summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2024-03-04net: adopt skb_network_header_len() more broadlyEric Dumazet
(skb_transport_header(skb) - skb_network_header(skb)) can be replaced by skb_network_header_len(skb) Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len() to catch cases were the transport_header was not set. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01net: bcmasp: Add support for PHY interruptsJustin Chen
Hook up the phy interrupts for internal phys to reduce mdio traffic and improve responsiveness of link changes. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01net: bcmasp: Keep buffers through power managementJustin Chen
There is no advantage of freeing and re-allocating buffers through suspend and resume. This waste cycles and makes suspend/resume time longer. We also open ourselves to failed allocations in systems with heavy memory fragmentation. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01net: bcmasp: Add support for ASP 2.2Justin Chen
ASP 2.2 improves power savings during low power modes. A new register was added to toggle to a slower clock during low power modes. EEE was broken for ASP 2.0/2.1. A HW workaround was added for ASP 2.2 that requires toggling a chicken bit. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-27bnxt_en: fix accessing vnic_info before allocating itAlexander Lobakin
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ #49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64e9990 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240226144911.1297336-1-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/ipv4/udp.c f796feabb9f5 ("udp: add local "peek offset enabled" flag") 56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)") Adjacent changes: net/unix/garbage.c aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.") 11498715f266 ("af_unix: Remove io_uring code for GC.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22bnxt_en: Use the new VNIC to create ntuple filtersPavan Chebbi
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create ntuple filters when supported by firmware. All RX rings can be used regardless of the RSS indirection setting on the default VNIC. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Create and setup the additional VNIC for adding ntuple filtersPavan Chebbi
Allocate and setup the additional VNIC for ntuple filters if this new method is supported by the firmware. Even though this VNIC is only used for ntuple filters with direct ring destinations, we still setup the RSS hash to be identical to the default VNIC so that each RX packet will have the correct hash in the RX completion. This VNIC is always at VNIC index BNXT_VNIC_NTUPLE. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Provision for an additional VNIC for ntuple filtersPavan Chebbi
On newer chips that support the ring table index method for ntuple filters, the current scheme of using the same VNIC for both RSS and ntuple filters will not work in all cases. An ntuple filter can only be directed to a destination ring if that destination ring is also in the RSS indirection table. To support ntuple filters with any arbitratry RSS indirection table that may only include a subset of the rings, we need to use a separate VNIC for ntuple filters. This patch provisions the additional VNIC. The next patch will allocate additional VNIC from firmware and set it up. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic indexPavan Chebbi
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Refactor bnxt_set_features()Pavan Chebbi
Refactor bnxt_set_features() function to have a common function to re-init. We'll need this to reinitialize when ntuple configuration changes. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Add bnxt_get_total_vnics() to calculate number of VNICsVenkat Duvvuru
Refactor the code by adding a new function to calculate the number of required VNICs. This is used in multiple places when reserving or checking resources. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Check additional resources in bnxt_check_rings()Michael Chan
bnxt_check_rings() is called to check if we have enough resource assets to satisfy the new number of ethtool channels. If the asset test fails, the ethtool operation will fail gracefully. Otherwise we will proceed and commit to use the new number of channels. If it fails to allocate any resources, the chip will fail to come up. For completeness, check all possible resources before committing to the new settings. Add the missing ring group and RSS context asset tests in bnxt_check_rings(). Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Improve RSS context reservation infrastructurePavan Chebbi
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc. With these, we can now specific the exact number of RSS contexts to reserve and store the reserved value. The original code relies on other resources to infer the number of RSS contexts to reserve and the reserved value is not stored. This improved infrastructure will make the RSS context accounting more complete and is needed by later patches. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Explicitly specify P5 completion rings to reserveMichael Chan
The current code assumes that every RX ring group and every TX ring requires a completion ring on P5_PLUS chips. Now that we have the bnxt_hw_rings structure, add the cp_p5 field so that it can be explicitly specified. This makes the logic more clear. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Refactor ring reservation functionsMichael Chan
The current functions to reserve hardware rings pass in 6 different ring or resource types as parameters. Add a structure bnxt_hw_rings to consolidate all these parameters and pass the structure pointer instead to these functions. Add 2 related helper functions also. This makes the code cleaner and makes it easier to add new resources to be reserved. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-21Revert "net: bcmgenet: Ensure MDIO unregistration has clocks enabled"Florian Fainelli
This reverts commit 1b5ea7ffb7a3bdfffb4b7f40ce0d20a3372ee405 ("net: bcmgenet: Ensure MDIO unregistration has clocks enabled"). This is no longer necessary now that the MDIO bus controller has a clock that it can manage around the I/O accesses. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net: bcmgenet: Pass "main" clock down to the MDIO driverFlorian Fainelli
GENET has historically had to create a MDIO platform device for its controller and pass some auxiliary data to it, like a MDIO completion callback. Now we also pass the "main" clock to allow for the MDIO bus controller to manage that clock adequately around I/O accesses. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21tg3: simplify tg3_phy_autoneg_cfgHeiner Kallweit
Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21tg3: copy only needed fields from userspace-provided EEE dataHeiner Kallweit
The current code overwrites fields in tp->eee with unchecked data from edata, e.g. the bitmap with supported modes. ethtool properly returns the received data from get_eee() call, but we have no guarantee that other users of the ioctl set_eee() interface behave properly too. Therefore copy only fields which are actually needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-18net: bcmasp: Sanity check is off by oneJustin Chen
A sanity check for OOB write is off by one leading to a false positive when the array is full. Fixes: 9b90aca97f6d ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-18net: bcmasp: Indicate MAC is in charge of PHY PMFlorian Fainelli
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The ASP driver essentially does exactly what mdio_bus_phy_resume() does. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Justin Chen <justin.chen@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-15net: bcmasp: Handle RX buffer allocation failureFlorian Fainelli
The buffer_pg variable needs to hold an order-5 allocation (32 x PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal with that error condition properly to avoid doing a NULL pointer de-reference in the subsequent call to dma_map_page(). In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs to ensure that the TX NAPI object is properly deleted, otherwise unregister_netdev() will spin forever attempting to test and clear the NAPI_STATE_HASHED bit. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Link: https://lore.kernel.org/r/20240213173339.3438713-1-florian.fainelli@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-12tg3: fix bug caused by uninitialized variableHeiner Kallweit
The reported bug is caused by using mii_eee_cap1_mod_linkmode_t() with an uninitialized bitmap. Fix this by zero-initializing the struct containing the bitmap. Fixes: 9bc791341bc9a5c22b ("tg3: convert EEE handling to use linkmode bitmaps") Reported-by: Srikanth Aithal <sraithal@amd.com> Tested-by: Srikanth Aithal <sraithal@amd.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-09bnx2x: convert EEE handling to use linkmode bitmapsHeiner Kallweit
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/948562fb-c5d8-4912-8b88-bec56238732a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Add RSS support for IPSEC headersAjit Khaparde
IPSec uses two distinct protocols, Authentication Header (AH) and Encapsulating Security Payload (ESP). Add support to configure RSS based on AH and ESP headers. This functionality will be enabled based on the capabilities indicated by the firmware in HWRM_VNIC_QCAPS. Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-14-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Invalidate user filters when neededPavan Chebbi
The cached user filters slated to be reapplied need to be cleared if configured MAC changes, RSS key changes, number of rings changes, or ntuple is disabled. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-13-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Add support for user configured RSS keyPavan Chebbi
Store the user configured or generated Toeplitz key in bp->rss_hash_key. The key stays constant across ifdown/ifup unless updated by the user. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-12-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Restore all the user created L2 and ntuple filtersPavan Chebbi
Walk the usr_fltr_list and call firmware to add these filters when we open the NIC. This will restore all user created filters after reset. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-11-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Retain user configured filters when closingPavan Chebbi
Driver should not free user created filters from its memory when closing since we are going to reconfigure them when we open again. If the "all" parameter is false, do not free user configured filters in bnxt_free_ntp_fltrs() and bnxt_free_l2_filters(). Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-10-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Save user configured filters in a lookup listPavan Chebbi
Driver needs to maintain a lookup list of all the user configured filters. This is required in order to reconfigure these filters upon interface toggle. We can look up this list to follow the order with which they should be re-applied. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-9-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Add separate function to delete the filter structurePavan Chebbi
Since we are going to do filter deletion at multiple places in the upcoming patches, add a function that does the deletion. Future patches add more code into this function. Since we are passing the address of the filter base to free the entire filter structure, add a comment to make sure that the base is always at the beginning of the structure. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-8-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Add drop action support for ntupleVikas Gupta
Add drop action for protocols TCP/UDP/ICMP 1) Drop action for TCP/UDP is supported via flow type tcp4/udp4/tcp6/udp6. 2) Drop action for ICMPV4/ICMPV6/wildcard is supported via flow type ipv4/ipv6. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Enhance ethtool ntuple support for ip flows besides TCP/UDPVikas Gupta
Enable flow type ipv4/ipv6 1) for protocols ICMPV4 and ICMPV6. 2) for wildcard match. Wildcard matches to TCP/UDP/ICMP. Note that, IPPROTO_RAW(255) i.e. a reserved protocol considered for a wildcard. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: implement fully specified 5-tuple masksEdwin Peer
Support subfield masking for IP addresses and ports. Previously, only entire fields could be included or excluded in NTUPLE filters. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20240205223202.25341-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Support ethtool -n to display ether filters.Michael Chan
Implement ETHTOOL_GRXCLSRULE for the user defined ether filters. Use the common functions to walk the L2 filter hash table. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20240205223202.25341-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Add ethtool -N support for ether filters.Michael Chan
Add ETHTOOL_SRXCLSRLINS and ETHTOOL_SRXCLSRLDEL support for inserting and deleting L2 ether filter rules. Destination MAC address and optional VLAN are supported for each filter entry. This is currently only supported on older BCM573XX and BCM574XX chips only. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240205223202.25341-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-09bnxt_en: Use firmware provided maximum filter counts.Michael Chan
While individual filter structures are allocated as needed, there is an array to keep track of the software filter IDs that we allocate ahead of time. Rather than relying on a fixed maximum filter count to allocate this array, get the maximum from the firmware when available. Move these filter related maximum counts queried from the firmware to the bnxt_hw_resc struct. If the firmware is not providing these maximum counts, fall back to the hard-coded constant. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20240205223202.25341-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-08bnxt: convert EEE handling to use linkmode bitmapsHeiner Kallweit
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. When replacing _bnxt_fw_to_ethtool_adv_spds() with _bnxt_fw_to_linkmode(), remove the fw_pause argument because it's always passed as 0. Note: There's a discussion on whether the underlying implementation is correct, but it's independent of this mechanical conversion w/o functional change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/9123bf18-a0d0-404e-a7c4-d6c466b4c5e8@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: bcmasp: remove eee_enabled/eee_active in bcmasp_get_eee()Russell King (Oracle)
bcmasp_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in bcmasp_get_eee() is redundant, and can be removed. This also makes intf->eee.eee_active unnecessary, so remove this and use a local variable where appropriate. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rWbNC-002cCt-W7@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: bcmgenet: remove eee_enabled/eee_active in bcmgenet_get_eee()Russell King (Oracle)
bcmgenet_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in bcmgenet_get_eee() is redundant, and can be removed. This also makes priv->eee.eee_active unnecessary, so remove this and use a local variable where appropriate. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rWbN7-002cCn-RO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06tg3: convert EEE handling to use linkmode bitmapsHeiner Kallweit
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Note: The change to mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val) in tg3_phy_autoneg_cfg() isn't completely obvious, but it doesn't change the current functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/0652b910-6bcc-421f-8769-38f7dae5037e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-26bnx2x: Fix firmware version string character countsKees Cook
A potential string truncation was reported in bnx2x_fill_fw_str(), when a long bp->fw_ver and a long phy_fw_ver might coexist, but seems unlikely with real-world hardware. Use scnprintf() to indicate the intent that truncations are tolerated. While reading this code, I found a collection of various buffer size counting issues. None looked like they might lead to a buffer overflow with current code (the small buffers are 20 bytes and might only ever consume 10 bytes twice with a trailing %NUL). However, early truncation (due to a %NUL in the middle of the string) might be happening under likely rare conditions. Regardless fix the formatters and related functions: - Switch from a separate strscpy() to just adding an additional "%s" to the format string that immediately follows it in bnx2x_fill_fw_str(). - Use sizeof() universally instead of using unbound defines. - Fix bnx2x_7101_format_ver() and bnx2x_null_format_ver() to report the number of characters written, not including the trailing %NUL (as already done with the other firmware formatting functions). - Require space for at least 1 byte in bnx2x_get_ext_phy_fw_version() for the trailing %NUL. - Correct the needed buffer size in bnx2x_3_seq_format_ver(). Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401260858.jZN6vD1k-lkp@intel.com/ Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20240126041044.work.220-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26bnxt_en: Make PTP timestamp HWRM more silentBreno Leitao
commit 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent") changed a netdev_err() to netdev_WARN_ONCE(). netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for the following reasons: * You do not a kernel warning if the firmware queries are late * In busy networks, timestamp query failures fairly regularly * A WARNING message doesn't bring much value, since the code path is clear. (This was discussed in-depth in [1]) Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a more well-behaved message, instead of a full WARN(). bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5 [1] Link: https://lore.kernel.org/all/ZbDj%2FFI4EJezcfd1@gmail.com/ Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Fixes: 056bce63c469 ("bnxt_en: Make PTP TX timestamp HWRM query silent") Link: https://lore.kernel.org/r/20240125134104.2045573-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24net: fill in MODULE_DESCRIPTION()s for Broadcom bgmacBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom iProc GBit driver. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240123190332.677489-3-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-29 15:16:33 +0000