination, but maybe software forwarding). So if there is no one interested in that multicast traffic in the local network stack, that doesn't mean nobody is. - PTP over L4 (IPv4, IPv6) is multicast, but is unregistered as far as the bridge is concerned. This should reach the CPU port. - The switch driver might not do FDB partitioning. And since we don't even bother to do more fine-grained flood disabling (such as "disable flooding _from_port_N_ towards the CPU port" as opposed to "disable flooding _from_any_port_ towards the CPU port"), this breaks standalone ports, or even multiple bridges where one has an IGMP querier and one doesn't. Reverting the logic makes all of the above work. Fixes: a8b659e7ff75 ("net: dsa: act as passthrough for bridge port flags") Fixes: 08cc83cc7fd8 ("net: dsa: add support for BRIDGE_MROUTER attribute") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: dsa: b53: Create default VLAN entry explicitlyFlorian Fainelli
In case CONFIG_VLAN_8021Q is not set, there will be no call down to the b53 driver to ensure that the default PVID VLAN entry will be configured with the appropriate untagged attribute towards the CPU port. We were implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, instead make it explicit. Reported-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-09net: dsa: b53: Do not force CPU to be always taggedFlorian Fainelli
Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") forced the CPU port to be always tagged in any VLAN membership. This was necessary back then because we did not support Broadcom tags for all configurations so the only way to differentiate tagged and untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU port into being always tagged. With most configurations enabling Broadcom tags, especially after 8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x families") we do not need to apply this unconditional force tagging of the CPU port in all VLANs. A helper function is introduced to faciliate the encapsulation of the specific condition requiring the CPU port to be tagged in all VLANs and the dsa_switch_ops::untag_bridge_pvid boolean is moved to when dsa_switch_ops::setup is called when we have already determined the tagging protocol we will be using. Reported-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17net: dsa: b53: support legacy tagsÁlvaro Fernández Rojas
These tags are used on BCM5325, BCM5365 and BCM63xx switches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-14 07:32:11 +0000