summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dmaFlorian Fainelli
We should not be manipulaging the DMA_CTRL registers directly by writing 0 to them to disable DMA. This is an operation that needs to be timed to make sure the DMA engines have been properly stopped since their state machine stops on a packet boundary, not immediately. Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to ensure a proper DMA engine state. As a result, we need to reorder the function bodies to resolve the use dependency. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: bcmgenet: fix TX reclaim accounting for fragmentsFlorian Fainelli
The GENET driver supports SKB fragments, and succeeds in transmitting them properly, but when reclaiming these transmitted fragments, we will only update the count of free buffer descriptors by 1, even for SKBs with fragments. This leads to the networking stack thinking it has more room than the hardware has when pushing new SKBs, and backing off consequently because we return NETDEV_TX_BUSY. Fix this by accounting for the SKB nr_frags plus one (itself) and update ring->free_bds accordingly with that value for each iteration loop in __bcmgenet_tx_reclaim(). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22tg3: Work around HW/FW limitations with vlan encapsulated framesVlad Yasevich
TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Add a fallback multi-function mode NPAR1.5Yuval Mintz
When using new Multi-function modes it's possible that due to incompatible configuration management FW will fallback into an existing mode. Notice that at the moment this fallback is exactly the same as the already existing switch-independent multi-function mode, but we still use existing infrastructure to hold this information [in case some small differences will arise in the future]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: New multi-function mode: UFPYuval Mintz
Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Changes with storage & MAC macrosDmitry Kravkov
Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: bcmgenet: communicate integrated PHY revision to PHY driverFlorian Fainelli
The integrated BCM7xxx PHY contains no useful revision information in its MII_PHYSID2 bits 3:0, that information is instead contained in the GENET hardware block. We already read the GENET 32-bit revision register, so store the integrated PHY revision in the driver private structure, and then communicate this revision value to the PHY driver by overriding the phy_flags value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: bcmgenet: remove PHY_BRCM_100MBPS_WARFlorian Fainelli
Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we can remove it from the GENET driver and the broadcom shared header file. The PHY driver checks the PHY supported bitmask instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12drivers: net: b44: Fix typo in returning multicast statsMark Einon
nstat->multicast refers to received packets, not transmitted as is returned here. Change it so that received packet stats are given. Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09drivers/net: Convert remaining uses of pr_warning to pr_warnJoe Perches
Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Typo fixes submiting/submitting o Coalesce formats o Realign arguments o Add missing terminating '\n' to formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08net: bcmgenet: check harder for out of memory conditionsFlorian Fainelli
There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08net: systemport: check harder for out of memory conditionsFlorian Fainelli
There is a potential case where we might be failing to refill a control block, leaving it with both a NULL skb pointer *and* a NULL dma_unmap_addr. The way we process incoming packets, by first calling dma_unmap_single(), and then only checking for a potential NULL skb can lead to situations where do pass a NULL dma_unmap_addr() to dma_unmap_single(), resulting in an oops. Fix this my moving the NULL skb check earlier, since no backing skb also means no corresponding DMA mapping for this packet. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-09-05cnic : Cleanup CONFIG_IPV6 & VLAN checkAnish Bhatt
The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: Anish Bhatt <anish@chelsio.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05bnx2x: Fix link problems for 1G SFP RJ45 moduleYaniv Rosner
When 1G SFP RJ45 module is detected, driver must reset the Tx laser in order to prevent link issues. As part of change, the link_attr_sync was relocated from vars to params. Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-04net: systemport: update UMAC_CMD only when link is detectedFlorian Fainelli
When we bring the interface down, phy_stop() will schedule the PHY state machine to call our link adjustment callback. By the time we do so, we may have clock gated off the SYSTEMPORT hardware block, and this will cause bus errors to happen in bcm_sysport_adj_link(): Make sure that we only touch the UMAC_CMD register when there is an actual link. This is safe to do for two reasons: - updating the Ethernet MAC registers only make sense when a physical link is present - the PHY library state machine first set phydev->link = 0 before invoking phydev->adjust_link in the PHY_HALTED case This is a similar fix to the GENET one: c677ba8b3c47650358572091ed8a6af50bfca877 ("net: bcmgenet: update UMAC_CMD only when link is detected"). Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02bnx2x: Configure device endianity on driver load and reset endianity on removal.Manish Chopra
Some hosts can be both little and big endian. In certain scenarios a big endian kernel can kexec a little endian kernel. This patch fixes this case from both ends: 1) Return endianity to original values on shutdown (in case little endian kernel boots after we shutdown). 2) Do not rely on HW reset values when loading driver in little endian kernel but configure them explicitly (in case previous kernel was big endian and did not reset the HW). Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02tg3: prevent ifup/ifdown during PCI error recoveryIvan Vecera
The patch fixes race conditions between PCI error recovery callbacks and potential ifup/ifdown. First, if ifup (tg3_open) is called between tg3_io_error_detected() and tg3_io_resume() then tp->timer is armed twice before expiry. Once during tg3_open() and again during tg3_io_resume(). This results in BUG at kernel/time/timer.c:945. Second, if ifdown (tg3_close) is called between tg3_io_error_detected() and tg3_io_resume() then tg3_napi_disable() is called twice without a tg3_napi_enable between. Once during tg3_io_error_detected() and again during tg3_close(). The tg3_io_resume() then hangs on rtnl_lock(). v2: Added logging messages per Prashant's request Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01net: systemport: tell RXCHK if we are using Broadcom tagsFlorian Fainelli
When Broadcom tags are enabled, e.g: when interfaced to an Ethernet switch, make sure that we tell the RXCHK engine that it should be expecting a 4-bytes Broadcom tag after the Ethernet MAC Source Address. Use netdev_uses_dsa() to check for that condition since that will tell us if a switch is attached to our network interface. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01bnx2x: fix tunneled GSO over IPv6Dmitry Kravkov
Set correct bit for packed description. Introduced in e42780b66aab88d3a82b6087bcd6095b90eecde7 bnx2x: Utilize FW 7.10.51 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-01bnx2x: prevent incorrect byte-swap in BEDmitry Kravkov
Fixes incorrectly defined struct in FW HSI for BE platform. Affects tunneling, tx-switching and anti-spoofing. Introduced in e42780b66aab88d3a82b6087bcd6095b90eecde7 bnx2x: Utilize FW 7.10.51 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29bnx2x: Fix sparse warningsYuval Mintz
This fixes a sprase warning introduced recently by commit eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support"), as well as another unrelated sparse endian issue. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-27bnx2x: Fix static checker warning regarding `txdata_ptr'Yuval Mintz
Incorrect checking of array instead of array contents in panic_dump flow - results of commit e261199872a2 ("bnx2x: Safe bnx2x_panic_dump()"). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25net: bnx2x: fix build error with ptpRandy Dunlap
bnx2x uses ptp functions, so it should select the provider of those functions (PTP_1588_CLOCK). Fixes these build errors: drivers/built-in.o: In function `__bnx2x_remove': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13409: undefined reference to `ptp_clock_unregister' drivers/built-in.o: In function `bnx2x_register_phc': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13202: undefined reference to `ptp_clock_register' drivers/built-in.o: In function `bnx2x_get_ts_info': /home/jim/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c:3498: undefined reference to `ptp_clock_index' Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: Fix timesync endianityMichal Kalderon
Commit eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") has a missing conversion to LE32, which will prevent the feature from working on big endian machines. Signed-off-by: Michal Kalderon <Michal.Kalderon@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: Be more forgiving toward SW GRODmitry Kravkov
This introduces 2 new relaxations in the bnx2x driver regarding GRO: 1. Don't prevent SW GRO if HW GRO is disabled. 2. If all aggregations are disabled, when GRO configuration changes there's no need to perform an inner-reload [since it will have no actual effect]. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: VF clean statisticsYuval Mintz
During statistics initialization of a VF we need to clean its statistics. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: Fix stop-on-errorYuval Mintz
When STOP_ON_ERROR is set driver will not compile. Even if it did, traffic will not pass without this patch as several fields which are verified by FW/HW on the Tx path are not properly set. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25bnx2x: ethtool -d might cause timeout in logDmitry Kravkov
This changes slightly the set of registers read during `ethtool -d'. Without this change, it's possible the HW will generate a grc Attention which will be logged into system logs as `grc timeout'. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-25net/bnx2x: Use is_kdump_kernel() to detect kdump kernelAmir Vadai
Use is_kdump_kernel() to detect kdump kernel, instead of reset_devices. CC: Ariel Elior <ariel.elior@qlogic.com> CC: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pulling to get some TIPC fixes that a net-next series depends upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: FW assertion changesAriel Elior
This is mostly a semantic change which modifies the code parsing and printing of FW asserts. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Make BP_VF more robustYuval Mintz
Prevent dereference of pointer in case it's NULL. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Prevent pci_disable_sriov with assigned VFsYuval Mintz
Trying to disable sriov when VFs are assigned may lead to all kinds of problems. This patch unifies the call in the driver to pci_disable_sriov() and prevents them if some of the PF's child VFs are marked as assigned. [Notice this is a bad scenario either way; User should not reach a point where the OS tries to disable SRIOV when a VF is assigned - but currently there's no way of preventing the user from doing so, and the ill-effect for the driver is smaller this way] Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Prevent IOV if no entries in CAMYuval Mintz
It's possible there's a bad chip configuration which will result with PCIe IOV capabilities, but with no available interrupts for VFs. In such case, we want to gracefully prevent the PF from initializing its IOV capabilities rather than encounter difficulties further along the way. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Safe bnx2x_panic_dump()Yuval Mintz
The bnx2x panic dump spills a lot of information from the driver's fastpath, but may be called while some of the fastpath is uninitialized. This patch verifies that pointers are already allocated before dereferencing them to prevent possible kernel panics. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Update driver version to 1.710.51Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Code cleanupYuval Mintz
This patch does several semantic things: - Fixing typos. - Removing unnecessary prints. - Removing unused functions and definitions. - Change 'strange' usage of boolean variables. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Add timestamping and PTP hardware clock supportMichal Kalderon
This adds a PHC to the bnx2x driver. Driver supports timestamping send/receive PTP packets, as well as adjusting the on-chip clock. The driver has been tested with linuxptp project. Signed-off-by: Michal Kalderon <Michal.Kalderon@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Utilize FW 7.10.51Dmitry Kravkov
- (L2) In some multi-function configurations, inter-PF and inter-VF Tx switching is incorrectly enabled. - (L2) Wrong assert code in FLR final cleanup in case it is sent not after FLR. - (L2) Chip may stall in very rare cases under heavy traffic with FW GRO enabled. - (L2) VF malicious notification error fixes. - (L2) Default gre tunnel to IPGRE which allows proper RSS for IPGRE packets, L2GRE traffic will reach single queue. - (FCoE) Fix data being placed in wrong buffer when corrupt FCoE frame is received. - (FCoE) Burst of FIP packets with destination MAC of ALL-FCF_MACs causes FCoE traffic to stop. Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22cnic: Replace rcu_dereference() with rcu_access_pointer()Andreea-Cristina Bernat
The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements. The following Coccinelle semantic patch was used: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: ethernet: broadcom: bnx2x: Remove redundant #ifdefRasmus Villemoes
Nothing defines _ASM_GENERIC_INT_L64_H, it is a weird way to check for 64 bit longs, and u64 should be printed using %llx anyway. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21bnx2x: Revert UNDI flushing mechanismYuval Mintz
Commit 91ebb929b6f8 ("bnx2x: Add support for Multi-Function UNDI") [which was later supposedly fixed by de682941eef3 ("bnx2x: Fix UNDI driver unload")] introduced a bug in which in some [yet-to-be-determined] scenarios the alternative flushing mechanism which was to guarantee the Rx buffers are empty before resetting them during device probe will fail. If this happens, when device will be loaded once more a fatal attention will occur; Since this most likely happens in boot from SAN scenarios, the machine will fail to load. Notice this may occur not only in the 'Multi-Function' scenario but in the regular scenario as well, i.e., this introduced a regression in the driver's ability to perform boot from SAN. The patch reverts the mechanism and applies the old scheme to multi-function devices as well as to single-function devices. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
2014-08-13tg3: fix return value in tg3_get_stats64Govindarajulu Varadarajan
When tp->hw_stats is 0, tg3_get_stats64 should display previously recorded stats. So it returns &tp->net_stats_prev. But the caller, dev_get_stats, ignores the return value. Fix this by assigning tp->net_stats_prev to stats and returning stats. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-11net: bcmgenet: correctly resume adapter from Wake-on-LANFlorian Fainelli
In case we configured the adapter to be a wake up source from Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will leave the adapter in MagicPacket matching mode, which prevents any other type of packets from reaching the RX engine. Fix this by calling bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter configuration in bcmgenet_resume(). The second problem we had was an imbalanced clock disabling in bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally disabled the clock in bcmgenet_wol_resume(). Fixes: 8c90db72f926 ("net: bcmgenet: suspend and resume from Wake-on-LAN") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11net: bcmgenet: update UMAC_CMD only when link is detectedFlorian Fainelli
When we bring the interface down, phy_stop() will schedule the PHY state machine to call our link adjustment callback. By the time we do so, we may have clock gated off the GENET hardware block, and this will cause bus errors to happen in bcmgenet_mii_setup(): Make sure that we only touch the UMAC_CMD register when there is an actual link. This is safe to do for two reasons: - updating the Ethernet MAC registers only make sense when a physical link is present - the PHY library state machine first set phydev->link = 0 before invoking phydev->adjust_link in the PHY_HALTED case Fixes: 240524089d7a ("net: bcmgenet: only update UMAC_CMD if something changed") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11net: bcmgenet: correctly suspend and resume PHY deviceFlorian Fainelli
Make sure that we properly suspend and resume the PHY device when we enter low power modes. We had two calls to bcmgenet_mii_reset() which will issue a software-reset to the PHY without using the PHY library, get rid of them since they are completely bogus and mess up with the PHY library state. Make sure that we reset the PHY library cached values (link, pause and duplex) to allow the link adjustment callback to be invoked when needed. Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks") Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-03 14:37:51 +0000