summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
AgeCommit message (Collapse)Author
2023-08-18bnxt_en: Add tx_resets ring counterMichael Chan
Add a new tx_resets ring counter. This counter will be saved as tx_total_resets across any reset. Since we currently do a full reset in bnxt_sched_reset_txr(), the per ring counter will always be cleared during reset. Only the tx_total_resets count will be meaningful and we only display this under ethtool -S. Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/ Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230817231911.165035-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18bnxt_en: Display the ring error counters under ethtool -SMichael Chan
The existing driver displays the sum of 4 ring counters under ethtool -S. These counters are in the array bnxt_sw_func_stats. These counters are summed at the time of ethtool -S and will be lost when the device is reset. Replace these counters with the new total ring error counters added in the last patch. These new counters are saved before reset. ethtool -S will now display the sum of the saved counters plus the current counters. Link: https://lore.kernel.org/netdev/CACKFLimD-bKmJ1tGZOLYRjWzEwxkri-Mw7iFme1x2Dr0twdCeg@mail.gmail.com/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230817231911.165035-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08bnxt_en: Don't issue AP reset during ethtool's reset operationSreekanth Reddy
Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") 924531326e2d ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29bnxt_en: Add missing 200G link speed reportingMichael Chan
bnxt_fw_to_ethtool_speed() is missing the case statement for 200G link speed reported by firmware. As a result, ethtool will report unknown speed when the firmware reports 200G link speed. Fixes: 532262ba3b84 ("bnxt_en: ethtool: support PAM4 link speeds up to 200G") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29bnxt_en: Fix reporting of test result in ethtool selftestKalesh AP
When the selftest command fails, driver is not reporting the failure by updating the "test->flags" when bnxt_close_nic() fails. Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13bnxt: avoid overflow in bnxt_get_nvram_directory()Maxim Korotkov
The value of an arithmetic expression is subject of possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Security Code and Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20bnxt: Do not read past the end of test namesKees Cook
Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-01bnxt: report FEC block stats via standard interfaceJakub Kicinski
I must have missed that these stats are only exposed via the unstructured ethtool -S when they got merged. Plumb in the structured form. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221130013108.90062-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-08bnxt_en: update RSS config using difference algorithmEdwin Peer
Hardware is unable to realize all legal firmware interface state values for hash_type. For example, if 4-tuple TCP_IPV4 hash is enabled, 4-tuple UDP_IPV4 hash must also be enabled. By providing the bits the user intended to change instead of the possible illegal intermediate states, the firmware is able to make better compromises when deciding which bits to ignore. With this new mechansim, we can now report the actual configured hash back to the user. Add bnxt_hwrm_update_rss_hash_cfg() to report the actual hash after user configuration. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-08ethtool: linkstate: add a statistic for PHY down eventsJakub Kicinski
The previous attempt to augment carrier_down (see Link) was not met with much enthusiasm so let's do the simple thing of exposing what some devices already maintain. Add a common ethtool statistic for link going down. Currently users have to maintain per-driver mapping to extract the right stat from the vendor-specific ethtool -S stats. carrier_down does not fit the bill because it counts a lot of software related false positives. Add the statistic to the extended link state API to steer vendors towards implementing all of it. Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly) enic also have a counter for this but I leave the implementation to their maintainers. Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-04bnxt_en: Fix possible crash in bnxt_hwrm_set_coal()Michael Chan
During the error recovery sequence, the rtnl_lock is not held for the entire duration and some datastructures may be freed during the sequence. Check for the BNXT_STATE_OPEN flag instead of netif_running() to ensure that the device is fully operational before proceeding to reconfigure the coalescing settings. This will fix a possible crash like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 10 PID: 181276 Comm: ethtool Kdump: loaded Tainted: G IOE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/0F9N89, BIOS 2.3.10 08/15/2019 RIP: 0010:bnxt_hwrm_set_coal+0x1fb/0x2a0 [bnxt_en] Code: c2 66 83 4e 22 08 66 89 46 1c e8 10 cb 00 00 41 83 c6 01 44 39 b3 68 01 00 00 0f 8e a3 00 00 00 48 8b 93 c8 00 00 00 49 63 c6 <48> 8b 2c c2 48 8b 85 b8 02 00 00 48 85 c0 74 2e 48 8b 74 24 08 f6 RSP: 0018:ffffb11c8dcaba50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d168a8b0ac0 RCX: 00000000000000c5 RDX: 0000000000000000 RSI: ffff8d162f72c000 RDI: ffff8d168a8b0b28 RBP: 0000000000000000 R08: b6e1f68a12e9a7eb R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000037 R12: ffff8d168a8b109c R13: ffff8d168a8b10aa R14: 0000000000000000 R15: ffffffffc01ac4e0 FS: 00007f3852e4c740(0000) GS:ffff8d24c0080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041b3ee003 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ethnl_set_coalesce+0x3ce/0x4c0 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? coalesce_fill_reply+0x480/0x480 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? syscall_trace_enter+0x1d3/0x2c0 ? __audit_syscall_exit+0x249/0x2a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f38524163bb Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24bnxt_en: check and resize NVRAM UPDATE entry before flashingVikas Gupta
Resize of the UPDATE entry is required if the image to be flashed is larger than the available space. Add this step, otherwise flashing larger firmware images by ethtool or devlink may fail. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24bnxt_en: add .get_module_eeprom_by_page() supportVikas Gupta
Add support for .get_module_eeprom_by_page() callback which implements generic solution for module`s eeprom access. v3: Add bnxt_get_module_status() to get a more specific extack error string. Return -EINVAL from bnxt_get_module_eeprom_by_page() when we don't want to fallback to old method. v2: Simplification suggested by Ido Schimmel Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/ Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28bnxt_en: implement callbacks for devlink selftestsvikas
Add callbacks ============= .selftest_check: returns true for flash selftest. .selftest_run: runs a flash selftest. Also, refactor NVM APIs so that they can be used with devlink and ethtool both. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13bnxt_en: parse and report result field when NVRAM package install failsKalesh AP
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. This is version 2 of the earlier patch that was reverted: 02acd399533e ("bnxt_en: parse result field when NVRAM package install fails") In this new version, if the call is made through devlink instead of ethtool, we'll also set the error message in extack. Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-13bnxt_en: Enable packet timestamping for all RX packetsPavan Chebbi
Add driver support to enable timestamping on all RX packets that are received by the NIC. This capability can be requested by the applications using SIOCSHWTSTAMP ioctl with filter type HWTSTAMP_FILTER_ALL. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-08bnxt: support transmit and free of aggregation buffersAndy Gospodarek
This patch adds the following features: - Support for XDP_TX and XDP_DROP action when using xdp_buff with frags - Support for freeing all frags attached to an xdp_buff - Cleanup of TX ring buffers after transmits complete - Slight change in definition of bnxt_sw_tx_bd since nr_frags and RX producer may both need to be used - Clear out skb_shared_info at the end of the buffer v2: Fix uninitialized variable warning in bnxt_xdp_buff_frags_free(). Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09bnxt: revert hastily merged uAPI aberrationsJakub Kicinski
This reverts: commit 02acd399533e ("bnxt_en: parse result field when NVRAM package install fails") commit 22f5dba5065d ("bnxt_en: add an nvm test for hw diagnose") commit bafed3f231f7 ("bnxt_en: implement hw health reporter") These patches are still under discussion / I don't think they are right, and since the authors don't reply promptly let me lessen my load of "things I need to resolve before next release" and revert them. Acked-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220308173659.304915-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-05bnxt_en: add an nvm test for hw diagnoseVikas Gupta
Add an NVM test function for devlink hw reporter. In this function an NVM VPD area is read followed by a write. Test result is cached and if it is successful then the next test can be conducted only after HW_RETEST_MIN_TIME to avoid frequent writes to the NVM. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Eliminate unintended link toggle during FW resetMichael Chan
If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: Properly report no pause support on some cardsMichael Chan
Some cards are configured to never support link pause or PFC. Discover these cards and properly report no pause support to ethtool. Disable PFC settings from DCBNL if PFC is unsupported. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: introduce initial link state of unknownEdwin Peer
This will force link state to always be logged for initial NIC open. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: parse result field when NVRAM package install failsKalesh AP
Instead of always returning -ENOPKG, decode the firmware error code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails. Return a more suitable error code to userspace and log an error in dmesg. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: add more error checks to HWRM_NVM_INSTALL_UPDATEKalesh AP
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK" in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has failed due to Anti-rollback feature. Parse the error and return an appropriate error code to the user. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-05bnxt_en: refactor error handling of HWRM_NVM_INSTALL_UPDATEKalesh AP
This is in anticipation of handling more "cmd_err" from FW in the next patch. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/mptcp/mptcp_join.sh 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") 857898eb4b28 ("selftests: mptcp: add missing join check") 6ef84b1517e0 ("selftests: mptcp: more robust signal race test") https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/ drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions") c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information") 09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr") 84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr") efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow") 3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-20bnxt_en: Fix occasional ethtool -t loopback test failuresMichael Chan
In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89b97a ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix offline ethtool selftest with RDMA enabledMichael Chan
For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Ben Li <ben.li@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix active FEC reporting to ethtoolSomnath Kotur
ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28bnxt: report header-data split stateJakub Kicinski
Aggregation rings imply header-data split. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09bnxt_en: use firmware provided max timeout for messagesEdwin Peer
Some older devices cannot accommodate the 40 seconds timeout cap for long running commands (such as NVRAM commands) due to hardware limitations. Allow these devices to request more time for these long running commands, but print a warning, since the longer timeout may cause the hung task watchdog to trigger. In the case of a firmware update operation, this is preferable to failing outright. v2: Use bp->hwrm_cmd_max_timeout directly without the constants. Fixes: 881d8353b05e ("bnxt_en: Add an upper bound for all firmware command timeouts.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-27bnxt_en: Support CQE coalescing mode in ethtoolMichael Chan
Support showing and setting the CQE mode in ethtool. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Provide stored devlink "fw" version on older firmwareVikas Gupta
On older firmware that doesn't support the HWRM_NVM_GET_DEV_INFO command that returns detailed stored firmware versions, fallback to use the same firmware package version that is reported to ethtool. Refactor bnxt_get_pkgver() in bnxt_ethtool.c so that devlink can call and get the package version. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Update firmware interface to 1.10.2.63Michael Chan
The main changes are firmware live patch support and 2 additional FEC standard counters. Add the matching FEC counters to ethtool counter array. Firmware older than 220 does not return the proper size of the extended RX counters so we need to cap it at the smaller legacy size. Otherwise the new FEC counters may show up with garbage values. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: move coredump functions into dedicated fileEdwin Peer
Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Refactor coredump functionsEdwin Peer
The coredump functionality will be used by devlink health. Refactor these functions that get coredump and coredump length. There is no functional change, but the following checkpatch warnings were addressed: - strscpy is preferred over strlcpy. - sscanf results should be checked, with an additional warning. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: add enable_remote_dev_reset devlink parameterEdwin Peer
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-10bnxt: use netif_is_rxfh_configured instead of open codeJuhee Kang
The open code which is dev->priv_flags & IFF_RXFH_CONFIGURED is defined as a helper function on netdevice.h. So use netif_is_rxfh_configured() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20bnxt_en: Fix TX timeout when TX ring size is set to the smallestMichael Chan
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: move HWRM API implementation into separate fileEdwin Peer
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27bnxt: count packets discarded because of netpollJakub Kicinski
bnxt may discard packets if Rx completions are consumed in an attempt to let netpoll make progress. It should be extremely rare in practice but nonetheless such events should be counted. Since completion ring memory is allocated dynamically use a similar scheme to what is done for HW stats to save them. Report the stats in rx_dropped and per-netdev ethtool counter. Chances that users care which ring dropped are very low. v3: only save the stat to rx_dropped on reset, rx_total_netpoll_discards will now only show drops since last reset, similar to other "total_discard" counters. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23net: broadcom: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03bnxt_en: Increase maximum RX ring size if jumbo ring is not usedMichael Chan
The current maximum RX ring size is defined assuming the RX jumbo ring (aka aggregation ring) is used. The RX jumbo ring is automicatically used when the MTU exceeds a threshold or when rx-gro-hw/lro is enabled. The RX jumbo ring is automatically sized up to 4 times the size of the RX ring size. The BNXT_MAX_RX_DESC_CNT constant is the upper limit on the size of the RX ring whether or not the RX jumbo ring is used. Obviously, the maximum amount of RX buffer space is significantly less when the RX jumbo ring is not used. To increase flexibility for the user who does not use the RX jumbo ring, we now define a bigger maximum RX ring size when the RX jumbo ring is not used. The maximum RX ring size is now up to 8K when the RX jumbo ring is not used. The maximum completion ring size also needs to be scaled up to accomodate the larger maximum RX ring size. Note that when the RX jumbo ring is re-enabled, the RX ring size will automatically drop if it exceeds the maximum. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-14 19:40:49 +0000