summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/tg3.c
AgeCommit message (Collapse)Author
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-14tg3: prevent scheduling while atomic splatJonathan Toppins
The problem was introduced in commit 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19tg3: APE heartbeat changesPrashant Sreedharan
In ungraceful host shutdown or driver crash case BMC connectivity is lost. APE firmware is missing the driver state in this case to keep the BMC connectivity alive. This patch has below change to address this issue. Heartbeat mechanism with APE firmware. This heartbeat mechanism is needed to notify the APE firmware about driver state. This patch also has the change in wait time for APE event from 1ms to 20ms as there can be some delay in getting response. v2: Drop inline keyword as per David suggestion. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-04tg3: Add Macronix NVRAM supportPrashant Sreedharan
This patch adds the support for Macronix NVRAM Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Enable PHY reset in MTU change path for 5720Siva Reddy Kallam
A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Add workaround to restrict 5762 MRRS to 2048Siva Reddy Kallam
One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Update copyrightSiva Reddy Kallam
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19tg3: Fix rx hang on MTU change with 5717/5719Brian King
This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-21drivers: net: tg3: use setup_timer() helper.Allen Pais
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-14tg3: clean up redundant initialization of tnapiColin Ian King
tnapi is being initialized and then immediately updated and hence the initialiation is redundant. Clean up the warning by moving the declaration and initialization to the inside of the for-loop. Cleans up clang scan-build warning: warning: Value stored to 'tnapi' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24tg3: Be drop monitor friendlyFlorian Fainelli
tg3_tx() does the normal packet TX completion, tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a new SKB that is suitable to workaround HW bugs, and finally tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for these 3 locations to be SKB drop monitor friendly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13net: phy: Make phy_ethtool_ksettings_get return voidyuval.shaia@oracle.com
Make return value void since function never return meaningfull value Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03tg3: don't clear stats while tg3_closeYueHaibing
Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse its salves to get statistics,cumulative the increment.If a tg3 NIC is added to bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value (ex.1638.3 PiB) because of negative increment. Fixes: 92feeabf3f67 ("tg3: Save stats across chip resets") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09tg3: Add the ability to conditionally build w/ HWMONFlorian Fainelli
Introduce a Kconfig option: CONFIG_TIGON3_HWMON which allows to build in/out support for thermal sensors reported by Tigon3 NICs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07tg3: Fix race condition in tg3_get_stats64().Michael Chan
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/broadcom: use core min/max MTU checkingJarod Wilson
tg3: min_mtu 60, max_mtu 9000/1500 bnxt: min_mtu 60, max_mtu 9000 bnx2x: min_mtu 46, max_mtu 9600 - Fix up ETH_OVREHEAD -> ETH_OVERHEAD while we're in here, remove duplicated defines from bnx2x_link.c. bnx2: min_mtu 46, max_mtu 9000 - Use more standard ETH_* defines while we're at it. bcm63xx_enet: min_mtu 46, max_mtu 2028 - compute_hw_mtu was made largely pointless, and thus merged back into bcm_enet_change_mtu. b44: min_mtu 60, max_mtu 1500 CC: netdev@vger.kernel.org CC: Michael Chan <michael.chan@broadcom.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com CC: Siva Reddy Kallam <siva.kallam@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30tg3: Avoid NULL pointer dereference in tg3_io_error_detected()Milton Miller
While the driver is probing the adapter, an error may occur before the netdev structure is allocated and attached to pci_dev. In this case, not only netdev isn't available, but the tg3 private structure is also not available as it is just math from the NULL pointer, so dereferences must be skipped. The following trace is seen when the error is triggered: [1.402247] Unable to handle kernel paging request for data at address 0x00001a99 [1.402410] Faulting instruction address: 0xc0000000007e33f8 [1.402450] Oops: Kernel access of bad area, sig: 11 [#1] [1.402481] SMP NR_CPUS=2048 NUMA PowerNV [1.402513] Modules linked in: [1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu [1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000 [1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0 [1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic) [1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000 [1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1 GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000 GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299 GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006 GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768 GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002 GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000 [1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340 [1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340 This patch avoids the NULL pointer dereference by moving the access after the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan]. Fixes: 0486a063b1ff ("tg3: prevent ifup/ifdown during PCI error recovery") Fixes: dfc8f370316b ("net/tg3: Release IRQs on permanent error") Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: tg3: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01tg3: Fix for disallow tx coalescing time to be 0Ivan Vecera
The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing time to be 0" disallow to set Rx coalescing time to be 0 as this stops generating interrupts for the incoming packets. I found the zero Tx coalescing time stops generating interrupts for outgoing packets as well and fires Tx watchdog later. To avoid this, don't allow to set Tx coalescing time to 0 and also remove subsequent checks that become senseless. Cc: satish.baddipadige@broadcom.com Cc: siva.kallam@broadcom.com Cc: michael.chan@broadcom.com Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Report the correct number of RSS queues through tg3_get_rxnfcSiva Reddy Kallam
This patch remove the wrong substraction from info->data in tg3_get_rxnfc function. Without this patch, the number of RSS queues reported is less by one. Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-03tg3: Fix for diasllow rx coalescing time to be 0Satish Baddipadige
When the rx coalescing time is 0, interrupts are not generated from the controller and rx path hangs. To avoid this rx hang, updating the driver to not allow rx coalescing time to be 0. Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-09tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segsSiva Reddy Kallam
tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: tg3: avoid uninitialized variable warningArnd Bergmann
The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01tg3: Fix temperature reportingJean Delvare
The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0bf493 ("tg3: Add hwmon support for temperature") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: stable@vger.kernel.org [v3.6+] Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12bnx2x, tg3: Replace put_page(virt_to_head_page()) with skb_free_frag()Alexander Duyck
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-25net/tg3: Release IRQs on permanent errorGavin Shan
When having permanent EEH error, the PCI device will be removed from the system. For this case, we shouldn't set pcierr_recovery to true wrongly, which blocks the driver to release the allocated interrupts and their handlers. Eventually, we can't disable MSI or MSIx successfully because of the MSI or MSIx interrupts still have associated interrupt actions, which is turned into following stack dump. Oops: Exception in kernel mode, sig: 5 [#1] : [c0000000003b76a8] .free_msi_irqs+0x80/0x1a0 (unreliable) [c00000000039f388] .pci_remove_bus_device+0x98/0x110 [c0000000000790f4] .pcibios_remove_pci_devices+0x9c/0x128 [c000000000077b98] .handle_eeh_events+0x2d8/0x4b0 [c0000000000782d0] .eeh_event_handler+0x130/0x1c0 [c000000000022bd4] .kernel_thread+0x54/0x70 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: tg3: use helpers for converting ns to timespec.Richard Cochran
This patch changes the driver to use ns_to_timespec64() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: tg3: convert to the 64 bit get/set time methods.Richard Cochran
The device appears to use a 64 bit nanoseconds register, and so with this patch the driver should be ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06tg3: use napi_complete_done()Eric Dumazet
Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. Tested: lpx:~# echo 0 >/sys/class/net/eth1/gro_flush_timeout lpx:~# sar -n DEV 1 10 | grep eth1 10:36:25 AM eth1 81290.00 40617.00 120479.67 2777.01 0.00 0.00 0.00 10:36:26 AM eth1 81283.00 40608.00 120481.81 2778.13 0.00 0.00 1.00 10:36:27 AM eth1 81304.00 40639.00 120518.42 2778.28 0.00 0.00 0.00 10:36:28 AM eth1 81255.00 40605.00 120437.34 2775.95 0.00 0.00 1.00 10:36:29 AM eth1 81306.00 40630.00 120521.44 2777.70 0.00 0.00 0.00 10:36:30 AM eth1 81286.00 40564.00 120480.20 2773.31 0.00 0.00 0.00 10:36:31 AM eth1 81256.00 40599.00 120438.81 2776.27 0.00 0.00 0.00 10:36:32 AM eth1 81287.00 40594.00 120480.69 2776.69 0.00 0.00 0.00 10:36:33 AM eth1 81279.00 40601.00 120478.53 2775.84 0.00 0.00 0.00 10:36:34 AM eth1 81277.00 40610.00 120476.94 2776.25 0.00 0.00 0.00 Average: eth1 81282.30 40606.70 120479.39 2776.54 0.00 0.00 0.20 lpx:~# echo 13000 >/sys/class/net/eth1/gro_flush_timeout lpx:~# sar -n DEV 1 10 | grep eth1 10:36:43 AM eth1 81257.00 7747.00 120437.44 530.00 0.00 0.00 0.00 10:36:44 AM eth1 81278.00 7748.00 120480.00 529.85 0.00 0.00 0.00 10:36:45 AM eth1 81282.00 7752.00 120479.09 531.09 0.00 0.00 0.00 10:36:46 AM eth1 81282.00 7751.00 120478.80 530.90 0.00 0.00 0.00 10:36:47 AM eth1 81276.00 7745.00 120478.31 529.64 0.00 0.00 0.00 10:36:48 AM eth1 81278.00 7747.00 120478.50 529.81 0.00 0.00 0.00 10:36:49 AM eth1 81282.00 7749.00 120478.88 530.01 0.00 0.00 0.00 10:36:50 AM eth1 81284.00 7751.00 120481.52 530.20 0.00 0.00 0.00 10:36:51 AM eth1 81299.00 7769.00 120481.74 533.81 0.00 0.00 0.00 10:36:52 AM eth1 81281.00 7748.00 120478.62 529.96 0.00 0.00 0.00 Average: eth1 81279.90 7750.70 120475.29 530.53 0.00 0.00 0.00 Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()Jun'ichi Nomura \(NEC\)
tg3_init_one() calls tg3_halt() without tp->lock despite its assumption and causes deadlock. If lockdep is enabled, a warning like this shows up before the stall: [ BUG: bad unlock balance detected! ] 3.19.0test #3 Tainted: G E ------------------------------------- insmod/369 is trying to release lock (&(&tp->lock)->rlock) at: [<ffffffffa02d5a1d>] tg3_chip_reset+0x14d/0x780 [tg3] but there are no more locks to release! tg3_init_one() doesn't call tg3_halt() under normal situation but during kexec kdump I hit this problem. Fixes: 932f19de ("tg3: Release tp->lock before invoking synchronize_irq()") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14tg3: Release tp->lock before invoking synchronize_irq()Prashant Sreedharan
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14tg3: tg3_reset_task() needs to use rtnl_lock to synchronizePrashant Sreedharan
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14tg3: tg3_timer() should grab tp->lock before checking for tp->irq_syncPrashant Sreedharan
This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12tg3: move init/deinit from open/close to probe/removeIvan Vecera
Move init and deinit of PTP support from open/close functions to probe/remove funcs to avoid removing/re-adding of associated PTP device(s) during ifup/ifdown. v2: tg3_ptp_init call moved to correct place (thx. Prashant) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-22tg3: tg3_disable_ints using uninitialized mailbox value to disable interruptsPrashant Sreedharan
During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08ethtool: Support for configurable RSS hash functionEyal Perry
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-11-25tg3: fix ring init when there are more TX than RX channelsThadeu Lima de Souza Cascardo
If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-06-02 18:17:23 +0000