summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cavium
AgeCommit message (Collapse)Author
2024-11-26Merge tag 'pci-v6.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent callers can't stop a device multiple times, even as we migrate from the global pci_rescan_remove_lock to finer-grained locking (Keith Busch) - Improve pci_walk_bus() implementation by making it recursive and moving locking up to avoid need for a 'locked' parameter (Keith Busch) - Unexport pci_walk_bus_locked(), which is only used internally by the PCI core (Keith Busch) - Detect some Thunderbolt chips that are built-in and hence 'trustworthy' by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface' ACPI properties are not quite enough (Esther Shimanovich) Resource management: - Use PCI bus addresses (not CPU addresses) in 'ranges' properties when building dynamic DT nodes so systems where PCI and CPU addresses differ work correctly (Andrea della Porta) - Tidy resource sizing and assignment with helpers to reduce redundancy (Ilpo Järvinen) - Improve pdev_sort_resources() 'bogus alignment' warning to be more specific (Ilpo Järvinen) Driver binding: - Convert driver .remove_new() callbacks to .remove() again to finish the conversion from returning 'int' to being 'void' (Sergio Paracuellos) - Export pcim_request_all_regions(), a managed interface to request all BARs (Philipp Stanner) - Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(), and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212 (Philipp Stanner) - Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner) - Export pcim_iounmap_region(), a managed interface to unmap and release a PCI BAR (Philipp Stanner) - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp Stanner) Error handling: - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a bridge; previously Secondary Bus Reset could only be used when there was a single device below a bridge (Keith Busch) - Warn if we reset a running device where the driver didn't register pci_error_handlers notification callbacks (Keith Busch) ASPM: - Disable ASPM L1 before touching L1 PM Substates to follow the spec closer and avoid a CPU load timeout on some platforms (Ajay Agarwal) - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates as required per spec for all L1 Substates changes (Jian-Hong Pan) Power management: - Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) Power control: - Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller ('bwctrl') and hotplug files (Bjorn Helgaas) Bandwidth control: - Add read/modify/write locking for Link Control 2, which is used to manage Link speed (Ilpo Järvinen) - Extract Link Bandwidth Management Status check into pcie_lbms_seen(), where it can be shared between the bandwidth controller and quirks that use it to help retrain failed links (Ilpo Järvinen) - Re-add Link Bandwidth notification support with updates to address the reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen) - Add pcie_set_target_speed() and related functionality so drivers can manage PCIe Link speed based on thermal or other constraints (Ilpo Järvinen) - Add a thermal cooling driver to throttle PCIe Links via the existing thermal management framework (Ilpo Järvinen) - Add a userspace selftest for the PCIe bandwidth controller (Ilpo Järvinen) PCI device hotplug: - Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) - Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid a use-after-free when the thunderbolt driver resets USB4 host routers on boot, causing hotplug remove/add of downstream docks or other devices (Lukas Wunner) - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test (Guilherme Giacomo Simoes) - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET) - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection in cpqphp (Ilpo Järvinen) - Simplify cpqphp enumeration, which is already simple-minded and doesn't handle devices below hot-added bridges (Ilpo Järvinen) Virtualization: - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR were set, so the functions can be in independent IOMMU groups (Mengyuan Lou) TLP Processing Hints (TPH): - Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to improve performance by directing DMA writes closer to their consumers (Wei Huang) Data Object Exchange (DOE): - Wait up to 1 second for DOE Busy bit to clear before writing a request to the mailbox to avoid failures if the mailbox is still busy from a previous transfer (Gregory Price) Endpoint framework: - Skip attempts to allocate from endpoint controller memory window if the requested size is larger than the window (Damien Le Moal) - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle controller-specific size and alignment constraints, and add test cases to the endpoint test driver (Damien Le Moal) - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe DWC-specific alignment requirements (Damien Le Moal) - Synchronously cancel command handler work in endpoint test before cleaning up DMA and BARs (Damien Le Moal) - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel) - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas Cassel) - Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT property (Zhongqiu Han) - Release PCI domain ID of Endpoint controller parent (not controller itself) and before unregistering the controller, to avoid use-after-free (Zijun Hu) - Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing the secondary controller associated with an NTB (Zijun Hu) Cadence PCIe controller driver: - Lower severity of 'phy-names' message (Bartosz Wawrzyniak) Freescale i.MX6 PCIe controller driver: - Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that prevents use of L2 (Stefan Eichenberger) Intel VMD host bridge driver: - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 DT binding to require the exact number of clocks for each SoC (Fei Shao) - Add support for DT 'max-link-speed' and 'num-lanes' properties to restrict the link speed and width (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) NVIDIA Tegra194 PCIe controller driver: - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) Qualcomm PCIe controller driver: - Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov) - Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) Rockchip PCIe controller driver: - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align value (Damien Le Moal) - When unmapping an endpoint window, compute the region index instead of searching for it, and verify that the address was mapped (Damien Le Moal) - When mapping an endpoint window, verify that the address hasn't been mapped already (Damien Le Moal) - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal) - Fix MSI IRQ data mapping to observe the alignment constraint, which fixes intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le Moal) - Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources() for consistency with similar DT interfaces (Damien Le Moal) - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do it only in the endpoint start operation (Damien Le Moal) - Implement pci_epc_ops.stop_link() to disable link training and controller configuration (Damien Le Moal) - Attempt link training at 5 GT/s when both partners support it (Damien Le Moal) - Add a handler for PERST# signal so we can detect host-initiated resets and start link training after PERST# is deasserted (Damien Le Moal) Synopsys DesignWare PCIe controller driver: - Clear outbound address on unmap so dw_pcie_find_index() won't match an ATU index that was already unmapped (Damien Le Moal) - Use of_property_present() instead of of_property_read_bool() when testing for presence of non-boolean DT properties (Rob Herring) - Advertise 1MB size if endpoint supports Resizable BARs, which was inadvertently lost in v6.11 (Niklas Cassel) TI J721E PCIe driver: - Add PCIe support for J722S SoC (Siddharth Vadapalli) - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us), before deasserting PERST# to ensure power and refclk are stable (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex mode (Kishon Vijay Abraham I) - Try to avoid unrecoverable SError for attempts to issue config transactions when the link is down; this is racy but the best we can do (Kishon Vijay Abraham I) Miscellaneous: - Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan)" * tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits) PCI: rockchip-ep: Handle PERST# signal in EP mode PCI: rockchip-ep: Improve link training PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation PCI: rockchip-ep: Refactor endpoint link training enable PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt() PCI: rockchip-ep: Fix MSI IRQ data mapping PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() PCI: rockchip-ep: Use a macro to define EP controller .align feature PCI: rockchip-ep: Fix address translation unit programming PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices tools: PCI: Fix incorrect printf format specifiers ...
2024-11-07ethernet: cavium: Replace deprecated PCI functionsPhilipp Stanner
pcim_iomap_regions() and pcim_iomap_table() have been deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace the deprecated PCI functions with their successors. Link: https://lore.kernel.org/r/20241016094911.24818-8-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com>
2024-10-09net: liquidio: Remove unused cn23xx_dump_pf_initialized_regsDr. David Alan Gilbert
cn23xx_dump_pf_initialized_regs() was added in 2016's commit 72c0091293c0 ("liquidio: CN23XX device init and sriov config") but hasn't been used. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241009003841.254853-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04net: ethernet: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09net: thunderx: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20240906144632.404651-8-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-09liquidio: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20240906144632.404651-7-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27net: liquidio: Remove unused declarationsYue Haibing
Commit da15c78b5664 ("liquidio CN23XX: VF register access") declared cn23xx_dump_vf_initialized_regs() but never implemented it. octeon_dump_soft_command() is never implemented and used since introduction in commit 35878618c92d ("liquidio: Added delayed work for periodically updating the link statistics."). And finally, a few other declarations were never implenmented since introduction in commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters"). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240824083107.3639602-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27net: thunderx: Remove unused declarationsYue Haibing
Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") declared nicvf_qset_reg_{write,read}() but never implemented. Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") declared bgx_add_dmac_addr() but no implementation. After commit 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.") octeon_mdiobus_force_mod_depencency() is not used any more. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240824082754.3637963-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15net: thunder_bgx: Fix netdev structure allocationMarc Zyngier
Commit 94833addfaba ("net: thunderx: Unembed netdev structure") had a go at dynamically allocating the netdev structures for the thunderx_bgx driver. This change results in my ThunderX box catching fire (to be fair, it is what it does best). The issues with this change are that: - bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and bgx_init_of_phy(), both expecting netdev to be a valid pointer. - bgx_init_of_phy() populates the MAC addresses for *all* LMACs attached to a given BGX instance, and thus needs netdev for each of them to have been allocated. There is a few things to be said about how the driver mixes LMAC and BGX states which leads to this sorry state, but that's beside the point. To address this, go back to a situation where all netdev structures are allocated before the driver starts relying on them, and move the freeing of these structures to driver removal. Someone brave enough can always go and restructure the driver if they want. Fixes: 94833addfaba ("net: thunderx: Unembed netdev structure") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-27net: thunderx: Unembed netdev structureBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct lmac by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev() to allocate the net_device object at bgx_lmac_enable(). The free of the device occurs at bgx_lmac_disable(). Do not free_netdevice() if bgx_lmac_enable() fails after lmac->netdev is allocated, since bgx_lmac_disable() is called if bgx_lmac_enable() fails, and lmac->netdev will be freed there (similarly to lmac->dmacs). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240626173503.87636-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts, no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-07liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packetAleksandr Mishin
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-28net: ethernet: liquidio: remove unused structsDr. David Alan Gilbert
'niclist' and 'oct_link_status_resp' are unused since the original commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters"). Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-24net: fill in MODULE_DESCRIPTION()s for liquidioBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Cavium Liquidio. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240123190332.677489-4-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-12net: liquidio: fix clang-specific W=1 build warningsDmitry Antipov
When compiling with clang-18 and W=1, I've noticed the following warnings: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual callback definitions (at the cost of adding an extra forward declaration). Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240111162432.124014-1-dmantipov@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09cavium/liquidio: replace deprecated strncpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect `app_name` to be NUL-terminated: dev_info(&oct->pci_dev->dev, "Running %s (%llu Hz)\n", app_name, CVM_CAST64(cs->corefreq)); ... and it seems NUL-padding is not required, let's opt for strscpy(). For `oct->boardinfo.name/serial_number` let's opt for strscpy() as well since it is expected to be NUL-terminated and does not require NUL-padding as `oct` is zero-initialized in octeon_device.c +707: | buf = vzalloc(size); | if (!buf) | return NULL; | | oct = (struct octeon_device *)buf; Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-octeon_device-c-v1-1-9a207cef9438@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09liquidio: replace deprecated strncpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as rep_cfg is memset to 0: | memset(&rep_cfg, 0, sizeof(rep_cfg)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_vf_rep-c-v1-1-92123a747780@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09net: liquidio: replace deprecated strncpy with strscpy_padJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We know `fw_type` must be NUL-terminated based on use here: | static bool fw_type_is_auto(void) | { | return strncmp(fw_type, LIO_FW_NAME_TYPE_AUTO, | sizeof(LIO_FW_NAME_TYPE_AUTO)) == 0; | } ...and here | module_param_string(fw_type, fw_type, sizeof(fw_type), 0444); Let's opt to NUL-pad the destination buffer as well so that we maintain the same exact behavior that `strncpy` provided here. A suitable replacement is `strscpy_pad` due to the fact that it guarantees both NUL-termination and NUL-padding on the destination buffer. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_main-c-v1-1-663e3f1d8f99@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09liquidio: replace deprecated strncpy/strcpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as drvinfo is memset to 0: | memset(drvinfo, 0, sizeof(struct ethtool_drvinfo)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_ethtool-c-v1-1-ab565ab4d197@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-20net: ethernet: cavium: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-28Merge tag 'net-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
2023-06-07net: liquidio: fix mixed module-builtin objectMasahiro Yamada
With CONFIG_LIQUIDIO=m and CONFIG_LIQUIDIO_VF=y (or vice versa), $(common-objs) are linked to a module and also to vmlinux even though the expected CFLAGS are different between builtins and modules. This is the same situation as fixed by commit 637a642f5ca5 ("zstd: Fixing mixed module-builtin objects"). Introduce the new module, liquidio-core, to provide the common functions to liquidio and liquidio-vf. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-30liquidio: Use vzalloc()Christophe JAILLET
Use vzalloc() instead of hand writing it with vmalloc()+memset(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/93b010824d9d92376e8d49b9eb396a0fa0c0ac80.1685216322.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-12net: liquidio: lio_main: Remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10net: liquidio: lio_vf_main: Remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-08net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueuesTejun Heo
BACKGROUND ========== When multiple work items are queued to a workqueue, their execution order doesn't match the queueing order. They may get executed in any order and simultaneously. When fully serialized execution - one by one in the queueing order - is needed, an ordered workqueue should be used which can be created with alloc_ordered_workqueue(). However, alloc_ordered_workqueue() was a later addition. Before it, an ordered workqueue could be obtained by creating an UNBOUND workqueue with @max_active==1. This originally was an implementation side-effect which was broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered"). Because there were users that depended on the ordered execution, 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") made workqueue allocation path to implicitly promote UNBOUND workqueues w/ @max_active==1 to ordered workqueues. While this has worked okay, overloading the UNBOUND allocation interface this way creates other issues. It's difficult to tell whether a given workqueue actually needs to be ordered and users that legitimately want a min concurrency level wq unexpectedly gets an ordered one instead. With planned UNBOUND workqueue updates to improve execution locality and more prevalence of chiplet designs which can benefit from such improvements, this isn't a state we wanna be in forever. This patch series audits all callsites that create an UNBOUND workqueue w/ @max_active==1 and converts them to alloc_ordered_workqueue() as necessary. WHAT TO LOOK FOR ================ The conversions are from alloc_workqueue(WQ_UNBOUND | flags, 1, args..) to alloc_ordered_workqueue(flags, args...) which don't cause any functional changes. If you know that fully ordered execution is not ncessary, please let me know. I'll drop the conversion and instead add a comment noting the fact to reduce confusion while conversion is in progress. If you aren't fully sure, it's completely fine to let the conversion through. The behavior will stay exactly the same and we can always reconsider later. As there are follow-up workqueue core changes, I'd really appreciate if the patch can be routed through the workqueue tree w/ your acks. Thanks. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org
2023-03-24net: liquidio: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-22liquidio: remove unused IQ_INSTR_MODE_64B functionTom Rix
clang with W=1 reports drivers/net/ethernet/cavium/liquidio/request_manager.c:43:19: error: unused function 'IQ_INSTR_MODE_64B' [-Werror,-Wunused-function] static inline int IQ_INSTR_MODE_64B(struct octeon_device *oct, int iq_no) ^ This function and its macro wrapper are not used, so remove them. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321184811.1827306-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-10net: thunderx: take into account xdp_features setting tx/rx queuesLorenzo Bianconi
thunderx nic allows xdp just if enough hw queues are available for XDP. Take into account queues configuration setting xdp_features. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-12liquidio: use strscpy() to instead of strncpy()Xu Panda
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net: thunderx: Fix missing destroy_workqueue of nicvf_rx_mode_wqYongqiang Liu
The nicvf_probe() won't destroy workqueue when register_netdev() failed. Add destroy_workqueue err handle case to fix this issue. Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.") Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-24net: thunderx: Fix the ACPI memory leakYu Liao
The ACPI buffer memory (string.pointer) should be freed as the buffer is not used after returning from bgx_acpi_match_id(), free it to prevent memory leak. Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.") Signed-off-by: Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-18net: liquidio: simplify if expressionLeon Romanovsky
Fix the warning reported by kbuild: cocci warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B Fixes: 8979f428a4af ("net: liquidio: release resources when liquidio driver open failed") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: liquidio: release resources when liquidio driver open failedZhengchao Shao
When liquidio driver open failed, it doesn't release resources. Compile tested only. Fixes: 5b07aee11227 ("liquidio: MSIX support for CN23XX") Fixes: dbc97bfd3918 ("net: liquidio: Add missing null pointer checks") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-11ptp: convert remaining drivers to adjfine interfaceJacob Keller
Convert all remaining drivers that still use .adjfreq to the newer .adjfine implementation. These drivers are not straightforward, as they use non-standard methods of programming their hardware. They are all converted to use scaled_ppm_to_ppb to get the parts per billion value that their logic depends on. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Cc: Derek Chickles <dchickles@marvell.com> Cc: Satanand Burla <sburla@marvell.com> Cc: Felix Manlunas <fmanlunas@marvell.com> Cc: Raju Rangoju <rajur@chelsio.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Cc: Martin Habets <habetsm.xilinx@gmail.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03eth: octeon: fix build after netif_napi_add() changesJakub Kicinski
Guenter reports I missed a netif_napi_add() call in one of the platform-specific drivers: drivers/net/ethernet/cavium/octeon/octeon_mgmt.c: In function 'octeon_mgmt_probe': drivers/net/ethernet/cavium/octeon/octeon_mgmt.c:1399:9: error: too many arguments to function 'netif_napi_add' 1399 | netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, | ^~~~~~~~~~~~~~ Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: b48b89f9c189 ("net: drop the weight argument from netif_napi_add") Link: https://lore.kernel.org/r/20221002175650.1491124-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29net: liquidio: Remove unused struct lio_trusted_vf_ctxYuan Can
After commit 6870957ed5bc("liquidio: make soft command calls synchronous"), no one use struct lio_trusted_vf_ctx, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20220927133940.104181-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20liquidio: CN23XX: delete repeated words, add missing words and fix typo in ↵Ruffalo Lavoisier
comment - Delete the repeated word 'to' in the comment. - Add the missing 'use' word within the sentence. - Correct spelling on 'malformation', 'needs'. Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220919053447.5702-1-RuffaloLavoisier@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-17net: thunderx: remove null check after call container_of()Haowen Bai
container_of() will never return NULL, so remove useless code. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1652696212-17516-1-git-send-email-baihaowen@meizu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>