summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/mv88e6xxx.c
AgeCommit message (Collapse)Author
2015-06-23dsa: mv88x6xxx: Zero statistics countersAndrew Lunn
Zero the statistics counters when setting up the global registers. Otherwise the counters will remain from the last boot if the power has not been removed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for scratch registersAndrew Lunn
Allow the contents of the scratch registers to be shown in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for device mapAndrew Lunn
The device map is used to route packets between cascaded switches. Add dumping a switches device map via debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Add debugfs interface for statisticsAndrew Lunn
Allow the contents of the statistics counters to be shown in debugfs. This is particularly useful for the cpu and dsa ports, which cannot be seen using ethtools -S. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88x6xxx: Refactor getting a single statisticAndrew Lunn
Move the code to retrieve a statistics counter into a function of its own, so it can later be reused. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88e6xxx: Add debugfs interface for ATUAndrew Lunn
Dump the Address Translation Unit via a file in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23dsa: mv88e6xxx: Add debugfs interface for registersAndrew Lunn
Allow the contents of the registers to be shown in debugfs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07net: dsa: mv88e6xxx: Fix deadlock by double lockAndrew Lunn
ethtool -S on a DSA interface can deadlock for some switches because the same lock is taken twice. Use the register read function which expects the lock to be already held. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 31888234b736 ("net: dsa: mv88e6xxx: Replace stats mutex with SMI mutex") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: mv88e6xxx: Fix false positive lockdep splatAndrew Lunn
DSA can have nested MDIO busses, where the Ethernet MDIO bus is used to access an MDIO bus within the switch which has the PHYs connected to it. This nesting causes lockdep to give false positives. Use mutex_lock_nested() to avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: mv88e6xxx: Replace stats mutex with SMI mutexAndrew Lunn
The SMI bus is the bottleneck in all switch operations, not the granularity of locks. Replace the stats mutex by the SMI mutex to make the locking concept simpler. The REG_READ/REG_WRITE macros cannot be used while holding the SMI mutex, since they try to acquire it. Replace with calls to the appropriate function which does not try to get the mutex. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: mv88e6xxx: Replace PHY mutex by SMI mutexAndrew Lunn
The SMI bus is the bottleneck in all switch operations, not the granularity of locks. Replace the PHY mutex by the SMI mutex to make the locking concept simpler. The REG_READ/REG_WRITE macros cannot be used while holding the SMI mutex, since they try to acquire it. Replace with calls to the appropriate function which does not try to get the mutex. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: Centralize setting up portsAndrew Lunn
Now that setting up a port is identical for all switches, centralisers the code looping over all the ports to set them up. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09net: dsa: Centralise global and port setup code into mv88e6xxx.Andrew Lunn
The port setup code in the individual drivers is identical for 6123, 6171, and 6352, and very similar in 6131. Move it all into mv88e6xxx, using the chip families to differentiate on features. Similarly, the global setup is also very similar. Move the majority into mv8e6xxx. The chips themselves fall into families. Add helpers which uses the device IDs to determine if a device is a member of a family or not. Add some additional device IDs to the existing list, to make these helper functions more complete. However these IDs are not yet added to the probe functions. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04net: dsa: mv88e6xxx: unregister mv88e6352 driverVivien Didelot
Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20net: dsa: mv88e6xxx: use PORT_DEFAULT_VLANVivien Didelot
Minor, use the explicit PORT_DEFAULT_VLAN define instead of 0x07. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-20net: dsa: mv88e6xxx: fix setup of port control 1Vivien Didelot
mv88e6xxx_setup_port_common was writing to PORT_DEFAULT_VLAN (port offset 0x07) instead of PORT_CONTROL_1 (port offset 0x05). Fixes: cca8b1337541 ("net: dsa: Use mnemonics rather than register numbers") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state()Geert Uytterhoeven
drivers/net/dsa/mv88e6xxx.c: In function ‘mv88e6xxx_set_port_state’: drivers/net/dsa/mv88e6xxx.c:905: warning: ‘ret’ may be used uninitialized in this function If oldstate == state, mv88e6xxx_set_port_state() will return an uninitialized value. Pre-initialize ret to zero to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16dsa: mv88e6xxx: Drop duplicate declaration of 'ret' variableGuenter Roeck
A duplicate declaration of 'ret' can result in hiding an error code. Drop it. Fixes: 17ee3e04ddbf ("net: dsa: Provide additional RMON statistics") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16dsa: mv88e6xxx: Fix error handling in mv88e6xxx_set_port_stateGuenter Roeck
Return correct error code if _mv88e6xxx_reg_read returns an error. Fixes: facd95b2e0ec0 ("net: dsa: mv88e6xxx: Add Hardware bridging support") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: mv88e6xxx: Fix stats counters for 6352 familyAndrew Lunn
The statistic counters for the mv88e6172 never worked. This device is a member of the 6352 family of chips, which has a slightly different layout of the register used for capturing statistics. Add support for detecting this family and poking the port in the right place in the register. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Use mnemonics rather than register numbersAndrew Lunn
Rather than refer to registers by number, define mnemonics. Also define mnemonics for the commonly used bits within the registers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Consolidate getting the statisticsAndrew Lunn
Reading the statistics from the hardware is the same for all chips. What differs is the number of available statistics. Have just one copy of the code in the shared mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: mv88e6xxx: Add missing mutex's in EEE operations.Andrew Lunn
The phy_mutex should be held while reading and writing to the phy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Consolidate phy read and write functionsAndrew Lunn
Move the common code for reading and writing phy registers into the shared mv88e6xxx. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Move phy page access functions into shared codeAndrew Lunn
These functions could in future be used by other drivers. Move them into the shared area. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Centralize Marvell switch resetAndrew Lunn
Marvell switches are all reset in nearly the same way. The only difference is if the PPU should be enabled or not. Move this code into the shared mv88x6xxx.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: Centralise getting switch idAndrew Lunn
Get the switch id and save it away in the private mv88x6xxx structure in a centralised piece of code, rather than each driver doing it itself. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Add support for fdb_add, fdb_del, and fdb_getnextGuenter Roeck
No vlan support at this time. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Add Hardware bridging supportGuenter Roeck
Bridge support is similar for all chips supported by the mv88e6xxx code, so add the code there. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Split mv88e6xxx_reg_read and mv88e6xxx_reg_writeGuenter Roeck
Split mv88e6xxx_reg_read and mv88e6xxx_reg_write into two functions each, one to acquire smi_mutex and one to get struct mii_bus *bus from struct dsa_switch *ds and to call the actual read/write function. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Disable Message Port bit for CPU portGuenter Roeck
Datasheet says that the Message Port bit should not be set for the CPU port. Having it set causes DSA tagged packets to be sent to the CPU port roughly every 30 seconds. Those packets are the same as real packets forwarded between switch ports if the switch is configured for switching between multiple ports. The packets are then bridged by the software bridge, resulting in duplicated packets on the network. Reported-by: Andrew Lunn <andrew@lunn.ch> Cc: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Provide function for common port initializationGuenter Roeck
Provide mv88e6xxx_setup_port_common() for common port initialization. Currently only write Port 1 Control and VLAN configuration since this will be needed for hardware bridging. More can be added later if desired/needed. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: dsa: mv88e6xxx: Factor out common initialization codeGuenter Roeck
Code used and needed in mv886xxx.c should be initialized there as well, so factor it out from the individual initialization files. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07net: dsa: mv88e6xxx: Add EEE supportGuenter Roeck
EEE configuration is similar for the various MV88E6xxx chips. Add generic support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-19net: dsa: mv88e6352: Refactor shareable codeAndrew Lunn
The mv88e6352 allows access to the port phys via an internal mdio bus which is accessed using registers in the GLOBAL 2 range. The mv88e6171 and probably other devices use the same mechanism. Move this code into the shared mv88e6xxx.c library. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net: dsa/mv88e6xxx: add reg read and write debugVivien Didelot
This commit adds debug messages for the generic mv88e6xxx read and write routines. The output is similar to this: mdio-gpio mdio-gpio.0: <- addr: 0x1b reg: 0x05 val: 0x4000 mdio-gpio mdio-gpio.0: -> addr: 0x1b reg: 0x07 val: 0x3113 mdio-gpio mdio-gpio.0: -> addr: 0x1b reg: 0x08 val: 0x0330 mdio-gpio mdio-gpio.0: -> addr: 0x1b reg: 0x09 val: 0x0000 This is convenient to dynamically debug operations through debugfs with: echo file mv88e6xxx.c +p > <debugfs>/dynamic_debug/control Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16net: dsa: Centralise code for reading the temperature sensorAndrew Lunn
The method to read the temperature used in the mve6123_61_65 driver can also be used for other chips. Move the code into the shared code base of mv88e6xxx.c. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Provide additional RMON statisticsGuenter Roeck
Display sw_in_discards, sw_in_filtered, and sw_out_filtered for chips supported by mv88e6123_61_65 and mv88e6352 drivers. The variables are provided in port registers, not the normal status registers. Mark by adding 0x100 to the register offset and add special handling code to mv88e6xxx_get_ethtool_stats. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa/mv88e6123_61_65: Add support for reading switch registersGuenter Roeck
The infrastructure can now report switch registers to ethtool. Add support for it to the mv88e6123_61_65 driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30net: dsa: Add support for Marvell 88E6352Guenter Roeck
Marvell 88E6352 is mostly compatible to MV88E6123/61/65, but requires indirect phy access. Also, its configuration registers are a bit different. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17dsa: Fix conversion from host device to mii busGuenter Roeck
Commit b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") replaces mii_bus with a generic host_dev, and introduces dsa_host_dev_to_mii_bus() to support conversion from host_dev to mii_bus. However, in some cases it uses to_mii_bus to perform that conversion. Since host_dev is not the phy bus device but typically a platform device, this fails and results in a crash with the affected drivers. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81781d35>] __mutex_lock_slowpath+0x75/0x100 PGD 406783067 PUD 406784067 PMD 0 Oops: 0002 [#1] SMP ... Call Trace: [<ffffffff810a538b>] ? pick_next_task_fair+0x61b/0x880 [<ffffffff81781de3>] mutex_lock+0x23/0x37 [<ffffffff81533244>] mdiobus_read+0x34/0x60 [<ffffffff8153b95a>] __mv88e6xxx_reg_read+0x8a/0xa0 [<ffffffff8153b9bc>] mv88e6xxx_reg_read+0x4c/0xa0 Fixes: b4d2394d01bc ("dsa: Replace mii_bus with a generic host device") Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15dsa: Replace mii_bus with a generic host deviceAlexander Duyck
This change makes it so that instead of passing and storing a mii_bus we instead pass and store a host_dev. From there we can test to determine the exact type of device, and can verify it is the correct device for our switch. So for example it would be possible to pass a device pointer from a pci_dev and instead of checking for a PHY ID we could check for a vendor and/or device ID. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: DSA: Marvell mv88e6171 switch driverAndrew Lunn
This is the Marvell driver with some cleanups by Claudio Leite and myself. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Claudio Leite <leitec@staticky.com> Signed-off-by: Claudio Leite <leitec@staticky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: dsa: update DSA drivers to use ds_to_privFlorian Fainelli
Use the helper function to retrieve the driver private context instead of using (void *)(ds + 1). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert spaces to tabs where appropriateBarry Grussling
Fix DSA whitespace issues reported by checkpatch.pl Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert printk calls to netdev_info callsBarry Grussling
Convert DSA printk calls to netdev_info calls as recommended by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert repeated msleep calls to timeoutsBarry Grussling
Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10DSA: Convert DSA comments to network-style commentsBarry Grussling
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24drivers/net: dsa/mv88e6xxx.c files need linux/module.hPaul Gortmaker
An implicit instance of module.h leaked back into existence and was masking the fact that these drivers weren't calling out the include for itself. Fix the drivers before we remove the implicit include path via net/netprio_cgroup.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-03-31 04:07:44 +0000