summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2021-05-19net: broadcom: remove leading spaces before tabsHui Tang
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: broadcom: bnx2x: Fix wrong function name in commentsYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:13595: warning: expecting prototype for bnx2x_get_num_none_def_sbs(). Prototype was for bnx2x_get_num_non_def_sbs() instead drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4165: warning: expecting prototype for atomic_add_ifless(). Prototype was for __atomic_add_ifless() instead drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c:4193: warning: expecting prototype for atomic_dec_ifmoe(). Prototype was for __atomic_dec_ifmoe() instead Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: GR-everest-linux-l2@marvell.com Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-08Merge tag 'net-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ...
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...
2021-04-30PCI/VPD: Remove pci_vpd_find_tag() 'offset' argumentHeiner Kallweit
All callers pass 0 as offset. Therefore remove the parameter and use a fixed offset 0 in pci_vpd_find_tag(). Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29bnx2x: Remove redundant assignment to errYang Li
Variable 'err' is set to -EIO but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-04-25bnxt_en: Implement .ndo_features_check().Michael Chan
For UDP encapsultions, we only support the offloaded Vxlan port and Geneve port. All other ports included FOU and GUE are not supported so we need to turn off TSO and checksum features. v2: Reverse the check for supported UDP ports to be more straight forward. Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Support IFF_SUPP_NOFCS feature to transmit without ethernet FCS.Michael Chan
If firmware is capable, set the IFF_SUPP_NOFCS flag to support the sockets option to transmit packets without FCS. This is mainly used for testing. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Add PCI IDs for Hyper-V VF devices.Michael Chan
Support VF device IDs used by the Hyper-V hypervisor. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Call bnxt_approve_mac() after the PF gives up control of the VF MAC.Michael Chan
When the PF is no longer enforcing an assigned MAC address on a VF, the VF needs to call bnxt_approve_mac() to tell the PF what MAC address it is now using. Otherwise it gets out of sync and the PF won't know what MAC address the VF wants to use. Ultimately the VF will fail when it tries to setup the L2 MAC filter for the vnic. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Move bnxt_approve_mac().Michael Chan
Move it before bnxt_update_vf_mac(). In the next patch, we need to call bnxt_approve_mac() from bnxt_update_mac() under some conditions. This will avoid forward declaration. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: allow VF config ops when PF is closedEdwin Peer
It is perfectly legal for the stack to query and configure VFs via PF NDOs while the NIC is administratively down. Remove the unnecessary check for the PF to be in open state. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: allow promiscuous mode for trusted VFsEdwin Peer
Firmware previously only allowed promiscuous mode for VFs associated with a default VLAN. It is now possible to enable promiscuous mode for a VF having no VLAN configured provided that it is trusted. In such cases the VF will see all packets received by the PF, irrespective of destination MAC or VLAN. Note, it is necessary to query firmware at the time of bnxt_promisc_ok() instead of in bnxt_hwrm_func_qcfg() because the trusted status might be altered by the PF after the VF has been configured. This check must now also be deferred because the firmware call sleeps. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Add support for fw managed link down feature.Michael Chan
In the current code, the driver will not shutdown the link during IFDOWN if there are still VFs sharing the port. Newer firmware will manage the link down decision when the port is shared by VFs, so we can just call firmware to shutdown the port unconditionally and let firmware make the final decision. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Add a new phy_flags field to the main driver structure.Michael Chan
Copy the phy related feature flags from the firmware call HWRM_PORT_PHY_QCAPS to this new field. We can also remove the flags field in the bnxt_test_info structure. It's cleaner to have all PHY related flags in one location, directly copied from the firmware. To keep the BNXT_PHY_CFG_ABLE() macro logic the same, we need to make a slight adjustment to check that it is a PF. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: report signal mode in link up messagesEdwin Peer
Firmware reports link signalling mode for certain speeds. In these cases, print the signalling modes in kernel log link up messages. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25bnxt_en: Fix RX consumer index logic in the error path.Michael Chan
In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e684e9 ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-22bnxt_en: fix ternary sign extension bug in bnxt_show_temp()Dan Carpenter
The problem is that bnxt_show_temp() returns long but "rc" is an int and "len" is a u32. With ternary operations the type promotion is quite tricky. The negative "rc" is first promoted to u32 and then to long so it ends up being a high positive value instead of a a negative as we intended. Fix this by removing the ternary. Fixes: d69753fa1ecb ("bnxt_en: return proper error codes in bnxt_show_temp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19bnxt: add more ethtool standard statsJakub Kicinski
Michael suggest a few more stats we can expose. $ ethtool -S eth0 --groups eth-mac Standard stats for eth0: eth-mac-FramesTransmittedOK: 902623288966 eth-mac-FramesReceivedOK: 28727667047 eth-mac-FrameCheckSequenceErrors: 1 eth-mac-AlignmentErrors: 0 eth-mac-OutOfRangeLengthField: 0 $ ethtool -S eth0 | grep '\(fcs\|align\|oor\)' rx_fcs_err_frames: 1 rx_align_err_frames: 0 tx_fcs_err_frames: 0 Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19RDMA/bnxt_re: Create direct symbol link between bnxt modulesLeon Romanovsky
Convert indirect probe call to its direct equivalent to create a symbol link between RDMA and netdev modules. This will give us an ability to remove custom module reference counting that doesn't belong to the driver. Link: https://lore.kernel.org/r/20210401065715.565226-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-16bnxt: implement ethtool standard statsJakub Kicinski
Most of the names seem to strongly correlate with names from the standard and RFC. Whether ..+good_frames are indeed Frames..OK I'm the least sure of. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-15bnxt: implement ethtool::get_fec_statsJakub Kicinski
Report corrected bits. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Free and allocate VF-Reps during error recovery.Sriharsha Basavapatna
During firmware recovery, VF-Rep configuration in the firmware is lost. Fix it by freeing and (re)allocating VF-Reps in FW at relevant points during the error recovery process. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Refactor __bnxt_vf_reps_destroy().Michael Chan
Add a new helper function __bnxt_free_one_vf_rep() to free one VF rep. We also reintialize the VF rep fields to proper initial values so that the function can be used without freeing the VF rep data structure. This will be used in subsequent patches to free and recreate VF reps after error recovery. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Refactor bnxt_vf_reps_create().Sriharsha Basavapatna
Add a new function bnxt_alloc_vf_rep() to allocate a VF representor. This function will be needed in subsequent patches to recreate the VF reps after error recovery. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Invalidate health register mapping at the end of probe.Vasundhara Volam
After probe is successful, interface may not be bought up in all the cases and health register mapping could be invalid if firmware undergoes reset. Fix it by invalidating the health register at the end of probe. It will be remapped during ifup. Fixes: 43a440c4007b ("bnxt_en: Improve the status_reliable flag in bp->fw_health.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12bnxt_en: Treat health register value 0 as valid in bnxt_try_reover_fw().Michael Chan
The retry loop in bnxt_try_recover_fw() should not abort when the health register value is 0. It is a valid value that indicates the firmware is booting up. Fixes: 861aae786f2f ("bnxt_en: Enhance retry of the first message to the firmware.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-06net: broadcom: bcm4908enet: Fix a double free in bcm4908_enet_dma_allocLv Yunlong
In bcm4908_enet_dma_alloc, if callee bcm4908_dma_alloc_buf_descs() failed, it will free the ring->cpu_addr by dma_free_coherent() and return error. Then bcm4908_enet_dma_free() will be called, and free the same cpu_addr by dma_free_coherent() again. My patch set ring->cpu_addr to NULL after it is freed in bcm4908_dma_alloc_buf_descs() to avoid the double free. Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25net: bcmgenet: remove unused including <linux/version.h>Zheng Yongjun
Remove including <linux/version.h> that don't need it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: Enhance retry of the first message to the firmware.Michael Chan
Two enhancements: 1. Read the health status first before sending the first HWRM_VER_GET message to firmware instead of the other way around. This guarantees we got the accurate health status before we attempt to send the message. 2. We currently only retry sending the first HWRM_VER_GET message to the firmware if the firmware is in the process of booting. If the firmware is in error state and is doing core dump for example, the driver should also retry if the health register has the RECOVERING flag set. This flag indicates the firmware will undergo recovery soon. Modify the retry logic to retry for this case as well. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: Remove the read of BNXT_FW_RESET_INPROG_REG after firmware reset.Vasundhara Volam
Once the chip goes through reset, the register mapping may be lost and any read of the mapped health registers may return garbage value until the registers are mapped again in the init path. Reading BNXT_FW_RESET_INPROG_REG after firmware reset will likely return garbage value due to the above reason. Reading this register is for information purpose only so remove it. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: Set BNXT_STATE_FW_RESET_DET flag earlier for the RDMA driver.Michael Chan
During ifup, if the driver detects that firmware has gone through a reset, it will go through a re-probe sequence. If the RDMA driver is loaded, the re-probe sequence includes calling the RDMA driver to stop. We need to set the BNXT_STATE_FW_RESET_DET flag earlier so that it is visible to the RDMA driver. The RDMA driver's stop sequence is different if firmware has gone through a reset. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: P B S Naresh Kumar <nareshkumar.pbs@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: check return value of bnxt_hwrm_func_resc_qcapsScott Branden
Check return value of call to bnxt_hwrm_func_resc_qcaps in bnxt_hwrm_if_change and return failure on error. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: don't fake firmware response success when PCI is disabledEdwin Peer
The original intent here is to allow commands during reset to succeed without error when the device is disabled, to ensure that cleanup completes normally during NIC close, where firmware is not necessarily expected to respond. The problem with faking success during reset's PCI disablement is that unrelated ULP commands will also see inadvertent success during reset when failure would otherwise be appropriate. It is better to return a different error result such that reset related code can detect this unique condition and ignore as appropriate. Note, the pci_disable_device() when firmware is fatally wounded in bnxt_fw_reset_close() does not need to be addressed, as subsequent commands are already expected to fail due to the BNXT_NO_FW_ACCESS() check in bnxt_hwrm_do_send_msg(). Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: Improve wait for firmware commands completionPavan Chebbi
In situations where FW has crashed, the bnxt_hwrm_do_send_msg() call will have to wait until timeout for each firmware message. This generally takes about half a second for each firmware message. If we try to unload the driver n this state, the unload sequence will take a long time to complete. Improve this by checking the health register if it is available and abort the wait for the firmware response if the register shows that firmware is not healthy. The very first message HWRM_VER_GET is excluded from this check because that message is used to poll for firmware to come out of reset during error recovery. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-22bnxt_en: Improve the status_reliable flag in bp->fw_health.Michael Chan
In order to read the firmware health status, we first need to determine the register location and then the register may need to be mapped. There are 2 code paths to do this. The first one is done early as a best effort attempt by the function bnxt_try_map_fw_health_reg(). The second one is done later in the function bnxt_map_fw_health_regs() after establishing communications with the firmware. We currently only set fw_health->status_reliable if we can successfully set up the health register in the first code path. Improve the scheme by setting the fw_health->status_reliable flag if either (or both) code paths can successfully set up the health register. This flag is relied upon during run-time when we need to check the health status. So this will make it work better. During ifdown, if the health register is mapped, we need to invalidate the health register mapping because a potential fw reset will reset the mapping. Similarly, we need to do the same after firmware reset during recovery. We'll remap it during ifup. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-03-17ethernet/broadcom:remove unneeded variable: "ret"dingsenjie
remove unneeded variable: "ret". Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net: broadcom: BCM4908_ENET should not default to y, unconditionallyGeert Uytterhoeven
Merely enabling compile-testing should not enable additional code. To fix this, restrict the automatic enabling of BCM4908_ENET to ARCH_BCM4908. Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12net: broadcom: bcm4908_enet: support TX interruptRafał Miłecki
It appears that each DMA channel has its own interrupt and both rings can be configured (the same way) to handle interrupts. 1. Make ring interrupts code generic (make it operate on given ring) 2. Move napi to ring (so each has its own) 3. Make IRQ handler generic (match ring against received IRQ number) 4. Add (optional) support for TX interrupt Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10net: broadcom: bcm4908_enet: read MAC from OFRafał Miłecki
BCM4908 devices have MAC address accessible using NVMEM so it's needed to use OF helper for reading it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-28net: broadcom: bcm4908_enet: enable RX after processing packetsRafał Miłecki
When receiving a lot of packets hardware may run out of free descriptiors and stop RX ring. Enable it every time after handling received packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26bnxt_en: reliably allocate IRQ table on reset to avoid crashEdwin Peer
The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-26bnxt_en: Fix race between firmware reset and driver remove.Vasundhara Volam
The driver's error recovery reset sequence can take many seconds to complete and only the critical sections are protected by rtnl_lock. A recent change has introduced a regression in this sequence. bnxt_remove_one() may be called while the recovery is in progress. Normally, unregister_netdev() would cause bnxt_close_nic() to be called and this would cause the error recovery to safely abort with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic(). Recently, we added bnxt_reinit_after_abort() to allow the user to reopen the device after an aborted recovery. This causes the regression in the scenario described above because we would attempt to re-open even after the netdev has been unregistered. Fix it by checking the netdev reg_state in bnxt_reinit_after_abort() and abort if it is unregistered. Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-07-02 17:42:07 +0000