summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amazon
AgeCommit message (Collapse)Author
2023-03-27net: ena: Advertise TX push supportShay Agroskin
LLQ is auto enabled by the device and disabling it isn't supported on new ENA generations while on old ones causes sub-optimal performance. This patch adds advertisement of push-mode when LLQ mode is used, but rejects an attempt to modify it. Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: ena: Add support to changing tx_push_buf_lenShay Agroskin
The ENA driver allows for two distinct values for the number of bytes of the packet's payload that can be written directly to the device. For a value of 224 the driver turns on Large LLQ Header mode in which the first 224 of the packet's payload are written to the LLQ. Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: ena: Recalculate TX state variables every device resetShay Agroskin
With the ability to modify LLQ entry size, the size of packet's payload that can be written directly to the device changes. This patch makes the driver recalculate this information every device negotiation (also called device reset). Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: ena: Add an option to configure large LLQ headersDavid Arinzon
Allow configuring the device with large LLQ headers. The Low Latency Queue (LLQ) allows the driver to write the first N bytes of the packet, along with the rest of the TX descriptors directly into device (N can be either 96 or 224 for large LLQ headers configuration). Having L4 TCP/UDP headers contained in the first 96 bytes of the packet is required to get maximum performance from the device. Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: ena: Make few cosmetic preparations to support large LLQShay Agroskin
Move ena_calc_io_queue_size() implementation closer to the file's beginning so that it can be later called from ena_device_init() function without adding a function declaration. Also add an empty line at some spots to separate logical blocks in funcitons. Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-10net: ena: take into account xdp_features setting tx/rx queuesLorenzo Bianconi
ena nic allows xdp just if enough hw queues are available for XDP. Take into account queues configuration setting xdp_features. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Reviewed-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-30net: ena: Update NUMA TPH hint register upon NUMA node updateDavid Arinzon
The device supports a PCIe optimization hint, which indicates on which NUMA the queue is currently processed. This hint is utilized by PCIe in order to reduce its access time by accessing the correct NUMA resources and maintaining cache coherence. The driver calls the register update for the hint (called TPH - TLP Processing Hint) during the NAPI loop. Though the update is expected upon a NUMA change (when a queue is moved from one NUMA to the other), the current logic performs a register update when the queue is moved to a different CPU, but the CPU is not necessarily in a different NUMA. The changes include: 1. Performing the TPH update only when the queue has switched a NUMA node. 2. Moving the TPH update call to be triggered only when NAPI was scheduled from interrupt context, as opposed to a busy-polling loop. This is due to the fact that during busy-polling, the frequency of CPU switches for a particular queue is significantly higher, thus, the likelihood to switch NUMA is much higher. Therefore, providing the frequent updates to the device upon a NUMA update are unlikely to be beneficial. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Set default value for RX interrupt moderationDavid Arinzon
RX ring can be NULL in XDP use cases where only TX queues are configured. In this scenario, the RX interrupt moderation value sent to the device remains in its default value of 0. In this change, setting the default value of the RX interrupt moderation to be the same as of the TX. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Fix rx_copybreak value updateDavid Arinzon
Make the upper bound on rx_copybreak tighter, by making sure it is smaller than the minimum of mtu and ENA_PAGE_SIZE. With the current upper bound of mtu, rx_copybreak can be larger than a page. Such large rx_copybreak will not bring any performance benefit to the user and therefore makes no sense. In addition, the value update was only reflected in the adapter structure, but not applied for each ring, causing it to not take effect. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Osama Abboud <osamaabb@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Use bitmask to indicate packet redirectionDavid Arinzon
Redirecting packets with XDP Redirect is done in two phases: 1. A packet is passed by the driver to the kernel using xdp_do_redirect(). 2. After finishing polling for new packets the driver lets the kernel know that it can now process the redirected packet using xdp_do_flush_map(). The packets' redirection is handled in the napi context of the queue that called xdp_do_redirect() To avoid calling xdp_do_flush_map() each time the driver first checks whether any packets were redirected, using xdp_flags |= xdp_verdict; and if (xdp_flags & XDP_REDIRECT) xdp_do_flush_map() essentially treating XDP instructions as a bitmask, which isn't the case: enum xdp_action { XDP_ABORTED = 0, XDP_DROP, XDP_PASS, XDP_TX, XDP_REDIRECT, }; Given the current possible values of xdp_action, the current design doesn't have a bug (since XDP_REDIRECT = 100b), but it is still flawed. This patch makes the driver use a bitmask instead, to avoid future issues. Fixes: a318c70ad152 ("net: ena: introduce XDP redirect implementation") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Account for the number of processed bytes in XDPDavid Arinzon
The size of packets that were forwarded or dropped by XDP wasn't added to the total processed bytes statistic. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Don't register memory info on XDP exchangeDavid Arinzon
Since the queues aren't destroyed when we only exchange XDP programs, there's no need to re-register them again. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Fix toeplitz initial hash valueDavid Arinzon
On driver initialization, RSS hash initial value is set to zero, instead of the default value. This happens because we pass NULL as the RSS key parameter, which caused us to never initialize the RSS hash value. This patch fixes it by making sure the initial value is set, no matter what the value of the RSS key is. Fixes: 91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL") Signed-off-by: Nati Koler <nkoler@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-15net: ena: Fix error handling in ena_init()Yuan Can
The ena_init() won't destroy workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-30eth: remove remaining copies of the NAPI_POLL_WEIGHT defineJakub Kicinski
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. This patch covers three more drivers which I missed in commit 5f012b40ef63 ("eth: remove copies of the NAPI_POLL_WEIGHT define"). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-31net: ena: Do not waste napi skb cacheHyeonggon Yoo
By profiling, discovered that ena device driver allocates skb by build_skb() and frees by napi_skb_cache_put(). Because the driver does not use napi skb cache in allocation path, napi skb cache is periodically filled and flushed. This is waste of napi skb cache. As ena_alloc_skb() is called only in napi, Use napi_build_skb() and napi_alloc_skb() when allocating skb. This patch was tested on aws a1.metal instance. [ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of netdev_alloc_skb_ip_align() to keep things consistent. ] Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internal Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Extract recurring driver reset code into a functionArthur Kiyanovski
Create an inline function for resetting the driver to reduce code duplication. Signed-off-by: Nati Koler <nkoler@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Change the name of bad_csum variableArthur Kiyanovski
Changed bad_csum to csum_bad to align with csum_unchecked & csum_good Signed-off-by: Nati Koler <nkoler@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Add debug prints for invalid req_id resetsArthur Kiyanovski
Add qid and req_id to error prints when ENA_REGS_RESET_INV_TX_REQ_ID reset occurs. Switch from %hu to %u, since u16 should be printed with %u, as explained in [1]. [1] - https://www.kernel.org/doc/html/latest/core-api/printk-formats.html Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Remove ena_calc_queue_size_ctx structArthur Kiyanovski
This struct was used to pass data from callee function to its caller. Its usage can be avoided. Removing it results in less code without any damage to code readability. Also it allows to consolidate ring size calculation into a single function (ena_calc_io_queue_size()). Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Move reset completion print to the reset functionArthur Kiyanovski
The print that indicates that device reset has finished is currently called from ena_restore_device(). Move it to ena_fw_reset_device() as it is the more natural location for it. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Remove redundant return code checkArthur Kiyanovski
The ena_com_indirect_table_fill_entry() function only returns -EINVAL or 0, no need to check for -EOPNOTSUPP. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Change ENI stats support check to use capabilities fieldArthur Kiyanovski
Use the capabilities field to query the device for ENI stats support. This replaces the previous method that tried to get the ENI stats during ena_probe() and used the success or failure as an indication for support by the device. Remove eni_stats_supported field from struct ena_adapter. This field was used for the previous method of queriying for ENI stats support. Change the severity level of the print in case of ena_com_get_eni_stats() failure from info to error. With the previous method of querying form ENI stats support, failure to get ENI stats was normal for devices that don't support it. With the use of the capabilities field such a failure is unexpected, as it is called only if the device reported that it supports ENI stats. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Add capabilities field with support for ENI stats capabilityArthur Kiyanovski
This bitmask field indicates what capabilities are supported by the device. The capabilities field differs from the 'supported_features' field which indicates what sub-commands for the set/get feature commands are supported. The sub-commands are specified in the 'feature_id' field of the 'ena_admin_set_feat_cmd' struct in the following way: struct ena_admin_set_feat_cmd cmd; cmd.aq_common_descriptor.opcode = ENA_ADMIN_SET_FEATURE; cmd.feat_common.feature_ The 'capabilities' field, on the other hand, specifies different capabilities of the device. For example, whether the device supports querying of ENI stats. Also add an enumerator which contains all the capabilities. The first added capability macro is for ENI stats feature. Capabilities are queried along with the other device attributes (in ena_com_get_dev_attr_feat()) during device initialization and are stored in the ena_com_dev struct. They can be later queried using the ena_com_get_cap() helper function. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07net: ena: Change return value of ena_calc_io_queue_size() to voidArthur Kiyanovski
ena_calc_io_queue_size() always returns 0, therefore make it a void function and update the calling function to stop checking the return value. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02net: ena: Fix error handling when calculating max IO queues numberArthur Kiyanovski
The role of ena_calc_max_io_queue_num() is to return the number of queues supported by the device, which means the return value should be >=0. The function that calls ena_calc_max_io_queue_num(), checks the return value. If it is 0, it means the device reported it supports 0 IO queues. This case is considered an error and is handled by the calling function accordingly. However the current implementation of ena_calc_max_io_queue_num() is wrong, since when it detects the device supports 0 IO queues, it returns -EFAULT. In such a case the calling function doesn't detect the error, and therefore doesn't handle it. This commit changes ena_calc_max_io_queue_num() to return 0 in case the device reported it supports 0 queues, allowing the calling function to properly handle the error case. Fixes: 736ce3f414cc ("net: ena: make ethtool -l show correct max number of queues") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: ena: Fix wrong rx request id by resetting deviceArthur Kiyanovski
A wrong request id received from the device is a sign that something is wrong with it, therefore trigger a device reset. Also add some debug info to the "Page is NULL" print to make it easier to debug. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02net: ena: Fix undefined state when tx request id is out of boundsArthur Kiyanovski
ena_com_tx_comp_req_id_get() checks the req_id of a received completion, and if it is out of bounds returns -EINVAL. This is a sign that something is wrong with the device and it needs to be reset. The current code does not reset the device in this case, which leaves the driver in an undefined state, where this completion is not properly handled. This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq() and ena_clean_xdp_irq() which resets the device to fix the issue. This commit also removes unnecessary request id checks from validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded because it was already performed in ena_com_tx_comp_req_id_get(), which is called right before these functions. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Add includes masked by netdevice.h including uapi/bpf.hJakub Kicinski
Add missing includes unmasked by the subsequent change. Mostly network drivers missing an include for XDP_PACKET_HEADROOM. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230012742.770642-2-kuba@kernel.org
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24ena: Remove rcu_read_lock() around XDP program invocationToke Høiland-Jørgensen
The ena driver has rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Saeed Bishara <saeedb@amazon.com> Cc: Guy Tzalik <gtzalik@amazon.com> Link: https://lore.kernel.org/bpf/20210624160609.292325-8-toke@redhat.com
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-09net: ena: make symbol 'ena_alloc_map_page' staticWei Yongjun
The sparse tool complains as follows: drivers/net/ethernet/amazon/ena/ena_netdev.c:978:13: warning: symbol 'ena_alloc_map_page' was not declared. Should it be static? This symbol is not used outside of ena_netdev.c, so marks it static. Fixes: 947c54c395cb ("net: ena: Use dev_alloc() in RX buffer allocation") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: fix DMA mapping function issues in XDPShay Agroskin
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for transmission. The mapping procedure makes the transmitted packet accessible by the device. When using LLQ, this requires copying the packet's header to push header (which would be passed to LLQ) and creating DMA mapping for the payload (if the packet doesn't fit the maximum push length). When not using LLQ, we map the whole packet with DMA. The following bugs are fixed in the code: 1. Add support for non-LLQ machines: The ena_xdp_tx_map_frame() function assumed that LLQ is supported, and never mapped the whole packet using DMA. On some instances, which don't support LLQ, this causes loss of traffic. 2. Wrong DMA buffer length passed to device: When using LLQ, the first 'tx_max_header_size' bytes of the packet would be copied to push header. The rest of the packet would be copied to a DMA'd buffer. 3. Freeing the XDP buffer twice in case of a mapping error: In case a buffer DMA mapping fails, the function uses xdp_return_frame_rx_napi() to free the RX buffer and returns from the function with an error. XDP frames that fail to xmit get freed by the kernel and so there is no need for this call. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: re-organize code to improve readabilityShay Agroskin
Restructure some ethtool to a switch-case blocks to make it more uniform with other similar functions. Also restructure variable declaration to create reversed x-mas tree. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: Use dev_alloc() in RX buffer allocationShay Agroskin
Use dev_alloc() when allocating RX buffers instead of specifying the allocation flags explicitly. This result in same behaviour with less code. Also move the page allocation and its DMA mapping into a function. This creates a logical block, which may help understanding the code. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: aggregate doorbell common operations into a functionShay Agroskin
The ena_ring_tx_doorbell() is introduced to call the doorbell and increase the driver's corresponding stat. Signed-off-by: Ido Segev <idose@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: Remove module param and change message severityShay Agroskin
Remove the module param 'debug' which allows to specify the message level of the driver. This value can be specified using ethtool command. Also reduce the message level of LLQ support to be a warning since it is not an indication of an error. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: add jiffies of last napi call to statsShay Agroskin
There are instances when we want to know when the last napi was called for debugging. On stuck / heavy loaded CPUs, the ena napi handler might not be called for a long period of time. This stat can help us to determine how much time passed since the last execution of napi. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08net: ena: use build_skb() in RX pathShay Agroskin
This patch converts the RX path to use build_skb() for packets larger than copybreak (set to 256 by default). This function makes the first descriptor's page to be the linear part of the sk_buff struct buffer. Also remove the SKB description from the README since most of it no longer relevant and the parts that are left don't add information. Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-24 23:10:36 +0000