summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/cnic_if.h
AgeCommit message (Collapse)Author
2015-08-06cnic: Add the interfaces to get FC-NPIV table.Adheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06cnic: Populate upper layer driver state in MFWTej Parkash
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bnx2-cnic: Driver Version UpdateRasesh Mody
This patch updates BNX2 driver version to 2.2.6 and CNIC driver version to 2.5.21. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bnx2-cnic: Driver Rebranding ChangesRasesh Mody
This patch provides additional changes as a part of BNX2 and CNIC driver re-branding effort. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25cnic: Rebranding cnic driver.Jitendra Kalsaria
o QLogic has acquired the NetXtremeII products and drivers from Broadcom. This patch re-brands cnic driver as a QLogic driver Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-18cnic: Update version to 2.5.20 and copyright year.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-18cnic,bnx2i,bnx2fc: Fix inconsistent use of page sizeMichael Chan
The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01cnic: Add a signature to indicate valid doorbell offset.Eddie Wai
The buffer that is used to pass doorbell offset to the userspace UIO driver may contain nonzero value in older versions of bnx2x driver. Userspace cannot easily tell whether it contains a valid doorbell offset or not. With the added signature, userspace will only use the doorbell offset if the signature is present. Update version to 2.5.19. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24broadcom: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04cnic: Update version to 2.5.18.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02ethernet: Convert mac address uses of 6 to ETH_ALENJoe Perches
Use the normal #define to help grep find mac addresses and ensure that addresses are aligned. pasemi.h has an unaligned access to mac_addr, unchanged for now. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Olof Johansson <olof@lixom.net> # pasemi_mac pieces Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29cnic: Update version to 2.5.17 and copyright year.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-25bnx2x, bnx2fc: Use per port max exchange resourcesBhanu Prakash Gollapudi
The firmware supports a maximum of 4K FCoE exchanges. In 4-port devices, or when working in multi-function mode, this resource needs to be distributed between the various possible FCoE functions. This information needs to be calculated by bnx2x and propagated into bnx2fc via cnic. bnx2fc can then use this value to calculate corresponding xid resources instead of using global constants. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23cnic, bnx2x: Add CNIC_DRV_STATE_HANDLES_IRQ to ethdev->drv_stateMichael Chan
In INTA mode, cnic and bnx2x share the same IRQ. During chip reset, for example, cnic will stop servicing IRQs after it has shutdown the cnic hardware resources. However, the shared IRQ is still active as bnx2x needs to finish the reset. There is a window when bnx2x does not know that cnic is no longer handling IRQ and things don't always work properly. Add a flag to tell bnx2x that cnic is handling IRQ. The flag is set before the first cnic IRQ is expected and cleared when no more cnic IRQs are expected, so there should be no race conditions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07cnic, bnx2x, bnx2: Simplify cnic probing.Michael Chan
Instead of using symbol_get(), cnic can now directly call the cnic_probe functions in struct bnx2x and struct bnx2. symbol_get() is not reliable as it fails when the module is still initializing. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-05cnic: Fix rare race condition during iSCSI disconnect.Eddie Wai
If the initiator and target try to close the connection at about the same time, there is a race condition in the termination sequence for bnx2x. Fix the problem by waiting for the remote termination to complete before deleting the Connection ID. This will prevent the firmware assert. Update version to 2.5.15. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01bnx2x,cnic: use FW 7.8.2Yuval Mintz
This patch moves the bnx2x and cnic drivers into using FW 7.8.2 which was recently submitted into the linux-firmware tree. A short summary of minor bugs fixed by this FW: 1. In switch dependent mode, fix several issues regarding inner vlan vs. DCB priorities. 2. iSCSI - not all packets were completed on a forward channel. 3. DCB - fixed for 4-port devices. 4. Fixed false parity reported in CAM memories when operating near -5% on the 1.0V core supply. 5. ETS default settings are set to fairness between traffic classes (rather than strict priority), and uses the same chip receive buffer configuration for both PFC and pause. For a complete list of fixes made by this FW, see commit 236367db in the linux-firmware git repository. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10cnic: Allocate UIO resources only on devices that support iSCSI.Michael Chan
Update version to 2.5.13. Reviewed-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29cnic: Fix mmap regression.Michael Chan
commit 1f85d58cdf15354a7120fc9ccc9bb9c45b53af88 cnic: Remove uio mem[0]. introduced a regression as older versions of userspace app still rely on this mmap. Restore the mmap functionality and get the base address from pci_resource_start() as the nedev->base_addr has been deprecated for PCI devices. Update version to 2.5.12. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27cnic: Handle RAMROD_CMD_ID_CLOSE error.Eddie Wai
If firmware returns error status, proceed to close the iSCSI connection. Update version to 2.5.11. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski
advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21cnic: Fix parity error code conflictMichael Chan
The recently added parity error handling used an error code that was already defined for a different error. This could lead to bnx2x firmware assert. We need to fix this with new error codes that are defined for parity error only. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-09cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATEEddie Wai
This will support the new VLAN attribute in the iSCSI iface file. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05cnic: Improve error recovery on bnx2x devicesMichael Chan
When a bnx2x device encounters parity errors, it will not respond to all SPQ messages. As a result, the shutdown sequence before reset can take a long time as the ulp drivers (bnx2i/bnx2fc) have to wait for timeout of all such messages. To improve this scenario, when bnx2x returns error on the SPQ, we'll send an immediate response to the ulp drivers to avoid such lengthy timeouts. Adjust the return code of relevant functions to return error only if the message cannot be sent on the SPQ so that we'll generate an error completion to the ulp drivers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x, cnic: support DRV_INFO upon FW requestBarak Witkowski
Add support to send driver capabilities, settings and statistics to management firmware. [ Redone using many local variables, removed many unnecessary inlines, and put #defines at the left margin suggested by Joe Perches ] Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10broadcom: Move the Broadcom driversJeff Kirsher
Moves the drivers for Broadcom devices into drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile changes. CC: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Gary Zambrano <zambrano@broadcom.com> CC: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>