summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
AgeCommit message (Collapse)Author
2019-12-17cxgb4/chtls: fix ULD connection failures due to wrong TID baseShahjada Abul Husain
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c21939998802 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in connection failures for ULDs. So, fix all related code to properly recalculate the TID start index based on whether high priority filters are enabled or not. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17cxgb4: fix missed high priority region calculationShahjada Abul Husain
commit c21939998802 ("cxgb4: add support for high priority filters") has missed considering high priority region calculation in some code paths. This patch fixes them. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10cxgb4: add support for high priority filtersShahjada Abul Husain
T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: add TC-MATCHALL classifier ingress offloadRahul Lakkireddy
Add TC-MATCHALL classifier ingress offload support. The same actions supported by existing TC-FLOWER offload can be applied to all incoming traffic on the underlying interface. Ensure the rule priority doesn't conflict with existing rules in the TCAM. Only 1 ingress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Added check to ensure the matchall rule's prio doesn't conflict with other rules in TCAM. - Added logic to fill default mask for VIID, if none has been provided, to prevent conflict with duplicate VIID rules. - Used existing variables in private structure to fill VIID info, instead of extracting the info manually. v3: - No change. v2: - Removed logic to fetch free index from end of TCAM. Must maintain same ordering as in kernel. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: check rule prio conflicts before offloadRahul Lakkireddy
Only offload rule if it satisfies both of the following conditions: 1. The immediate previous rule has priority <= current rule's priority. 2. The immediate next rule has priority >= current rule's priority. Also rework free entry fetch logic to search from end of TCAM, instead of beginning, because higher indices have lower priority than lower indices. This is similar to how TC auto generates priority values. v5: - Fixed commit message and comment to include comparison for equal priority. v4: - Patch added in this version. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24cxgb4: Re-work the logic for mps refcountingRaju Rangoju
Remove existing mps refcounting code which was added only for encap filters and add necessary data structures/functions to support mps reference counting for all the mac filters. Also add wrapper functions for allocating and freeing encap mac filters. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23cxgb4: use firmware API for validating filter specRaju Rangoju
Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22cxgb4: Enable hash filter with offloadVishal Kulkarni
Hash (exact-match) filters used for offloading flows share the same active region resources on the chip with upper layer drivers, like iw_cxgb4, chcr, etc. Currently, only either Hash filters or ULDs can use the active region resources, but not both. Hence, use the new firmware configuration parameters (when available) to allow both the Hash filters and ULDs to share the active region simultaneously. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27cxgb4: Delete all hash and TCAM filters before resource cleanupVishal Kulkarni
During driver unload, hash/TCAM filter deletion doesn't wait for completion.This patch deletes all the filters with completion before clearing the resources. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08cxgb4: Don't return EAGAIN when TCAM is full.Vishal Kulkarni
During hash filter programming, driver needs to return ENOSPC error intead of EAGAIN when TCAM is full. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04cxgb4/chtls: Prefix adapter flags with CXGB4Arjun Vynipadath
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07cxgb4: mk_act_open_req() buggers ->{local, peer}_ip on big-endian hostsAl Viro
Unlike fs.val.lport and fs.val.fport, cxgb4_process_flow_match() sets fs.val.{l,f}ip to net-endian values without conversion - they come straight from flow_dissector_key_ipv4_addrs ->dst and ->src resp. So the assignment in mk_act_open_req() ought to be a straight copy. As far as I know, T4 PCIe cards do exist, so it's not as if that thing could only be found on little-endian systems... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14cxgb4: add tc flower match support for tunnel VNIKumar Sanghvi
Adds support for matching flows based on tunnel VNI value. Introduces fw APIs for allocating/removing MPS entries related to encapsulation. And uses the same while adding/deleting filters for offloading flows based on tunnel VNI match. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14cxgb4: Correct ntuple mask validation for hash filtersKumar Sanghvi
Earlier code of doing bitwise AND with field width bits was wrong. Instead, simplify code to calculate ntuple_mask based on supplied fields and then compare with mask configured in hw - which is the correct and simpler way to validate ntuple mask. Fixes: 3eb8b62d5a26 ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30libcxgb,cxgb4: use __skb_put_zero to simplfy codeYueHaibing
use helper __skb_put_zero to replace the pattern of __skb_put() && memset() Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02cxgb4: remove dead code when allocating filterGanesh Goudar
Error code is already returned earlier if filter exists at specified location. So, remove dead code trying to free existing filter. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19cxgb4: IPv6 filter takes 2 tidsGanesh Goudar
on T6, IPv6 filter would occupy 2 tids instead of 4. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: Check alignment constraint for T6Ganesh Goudar
Update the check for setting IPV4 filters and align filter_id to multiple of 2, only for IPv6 filters in case of T6. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02cxgb4: use CLIP with LIP6 on T6 for TCAM filtersGanesh Goudar
On T6, LIP compression is always enabled for IPv6 and uncompressed IPv6 for LIP is not supported. So, for IPv6 TCAM filters on T6, add LIP6 to CLIP on filter creation, and release the same on filter deletion. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03cxgb4: fix error return code in cxgb4_set_hash_filter()Wei Yongjun
Fix to return a negative error code from thecxgb4_alloc_atid() error handling case instead of 0. Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-By: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to create hash-filters via tc-flower offloadKumar Sanghvi
Determine whether the flow classifies as exact-match with respect to 4-tuple and configured tuple mask in hw. If successfully classified as exact-match, offload the flow as hash-filter in hw. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to retrieve stats for hash filtersKumar Sanghvi
Add support to retrieve packet-count and byte-count for hash-filters by retrieving filter-entry appropriately based on whether the request is for hash-filter or not. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to delete hash filterKumar Sanghvi
Use a combined ulptx work-request to send hash filter deletion request to hw. Hash filter deletion reply is processed on getting cpl_abort_rpl_rss. Release any L2T/SMT/CLIP entries on filter deletion. Also, free up the corresponding filter entry. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: add support to create hash filtersKumar Sanghvi
Add support to create hash (exact-match) filters based on the value of 'hash' field in ch_filter_specification. Allocate SMT/L2T entries if DMAC-rewrite/SMAC-rewrite is requested. Allocate CLIP entry in case of IPv6 filter. Use cpl_act_open_req[6] to send hash filter create request to hw. Also, the filter tuple is calculated as part of sending this request. Hash-filter reply is processed on getting cpl_act_open_rpl. In case of success, various bits/fields in filter-tcb are set per filter requirement, such as enabling filter hitcnts, and/or various header rewrite operations, such as VLAN-rewrite, NAT or (L3/L4)-rewrite, and SMAC/DMAC-rewrite. In case of failure, clear the filter entry and release any hw resources occupied by it. The patch also moves the functions set_tcb_field, set_tcb_tflag and configure_filter_smac towards beginning of file. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01cxgb4: initialize hash-filter configurationKumar Sanghvi
Add support for hash-filter configuration on T6. Also, do basic checks for the related initialization. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20cxgb4: introduce fw_filter2_wr to prepare for L3/L4 rewrite supportKumar Sanghvi
Update driver to use new fw_filter2_wr in order to support rewrite of L3/L4 header fields via filters. Query FW_PARAMS_PARAM_DEV_FILTER2_WR to check whether FW supports this new wr. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20cxgb4: introduce SMT ops to prepare for SMAC rewrite supportKumar Sanghvi
Introduce SMT operations for allocating/removing entries from SMAC table. Make TCAM filters use the SMT ops whenever SMAC rewrite is required. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22cxgb4: fetch stats for offloaded tc flower flowsKumar Sanghvi
Add support to retrieve stats from hardware for offloaded tc flower flows. Also, poll for the stats of offloaded flows via timer callback. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22cxgb4: add basic tc flower offload supportKumar Sanghvi
Add support to add/remove flows for offload. Following match and action are supported for offloading a flow: Match: ether-protocol, IPv4/IPv6 addresses, L4 ports (TCP/UDP) Action: drop, redirect to another port on the device. The qualifying flows can have accompanying mask information. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21cxgb4: avoid stall while shutting down the adapterGanesh Goudar
do not wait for completion while deleting the filters when the adapter is shutting down because we may not get the response as interrupts will be disabled. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25cxgb4: fix -ve error check on a signed iqColin Ian King
iq is unsigned, so the error check for iq < 0 has no effect so errors can slip past this check. Fix this by making iq signed and also get_filter_steerq return a signed int so a -ve error can be returned. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: add common api support for configuring filtersRahul Lakkireddy
Enable filters for non-offload configuration and add common api support for setting and deleting filters in LE-TCAM region of the hardware. IPv4 filters occupy one slot. IPv6 filters occupy 4 slots and must be on a 4-slot boundary. IPv4 filters can not occupy a slot belonging to IPv6 and the vice-versa is also true. Filters are set and deleted asynchronously. Use completion to wait for reply from firmware in order to allow for synchronization if needed. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: move common filter code to separate fileRahul Lakkireddy
Move common filter code to separate files. Also fix the following checkpatch checks. CHECK: Comparison to NULL could be written "!f->l2t" + if (f->l2t == NULL) { CHECK: spaces preferred around that '/' (ctx:VxV) + fwr->len16_pkd = htonl(FW_WR_LEN16_V(sizeof(*fwr)/16)); Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-19 00:41:13 +0000