summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)Author
2016-09-24i40evf: support queue-specific settings for interrupt moderationJacob Keller
In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt moderation") the i40e driver gained support for setting interrupt moderation values per queue. This patch adds support for this feature to the i40evf driver as well. In addition, a few changes are made to the i40e implementation to add function header documentation comments, as well. This behaves in a similar fashion to the implementation in i40e. Thus, requesting the moderation value when no queue is provided will report queue 0 value, while setting the value without a queue will set all queues at once. Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e/i40evf: Add txring_txq function to match fm10k and ixgbeAlexander Duyck
This patch adds a txring_txq function which allows us to convert a i40e_ring/i40evf_ring to a netdev_tx_queue structure. This way we can avoid having to make a multi-line function call for all the spots that need access to this. Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e: Fix Flow Director raw_buf cleanupAlexander Duyck
The Tx cleanup flow was incorrectly assuming it could check for the flow director bits after it had unmapped the buffer. However in this case it results in us trying to free a raw_buf as though it is an sk_buff. To fix this I am moving up the flag test for the FD_SB bit so that when find a non-NULL skb or raw_buf value we then check the flag and use the appropriate call to free the buffer. Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40evf: enable adaptive interrupt throttlingMitch Williams
All of the code to support adaptive interrupt throttling is already in the interrupt handler, it just needs to be enabled. Fill out the data structures properly to make it happen. Single-flow traffic tests may show slightly lower throughput, but interrupts per second will drop by about 75%. Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e/i40evf: Changed version to 1.6.16Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e: add encap csum VF offload flagPreethi Banala
Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum offload for encapsulated packets is supported by default. Going forward, this feature needs to be negotiated with PF before advertising to the stack. Hence, we need a flag to control it. This is in regards to prepping up for VF base mode functionality support. Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40e_shutdown_adminqLihong Yang
The i40e_shutdown_adminq function never returns failure. There is no need to check the non-0 return value. Clean up the unnecessary error checking and warning against it. Change-ID: Ibb616f09cfb93bd1a872ebf3241a15fb8354b31b Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: Limit TX descriptor count in cases where frag size is greater than 16KAlexander Duyck
The i40e driver was incorrectly assuming that we would always be pulling no more than 1 descriptor from each fragment. It is in fact possible for us to end up with the case where 2 descriptors worth of data may be pulled when a frame is larger than one of the pieces generated when aligning the payload to either 4K or pieces smaller than 16K. To adjust for this we just need to make certain to test all the way to the end of the fragments as it is possible for us to span 2 descriptors in the block before us so we need to guarantee that even the last 6 descriptors have enough data to fill a full frame. Change-ID: Ic2ecb4d6b745f447d334e66c14002152f50e2f99 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40evf_up_completeBimmy Pujari
Function i40evf_up_complete() always returns success. Changed this to a void type and removed the code that checks the return status and prints an error message. Change-ID: I8c400f174786b9c855f679e470f35af292fb50ad Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: Fix link state event handlingSridhar Samudrala
Currently disabling the link state from PF via ip link set enp5s0f0 vf 0 state disable doesn't disable the CARRIER on the VF. This patch updates the carrier and starts/stops the tx queues based on the link state notification from PF. PF: enp5s0f0, VF: enp5s2 #modprobe i40e #echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs #ip link set enp5s2 up #ip -d link show enp5s2 175: enp5s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 #ip link set enp5s0f0 vf 0 state disable #ip -d link show enp5s0f0 171: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 72 numrxqueues 72 portid 6805ca2e7268 vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off #ip -d link show enp5s2 175: enp5s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 16 numrxqueues 16 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: avoid potential null pointer dereference when assigning lenColin Ian King
There is a sanitcy check for desc being null in the first line of function i40evf_debug_aq. However, before that, aq_desc is cast from desc, and aq_desc is being dereferenced on the assignment of len, so this could be a potential null pointer deference. Fix this by moving the initialization of len to the code block where len is being used and hence at this point we know it is OK to dereference aq_desc. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40evf: Open RDMA Client after resetAvinash Dayanand
RDMA client is closed during the PF reset and needs to be opened again. Setting the flag so that RDMA client is opened in watchdog() function. Change-ID: I507b1e4cbd05528cdff68fd360ef3dcac8901263 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e/i40evf: Fix indentationJeff Kirsher
Several defines and code comments were indented with spaces instead of tabs, correct the issue to make indentation consistent. Change-ID: I0dc6bbb990ec4a9e856acc9ec526d876181f092c Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-08-19i40e: Add support for HMC resource and profile for X722Carolyn Wyborny
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Fix byte ordering in ARP NS code for X722Carolyn Wyborny
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: refactor tail_bump checkCarolyn Wyborny
This patch refactors tail bump check. Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40evf: report link speedMitch Williams
The PF driver tells us the link speed, so do something with that information. Add link speed to log messages, and report speed through ethtool. Change-Id: I279dc9540cc5203376406050a3e8d67e128d5882 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: use alloc_workqueue instead of create_singlethread_workqueueJacob Keller
Replace calls to create_singlethread_workqueue instead with alloc_workqueue as is style with other Intel drivers. This provides more control over workqueue creation, and allows explicit setting of the desired mode of operation. It also makes it more obvious that driver name constant is passed to a format "%s". Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf-Bump version from 1.6.11 to 1.6.12Bimmy Pujari
Signed-off-by: Bimmy Pujari <Bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capabilityJacob Keller
The function calls netif_set_real_num_(tx|rx)_queues, both of which should be done only under rntl lock. Unfortunately the i40evf_init_task did not hold the rtnl_lock as necessary. This patch adds the locking needed. Change-ID: Ib72a21c3ce22b71a226b16f9bbe0f5f8cc3e849b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-25Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to i40e and i40evf. Heinrich Schuchardt found a possible null pointer being dereferenced in i40e_debug_aq(), fixed the issue by doing the variable assignment after we are sure the pointer is not null. Avinash fixed an issue when link was down, we were not showing the correct advertised link modes. Mitch cleans up a useless initializer since the variable is assigned right away. Refactors the receive filter handling to properly track filter adds and deletes so the driver will not lose filters during a reset and up/down cycles. Also added a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Catherine removes a device id which is not needed (or used). Moves a mutex lock since we need to lock the client list around the i40e_client_release() call to prevent the release from interrupting the client instances while they are being added. Joshua adds Hyper-V specific VF device ids. Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy(). Stefan Assmann adds the missing link advertise for some x710 NICs. Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC filters and if a platform-specific MAC address is used, the driver has to explicitly write default MAC address to MAC filters otherwise all incoming traffic destined to the default MAC address will be dropped after reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40evf: add hyperv dev idsJoshua Hay
This patch adds the Hyper-V specific VF device ids. Change-ID: I9c4fe6d8dfd34f7f68ebc9fdae225c8768439c89 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-14i40e/i40evf: Fix i40e_rx_checksumAlexander Duyck
There are a couple of issues I found in i40e_rx_checksum while doing some recent testing. As a result I have found the Rx checksum logic is pretty much broken and returning that the checksum is valid for tunnels in cases where it is not. First the inner types are not the correct values to use to test for if a tunnel is present or not. In addition the inner protocol types are not a bitmask as such performing an OR of the values doesn't make sense. I have instead changed the code so that the inner protocol types are used to determine if we report CHECKSUM_UNNECESSARY or not. For anything that does not end in UDP, TCP, or SCTP it doesn't make much sense to report a checksum offload since it won't contain a checksum anyway. This leaves us with the need to set the csum_level based on some value. For that purpose I am using the tunnel_type field. If the tunnel type is GRENAT or greater then this means we have a GRE or UDP tunnel with an inner header. In the case of GRE or UDP we will have a possible checksum present so for this reason it should be safe to set the csum_level to 1 to indicate that we are reporting the state of the inner header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e/i40evf: Bump version from 1.5.16 to 1.6.4Bimmy Pujari
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40evf: always activate correct MAC address filterMitch Williams
Always add MAC address at the tail of the MAC filter list. Since the device's "real" MAC address is added first, it will always be at the beginning of the list. This prevents an issue where the "real" MAC filter might not get added if too many other filters are added before bringing the interface up. Change-ID: I34a8aeebeb0cb87a44b24118adc4176c7b943c1c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40evf: don't overflow bufferMitch Williams
If the user adds an obscene amount of MAC addresses, the driver will run into the situation where it has too many address requests to fit into a single PF message. The driver checks for this case, and calculates the maximum number of messages that it can send. Then it completely ignores this count and overflows the buffer. Fix this by checking the address count and bailing out of the loop at the appropriate time. Change-ID: If8dcbb04602c75941dc0cd8309065e1de9ca791c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-20intel: Add support for IPv6 IP-in-IP offloadAlexander Duyck
This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13i40e: Add allmulti support for the VFAnjali Singhai Jain
This patch enables a feature to enable/disable all multicast for a trusted VF. Change-Id: I926eba7f8850c8d40f8ad7e08bbe4056bbd3985f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: Allocate Rx buffers properlyMitch Williams
Allocate the correct number of RX buffers, and don't fiddle with next_to_use. The common RX code handles all of this. This fixes a memory leak of one page each time the driver is opened. Change-Id: Id06eca353086e084921f047acad28c14745684ee Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove unused hardware receive descriptor codeJesse Brandeburg
The hardware supports a 16 byte descriptor for receive, but the driver was never using it in production. There was no performance benefit to the real driver of 16 byte descriptors, so drop a whole lot of complexity while getting rid of the code. Also since the previous patch made us use no-split mode all the time, drop any support in the driver for any other value in dtype and assume it is always zero (aka no-split). Hooray for code removal! Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: refactor receive routineJesse Brandeburg
This is part 2 of the Rx refactor series, just including changes to i40evf. This refactor aligns the receive routine with the one in ixgbe which was highly optimized. This reduces the code we have to maintain and allows for (hopefully) more readable and maintainable RX hot path. In order to do this: - consolidate the receive path into a single function that doesn't use packet split but *does* use pages for Rx buffers. - remove the old _1buf routine - consolidate several routines into helper functions - remove VF ethtool control over packet split - remove priv_flags interface since it is unused Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: Drop packet split receive routineJesse Brandeburg
As part of preparation for the rx-refactor, remove the packet split receive routine and ancillary code. Some of the split related context set up code stays in i40e_virtchnl_pf.c in case an older VF driver tries to load and still wants to use packet split. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove reference to ring->dtypeJesse Brandeburg
As part of the rx-refactor, the dtype variable in the i40e_ring struct is no longer used, so remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Refactor tunnel interpretationJesse Brandeburg
Refactor the interpretation of a tunnel. This removes some code and lets us start using the hardware's parsing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf: Add support for GSO partial with UDP_TUNNEL_CSUM and GRE_CSUMAlexander Duyck
This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support segmentation for frames with checksums enabled in outer headers. As a result we can now send data over these types of tunnels at over 20Gb/s versus the 12Gb/s that was previously possible on my system. The advantage with the i40e parts is that this offload is mostly transparent as the hardware still deals with the inner and/or outer IPv4 headers so the IP ID is still incrementing for both when this offload is performed. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40evf: make use of BIT() macro to avoid signed left shiftJacob Keller
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf: fix I40E_MASK signed shift overflow warningsJacob Keller
GCC 6 has a new warning which will display when you attempt to left shift a signed value beyond the storage size of the type. I40E_MASK generates a mask value for 32bit registers. Properly typecast the mask value and place the values in parenthesis to prevent macro expansion issues. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf : Bump driver version from 1.5.5 to 1.5.10Harshitha Ramamurthy
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40evf: RSS Hash Option parametersCarolyn Wyborny
This patch syncs the VF code for the changes made to the PF for the RSS hash tuple settings. Since the VF still cannot change the RSS hash settings, change the code to make this clear to the user. Previously, the default settings were returned in this function. However, the default can be changed by the PF so this does not make sense anymore. Change-Id: I085eaf005fc7978b440d2a1bf2b2dd7cadaff39b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Remove HMC AQ API implementationNeerav Parikh
Remove the code that implements the HMC AQ APIs and call these APIs. This is done because these are obsolete APIs and are not supported by firmware. Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40evf: Add driver support for promiscuous modeAnjali Singhai Jain
Add necessary Linux Ethernet driver support for promiscuous mode operation. Add a flag so the VF knows it is in promiscuous mode and two state flags to discreetly track multicast and unicast promiscuous states. Change-Id: Ib2f2dc7a7582304fec90fc917ebb7ded21ba1de4 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e/i40evf: Only offload VLAN tag if enabledJesse Brandeburg
The driver was offloading the VLAN tag into the skb any time there was a VLAN tag and the hardware stripping was enabled. Just check to make sure it's enabled before put_tag. Change-Id: Ife95290c06edd9a616393b38679923938b382241 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add DeviceID for X722 QSFP+Kamil Krawczyk
Change-ID: I1370fbc7774e815ac1ad56561e97488e829592fc Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add device capability which defines if update is availableMichal Kosiarz
Add device capability which defines if update is available and security check is needed during update process. Change-ID: I380787c878275e1df18b39198df3ee3666342282 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-26i40evf: Allow PF driver to configure RSSMitch Williams
If the PF driver reports proper support, allow the PF driver to configure RSS on the behalf of the VF driver. This will allow for RSS support on future hardware without changes to the VF driver. Unfortunately, the old RSS code still needs to stay as the driver needs to be compatible with PF drivers that don't support this interface. But this change still simplifies the data structures a bunch and makes this code simpler to read and maintain. Change-ID: I0375aad40788ecdc0cb24d5cfeccf07804e69771 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-05-01 14:59:54 +0000