summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/dpaa2
AgeCommit message (Collapse)Author
2023-06-29Merge tag 'soc-drivers-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Nothing surprising in the SoC specific drivers, with the usual updates: - Added or improved SoC driver support for Tegra234, Exynos4121, RK3588, as well as multiple Mediatek and Qualcomm chips - SCMI firmware gains support for multiple SMC/HVC transport and version 3.2 of the protocol - Cleanups amd minor changes for the reset controller, memory controller, firmware and sram drivers - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm, amlogic and renesas SoC specific drivers" * tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits) dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding MAINTAINERS: add PHY-related files to Amlogic SoC file list drivers: meson: secure-pwrc: always enable DMA domain tee: optee: Use kmemdup() to replace kmalloc + memcpy soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer dt-bindings: sram: qcom,imem: document qdu1000 soc: qcom: icc-bwmon: Fix MSM8998 count unit dt-bindings: soc: qcom,rpmh-rsc: Require power-domains soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: Fix a IS_ERR() vs NULL bug in probe soc: qcom: socinfo: Add support for new fields in revision 19 soc: qcom: socinfo: Add support for new fields in revision 18 dt-bindings: firmware: scm: Add compatible for SDX75 soc: qcom: mdt_loader: Fix split image detection dt-bindings: memory-controllers: drop unneeded quotes soc: rockchip: dtpm: use C99 array init syntax firmware: tegra: bpmp: Add support for DRAM MRQ GSCs soc/tegra: pmc: Use devm_clk_notifier_register() soc/tegra: pmc: Simplify debugfs initialization ...
2023-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: dpaa2-mac: add 25gbase-r supportJosua Mayer
Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode. Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well as the 25000 mac capability. Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-08net: dpaa2: use pcs-lynx's check for fwnode availabilityRussell King (Oracle)
Use pcs-lynx's check rather than our own when determining if the device is available. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: dpaa2-mac: use lynx_pcs_create_fwnode()Russell King (Oracle)
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: dpaa2-mac: allow lynx PCS to manage mdiodev lifetimeRussell King (Oracle)
Put the mdiodev after lynx_pcs_create() so that the Lynx PCS driver can manage the lifetime of the mdiodev its using. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-30bus: fsl-mc: Make remove function return voidUwe Kleine-König
The value returned by an fsl-mc driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero and then device removal continues unconditionally.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2023-05-29net: dpaa2-mac: use correct interface to free mdiodevRussell King (Oracle)
Rather than using put_device(&mdiodev->dev), use the proper interface provided to dispose of the mdiodev - that being mdio_device_free(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/E1q2VsB-008QlZ-El@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dpaa2-mac: use Autoneg bit rather than an_enabledRussell King (Oracle)
The Autoneg bit in the advertising bitmap and state->an_enabled are always identical. Thus, we will be removing state->an_enabled. Use the Autoneg bit in the advertising bitmap to indicate whether autonegotiation should be used, rather than using the an_enabled member which will be going away. This means we use the same condition as phylink_mii_c22_pcs_config(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20net: dpaa2-eth: do not always set xsk support in xdp_features flagLorenzo Bianconi
Do not always add NETDEV_XDP_ACT_XSK_ZEROCOPY bit in xdp_features flag but check if the NIC really supports it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/3dba6ea42dc343a9f2d7d1a6a6a6c173235e1ebf.1676471386.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-27dpaa2-eth: execute xdp_do_flush() before napi_complete_done()Magnus Karlsson
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-07dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and ↵Yuan Can
dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove(). Fixes: 1110318d83e8 ("dpaa2-switch: add tc flower hardware offload on ingress traffic") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221205061515.115012-1-yuancan@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-mac: move rtnl_lock() only around phylink_{,dis}connect_phy()Vladimir Oltean
After the introduction of a private mac_lock that serializes access to priv->mac (and port_priv->mac in the switch), the only remaining purpose of rtnl_lock() is to satisfy the locking requirements of phylink_fwnode_phy_connect() and phylink_disconnect_phy(). But the functions these live in, dpaa2_mac_connect() and dpaa2_mac_disconnect(), have contradictory locking requirements. While phylink_fwnode_phy_connect() wants rtnl_lock() to be held, phylink_create() wants it to not be held. Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch drivers) to only surround the phylink calls that require it, in the dpaa2-mac library code. This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect() run unlocked, and there isn't any danger of an AB/BA deadlock between the rtnl_mutex and other private locks. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-switch: serialize changes to priv->mac with a mutexVladimir Oltean
The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth driver, so we need to duplicate the locking solution established by the previous change to the switch driver as well. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-eth: serialize changes to priv->mac with a mutexVladimir Oltean
The dpaa2 architecture permits dynamic connections between objects on the fsl-mc bus, specifically between a DPNI object (represented by a struct net_device) and a DPMAC object (represented by a struct phylink). The DPNI driver is notified when those connections are created/broken through the dpni_irq0_handler_thread() method. To ensure that ethtool operations, as well as netdev up/down operations serialize with the connection/disconnection of the DPNI with a DPMAC, dpni_irq0_handler_thread() takes the rtnl_lock() to block those other operations from taking place. There is code called by dpaa2_mac_connect() which wants to acquire the rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() -> sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite work out, even though it's fairly simple. Create a different strategy, where all code paths in the dpaa2-eth driver access priv->mac only while they are holding priv->mac_lock. The phylink instance is not created or connected to the PHY under the priv->mac_lock, but only assigned to priv->mac then. This will eliminate the reliance on the rtnl_mutex. Add lockdep annotations and put comments where holding the lock is not necessary, and priv->mac can be dereferenced freely. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-eth: connect to MAC before requesting the "endpoint changed" IRQVladimir Oltean
dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from dpni_irq0_handler_thread(). It could happen that the DPNI gets connected to a DPMAC on the fsl-mc bus exactly during probe, as soon as the "endpoint change" interrupt is requested in dpaa2_eth_setup_irqs(). This will cause the dpni_irq0_handler_thread() to register a phylink instance for that DPMAC. Then, the probing function will also try to register a phylink instance for the same DPMAC, operation which should fail (and this will fail the probing of the driver). Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that dpni_irq0_handler_thread() never races with the DPMAC-related portion of the probing path. Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of dpaa2_eth_connect_mac() in the teardown path. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-switch replace direct MAC access with dpaa2_switch_port_has_mac()Vladimir Oltean
The helper function will gain a lockdep annotation in a future patch. Make sure to benefit from it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2: publish MAC stringset to ethtool -S even if MAC is missingVladimir Oltean
DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S" unstructured counters. Those counters are only shown for the entity owning the netdev (DPNI, DPSW) if it's connected to a DPMAC. The ethtool stringset code path is split into multiple callbacks, but currently, connecting and disconnecting the DPMAC takes the rtnl_lock(). This blocks the entire ethtool code path from running, see ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() -> strset_prepare_data(). This is going to be a problem if we are going to no longer require rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC could appear between ops->get_sset_count() and ops->get_strings(). If it appears out of the blue, we will provide a stringset into an array that was dimensioned thinking the DPMAC wouldn't be there => array accessed out of bounds. There isn't really a good way to work around that, and I don't want to put too much pressure on the ethtool framework by playing locking games. Just make the DPMAC counters be always available. They'll be zeroes if the DPNI or DPSW isn't connected to a DPMAC. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-switch: assign port_priv->mac after dpaa2_mac_connect() callVladimir Oltean
The dpaa2-switch has the exact same locking requirements when connected to a DPMAC, so it needs port_priv->mac to always point either to NULL, or to a DPMAC with a fully initialized phylink instance. Make the same preparatory change in the dpaa2-switch driver as in the dpaa2-eth one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-eth: assign priv->mac after dpaa2_mac_connect() callVladimir Oltean
There are 2 requirements for correct code: - Any time the driver accesses the priv->mac pointer at runtime, it either holds NULL to indicate a DPNI-DPNI connection (or unconnected DPNI), or a struct dpaa2_mac whose phylink instance was fully initialized (created and connected to the PHY). No changes are made to priv->mac while it is being used. Currently, rtnl_lock() watches over the call to dpaa2_eth_connect_mac(), so it serves the purpose of serializing this with all readers of priv->mac. - dpaa2_mac_connect() should run unlocked, because inside it are 2 phylink calls with incompatible locking requirements: phylink_create() requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect() requires that the rtnl_mutex is held. The only way to solve those contradictory requirements is to let dpaa2_mac_connect() take rtnl_lock() when it needs to. To solve both requirements, we need to identify the writer side of the priv->mac pointer, which can be wrapped in a mutex private to the driver in a future patch. The dpaa2_mac_connect() cannot be part of the writer side critical section, because of an AB/BA deadlock with rtnl_lock(). So the strategy needs to be that where we prepare the DPMAC by calling dpaa2_mac_connect(), and only make priv->mac point to it once it's fully prepared. This ensures that the writer side critical section has the absolute minimum surface it can. The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code path. This makes sure that priv->mac is NULL when we start tearing down the DPMAC that we disconnected from, and concurrent code will simply not see it. No locking changes in this patch (concurrent code is still blocked by the rtnl_mutex). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-mac: remove defensive check in dpaa2_mac_disconnect()Vladimir Oltean
dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if dpaa2_mac_connect() failed, or was never called. The callers are these: dpaa2_eth_disconnect_mac(): if (dpaa2_eth_is_type_phy(priv)) dpaa2_mac_disconnect(priv->mac); dpaa2_switch_port_disconnect_mac(): if (dpaa2_switch_port_is_type_phy(port_priv)) dpaa2_mac_disconnect(port_priv->mac); priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns false, and dpaa2_mac_disconnect() is never called. Similar for dpaa2-switch. When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned zero (success), and therefore, priv->mac->phylink is also a valid pointer. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-mac: absorb phylink_start() call into dpaa2_mac_start()Vladimir Oltean
The phylink handling is intended to be hidden inside the dpaa2_mac object. Move the phylink_start() call into dpaa2_mac_start(), and phylink_stop() into dpaa2_mac_stop(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2: replace dpaa2_mac_is_type_fixed() with dpaa2_mac_is_type_phy()Vladimir Oltean
dpaa2_mac_is_type_fixed() is a header with no implementation and no callers, which is referenced from the documentation though. It can be deleted. On the other hand, it would be useful to reuse the code between dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common code should be called dpaa2_mac_is_type_phy(), so let's create that. The removal and the addition are merged into the same patch because, in fact, is_type_phy() is the logical opposite of is_type_fixed(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-01net: dpaa2-eth: don't use -ENOTSUPP error codeVladimir Oltean
dpaa2_eth_setup_dpni() is called from the probe path and dpaa2_eth_set_link_ksettings() is propagated to user space. include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3 protocol". Conventional wisdom has it to not use it in networking drivers. Replace it with -EOPNOTSUPP. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-30net: devlink: let the core report the driver name instead of the driversVincent Mailhol
The driver name is available in device_driver::name. Right now, drivers still have to report this piece of information themselves in their devlink_ops::info_get callback function. In order to factorize code, make devlink_nl_info_fill() add the driver name attribute. Now that the core sets the driver name attribute, drivers are not supposed to call devlink_info_driver_name_put() anymore. Remove devlink_info_driver_name_put() and clean-up all the drivers using this function in their callback. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Tested-by: Ido Schimmel <idosch@nvidia.com> # mlxsw Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: dpaa2: Remove linux/msi.h includesThomas Gleixner
Nothing in these file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-07net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_portJiri Pirko
Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-31net: dpaa2: Add some debug prints on deferred probeSean Anderson
When this device is deferred, there is often no way to determine what the cause was. Add some debug prints to make it easier to figure out what is blocking the probe. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20221027190005.400839-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net: dpaa2-eth: Simplify bool conversionYang Li
./drivers/net/ethernet/freescale/dpaa2/dpaa2-xsk.c:453:42-47: WARNING: conversion to bool not needed here Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2577 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221026051824.38730-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24net: dpaa2-eth: add trace points on XSK eventsRobert-Ionut Alexa
Define the dpaa2_tx_xsk_fd and dpaa2_rx_xsk_fd trace events for the XSK zero-copy Rx and Tx path. Also, define the dpaa2_eth_buf as an event class so that both dpaa2_eth_buf_seed and dpaa2_xsk_buf_seed traces can derive from the same class. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: AF_XDP TX zero copy supportRobert-Ionut Alexa
Add support in dpaa2-eth for packet processing on the Tx path using AF_XDP zero copy mode. The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx packets into the appropriate queue and update any necessary statistics. On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles creating a Scatter-Gather frame descriptor with only one data buffer. This is needed because otherwise we would need to impose a headroom in the Tx buffer to store our software annotation structures. This tactic is already used on the normal data path of the dpaa2-eth driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle functions in order to allocate and recycle the Scatter-Gather table buffers. In case we have reached the maximum number of Tx XSK packets to be sent in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be rescheduled again. On the XSK Tx confirmation path, we are just unmapping the SGT buffer and recycle it for further use. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: AF_XDP RX zero copy supportRobert-Ionut Alexa
This patch adds the support for receiving packets via the AF_XDP zero-copy mechanism in the dpaa2-eth driver. The support is available only on the LX2160A SoC and variants because we are relying on the HW capability to associate a buffer pool to a specific queue (QDBIN), only available on newer WRIOP versions. On the control path, the dpaa2_xsk_enable_pool() function is responsible to allocate a buffer pool (BP), setup this new BP to be used only on the requested queue and change the consume function to point to the XSK ZC one. We are forced to call dev_close() in order to change the queue to buffer pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our favor since at dev_close() the buffer pools will be drained and at the later dev_open() call they will be again seeded, this time with buffers allocated from the XSK pool if needed. On the data path, a new software annotation type is defined to be used only for the XSK scenarios. This will enable us to pass keep necessary information about a packet buffer between the moment in which it was seeded and when it's received by the driver. In the XSK case, we are keeping the associated xdp_buff. Depending on the action returned by the BPF program, we will do the following: - XDP_PASS: copy the contents of the packet into a brand new skb, recycle the initial buffer. - XDP_TX: just enqueue the same frame descriptor back into the Tx path, the buffer will get automatically released into the initial BP. - XDP_REDIRECT: call xdp_do_redirect() and exit. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: create and export the dpaa2_eth_receive_skb() functionRobert-Ionut Alexa
Carve out code from the dpaa2_eth_rx() function in order to create and export the dpaa2_eth_receive_skb() function. Do this in order to reuse this code also from the XSK path which will be introduced in a later patch. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: create and export the dpaa2_eth_alloc_skb functionRobert-Ionut Alexa
The dpaa2_eth_alloc_skb() function is added by moving code from the dpaa2_eth_copybreak() previously defined function. What the new API does is to allocate a new skb, copy the frame data from the passed FD to the new skb and then return the skb. Export this new function since we'll need the this functionality also from the XSK code path. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: use dev_close/open instead of the internal functionsIoana Ciornei
Instead of calling the internal functions which implement .ndo_stop and .ndo_open, we can simply call dev_close and dev_open, so that we keep the code cleaner. Also, in the next patches we'll use the same APIs from other files without needing to export the internal functions. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: update the dpni_set_pools() API to support per QDBIN poolsRobert-Ionut Alexa
Update the dpni_set_pool() firmware API so that in the next patches we can configure per Rx queue (per QDBIN) buffer pools. This is a hard requirement of the AF_XDP, thus we need the newer API version. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: export buffer pool info into a new debugfs fileIoana Ciornei
Export the allocated buffer pools, the number of buffers that they have currently and which channels are using which BP. The output looks like below: Buffer pool info for eth2: IDX BPID Buf count CH#0 CH#1 CH#2 CH#3 BP#0 1 5124 x x x x Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: export the CH#<index> in the 'ch_stats' debug fileIoana Ciornei
Just give out an index for each channel that we export into the debug file in the form of CH#<index>. This is purely to help corelate each channel information from one debugfs file to another one. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: add support for multiple buffer pools per DPNIRobert-Ionut Alexa
This patch allows the configuration of multiple buffer pools associated with a single DPNI object, each distinct DPBP object not necessarily shared among all queues. The user can interogate both the number of buffer pools and the buffer count in each buffer pool by using the .get_ethtool_stats() callback. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: rearrange variable in dpaa2_eth_get_ethtool_statsIoana Ciornei
Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so that we adhere to the reverse Christmas tree rule. Also, in the next patch we are adding more variables and I didn't know where to place them with the current ordering. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: dpaa2-eth: add support to query the number of queues through ethtoolRobert-Ionut Alexa
The .get_channels() ethtool_ops callback is implemented and exports the number of queues: Rx, Tx, Tx conf and Rx err. The last two ones, Tx confirmation and Rx err, are counted as 'others'. The .set_channels() callback is not implemented since the DPAA2 software/firmware architecture does not allow the dynamic reconfiguration of the number of queues. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11dpaa2-eth: trace the allocated address instead of page structChen Lin
We should trace the allocated address instead of page struct. Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-22dpaa2-eth: unmap the SGT buffer before accessing its contentsIoana Ciornei
DMA unmap the Scatter/Gather table before going through the array to unmap and free each of the header and data chunks. This is so we do not touch the data between the dma_map and dma_unmap calls. Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22dpaa2-eth: use the correct software annotation fieldIoana Ciornei
The incorrect software annotation field was being used, swa->sg.sgt_size instead of swa->tso.sgt_size, which meant that the SGT buffer was unmapped with a wrong size. This is also confirmed by the DMA API debug prints which showed the following: [ 38.962434] DMA-API: fsl_dpaa2_eth dpni.2: device driver frees DMA memory with different size [device address=0x0000fffffafba740] [map size=224 bytes] [unmap size=0 bytes] [ 38.980496] WARNING: CPU: 11 PID: 1131 at kernel/dma/debug.c:973 check_unmap+0x58c/0x9b0 [ 38.988586] Modules linked in: [ 38.991631] CPU: 11 PID: 1131 Comm: iperf3 Not tainted 5.18.0-rc7-00117-g59130eeb2b8f #1972 [ 38.999970] Hardware name: NXP Layerscape LX2160ARDB (DT) Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-29 16:54:13 +0000