summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-09Merge tag 'mm-stable-2024-01-08-15-31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Peng Zhang has done some mapletree maintainance work in the series 'maple_tree: add mt_free_one() and mt_attr() helpers' 'Some cleanups of maple tree' - In the series 'mm: use memmap_on_memory semantics for dax/kmem' Vishal Verma has altered the interworking between memory-hotplug and dax/kmem so that newly added 'device memory' can more easily have its memmap placed within that newly added memory. - Matthew Wilcox continues folio-related work (including a few fixes) in the patch series 'Add folio_zero_tail() and folio_fill_tail()' 'Make folio_start_writeback return void' 'Fix fault handler's handling of poisoned tail pages' 'Convert aops->error_remove_page to ->error_remove_folio' 'Finish two folio conversions' 'More swap folio conversions' - Kefeng Wang has also contributed folio-related work in the series 'mm: cleanup and use more folio in page fault' - Jim Cromie has improved the kmemleak reporting output in the series 'tweak kmemleak report format'. - In the series 'stackdepot: allow evicting stack traces' Andrey Konovalov to permits clients (in this case KASAN) to cause eviction of no longer needed stack traces. - Charan Teja Kalla has fixed some accounting issues in the page allocator's atomic reserve calculations in the series 'mm: page_alloc: fixes for high atomic reserve caluculations'. - Dmitry Rokosov has added to the samples/ dorectory some sample code for a userspace memcg event listener application. See the series 'samples: introduce cgroup events listeners'. - Some mapletree maintanance work from Liam Howlett in the series 'maple_tree: iterator state changes'. - Nhat Pham has improved zswap's approach to writeback in the series 'workload-specific and memory pressure-driven zswap writeback'. - DAMON/DAMOS feature and maintenance work from SeongJae Park in the series 'mm/damon: let users feed and tame/auto-tune DAMOS' 'selftests/damon: add Python-written DAMON functionality tests' 'mm/damon: misc updates for 6.8' - Yosry Ahmed has improved memcg's stats flushing in the series 'mm: memcg: subtree stats flushing and thresholds'. - In the series 'Multi-size THP for anonymous memory' Ryan Roberts has added a runtime opt-in feature to transparent hugepages which improves performance by allocating larger chunks of memory during anonymous page faults. - Matthew Wilcox has also contributed some cleanup and maintenance work against eh buffer_head code int he series 'More buffer_head cleanups'. - Suren Baghdasaryan has done work on Andrea Arcangeli's series 'userfaultfd move option'. UFFDIO_MOVE permits userspace heap compaction algorithms to move userspace's pages around rather than UFFDIO_COPY'a alloc/copy/free. - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm: Add ksm advisor'. This is a governor which tunes KSM's scanning aggressiveness in response to userspace's current needs. - Chengming Zhou has optimized zswap's temporary working memory use in the series 'mm/zswap: dstmem reuse optimizations and cleanups'. - Matthew Wilcox has performed some maintenance work on the writeback code, both code and within filesystems. The series is 'Clean up the writeback paths'. - Andrey Konovalov has optimized KASAN's handling of alloc and free stack traces for secondary-level allocators, in the series 'kasan: save mempool stack traces'. - Andrey also performed some KASAN maintenance work in the series 'kasan: assorted clean-ups'. - David Hildenbrand has gone to town on the rmap code. Cleanups, more pte batching, folio conversions and more. See the series 'mm/rmap: interface overhaul'. - Kinsey Ho has contributed some maintenance work on the MGLRU code in the series 'mm/mglru: Kconfig cleanup'. - Matthew Wilcox has contributed lruvec page accounting code cleanups in the series 'Remove some lruvec page accounting functions'" * tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits) mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER mm, treewide: introduce NR_PAGE_ORDERS selftests/mm: add separate UFFDIO_MOVE test for PMD splitting selftests/mm: skip test if application doesn't has root privileges selftests/mm: conform test to TAP format output selftests: mm: hugepage-mmap: conform to TAP format output selftests/mm: gup_test: conform test to TAP format output mm/selftests: hugepage-mremap: conform test to TAP format output mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large mm/memcontrol: remove __mod_lruvec_page_state() mm/khugepaged: use a folio more in collapse_file() slub: use a folio in __kmalloc_large_node slub: use folio APIs in free_large_kmalloc() slub: use alloc_pages_node() in alloc_slab_page() mm: remove inc/dec lruvec page state functions mm: ratelimit stat flush from workingset shrinker kasan: stop leaking stack trace handles mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE mm/mglru: add dummy pmd_dirty() ...
2024-01-08mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDERKirill A. Shutemov
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has changed the definition of MAX_ORDER to be inclusive. This has caused issues with code that was not yet upstream and depended on the previous definition. To draw attention to the altered meaning of the define, rename MAX_ORDER to MAX_PAGE_ORDER. Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-08net: Convert some ethtool_sprintf() to ethtool_puts()justinstitt@google.com
This patch converts some basic cases of ethtool_sprintf() to ethtool_puts(). The conversions are used in cases where ethtool_sprintf() was being used with just two arguments: | ethtool_sprintf(&data, buffer[i].name); or when it's used with format string: "%s" | ethtool_sprintf(&data, "%s", buffer[i].name); which both now become: | ethtool_puts(&data, buffer[i].name); Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-06net: hns: fix fake link up on xge portYonglong Liu
If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-06net: hns: fix wrong head when modify the tx feature when sending packetsYonglong Liu
Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05net: hns3: reduce stack usage in hclge_dbg_dump_tm_pri()Arnd Bergmann
This function exceeds the stack frame warning limit: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pri': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:1039:1: error: the frame size of 1408 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Use dynamic allocation for the largest stack object instead. It would be nice to rewrite this file to completely avoid the extra buffer and just use the one that was already allocated by debugfs, but that is a much larger change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231204085735.4112882-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-13net: hns3: fix VF wrong speed and duplex issueJijie Shao
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode when PF queries the port information from firmware. After imp reset command is executed, PF status changes to down, and PF will query link status and updates port information from firmware in a periodic scheduled task. However, there is a low probability that port information is updated when PF is down, and then PF link status changes to up. In this case, PF synchronizes incorrect rate and duplex mode to VF. This patch fixes it by updating port information before PF synchronizes the rate and duplex to the VF when PF changes to up. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix VF reset fail issueJijie Shao
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. We think firmware watchdog initialization is completed before VF clear the interrupt source. However, firmware initialization may not complete early. So VF will receive multiple reset interrupts and fail to reset. So we add delay before VF interrupt source and 5 ms delay is enough to avoid second reset interrupt. Fixes: 427900d27d86 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix variable may not initialized problem in hns3_init_mac_addr()Yonglong Liu
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix out-of-bounds access may occur when coalesce info is read via ↵Yonglong Liu
debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. Fixes: c99fead7cb07 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix incorrect capability bit display for copper portJian Shen
Currently, the FEC capability bit is default set for device version V2. It's incorrect for the copper port. Eventhough it doesn't make the nic work abnormal, but the capability information display in debugfs may confuse user. So clear it when driver get the port type inforamtion. Fixes: 433ccce83504 ("net: hns3: use FEC capability queried from firmware") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: add barrier in vf mailbox reply processYonglong Liu
In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions, there is a typical store-store and load-load scenario between received_resp and additional_info. This patch adds barrier to fix the problem. Fixes: 4671042f1ef0 ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-13net: hns3: fix add VLAN fail issueJian Shen
The hclge_sync_vlan_filter is called in periodic task, trying to remove VLAN from vlan_del_fail_bmap. It can be concurrence with VLAN adding operation from user. So once user failed to delete a VLAN id, and add it again soon, it may be removed by the periodic task, which may cause the software configuration being inconsistent with hardware. So add mutex handling to avoid this. user hns3 driver periodic task │ add vlan 10 ───── hns3_vlan_rx_add_vid │ │ (suppose success) │ │ │ del vlan 10 ───── hns3_vlan_rx_kill_vid │ │ (suppose fail,add to │ │ vlan_del_fail_bmap) │ │ │ add vlan 10 ───── hns3_vlan_rx_add_vid │ (suppose success) │ foreach vlan_del_fail_bmp del vlan 10 Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25net: hns3: add some link modes for hisilicon deviceHao Chen
Add HCLGE_SUPPORT_50G_R1_BIT and HCLGE_SUPPORT_100G_R2_BIT two capability bits and Corresponding link modes. Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> CC: Lorenzo Bianconi <lorenzo@kernel.org> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Liang Chen <liangchen.linux@gmail.com> CC: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-13net: ethernet: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11net: hns3: add vf fault detect supportJie Wang
Currently hns3 driver supports vf fault detect feature. Several ras caused by VF resources don't need to do PF function reset for recovery. The driver only needs to reset the specified VF. So this patch adds process in ras module. New process will get detailed information about ras and do the most correct measures based on these accurate information. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20231007031215.1067758-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-11net: hns3: add hns3 vf fault detect cap bit supportJie Wang
Currently hns3 driver is designed to support VF fault detect feature in new hardwares. For code compatibility, vf fault detect cap bit is added to the driver. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20231007031215.1067758-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-02net: hisilicon: Annotate struct rcb_common_cb with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct rcb_common_cb. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922172858.3822653-6-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-02net: hns: Annotate struct ppe_common_cb with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct ppe_common_cb. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20230922172858.3822653-4-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-20net: ethernet: hisilicon: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-19net: hns3: add 5ms delay before clear firmware reset irq sourceJie Wang
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. we think firmware watchdog initialization is completed before hns3 clear the firmware interrupt source. However, firmware initialization may not complete early. so we add delay before hns3 clear firmware interrupt source and 5 ms delay is enough to avoid second firmware reset interrupt. Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: fix fail to delete tc flower rules during reset issueJijie Shao
Firmware does not respond driver commands during reset Therefore, rule will fail to delete while the firmware is resetting So, if failed to delete rule, set rule state to TO_DEL, and the rule will be deleted when periodic task being scheduled. Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: only enable unicast promisc when mac table fullJian Shen
Currently, the driver will enable unicast promisc for the function once configure mac address fail. It's unreasonable when the failure is caused by using same mac address with other functions. So only enable unicast promisc when mac table full. Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: fix GRE checksum offload issueJie Wang
The device_version V3 hardware can't offload the checksum for IP in GRE packets, but can do it for NvGRE. So default to disable the checksum and GSO offload for GRE, but keep the ability to enable it when only using NvGRE. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: add cmdq check for vf periodic service taskJie Wang
When the vf cmdq is disabled, there is no need to keep these task running. So this patch skip these task when the cmdq is disabled. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: remove GSO partial feature bitJie Wang
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel packets for example NvGRE packets segment offload and checksum offload is already supported. There is no need to keep gso partial feature bit. So this patch removes it. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: fix the port information display when sfp is absentYisen Zhuang
When sfp is absent or unidentified, the port type should be displayed as PORT_OTHERS, rather than PORT_FIBRE. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: fix invalid mutex between tc qdisc and dcb ets command issueJijie Shao
We hope that tc qdisc and dcb ets commands can not be used crosswise. If we want to use any of the commands to configure tc, We must use the other command to clear the existing configuration. However, when we configure a single tc with tc qdisc, we can still configure it with dcb ets. Because we use mqprio_active as the tag of tc qdisc configuration, but with dcb ets, we do not check mqprio_active. This patch fix this issue by check mqprio_active before executing the dcb ets command. and add dcb_ets_active to replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE at the hclge layer, Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: fix debugfs concurrency issue between kfree buffer and readHao Chen
Now in hns3_dbg_uninit(), there may be concurrency between kfree buffer and read, it may result in memory error. Moving debugfs_remove_recursive() in front of kfree buffer to ensure they don't happen at the same time. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()Hao Chen
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as (u32 *) without considerring byte order conversion, it may result in printing wrong data for tcam_data. Convert tcam_data to (__le32 *) first to fix it. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: Support query tx timeout threshold by debugfsJijie Shao
support query tx timeout threshold by debugfs Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07net: hns3: fix tx timeout issueJian Shen
Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2679c ("net: hns3: optimize the tx clean process") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-16net: hns3: fix wrong rpu tln reg issueJijie Shao
In the original RPU query command, the status register values of multiple RPU tunnels are accumulated by default, which is unreasonable. This patch Fix it by querying the specified tunnel ID. The tunnel number of the device can be obtained from firmware during initialization. Fixes: ddb54554fa51 ("net: hns3: add DFX registers information for ethtool -d") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16net: hns3: Support tlv in regs data for HNS3 VF driverJijie Shao
The dump register function is being refactored. The third step in refactoring is to support tlv info in regs data for HNS3 PF driver. Currently, if we use "ethtool -d" to dump regs value, the output is as follows: offset1: 00 01 02 03 04 05 ... offset2：10 11 12 13 14 15 ... ...... We can't get the value of a register directly. This patch deletes the original separator information and add tag_len_value information in regs data. ethtool can parse register data in key-value format by -d command. a patch will be added to the ethtool to parse regs data in the following format: reg1 : value2 reg2 : value2 ...... Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16net: hns3: Support tlv in regs data for HNS3 PF driverJijie Shao
The dump register function is being refactored. The second step in refactoring is to support tlv info in regs data for HNS3 PF driver. Currently, if we use "ethtool -d" to dump regs value, the output is as follows: offset1: 00 01 02 03 04 05 ... offset2：10 11 12 13 14 15 ... ...... We can't get the value of a register directly. This patch deletes the original separator information and add tag_len_value information in regs data. ethtool can parse register data in key-value format by -d command. a patch will be added to the ethtool to parse regs data in the following format: reg1 : value2 reg2 : value2 ...... Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16net: hns3: move dump regs function to a separate fileJijie Shao
The dump register function is being refactored. The first step in refactoring is put the dump regs function into a separate file. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10net: hns3: fix strscpy causing content truncation issueHao Chen
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some items to a string for content, and we add '\n' and '\0' in the last two bytes of content. strscpy() will add '\0' in the last byte of destination buffer(one of items), it result in finishing content print ahead of schedule and some dump content truncation. One Error log shows as below: cat mac_list/uc UC MAC_LIST: Expected: UC MAC_LIST: FUNC_ID MAC_ADDR STATE pf 00:2b:19:05:03:00 ACTIVE The destination buffer is length-bounded and not required to be NUL-terminated, so just change strscpy() to memcpy() to fix it. Fixes: 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue") Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-08net: hns3: fix deadlock issue when externel_lb and reset are executed togetherYonglong Liu
When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). Fixes: 04b6ba143521 ("net: hns3: add support for external loopback test") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-08net: hns3: add wait until mac link downJie Wang
In some configure flow of hns3 driver, for example, change mtu, it will disable MAC through firmware before configuration. But firmware disables MAC asynchronously. The rx traffic may be not stopped in this case. So fixes it by waiting until mac link is down. Fixes: a9775bb64aa7 ("net: hns3: fix set and get link ksettings issue") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-08net: hns3: refactor hclge_mac_link_status_wait for interface reuseJie Wang
Some nic configurations could only be performed after link is down. So this patch refactor this API for reuse. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-08net: hns3: restore user pause configure when disable autonegJian Shen
Restore the mac pause state to user configuration when autoneg is disabled Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-08net: hns: Remove unused function declaration mac_adjust_link()Yue Haibing
Commit 511e6bc071db ("net: add Hisilicon Network Subsystem DSAF support") declared but never implemented this, remove it. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Hao Lan <lanhao@huawei.com> Link: https://lore.kernel.org/r/20230804130048.39808-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07page_pool: split types and declarations from page_pool.hYunsheng Lin
Split types and pure function declarations from page_pool.h and add them in page_page/types.h, so that C sources can include page_pool.h and headers should generally only include page_pool/types.h as suggested by jakub. Rename page_pool.h to page_pool/helpers.h to have both in one place. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com [Jakub: change microsoft/mana, fix kdoc paths in Documentation] Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04net: hns3: Remove unused function declarationsYue Haibing
Commit 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously") left behind hclge_inform_vf_promisc_info() declaration. And commit 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") declared but never implemented hclge_cmd_mdio_write() and hclge_cmd_mdio_read(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230803135138.37456-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-06 21:25:09 +0000