summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex/benet
AgeCommit message (Collapse)Author
2013-09-27be2net: Fix to display the VLAN priority for a VFAjit Khaparde
VLAN priority is not being displayed for a VF currently when user executes "ip link show" command. This patch fixes it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to configure VLAN priority for a VF interface.Ajit Khaparde
Thix fix allows the VLAN priority to be configured for a VF interface via the "ip link set DEVICE vf NUM" path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to allow VLAN configuration on VF interfaces.Ajit Khaparde
Now the VF interfaces have privilege to add VLANs. Allow VLANs to be configured on these interfaces. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix number of VLANs supported in UMC mode for BE3-R.Ajit Khaparde
In BE3-R, when UMC is enabled, the number of VLANs that can be added to the interface is reduced to 15. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix VLAN promiscuous mode programmingAjit Khaparde
When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix the size of be_nic_res_desc structureAjit Khaparde
Size of be_nic_res_desc structure is incorrect. Fix it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27be2net: Fix to prevent Tx stall on SH-R when packet size < 32Ajit Khaparde
Tx on SH-R can lockup if the packet size is less than 32 bytes. Pad such packets to a safer 36-byte size. Patch uses the Lancer-R workaround - which checks for packet <= 32-bytes Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13be2net: missing variable initializationAntonio Alecrim Jr
Signed-off-by: Antonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03be2net: set and query VEB/VEPA mode of the PF interfaceAjit Khaparde
SkyHawk-R can support VEB or VEPA mode. This patch will allow the user to set/query this switch setting. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherentJoe Perches
__GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: implement ethtool set/get_channel hooksSathya Perla
Support is provided only for combined channels. When SR-IOV is not enabled, BE3 supports upto 16 channels and Lancer-R/SH-R support upto 32 channels. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_setup() to consolidate queue creation routinesSathya Perla
1) Move be_cmd_if_create() above queue create routines to allow TXQ creation (that requires if_handle) to be clubbed with TX-CQ creation. 2) Consolidate all queue create routines into be_setup_queues() Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fix be_cmd_if_create() to use MBOX if MCCQ is not createdSathya Perla
Currently the IF_CREATE FW cmd is issued only *after* MCCQ is created as it was coded to only use MCCQ. By fixing this, cmd_if_create() can be called before MCCQ is created and the same routine for VF provisioning can be called after. This allows for consolidating all the queue create routines by moving the be_cmd_if_create() call above all queue create calls in be_setup(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: refactor be_get_resources() codeSathya Perla
1) use be_resources{} struct to query/store HW resource limits 2) The HW queue/resource limits for BE2/BE3 chips are mostly called out in driver as constants. Code to handle this is scattered across various places in be_setup(). Consolidate this code into BEx_get_resources(). For Lancer-R, Skyhawk-R, these limits are queried from FW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: Fixup profile management routinesVasundhara Volam
1) Parse PCIe descriptor for max-VFs supported by HW 2) Cleanup NIC descriptor parsing in get_func/profile_config() routines 3) Use common struct definitions for v0 and v1 versions of GET_FUNC_CONFIG Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27be2net: use EQ_CREATEv2 for SH-RSathya Perla
EQ_CREATEv2 explicitly returns the msix-index associated with a EQ. For SH-R this is needed if EQs need to be deleted and re-created without resetting a function. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26be2net: Check for POST state in suspend-resume sequenceSarveshwar Bandi
In suspend-resume sequence, the OS could attempt to initialize the controller before it is ready, check for POST state before going ahead. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c include/linux/inetdevice.h The inetdevice.h conflict involves moving the IPV4_DEVCONF values into a UAPI header, overlapping additions of some new entries. The iwlwifi conflict is a context overlap. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22be2net: fix disabling TX in be_close()Sathya Perla
commit fba875591 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2013-08-15be2net: Clear any capability flags that driver is not interested in.Sarveshwar Bandi
It is possible for some versions of firmware to advertise capabilities that driver is not ready to handle. This may lead to controller stall. Since the driver is interested only in subset of flags, clearing the rest. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: update driver versionSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Initialize "status" in be_cmd_get_die_temperature()Vasundhara Volam
Uninitialized value was being returned in the non-failure case. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: fixup log msgs for async eventsVasundhara Volam
Log the event type for unknown async events Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Fix displaying supported speeds for BE2Vasundhara Volam
The BE2 FW GET_PHY_DETAILS cmd does not return fixed speeds supported. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: don't limit max MAC and VLAN countsVasundhara Volam
For SH-R and Lancer-R, use the FW supported values for Max unicast MACs, Max VLANs and Max multicast MACs. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Do not call get_die_temperature cmd for VFVasundhara Volam
This is a chip wide value and the PFs already report it. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Adding more speeds reported by get_settingsVasundhara Volam
The new speeds are supported by variants of the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05be2net: Staticize local functionsJingoo Han
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:475:6: warning: symbol 'populate_erx_stats' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:1485:6: warning: symbol 'be_rx_compl_process_gro' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:2262:5: warning: symbol 'be_poll' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3223:6: warning: symbol 'flash_cookie' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3280:27: warning: symbol 'get_fsec_info' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1013:5: warning: symbol 'be_cmd_mccq_ext_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1071:5: warning: symbol 'be_cmd_mccq_org_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3166:5: warning: symbol 'be_cmd_get_profile_config_mbox' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3194:5: warning: symbol 'be_cmd_get_profile_config_mccq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:96:6: warning: symbol '_be_roce_dev_remove' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:113:6: warning: symbol '_be_roce_dev_open' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:129:6: warning: symbol '_be_roce_dev_close' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-30be2net: don't use dev_err when AER enabling failsIvan Vecera
The driver uses dev_err when enabling of AER fails (e.g. PCIe AER is not supported). The dev_info is more appropriate to avoid console pollution. Cc: sathya.perla@emulex.com Cc: subbu.seetharaman@emulex.com Cc: ajit.khaparde@emulex.com Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: delete primary MAC address while unloadingSathya Perla
Currently the UC-list is being deleted from the HW MAC table, but the primary MAC is not. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: use SET/GET_MAC_LIST for SH-RSathya Perla
On SH-R and Lancer-R, GET_MAC_LIST cmd is better supported (instead of NTWK_MAC_QUERY cmd) to query provisioned MAC addresses. Similiarly, (on SH-R and Lancer-R) SET_MAC_LIST must be used by the PF to provision a permanent MAC addresses to the VF. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: refactor MAC-addr setup codeSathya Perla
The code to configure the permanent MAC in be_setup() has become quite complicated, with different FW cmds being used for BEx, SH-R and Lancer. Simplify the logic by moving some of this complexity to be_cmds.c. This makes the code in be_setup() a little more readable. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: fix pmac_id for BE3 VFsSathya Perla
For BE3 VFs, the permanent MAC is added by its PF. The VF can retrieve its pmac_id only via the IFACE_CREATE cmd. This is not true for Lancer and SH-R VFs which get the pmac_id by issuing a ADD_IFACE_MAC cmd. So, use this hack only for BE3 VFs. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: allow VFs to program MAC and VLAN filtersSathya Perla
In the current design VFs were not allowed to program MAC/VLAN filters. Only the PF driver was allowed to configure/provision MAC and transparent VLANs to a VF. Change this to support MAC/VLAN filtering on a VF by a VM. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-24be2net: fix MAC address modification for VFSathya Perla
Currently, the VFs by default don't have the privilege to modify MAC address. This will change in a subsequent fix wherein VFs will have the ability to modify MAC/VLAN filters. Fix be_mac_addr_set() logic to support MAC address modification on a privileged VF too. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-16be2net: Fix to avoid hardware workaround when not neededSarveshwar Bandi
Hardware workaround requesting hardware to skip vlan insertion is necessary only when umc or qnq is enabled. Enabling this workaround in other scenarios could cause controller to stall. Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28net/trivial: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19be2net: use pci_vfs_assigned()/pci_num_vf() instead of be_find_vfs()Sathya Perla
be_find_vfs() is no longer needed as the common PCI calls provide the same functionality. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/Kconfig drivers/net/xen-netback/netback.c net/batman-adv/bat_iv_ogm.c net/wireless/nl80211.c The ath9k Kconfig conflict was a change of a Kconfig option name right next to the deletion of another option. The xen-netback conflict was overlapping changes involving the handling of the notify list in xen_netbk_rx_action(). Batman conflict resolution provided by Antonio Quartulli, basically keep everything in both conflict hunks. The nl80211 conflict is a little more involved. In 'net' we added a dynamic memory allocation to nl80211_dump_wiphy() to fix a race that Linus reported. Meanwhile in 'net-next' the handlers were converted to use pre and post doit handlers which use a flag to determine whether to hold the RTNL mutex around the operation. However, the dump handlers to not use this logic. Instead they have to explicitly do the locking. There were apparent bugs in the conversion of nl80211_dump_wiphy() in that we were not dropping the RTNL mutex in all the return paths, and it seems we very much should be doing so. So I fixed that whilst handling the overlapping changes. To simplify the initial returns, I take the RTNL mutex after we try to allocate 'tb'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13be2net: Fix 32-bit DMA Mask handlingSomnath Kotur
Fix to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge 'net' bug fixes into 'net-next' as we have patches that will build on top of them. This merge commit includes a change from Emil Goode (emilgoode@gmail.com) that fixes a warning that would have been introduced by this merge. Specifically it fixes the pingv6_ops method ipv6_chk_addr() to add a "const" to the "struct net_device *dev" argument and likewise update the dummy_ipv6_chk_addr() declaration. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31be2net: Implement initiate FW dump feature for LancerSomnath Kotur
Added code to initiate FW dump via ethtool. Driver checks if the previous dump has been cleared before initiating the dump. It doesn't initiate the dump if it is not cleared. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-30be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hookSomnath Kotur
During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-30be2net: Mark checksum fail for IP fragmented packetsSomnath Kotur
HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27be2net: Trim padded packets for LancerSomnath Kotur
For padded packets, Lancer computes incorrect checksum. The workaround is to trim such packets. This workaround is mainly for IPv4 packets. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27be2net: Pad skb to meet min Tx pkt size in lancerSomnath Kotur
In Lancer, packets that are 32 bytes or less may cause a transmit stall. The work-around is to pad such packets to a 36 byte length. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27be2net: cleanup be_get_drvinfo()Somnath Kotur
Removing the be_cmd_get_fw_ver() query from be_get_drvinfo() and invoking the same from be_setup() and/or post firmware download. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next because some upcoming net-next changes build on top of bug fixes that went into net. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-06 01:43:50 +0000