summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/fec.h
AgeCommit message (Collapse)Author
2023-04-05net: fec: make use of MDIO C45 quirkGreg Ungerer
Not all fec MDIO bus drivers support C45 mode transactions. The older fec hardware block in many ColdFire SoCs does not appear to support them, at least according to most of the different ColdFire SoC reference manuals. The bits used to generate C45 access on the iMX parts, in the OP field of the MMFR register, are documented as generating non-compliant MII frames (it is not documented as to exactly how they are non-compliant). Commit 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions") means the fec driver will always register c45 MDIO read and write methods. During probe these will always be accessed now generating non-compliant MII accesses on ColdFire based devices. Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to distinguish silicon that supports MDIO C45 framing or not. Add this to all the existing iMX quirks, so they will be behave as they do now (*). (*) it seems that some iMX parts may not support C45 transactions either. The iMX25 and iMX50 Reference Manuals contain similar wording to the ColdFire Reference Manuals on this. Fixes: 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-14net: fec: add xdp and page pool statisticsShenwei Wang
Added xdp and page pool statistics. In order to make the implementation simple and compatible, the patch uses the 32bit integer to record the XDP statistics. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-03net: fec: add initial XDP supportShenwei Wang
This patch adds the initial XDP support to Freescale driver. It supports XDP_PASS, XDP_DROP and XDP_REDIRECT actions. Upcoming patches will add support for XDP_TX and Zero Copy features. As the patch is rather large, the part of codes to collect the statistics is separated and will prepare a dedicated patch for that part. I just tested with the application of xdpsock. -- Native here means running command of "xdpsock -i eth0" -- SKB-Mode means running command of "xdpsock -S -i eth0" The following are the testing result relating to XDP mode: root@imx8qxpc0mek:~/bpf# ./xdpsock -i eth0 sock0@eth0:0 rxdrop xdp-drv pps pkts 1.00 rx 371347 2717794 tx 0 0 root@imx8qxpc0mek:~/bpf# ./xdpsock -S -i eth0 sock0@eth0:0 rxdrop xdp-skb pps pkts 1.00 rx 202229 404528 tx 0 0 root@imx8qxpc0mek:~/bpf# ./xdp2 eth0 proto 0: 496708 pkt/s proto 0: 505469 pkt/s proto 0: 505283 pkt/s proto 0: 505443 pkt/s proto 0: 505465 pkt/s root@imx8qxpc0mek:~/bpf# ./xdp2 -S eth0 proto 0: 0 pkt/s proto 17: 118778 pkt/s proto 17: 118989 pkt/s proto 0: 1 pkt/s proto 17: 118987 pkt/s proto 0: 0 pkt/s proto 17: 118943 pkt/s proto 17: 118976 pkt/s proto 0: 1 pkt/s proto 17: 119006 pkt/s proto 0: 0 pkt/s proto 17: 119071 pkt/s proto 17: 119092 pkt/s Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221031185350.2045675-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-24net: fec: Add support for periodic output signal of PPSWei Fang
This patch adds the support for configuring periodic output signal of PPS. So the PPS can be output at a specified time and period. For developers or testers, they can use the command "echo <channel> <start.sec> <start.nsec> <period.sec> <period. nsec> > /sys/class/ptp/ptp0/period" to specify time and period to output PPS signal. Notice that, the channel can only be set to 0. In addtion, the start time must larger than the current PTP clock time. So users can use the command "phc_ctl /dev/ptp0 -- get" to get the current PTP clock time before. Signed-off-by: Wei Fang <wei.fang@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"Francesco Dolcini
This reverts commit b353b241f1eb9b6265358ffbe2632fdcb563354f, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Link: https://lore.kernel.org/all/20220907143915.5w65kainpykfobte@pengutronix.de/ Fixes: b353b241f1eb ("net: fec: Use a spinlock to guard `fep->ptp_clk_on`") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20Revert "fec: Restart PPS after link state change"Francesco Dolcini
This reverts commit f79959220fa5fbda939592bf91c7a9ea90419040, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/20220905180542.GA3685102@roeck-us.net/ Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-16net: fec: add pm runtime force suspend and resume supportWei Fang
Force mii bus into runtime pm suspend state during device suspends, since phydev state is already PHY_HALTED, and there is no need to access mii bus during device suspend state. Then force mii bus into runtime pm resume state when device resumes. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-03net: fec: add stop mode support for imx8 platformWei Fang
The current driver support stop mode by calling machine api. The patch add dts support to set GPR register for stop request. imx8mq enter stop/exit stop mode by setting GPR bit, which can be accessed by A core. imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that communicate with M core ipc service, and the M core set the related GPR bit at last. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net: fec: Use a spinlock to guard `fep->ptp_clk_on`Csókás Bence
Mutexes cannot be taken in a non-preemptible context, causing a panic in `fec_ptp_save_state()`. Replacing `ptp_clk_mutex` by `tmreg_lock` fixes this. Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled") Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/ Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6 Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: fec: add pm_qos support on imx6q platformWei Fang
There is a very low probability that tx timeout will occur during suspend and resume stress test on imx6q platform. So we add pm_qos support to prevent system from entering low level idles which may affect the transmission of tx. Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24fec: Restart PPS after link state changeCsókás Bence
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers. Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()` Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-07net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang
Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13net: fec: add WoL support for i.MX8MQJoakim Zhang
By default FEC driver treat irq[0] (i.e. int0 described in dt-binding) as wakeup interrupt, but this situation changed on i.MX8M serials, SoC integration guys mix wakeup interrupt signal into int2 interrupt line. This patch introduces FEC_QUIRK_WAKEUP_FROM_INT2 to indicate int2 as wakeup interrupt for i.MX8MQ. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20210812070948.25797-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09net: fec: fix build error for ARCH m68kJoakim Zhang
reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross make.cross ARCH=m68k m5272c3_defconfig make.cross ARCH=m68k drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_eee_mode_set': >> drivers/net/ethernet/freescale/fec_main.c:2758:33: error: 'FEC_LPI_SLEEP' undeclared (first use in this function); did you mean 'FEC_ECR_SLEEP'? 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ drivers/net/ethernet/freescale/fec_main.c:2758:33: note: each undeclared identifier is reported only once for each function it appears in 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ >> drivers/net/ethernet/freescale/fec_main.c:2759:32: error: 'FEC_LPI_WAKE' undeclared (first use in this function) 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2759:2: note: in expansion of macro 'writel' 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~ This patch adds register definition for M5272 platform to pass build. Fixes: b82f8c3f1409 ("net: fec: add eee mode tx lpi support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add MAC internal delayed clock feature supportFugang Duan
i.MX8QM ENET IP version support timing specification that MAC integrate clock delay in RGMII mode, the delayed TXC/RXC as an alternative option to work well with various PHYs. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add eee mode tx lpi supportFugang Duan
The i.MX8MQ ENET version support IEEE802.3az eee mode, add eee mode tx lpi enable to support ethtool interface. usage: 1. set sleep and wake timer to 5ms: ethtool --set-eee eth0 eee on tx-lpi on tx-timer 5000 2. check the eee mode: ~# ethtool --show-eee eth0 EEE Settings for eth0: EEE status: enabled - active Tx LPI: 5000 (us) Supported EEE link modes: 100baseT/Full 1000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full Link partner advertised EEE link modes: 100baseT/Full Note: For realtime case and IEEE1588 ptp case, it should disable EEE mode. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-28net: fec: add imx8mq and imx8qm new versions supportFugang Duan
The ENET of imx8mq and imx8qm are basically the same as imx6sx, but they have new features support based on imx6sx, like: - imx8mq: supports IEEE 802.3az EEE standard. - imx8qm: supports RGMII mode delayed clock. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21net: fec: add FEC_QUIRK_HAS_MULTI_QUEUES represents i.MX6SX ENET IPJoakim Zhang
Frieder Schrempf reported a TX throuthput issue [1], it happens quite often that the measured bandwidth in TX direction drops from its expected/nominal value to something like ~50% (for 100M) or ~67% (for 1G) connections. [1] https://lore.kernel.org/linux-arm-kernel/421cc86c-b66f-b372-32f7-21e59f9a98bc@kontron.de/ The issue becomes clear after digging into it, Net core would select queues when transmitting packets. Since FEC have not impletemented ndo_select_queue callback yet, so it will call netdev_pick_tx to select queues randomly. For i.MX6SX ENET IP with AVB support, driver default enables this feature. According to the setting of QOS/RCMRn/DMAnCFG registers, AVB configured to Credit-based scheme, 50% bandwidth of each queue 1&2. With below tests let me think more: 1) With FEC_QUIRK_HAS_AVB quirk, can reproduce TX bandwidth fluctuations issue. 2) Without FEC_QUIRK_HAS_AVB quirk, can't reproduce TX bandwidth fluctuations issue. The related difference with or w/o FEC_QUIRK_HAS_AVB quirk is that, whether we program FTYPE field of TxBD or not. As I describe above, AVB feature is enabled by default. With FEC_QUIRK_HAS_AVB quirk, frames in queue 0 marked as non-AVB, and frames in queue 1&2 marked as AVB Class A&B. It's unreasonable if frames in queue 1&2 are not required to be time-sensitive. So when Net core select tx queues ramdomly, Credit-based scheme would work and lead to TX bandwidth fluctuated. On the other hand, w/o FEC_QUIRK_HAS_AVB quirk, frames in queue 1&2 are all marked as non-AVB, so Credit-based scheme would not work. Till now, how can we fix this TX throughput issue? Yes, please remove FEC_QUIRK_HAS_AVB quirk if you suffer it from time-nonsensitive networking. However, this quirk is used to indicate i.MX6SX, other setting depends on it. So this patch adds a new quirk FEC_QUIRK_HAS_MULTI_QUEUES to represent i.MX6SX, it is safe for us remove FEC_QUIRK_HAS_AVB quirk now. FEC_QUIRK_HAS_AVB quirk is set by default in the driver, and users may not know much about driver details, they would waste effort to find the root cause, that is not we want. The following patch is a implementation to fix it and users don't need to modify the driver. Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-26net: fec: Fix temporary RMII clock reset on link upLaurent Badel
fec_restart() does a hard reset of the MAC module when the link status changes to up. This temporarily resets the R_CNTRL register which controls the MII mode of the ENET_OUT clock. In the case of RMII, the clock frequency momentarily drops from 50MHz to 25MHz until the register is reconfigured. Some link partners do not tolerate this glitch and invalidate the link causing failure to establish a stable link when using PHY polling mode. Since as per IEEE802.3 the criteria for link validity are PHY-specific, what the partner should tolerate cannot be assumed, so avoid resetting the MII clock by using software reset instead of hardware reset when the link is up. This is generally relevant only if the SoC provides the clock to an external PHY and the PHY is configured for RMII. Signed-off-by: Laurent Badel <laurentbadel@eaton.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: fec: fix MDIO probing for some FEC hardware blocksGreg Ungerer
Some (apparently older) versions of the FEC hardware block do not like the MMFR register being cleared to avoid generation of MII events at initialization time. The action of clearing this register results in no future MII events being generated at all on the problem block. This means the probing of the MDIO bus will find no PHYs. Create a quirk that can be checked at the FECs MII init time so that the right thing is done. The quirk is set as appropriate for the FEC hardware blocks that are known to need this. Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Fugang Duan <fugand.duan@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Link: https://lore.kernel.org/r/20201028052232.1315167-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: fec: fix hardware time stamping by external devicesSergey Organov
Fix support for external PTP-aware devices such as DSA or PTP PHY: Make sure we never time stamp tx packets when hardware time stamping is disabled. Check for PTP PHY being in use and then pass ioctls related to time stamping of Ethernet packets to the PTP PHY rather than handle them ourselves. In addition, disable our own hardware time stamping in this case. Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-07net: ethernet: fec: prevent tx starvation under high rx loadTobias Waldekranz
In the ISR, we poll the event register for the queues in need of service and then enter polled mode. After this point, the event register will never be read again until we exit polled mode. In a scenario where a UDP flow is routed back out through the same interface, i.e. "router-on-a-stick" we'll typically only see an rx queue event initially. Once we start to process the incoming flow we'll be locked polled mode, but we'll never clean the tx rings since that event is never caught. Eventually the netdev watchdog will trip, causing all buffers to be dropped and then the process starts over again. Rework the NAPI poll to keep trying to consome the entire budget as long as new events are coming in, making sure to service all rx/tx queues, in priority order, on each pass. Fixes: 4d494cdc92b3 ("net: fec: change data structure to support multiqueue") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: ethernet: fec: Replace interrupt driven MDIO with polled IOAndrew Lunn
Measurements of the MDIO bus have shown that driving the MDIO bus using interrupts is slow. Back to back MDIO transactions take about 90us, with 25us spent performing the transaction, and the remainder of the time the bus is idle. Replacing the completion interrupt with polled IO results in back to back transactions of 40us. The polling loop waiting for the hardware to complete the transaction takes around 28us. Which suggests interrupt handling has an overhead of 50us, and polled IO nearly halves this overhead, and doubles the MDIO performance. Care has to be taken when setting the MII_SPEED register, or it can trigger an MII event> That then upsets the polling, due to an unexpected pending event. Suggested-by: Chris Heally <cphealy@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: ethernet: fec: Revert "net: ethernet: fec: Replace interrupt driven ↵Fugang Duan
MDIO with polled IO" This reverts commit 29ae6bd1b0d8a57d7c00ab12cbb949fc41986eef. The commit breaks ethernet function on i.MX6SX, i.MX7D, i.MX8MM, i.MX8MQ, and i.MX8QXP platforms. Boot yocto system by NFS mounting rootfs will be failed with the commit. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: ethernet: fec: Replace interrupt driven MDIO with polled IOAndrew Lunn
Measurements of the MDIO bus have shown that driving the MDIO bus using interrupts is slow. Back to back MDIO transactions take about 90us, with 25us spent performing the transaction, and the remainder of the time the bus is idle. Replacing the completion interrupt with polled IO results in back to back transactions of 40us. The polling loop waiting for the hardware to complete the transaction takes around 28us. Which suggests interrupt handling has an overhead of 50us, and polled IO nearly halves this overhead, and doubles the MDIO performance. Suggested-by: Chris Heally <cphealy@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: fec: set GPR bit on suspend by DT configuration.Martin Fuzzey
On some SoCs, such as the i.MX6, it is necessary to set a bit in the SoC level GPR register before suspending for wake on lan to work. The fec platform callback sleep_mode_enable was intended to allow this but the platform implementation was NAK'd back in 2015 [1] This means that, currently, wake on lan is broken on mainline for the i.MX6 at least. So implement the required bit setting in the fec driver by itself by adding a new optional DT property indicating the GPR register and adding the offset and bit information to the driver. [1] https://www.spinics.net/lists/netdev/msg310922.html Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24freescale: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: fec: remove workaround to restart phylib state machine on MDIO timeoutHeiner Kallweit
There's a workaround to restart the phylib state machine in case of a MDIO access timeout. Seems it was introduced to deal with the consequences of a too small MDIO timeout. See also commit message of c3b084c24c8a ("net: fec: Adjust ENET MDIO timeouts") which increased the timeout value later. Due to the later timeout value fix it seems to be safe to remove the workaround. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15net: fec: don't dump RX FIFO register when not availableFugang Duan
Commit db65f35f50e0 ("net: fec: add support of ethtool get_regs") introduce ethool "--register-dump" interface to dump all FEC registers. But not all silicon implementations of the Freescale FEC hardware module have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start Register) register, so we should not be trying to dump them on those that don't. To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before dump those RX FIFO registers. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17net: ethernet: freescale: Allow FEC with COMPILE_TESTFlorian Fainelli
The Freescale FEC driver builds fine with COMPILE_TEST, so make that possible. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: fec: add necessary defines to work on ARM64Lucas Stach
The i.MX8 is a ARMv8 based SoC, that uses the same FEC IP as the earlier, ARMv7 based, i.MX SoCs. Allow the driver to work on ARM64. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: fec: Let fec_ptp have its own interrupt routineTroy Kisky
This is better for code locality and should slightly speed up normal interrupts. This also allows PPS clock output to start working for i.mx7. This is because i.mx7 was already using the limit of 3 interrupts, and needed another. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20net: fec: remove unused interrupt FEC_ENET_TS_TIMERTroy Kisky
FEC_ENET_TS_TIMER is not checked in the interrupt routine so there is no need to enable it. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: fec: Clear and enable MIB counters on imx51Andrew Lunn
Both the IMX51 and IMX53 datasheet indicates that the MIB counters should be cleared during setup. Otherwise random numbers are returned via ethtool -S. Add a quirk and a function to do this. Tested on an IMX51. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: fec: cache statistics while device is downNikita Yushchenko
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid board: Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200 pgd = ddecc000 [e0898200] *pgd=9e406811, *pte=400d1653, *ppte=400d1453 Internal error: : 1008 [#1] SMP ARM ... Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec registers while IPG clock is stopped by PM. Fix that by caching statistics in fec_enet_private. Cache is initialized at device probe time, and updated at statistics request time if device is up, and also just before turning device off on down path. Additional locking is not needed, since cached statistics is accessed either before device is registered, or under rtnl_lock(). Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
2016-06-27net: fec: add interrupt coalesc quirk flagFugang Duan
Different i.MX SOC FEC support different features like : - i.MX6Q/DL FEC does not support AVB and interrupt coalesc - i.MX6SX/i.MX7D supports AVB and interrupt coalesc - i.MX6UL/ULL does not support AVB, but support interrupt coalesc So, add new quirk flag to judge the supported features. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-12ARM: imx6: disable deeper idle states when FEC is active w/o HW workaroundLucas Stach
The i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the CPUs when they are in wait(unclocked) state. As the hardware workaround isn't applicable to all boards, disable the deeper idle state when the workaround isn't present and the FEC is in use. This allows to safely run a kernel with CPUidle enabled on all i.MX6 boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net> (for network changes) Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-05-10net: ethernet: fec: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: fec: don't disable FEC_ENET_TS_TIMER interruptTroy Kisky
Only the interrupt routine processes this condition. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: fec: add variable reg_desc_active to speed things upTroy Kisky
There is no need for complex macros every time we need to activate a queue. Also, no need to call skb_get_queue_mapping when we already know which queue it is using. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: fec: add struct bufdesc_propTroy Kisky
This reduces code and gains speed. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11net: fec: stop the "rcv is not +last, " error messagesTroy Kisky
Setting the FTRL register will stop the fec from trying to use multiple receive buffers. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: use CONFIG_ARM instead of CONFIG_ARCH_MXC/SOC_IMX28Johannes Berg
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28 is wrong if some other ARM platform uses this device - the operation of the driver would depend on an unrelated ARM platform that might or might not be set for multi-platform kernels. Prior to my previous patch, any other platforms using it would have been broken already due to having the cbd_datlen/cbd_sc fields in the wrong order, but byte ordering correctly, so no such platforms can exist and work today. In any case, it seems likely that only Freescale SoCs use this part, and those are little-endian on ARM, so CONFIG_ARM is safe for them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: fec: make driver endian-safeJohannes Berg
The driver treats the device descriptors as CPU-endian, which appears to be correct with the default endianness on both ARM (typically LE) and PowerPC (typically BE) SoCs, indicating that the hardware block is generated differently. Add endianness annotations and byteswaps as necessary. It's not clear that the ifdef there really is correct and shouldn't just be #ifdef CONFIG_ARM, but I also can't test on anything but the i.MX6 HummingBoard where this gets it working with a BE kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26net: fec: introduce fec_ptp_stop and use in probe fail pathLucas Stach
This function frees resources and cancels delayed work item that have been initialized in fec_ptp_init(). Use this to do proper error handling if something goes wrong in probe function after fec_ptp_init has been called. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-28 02:44:01 +0000