summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4vf
AgeCommit message (Collapse)Author
2022-01-09cxgb4vf: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b14986ea39cea2ca9a6cd0476a3fc167c853ee67.1641736772.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-23net: chelsio: cxgb4vf: Fix an error code in cxgb4vf_pci_probe()Zheyu Ma
During the process of driver probing, probe function should return < 0 for failure, otherwise kernel will treat value == 0 as success. Therefore, we should set err to -EINVAL when adapter->registered_device_map is NULL. Otherwise kernel will assume that driver has been successfully probed and will cause unexpected errors. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19cxgb4: Use struct_group() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct fw_eth_tx_pkt_vm_wr around members ethmacdst, ethmacsrc, ethtype, and vlantci, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of ethmacdst. "pahole" shows no size nor member offset changes to struct fw_eth_tx_pkt_vm_wr. "objdump -d" shows no object code changes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: chelsio: use eth_hw_addr_set()Jakub Kicinski
Convert chelsio drivers from memcpy() and ether_addr_copy() to eth_hw_addr_set(). They lack includes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net: chelsio: cxgb4vf: Make use of the helper function dev_err_probe()Cai Huoqing
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23net: chelsio: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-17net: chelsio: cxgb4vf: Fix wrong function name in commentsYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/chelsio/cxgb4vf/sge.c:966: warning: expecting prototype for check_ring_tx_db(). Prototype was for ring_tx_db() instead Cc: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-16cxgb4vf: convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-30cxgb4vf: configure ports accessible by the VFNirranjan Kirubaharan
Find ports accessible by the VF, based on the index of the mac address stored for the VF in the adapter. If no mac address is stored for the VF, use the port mask provided by firmware. Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28cxgb4vf: fix t4vf_eth_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4vf: update kernel-doc line commentsRahul Lakkireddy
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4be754 ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d91464da ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a9cc4 ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb6407 ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05cxgb4/cxgb4vf: Remove superfluous void * cast in debugfs_create_file() callGeert Uytterhoeven
There is no need to cast a typed pointer to a void pointer when calling a function that accepts the latter. Remove it, as the cast prevents further compiler checks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: cxgb4vf: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/chelsio: Delete drive and module versionsLeon Romanovsky
Clean the code related to various versions: driver and module. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10cxgb4: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. If a debugfs call fails, it will properly warn in the syslog, there's no need for all individual drivers to also print a message, so that is one more reason to not care about checking the return values. Cc: Vishal Kulkarni <vishal@chelsio.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-26cxgb4/cxgb4vf_main: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c: In function ‘fwevtq_handler’: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:520:7: warning: this statement may fall through [-Wimplicit-fallthrough=] cpl = (void *)p; ~~~~^~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:524:2: note: here case CPL_SGE_EGR_UPDATE: { ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-29cxgb4/cxgb4vf: Display advertised FEC in ethtoolVishal Kulkarni
This patch advertises Forward Error Correction in ethtool Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01cxgb4vf: Call netif_carrier_off properly in pci_probeArjun Vynipadath
netif_carrier_off() should be called only after register_netdev(). Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01cxgb4vf: Revert force link up behaviourArjun Vynipadath
Reverting force link up changes since this behaviour can be achieved using VF link state feature. Reverts: commit 0913667ab3ad ("cxgb4vf: Forcefully link up virtual interfaces") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01cxgb4vf: Prefix adapter flags with CXGB4VFArjun Vynipadath
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4VF. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4vf: Enter debugging mode if FW is inaccessibleArjun Vynipadath
If we are not able to reach firmware, enter debugging mode that will help us to get adapter logs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4/cxgb4vf: Fix up netdev->hw_featuresArjun Vynipadath
GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14cxgb4/cxgb4vf: Add support for SGE doorbell queue timerVishal Kulkarni
T6 introduced a Timer Mechanism in SGE called the SGE Doorbell Queue Timer. With this we can now configure TX Queues to get CIDX Updates when: Time(CIDX == PIDX) >= Timer Previously we rely on TX Queue Status Page updates by hardware for DMA completions. This will make Hardware/Firmware actually deliver the CIDX Updates as Ingress Queue messages with commensurate Interrupts. So we now have a new RX Path component for processing CIDX Updates and reclaiming TX Descriptors faster. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13cxgb4vf: Few more link management changes.Vishal Kulkarni
CR4_QSFP 10G Speed technology should be 10000baseKR_Full And also report available FEC modes. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()Arjun Vynipadath
{t4/t4_vf}_change_mac() API's were only doing additions to MPS_TCAM. This will fail, when the number of tcam entries is limited particularly in vf's. This fix programs hash region with the mac address, when TCAM addtion fails for {t4/t4vf}_change_mac(). Since the locally maintained driver list for hash entries is shared across mac_{sync/unsync}(), added an extra parameter if_mac to track the address added thorugh {t4/t4vf}_change_mac() Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29cxgb4vf: Update port information in cxgb4vf_open()Arjun Vynipadath
It's possible that the basic port information could have changed since we first read it. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22cxgb4/cxgb4vf: Link management changesVishal Kulkarni
1) Speed should be supported by Physical Port Capabilities. 2) report Forward Error Correction mode which are available. 3) Added few comments. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-15cxgb4: remove DEFINE_SIMPLE_DEBUGFS_FILE()Yangtao Li
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define such a macro, so remove DEFINE_SIMPLE_DEBUGFS_FILE. Also use the DEFINE_SHOW_ATTRIBUTE macro to simplify some code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20cxgb4/cxgb4vf: Fix mac_hlist initialization and freeArjun Vynipadath
Null pointer dereference seen when cxgb4vf driver is unloaded without bringing up any interfaces, moving mac_hlist initialization to driver probe and free the mac_hlist in remove to fix the issue. Fixes: 24357e06ba51 ("cxgb4vf: fix memleak in mac_hlist initialization") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09cxgb4vf: free mac_hlist properlyArjun Vynipadath
The locally maintained list for tracking hash mac table was not freed during driver remove. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09cxgb4vf: fix memleak in mac_hlist initializationArjun Vynipadath
mac_hlist was initialized during adapter_up, which will be called every time a vf device is first brought up, or every time when device is brought up again after bringing all devices down. This means our state of previous list is lost, causing a memleak if entries are present in the list. To fix that, move list init to the condition that performs initial one time adapter setup. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: chelsio: Use zeroing memory allocator instead of allocator/memsetYueHaibing
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25cxgb4/cxgb4vf: Notify link changes to OS-dependent codeArjun Vynipadath
We have a confusion of two different abstractions in the Common Code: Physical Link (Port) and Logical Network Interface (Virtual Interface), and we haven't been properly managing the state of the intersection of those two abstractions. On the one hand we have the Physical state of the Link -- up or down -- and on the other we have the logical state of the VI, enabled or not. {ethN} refers to both the Physical and Logical State. In this case, ifconfig only affects/interrogates the Logical State of a VI, and ethtool only deals with the Physical State. And these are different. So, just because we disable the VI, we don't really want to change the Physical Link Up/Down state. Thus, the previous hack to set "lc->link_ok = 0" when we disable a VI is completely incorrect. Where we get into trouble is where the Physical Link State and the Logical VI State cross swords. And that happens in t4_handle_get_port_info() where we need to manage/safe the Physical Link State, but we also need to know when the Logical VI State has changed and pass that back up to the OS-dependent Driver routine t4_os_link_changed() which is concerned about the Logical Interface. So we enable a VI and that causes Firmware to send us a new Port Information message, but if none of the Physical Link State particulars have changed, we don't call t4_os_link_changed(). This fix uses the existing OS Contract APIs for the Common Code to inform the OS-dependent portion of the Host Driver when the "Link" (really Logical Network Interface) is "up" or "down". A new API t4_enable_pi_params() is added which calls t4_enable_vi_params() and, if that is successful, then calls back to the OS Contract API t4_os_link_changed() notifying the OS-dependent layer of the potential Link State change. Original Work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25cxgb4/cxgb4vf: link management changes for new SFPGanesh Goudar
newer SFPs like SFP28 and QSFP28 Transceiver Modules present several new possibilities which we haven't faced before. Fix the assumptions in the code reflecting the more limited capabilities of previous Transceiver Module systems Original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23cxgb4: change the port capability bits definitionGanesh Goudar
MDI Port Capabilities bit definitions were inconsistent with regard to the MDI enum values. 2 bits used to define MDI in the port capabilities are not really separable, it's a 2-bit field with 4 different values. Change the port capability bit definitions to be "AUTO" and "STRAIGHT" in order to get them to line up with the enum's. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17cxgb4vf: display pause settingsGanesh Goudar
Add support to display pause settings Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12cxgb4/cxgb4vf: check fw caps to set link mode maskGanesh Goudar
check firmware capabilities before setting ethtool link mode mask, also add few missing speeds. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04cxgb4vf: Forcefully link up virtual interfacesArjun Vynipadath
The Virtual Interfaces are connected to an internal switch on the chip which allows VIs attached to the same port to talk to each other even when the port link is down. As a result, we generally want to always report a VI's link as being "up". Based on the original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-15 09:19:33 +0000