summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2021-12-16net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli
The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-13net: bcmgenet: Fix NULL vs IS_ERR() checkingMiaoqian Lin
The phy_attach() function does not return NULL. It returns error pointers. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang
The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16bnxt_en: Fix compile error regression when CONFIG_BNXT_SRIOV is not setMichael Chan
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix it by adding a helper function bnxt_sriov_cfg() to handle the logic with or without the config option. Fixes: 46d08f55d24e ("bnxt_en: extend RTNL to VF check in devlink driver_reinit") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-15bnxt_en: reject indirect blk offload when hw-tc-offload is offSriharsha Basavapatna
The driver does not check if hw-tc-offload is enabled for the device before offloading a flow in the context of indirect block callback. Fix this by checking NETIF_F_HW_TC in the features flag and rejecting the offload request. This will avoid unnecessary dmesg error logs when hw-tc-offload is disabled, such as these: bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15bnxt_en: fix format specifier in live patch error messageEdwin Peer
This fixes type mismatch warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15bnxt_en: extend RTNL to VF check in devlink driver_reinitEdwin Peer
The fixes the race condition between configuring SR-IOV and devlink reload. The SR-IOV configure logic already takes the RTNL lock, setting sriov_cfg under the lock while changes are underway. Extend the lock scope in devlink driver_reinit to cover the VF check and don't run concurrently with SR-IOV configure. Reported-by: Leon Romanovsky <leon@kernel.org> Fixes: 228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit") Cc: Leon Romanovsky <leon@kernel.org> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: bnx2x: fix variable dereferenced before checkPavel Skripkin
Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05tg3: Remove redundant assignmentsluo penghao
The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-02bnxt_en: avoid newline at end of message in NL_SET_ERR_MSG_MODWan Jiabing
Fix following coccicheck warning: ./drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:446:8-56: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211102020312.16567-1-wanjiabing@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-11-01Merge tag 'overflow-v5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "The end goal of the current buffer overflow detection work[0] is to gain full compile-time and run-time coverage of all detectable buffer overflows seen via array indexing or memcpy(), memmove(), and memset(). The str*() family of functions already have full coverage. While much of the work for these changes have been on-going for many releases (i.e. 0-element and 1-element array replacements, as well as avoiding false positives and fixing discovered overflows[1]), this series contains the foundational elements of several related buffer overflow detection improvements by providing new common helpers and FORTIFY_SOURCE changes needed to gain the introspection required for compiler visibility into array sizes. Also included are a handful of already Acked instances using the helpers (or related clean-ups), with many more waiting at the ready to be taken via subsystem-specific trees[2]. The new helpers are: - struct_group() for gaining struct member range introspection - memset_after() and memset_startat() for clearing to the end of structures - DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs Also included is the beginning of the refactoring of FORTIFY_SOURCE to support memcpy() introspection, fix missing and regressed coverage under GCC, and to prepare to fix the currently broken Clang support. Finishing this work is part of the larger series[0], but depends on all the false positives and buffer overflow bug fixes to have landed already and those that depend on this series to land. As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time and run-time tests are added for FORTIFY_SOURCE and the mem*()-family functions respectively. The compile time tests have found a legitimate (though corner-case) bug[6] already. Please note that the appearance of "panic" and "BUG" in the FORTIFY_SOURCE refactoring are the result of relocating existing code, and no new use of those code-paths are expected nor desired. Finally, there are two tree-wide conversions for 0-element arrays and flexible array unions to gain sane compiler introspection coverage that result in no known object code differences. After this series (and the changes that have now landed via netdev and usb), we are very close to finally being able to build with -Warray-bounds and -Wzero-length-bounds. However, due corner cases in GCC[3] and Clang[4], I have not included the last two patches that turn on these options, as I don't want to introduce any known warnings to the build. Hopefully these can be solved soon" Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1] Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2] Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3] Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4] Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5] Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6] * tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) fortify: strlen: Avoid shadowing previous locals compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer treewide: Replace 0-element memcpy() destinations with flexible arrays treewide: Replace open-coded flex arrays in unions stddef: Introduce DECLARE_FLEX_ARRAY() helper btrfs: Use memset_startat() to clear end of struct string.h: Introduce memset_startat() for wiping trailing members and padding xfrm: Use memset_after() to clear padding string.h: Introduce memset_after() for wiping trailing members/padding lib: Introduce CONFIG_MEMCPY_KUNIT_TEST fortify: Add compile-time FORTIFY_SOURCE tests fortify: Allow strlen() and strnlen() to pass compile-time known lengths fortify: Prepare to improve strnlen() and strlen() warnings fortify: Fix dropped strcpy() compile-time write overflow check fortify: Explicitly disable Clang support fortify: Move remaining fortify helpers into fortify-string.h lib/string: Move helper functions out of string.c compiler_types.h: Remove __compiletime_object_size() cm4000_cs: Use struct_group() to zero struct cm4000_dev region can: flexcan: Use struct_group() to zero struct flexcan_regs regions ...
2021-10-29bnxt_en: Remove not used other ULP defineLeon Romanovsky
There is only one bnxt ULP in the upstream kernel and definition for other ULP can be safely removed. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/3a8ea720b28ec4574648012d2a00208f1144eff5.1635527693.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29bnxt_en: Provide stored devlink "fw" version on older firmwareVikas Gupta
On older firmware that doesn't support the HWRM_NVM_GET_DEV_INFO command that returns detailed stored firmware versions, fallback to use the same firmware package version that is reported to ethtool. Refactor bnxt_get_pkgver() in bnxt_ethtool.c so that devlink can call and get the package version. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement firmware live patchingEdwin Peer
Live patches are activated by using the 'limit no_reset' option when performing a devlink dev reload fw_activate operation. These packages must first be installed on the device in the usual way. For example, via devlink dev flash or ethtool -f. The devlink device info has also been enhanced to render stored and running live patch versions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Update firmware interface to 1.10.2.63Michael Chan
The main changes are firmware live patch support and 2 additional FEC standard counters. Add the matching FEC counters to ethtool counter array. Firmware older than 220 does not return the proper size of the extended RX counters so we need to cap it at the smaller legacy size. Otherwise the new FEC counters may show up with garbage values. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement dump callback for fw health reporterEdwin Peer
Populate the dump with firmware 'live' coredump data. This includes the information stored in NVRAM by the firmware exception handler prior to recovery. Thus, the live dump includes the desired crash context. Firmware does not support HWRM calls after RESET_NOTIFY, so there is no supported way to capture a coredump during the auto dump phase. Detect this and abort when called from devlink_health_report(). Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: extract coredump command line from current taskEdwin Peer
Tools other than 'ethtool -w' may be used to produce a coredump. For devlink health, such dumps could even be driver initiated in response to a health event. In these cases, the kernel thread information will be placed in the coredump record instead. v2: use min_t() instead of min() to fix the mismatched type warning Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Retrieve coredump and crashdump size via FW commandVasundhara Volam
Recent firmware provides coredump and crashdump size info via DBG_QCFG command. Read the dump sizes from firmware, instead of computing in the driver. This patch reduces the time taken to collect the dump via ethtool. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Add compression flags information in coredump segment headerVasundhara Volam
Firmware sets compression flags for each segment, add this information while filling segment header. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: move coredump functions into dedicated fileEdwin Peer
Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: Refactor coredump functionsEdwin Peer
The coredump functionality will be used by devlink health. Refactor these functions that get coredump and coredump length. There is no functional change, but the following checkpatch warnings were addressed: - strscpy is preferred over strlcpy. - sscanf results should be checked, with an additional warning. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: improve fw diagnose devlink health messagesEdwin Peer
Add firmware event counters as well as health state severity. In the unhealthy state, recommend a remedy and inform the user as to its impact. Readability of the devlink tool's output is negatively impacted by adding these fields to the diagnosis. The single line of text, as rendered by devlink health diagnose, benefits from more terse descriptions, which can be substituted without loss of clarity, even in pretty printed JSON mode. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: consolidate fw devlink health reportersEdwin Peer
Merge 'fw' and 'fw_fatal' health reporters. There is no longer a need to distinguish between firmware reporters. Only bonafide errors are reported now and no reports were being generated for the 'fw' reporter. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: remove fw_reset devlink health reporterEdwin Peer
Firmware resets initiated by the user are not errors and should not be reported via devlink. Once only unsolicited resets remain, it is no longer sensible to maintain a separate fw_reset reporter. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: improve error recovery information messagesEdwin Peer
The recovery election messages are often mistaken for errors. Improve the wording to clarify the meaning of these frequent and expected events. Also, take the first step towards more inclusive language. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: add enable_remote_dev_reset devlink parameterEdwin Peer
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: implement devlink dev reload driver_reinitEdwin Peer
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-Off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor cancellation of resource reservationsEdwin Peer
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-29bnxt_en: refactor printing of device infoEdwin Peer
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bcmgenet: Add support for 7712 16nm internal EPHYFlorian Fainelli
The 16nm internal EPHY that is present in 7712 is actually a 16nm Gigabit PHY which has been forced to operate in 10/100 mode. Its controls are therefore via the EXT_GPHY_CTRL registers and not via the EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on the 7712 compatible string to allow that differentiation to happen. On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by default, but this is not the case with this chip, so we need to make sure we clear it to power on the EPHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19ethernet: Remove redundant statementluo penghao
The variable will be assigned again later in the if condition, there is no meaning there. drivers/net/ethernet/broadcom/tg3.c:5750:2 warning: Value stored to 'current_link_up' is never read. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bcmgenet: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: bnx2x: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-10bnxt: use netif_is_rxfh_configured instead of open codeJuhee Kang
The open code which is dev->priv_flags & IFF_RXFH_CONFIGURED is defined as a helper function on netdevice.h. So use netif_is_rxfh_configured() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09ethernet: tg3: remove direct netdev->dev_addr writesJakub Kicinski
tg3 does various forms of direct writes to netdev->dev_addr. Use a local buffer. Make sure local buffer is aligned since eth_platform_get_mac_address() may call ether_addr_copy(). tg3_get_device_address() returns whenever it finds a method that found a valid address. Instead of modifying all the exit points pass the buffer from the outside and commit the address in the caller. Constify the argument of the set addr helper. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08net: tg3: fix redundant check of true expressionJean Sacren
Remove the redundant check of (tg3_asic_rev(tp) == ASIC_REV_5705) after it is checked to be true. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20211008063147.1421-1-sakiwit@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07net: broadcom: bcm4908_enet: use kcalloc() instead of kzalloc()Gustavo A. R. Silva
Use 2-factor multiplication argument form kcalloc() instead of kzalloc(). Link: https://github.com/KSPP/linux/issues/162 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20211006180843.GA913399@embeddedor Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use device_get_ethdev_address()Jakub Kicinski
Use the new device_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - device_get_mac_address(np, dev->dev_addr, ETH_ALEN) + device_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-06net: tg3: fix obsolete check of !errJean Sacren
The err variable is checked for true or false a few lines above. When !err is checked again, it always evaluates to true. Therefore we should skip this check. We should also group the adjacent statements together for readability. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bgmac: support MDIO described in DTRafał Miłecki
Check ethernet controller DT node for "mdio" subnode and use it with of_mdiobus_register() when present. That allows specifying MDIO and its PHY devices in a standard DT based way. This is required for BCM53573 SoC support. That family is sometimes called Northstar (by marketing?) but is quite different from it. It uses different CPU(s) and many different hw blocks. One of shared blocks in BCM53573 is Ethernet controller. Switch however is not SRAB accessible (as it Northstar) but is MDIO attached. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05net: bgmac: improve handling PHYRafał Miłecki
1. Use info from DT if available It allows describing for example a fixed link. It's more accurate than just guessing there may be one (depending on a chipset). 2. Verify PHY ID before trying to connect PHY PHY addr 0x1e (30) is special in Broadcom routers and means a switch connected as MDIO devices instead of a real PHY. Don't try connecting to it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-06 09:40:36 +0000