summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/apple
AgeCommit message (Collapse)Author
2013-11-11macmace: add missing platform_set_drvdata() in mace_probe()Wei Yongjun
Add missing platform_set_drvdata() in mace_probe(), otherwise calling platform_get_drvdata() in mac_mace_device_remove() may returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: Restore unintentional reverts.David S. Miller
This restores commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c which initially accidently went into 'net', were reverted there, and then properly placed into 'net-next'. But the next net --> net-next merge accidently wiped them out again. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17net: ethernet: apple: initialize variables directlyEmilio López
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03net/apple: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-06ethernet: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A. Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08mace: Fix build for mace due to netdev_alloc_skbPradeep A. Dalvi
Refs: 1. pmac32_defconfig http://kisskb.ellerman.id.au/kisskb/buildresult/5583746/ 2. ppc6xx_defconfig http://kisskb.ellerman.id.au/kisskb/buildresult/5584116/ Confirmed any such occurances from all failed defconfigs & in net-next sources with grep -nrs "netdev_alloc_skb" drivers/net/ethernet/ | grep -v "," Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove unnecessary k.alloc/v.alloc OOM messagesJoe Perches
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-01net/ethernet: Move mac89x0.c from apple to cirrusGeert Uytterhoeven
Macintosh CS89x0 based ethernet cards use a Crystal Semiconductor (Now Cirrus Logic) CS89x0 chip, so the mac89x0 driver should be in drivers/net/ethernet/cirrus instead of drivers/net/ethernet/apple. This also fixes a build problem, as the driver needs a header file from the cirrus directory: drivers/net/ethernet/apple/mac89x0.c:107:20: error: cs89x0.h: No such file or directory Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18cs89x0: Move the driver into the Cirrus dirJeff Kirsher
The cs89x0 driver was initial placed in the apple/ when it should have been placed in the cirrus/. This resolves the issue by moving the dirver and fixing up the respective Kconfig(s) and Makefile(s). Thanks to Sascha for reporting the issue. -v2 Fix a config error that was introduced with v1 by removing the dependency on MACE for NET_VENDOR_APPLE. CC: Russell Nelson <nelson@crynwr.com> CC: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21macmace, macsonic: cleanupFinn Thain
We check ether_type before registering the platform device in arch/m68k/mac/config.c. Doing the same test again in the driver is redundant so remove it. Multiple probes should not happen since the conversion to platform devices, so lose that test too. Then macmace.c need not include macintosh.h, so remove that and irq.h and include linux/interrupt.h explicitly. Tested on PowerBook 520, Quadra 660av, LC 630. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-27drivers/net/ethernet/*: Enabled vendor Kconfig optionsJeff Kirsher
Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) driversJeff Kirsher
Move the Apple drivers into driver/net/ethernet/apple/ and make the necessary Kconfig and Makefile changes. CC: Paul Mackerras <paulus@samba.org> CC: Paul Mackerras <paulus@au.ibm.com> CC: Russell Nelson <nelson@crynwr.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>