summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio
AgeCommit message (Collapse)Author
2020-05-01cxgb4: Add missing annotation for service_ofldq()Jules Irenge
Sparse reports a warning at service_ofldq() warning: context imbalance in service_ofldq() - unexpected unlock The root cause is the missing annotation at service_ofldq() Add the missing __must_hold(&q->sendq.lock) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30cxgb4: fix EOTID leak when disabling TC-MQPRIO offloadRahul Lakkireddy
Under heavy load, the EOTID termination FLOWC request fails to get enqueued to the end of the Tx ring due to lack of credits. This results in EOTID leak. When disabling TC-MQPRIO offload, the link is already brought down to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be sent outside the wire, to make room for FLOWC request. Also, move the FLOWC descriptor consumption logic closer to when the FLOWC request is actually posted to hardware. Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23cxgb4: fix adapter crash due to wrong MC sizeVishal Kulkarni
In the absence of MC1, the size calculation function cudbg_mem_region_size() was returing wrong MC size and resulted in adapter crash. This patch adds new argument to cudbg_mem_region_size() which will have actual size and returns error to caller in the absence of MC1. Fixes: a1c69520f785 ("cxgb4: collect MC memory dump") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20cxgb4: fix large delays in PTP synchronizationRahul Lakkireddy
Fetching PTP sync information from mailbox is slow and can take up to 10 milliseconds. Reduce this unnecessary delay by directly reading the information from the corresponding registers. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net/cxgb4: Check the return from t4_query_params properlyJason Gunthorpe
Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-01cxgb4: free MQPRIO resources in shutdown pathRahul Lakkireddy
Perform missing MQPRIO resource cleanup in PCI shutdown path. Also, fix MQPRIO MSIX bitmap leak in resource cleanup. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-01cxgb4: fix MPS index overwrite when setting MAC addressHerat Ramani
cxgb4_update_mac_filt() earlier requests firmware to add a new MAC address into MPS TCAM. The MPS TCAM index returned by firmware is stored in pi->xact_addr_filt. However, the saved MPS TCAM index gets overwritten again with the return value of cxgb4_update_mac_filt(), which is wrong. When trying to update to another MAC address later, the wrong MPS TCAM index is sent to firmware, which causes firmware to return error, because it's not the same MPS TCAM index that firmware had sent earlier to driver. So, fix by removing the wrong overwrite being done after call to cxgb4_update_mac_filt(). Fixes: 3f8cfd0d95e6 ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: Herat Ramani <herat@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-31cxgb4/chcr: nic-tls stats in ethtoolRohit Maheshwari
Included nic tls statistics in ethtool stats. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: sched: expose HW stats types per action used by driversJiri Pirko
It may be up to the driver (in case ANY HW stats is passed) to select which type of HW stats he is going to use. Add an infrastructure to expose this information to user. $ tc filter add dev enp3s0np1 ingress proto ip handle 1 pref 1 flower dst_ip 192.168.1.1 action drop $ tc -s filter show dev enp3s0np1 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 10 sec used 10 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats immediate <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Overlapping header include additions in macsec.c A bug fix in 'net' overlapping with the removal of 'version' string in ena_netdev.c Overlapping test additions in selftests Makefile Overlapping PCI ID table adjustments in iwlwifi driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25cxgb4: Add support to catch bits set in INT_CAUSE5Rahul Kundu
This commit adds support to catch any bits set in SGE_INT_CAUSE5 for Parity Errors. F_ERR_T_RXCRC flag is used to ignore that particular bit as it is not considered as fatal. So, we clear out the bit before looking for error. This patch now read and report separately all three registers(Cause1, Cause2, Cause5). Also, checks for errors if any. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25cxgb4: remove set but not used variable 'tab'YueHaibing
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c: In function cxgb4_get_free_ftid: drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c:547:23: warning: variable tab set but not used [-Wunused-but-set-variable] commit 8d174351f285 ("cxgb4: rework TC filter rule insertion across regions") involved this, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24cxgb4/ptp: pass the sign of offset delta in FW CMDRaju Rangoju
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix Txq restart check during backpressureRahul Lakkireddy
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18cxgb4: rework TC filter rule insertion across regionsRahul Lakkireddy
Chelsio NICs have 3 filter regions, in following order of priority: 1. High Priority (HPFILTER) region (Highest Priority). 2. HASH region. 3. Normal FILTER region (Lowest Priority). Currently, there's a 1-to-1 mapping between the prio value passed by TC and the filter region index. However, it's possible to have multiple TC rules with the same prio value. In this case, if a region is exhausted, no attempt is made to try inserting the rule in the next available region. So, rework and remove the 1-to-1 mapping. Instead, dynamically select the region to insert the filter rule, as long as the new rule's prio value doesn't conflict with existing rules across all the 3 regions. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*Jakub Kicinski
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15cxgb4: fix delete filter entry fail in unload pathShahjada Abul Husain
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c21939998802 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in remove filters entry failure for cxgb4 unload path. This patch fix that. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14cxgb4: update T5/T6 adapter register rangesShahjada Abul Husain
Add more T5/T6 registers to be collected in register dump: 1. MPS register range 0x9810 to 0x9864 and 0xd000 to 0xd004. 2. NCSI register range 0x1a114 to 0x1a130 and 0x1a138 to 0x1a1c4. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: cxgb4vf: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: cxgb4: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: cxgb3: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: cxgb2: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08cxgb4/chcr: Add ipv6 support and statisticsRohit Maheshwari
Adding ipv6 support and ktls related statistics. v1->v2: - added blank lines at 2 places. v3->v4: - Replaced atomic_t with atomic64_t - added few necessary stat counters. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08cxgb4/chcr: complete record tx handlingRohit Maheshwari
Added tx handling in this patch. This includes handling of segments contain single complete record. v1->v2: - chcr_write_cpl_set_tcb_ulp is added in this patch. v3->v4: - mss calculation logic. - replaced kfree_skb with dev_kfree_skb_any. - corrected error message reported by kbuild test robot <lkp@intel.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08cxgb4/chcr: Save tx keys and handle HW responseRohit Maheshwari
As part of this patch generated and saved crypto keys, handled HW response of act_open_req and set_tcb_req. Defined connection state update. v1->v2: - optimized tcb update using control queue. - state machine handling when earlier states received. v2->v3: - Added one empty line after function declaration. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08cxgb4/chcr : Register to tls add and del callbackRohit Maheshwari
A new macro is defined to enable ktls tx offload support on Chelsio T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to enable or disable ktls settings on HW. In chcr, enabled tx offload flag in netdev and registered tls_dev_add and tls_dev_del. v1->v2: - mark tcb state to close in tls_dev_del. - u_ctx is now picked from adapter structure. - clear atid in case of failure. - corrected ULP_CRYPTO_KTLS_INLINE value. v2->v3: - add empty line after variable declaration. - local variable declaration in reverse christmas tree ordering. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08flow_offload: check for basic action hw stats typeJiri Pirko
Introduce flow_action_basic_hw_stats_types_check() helper and use it in drivers. That sanitizes the drivers which do not have support for action HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03cxgb4: fix checks for max queues to allocateVishal Kulkarni
Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde72307 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/chelsio: Don't set N/A for not available FWLeon Romanovsky
There is no need to set N/A if FW is not available. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/chelsio: Delete drive and module versionsLeon Romanovsky
Clean the code related to various versions: driver and module. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24chelsio: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06cxgb4: Added tls stats prints.Devulapally Shiva Krishna
Added debugfs entry to show the tls stats. Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEMMichael Ellerman
The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24l2t_seq_next should increase position indexVasily Averin
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24seq_tab_next() should increase position indexVasily Averin
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20cxgb4: fix refcount init for TC-MQPRIO offloadRahul Lakkireddy
Properly initialize refcount to 1 when hardware queue arrays for TC-MQPRIO offload have been freshly allocated. Otherwise, following warning is observed. Also fix up error path to only free hardware queue arrays when refcount reaches 0. [ 130.075342] ------------[ cut here ]------------ [ 130.075343] refcount_t: addition on 0; use-after-free. [ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25 refcount_warn_saturate+0xe1/0x100 [ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb ib_uverbs x86_pkg_temp_thermal cxgb4 igb [ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted 5.5.0-rc1+ #11 [ 130.075362] Hardware name: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2 01/16/2015 [ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100 [ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85 63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1 ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40 [ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286 [ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffff8a2e9fa187d0 [ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09: 000000000000003c [ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12: ffffa48d00c0b848 [ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15: 0000000000000031 [ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000) knlGS:0000000000000000 [ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4: 00000000001606f0 [ 130.075370] Call Trace: [ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4] [ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4] [ 130.075384] ? pfifo_fast_init+0x7e/0xf0 [ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio] [ 130.075389] qdisc_create+0x1bf/0x4a0 [ 130.075390] tc_modify_qdisc+0x1ff/0x770 [ 130.075392] rtnetlink_rcv_msg+0x28b/0x350 [ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110 [ 130.075395] netlink_rcv_skb+0xc6/0x100 [ 130.075396] netlink_unicast+0x1db/0x330 [ 130.075397] netlink_sendmsg+0x2f5/0x460 [ 130.075399] ? _copy_from_user+0x2e/0x60 [ 130.075400] sock_sendmsg+0x59/0x70 [ 130.075401] ____sys_sendmsg+0x1f0/0x230 [ 130.075402] ? copy_msghdr_from_user+0xd7/0x140 [ 130.075403] ___sys_sendmsg+0x77/0xb0 [ 130.075404] ? ___sys_recvmsg+0x84/0xb0 [ 130.075406] ? __handle_mm_fault+0x377/0xaf0 [ 130.075407] __sys_sendmsg+0x53/0xa0 [ 130.075409] do_syscall_64+0x44/0x130 [ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 130.075413] RIP: 0033:0x7f688f13af10 [ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 [ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX: 00007f688f13af10 [ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI: 0000000000000003 [ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09: 0000000000008000 [ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12: 0000000000000000 [ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15: 000000000067c600 [ 130.075418] ---[ end trace 8fbb3bf36a8671db ]--- v2: - Move the refcount_set() closer to where the hardware queue arrays are being allocated. - Fix up error path to only free hardware queue arrays when refcount reaches 0. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17cxgb4/chtls: fix ULD connection failures due to wrong TID baseShahjada Abul Husain
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c21939998802 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in connection failures for ULDs. So, fix all related code to properly recalculate the TID start index based on whether high priority filters are enabled or not. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17cxgb4: fix missed high priority region calculationShahjada Abul Husain
commit c21939998802 ("cxgb4: add support for high priority filters") has missed considering high priority region calculation in some code paths. This patch fixes them. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-10 12:27:06 +0000