summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2021-10-29bnxt_en: remove fw_reset devlink health reporterEdwin Peer
Firmware resets initiated by the user are not errors and should not be reported via devlink. Once only unsolicited resets remain, it is no longer sensible to maintain a separate fw_reset reporter. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: improve error recovery information messagesEdwin Peer
The recovery election messages are often mistaken for errors. Improve the wording to clarify the meaning of these frequent and expected events. Also, take the first step towards more inclusive language. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: add enable_remote_dev_reset devlink parameterEdwin Peer
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload driver_reinitEdwin Peer
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-Off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor cancellation of resource reservationsEdwin Peer
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor printing of device infoEdwin Peer
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19ethernet: Remove redundant statementluo penghao
The variable will be assigned again later in the if condition, there is no meaning there. drivers/net/ethernet/broadcom/tg3.c:5750:2 warning: Value stored to 'current_link_up' is never read. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bcmgenet: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bnx2x: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-10bnxt: use netif_is_rxfh_configured instead of open codeJuhee Kang
The open code which is dev->priv_flags & IFF_RXFH_CONFIGURED is defined as a helper function on netdevice.h. So use netif_is_rxfh_configured() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09ethernet: tg3: remove direct netdev->dev_addr writesJakub Kicinski
tg3 does various forms of direct writes to netdev->dev_addr. Use a local buffer. Make sure local buffer is aligned since eth_platform_get_mac_address() may call ether_addr_copy(). tg3_get_device_address() returns whenever it finds a method that found a valid address. Instead of modifying all the exit points pass the buffer from the outside and commit the address in the caller. Constify the argument of the set addr helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: tg3: fix redundant check of true expressionJean Sacren
Remove the redundant check of (tg3_asic_rev(tp) == ASIC_REV_5705) after it is checked to be true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20211008063147.1421-1-sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07net: broadcom: bcm4908_enet: use kcalloc() instead of kzalloc()Gustavo A. R. Silva
Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20211006180843.GA913399@embeddedor Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use device_get_ethdev_address()Jakub Kicinski
Use the new device_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - device_get_mac_address(np, dev->dev_addr, ETH_ALEN) + device_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06net: tg3: fix obsolete check of !errJean Sacren
The err variable is checked for true or false a few lines above. When !err is checked again, it always evaluates to true. Therefore we should skip this check. We should also group the adjacent statements together for readability. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bgmac: support MDIO described in DTRafał Miłecki
Check ethernet controller DT node for "mdio" subnode and use it with of_mdiobus_register() when present. That allows specifying MDIO and its PHY devices in a standard DT based way. This is required for BCM53573 SoC support. That family is sometimes called Northstar (by marketing?) but is quite different from it. It uses different CPU(s) and many different hw blocks. One of shared blocks in BCM53573 is Ethernet controller. Switch however is not SRAB accessible (as it Northstar) but is MDIO attached. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bgmac: improve handling PHYRafał Miłecki
1. Use info from DT if available It allows describing for example a fixed link. It's more accurate than just guessing there may be one (depending on a chipset). 2. Verify PHY ID before trying to connect PHY PHY addr 0x1e (30) is special in Broadcom routers and means a switch connected as MDIO devices instead of a real PHY. Don't try connecting to it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-27net: bcmgenet: add support for ethtool flow controlDoug Berger
This commit extends the supported ethtool operations to allow MAC level flow control to be configured for the bcmgenet driver. The ethtool utility can be used to change the configuration of auto-negotiated symmetric and asymmetric modes as well as manually configuring support for RX and TX Pause frames individually. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: pull mac_config from adjust_linkDoug Berger
This commit separates out the MAC configuration that occurs on a PHY state change into a function named bcmgenet_mac_config(). This allows the function to be called directly elsewhere. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: remove old link state valuesDoug Berger
The PHY state machine has been fixed to only call the adjust_link callback when the link state has changed. Therefore the old link state variables are no longer needed to detect a change in link state. This commit effectively reverts commit 5ad6e6c50899 ("net: bcmgenet: improve bcmgenet_mii_setup()") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bcmgenet: remove netif_carrier_off from adjust_linkDoug Berger
The bcmgenet_mii_setup() function is registered as the adjust_link callback from the phylib for the GENET driver. The phylib always sets the netif_carrier according to phydev->link prior to invoking the adjust_link callback, so there is no need to repeat that in the link down case within the network driver. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27bnxt_en: Register devlink instance at the end devlink configurationLeon Romanovsky
Move devlink_register() to be last command in devlink configuration sequence, so no user space access will be possible till devlink instance is fully operable. As part of this change, the devlink_params_publish call is removed as not needed. This change fixes forgotten devlink_params_unpublish() too. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: broadcom: Fix a function name in commentsCai Huoqing
Use dma_alloc_coherent() instead of pci_alloc_consistent(), because only dma_alloc_coherent() is called here. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: bgmac-platform: handle mac-address deferralMatthew Hagan
This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-25bnxt_en: Use struct_group_attr() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() around members queue_id, min_bw, max_bw, tsa, pri_lvl, and bw_weight so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of queue_id. "pahole" shows no size nor member offset changes to struct bnxt_cos2bw_cfg. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/lkml/CACKFLinDc6Y+P8eZ=450yA1nMC7swTURLtcdyiNR=9J6dfFyBg@mail.gmail.com Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/20210728044517.GE35706@embeddedor
2021-09-24bnxt_en: Properly remove port parameter supportLeon Romanovsky
This driver doesn't have any port parameters and registers devlink port parameters with empty table. Remove the useless calls to devlink_port_params_register and _unregister. Fixes: da203dfa89ce ("Revert "devlink: Add a generic wake_on_lan port parameter"") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24bnxt_en: Check devlink allocation and registration statusLeon Romanovsky
devlink is a software interface that doesn't depend on any hardware capabilities. The failure in SW means memory issues, wrong parameters, programmer error e.t.c. Like any other such interface in the kernel, the returned status of devlink APIs should be checked and propagated further and not ignored. Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21net: bcmgenet: Request APD, DLL disable and IDDQ-SRFlorian Fainelli
When interfacing with a Broadcom PHY, request the auto-power down, DLL disable and IDDQ-SR modes to be enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20bnxt_en: Fix TX timeout when TX ring size is set to the smallestMichael Chan
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: bgmac-bcma: handle deferred probe error due to mac-addressChristian Lamparter
Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar <ynezz@true.cz> Cc: Michael Walle <michael@walle.cc> Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18net: bcmgenet: Patch PHY interface for dedicated PHY driverFlorian Fainelli
When we are using a dedicated PHY driver (not the Generic PHY driver) chances are that it is going to configure RGMII delays and do that in a way that is incompatible with our incorrect interpretation of the phy_interface value. Add a quirk in order to reverse the PHY_INTERFACE_MODE_RGMII to the value of PHY_INTERFACE_MODE_RGMII_ID such that the MAC continues to be configured the way it used to be, but the PHY driver can account for adding delays. Conversely when PHY_INTERFACE_MODE_RGMII_TXID is specified, return PHY_INTERFACE_MODE_RGMII_RXID to the PHY since we will have enabled a TXC MAC delay (id_mode_dis=0, meaning there is a delay inserted). This is not considered a bug fix at this point since it only affects Broadcom STB platforms shipping with a Device Tree blob that is not updatable in the field (quite a few devices out there) and which was generated using the scripted Device Tree environment shipped with those platforms' SDK. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-16net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assertEli Cohen
Remove the assert from the callback priv lookup function since it does not require RTNL lock and is already protected by flow_indr_block_lock. This will avoid warnings from being emitted to dmesg if the driver registers its callback after an ingress qdisc was created for a netdevice. The warnings started after the following patch was merged: commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14bnx2x: Fix enabling network interfaces without VFsAdrian Bunk
This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk <bunk@kernel.org> Reported-by: YunQiang Su <wzssyqa@gmail.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Cc: stable@vger.kernel.org Acked-by: Shai Malin <smalin@marvell.com> Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-13bnxt_en: Clean up completion ring page arrays completelyMichael Chan
We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c7448790b8 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: make bnxt_free_skbs() safe to call after bnxt_free_mem()Edwin Peer
The call to bnxt_free_mem(..., false) in the bnxt_half_open_nic() error path will deallocate ring descriptor memory via bnxt_free_?x_rings(), but because irq_re_init is false, the ring info itself is not freed. To simplify error paths, deallocation functions have generally been written to be safe when called on unallocated memory. It should always be safe to call dev_close(), which calls bnxt_free_skbs() a second time, even in this semi- allocated ring state. Calling bnxt_free_skbs() a second time with the rings already freed will cause NULL pointer dereference. Fix it by checking the rings are valid before proceeding in bnxt_free_tx_skbs() and bnxt_free_one_rx_ring_skbs(). Fixes: 975bc99a4a39 ("bnxt_en: Refactor bnxt_free_rx_skbs().") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: Fix error recovery regressionMichael Chan
The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b91831983 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
generated by cgit (git 2.34.1) at 2025-10-03 11:13:14 +0000