summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf
AgeCommit message (Collapse)Author
2014-08-25i40evf: Fix TSO and hw checksums for non-accelerated vlan packets.Vlad Yasevich
This device claims TSO and checksum support for vlans. It also allows a user to control vlan acceleration offloading. As such, it is possible to turn off vlan acceleration and configure a vlan which will continue to support TSO and hw checksums. In such situation the packet passed down the the device will contain a vlan header and skb->protocol will be set to ETH_P_8021Q. The device assumes that skb->protocol contains network protocol value and uses that value to set up TSO and checksum information. This results in corrupted frames sent on the wire. This patch extract the protocol value correctly and corrects TSO and checksums for non-accelerated traffic. Fix this by using vlan_get_protocol() helper. CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Bruce Allan <bruce.w.allan@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> CC: Don Skidmore <donald.c.skidmore@intel.com> CC: Greg Rose <gregory.v.rose@intel.com> CC: Alex Duyck <alexander.h.duyck@intel.com> CC: John Ronciak <john.ronciak@intel.com> CC: Mitch Williams <mitch.a.williams@intel.com> CC: Linux NICS <linux.nics@intel.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-02i40evf: Fixed guest OS panic when removing vf driverSerey Kong
Removing VF driver during device still in reset caused guest OS panic. in the i40evf_remove(), we're trying to clean mac_filter_list which has not been initialized since the device is still stuck at the reset. The change is to initialize the filter_list before setting any task. Change-ID: I8b59df7384416c7e6f2d264b598f447e1c2c92b0 Signed-off-by: Serey Kong <serey.kong@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02i40evf: fix memory leak on unused interfacesMitch Williams
If the driver is loaded and then unloaded before the interface is brought up, then it will allocate a MAC filter entry and never free it. To fix this, on unload, run through the mac filter list and free all the entries. We also do this during reset recovery when the driver cannot contact the PF and needs to shut down completely. Change-ID: I15fabd67eb4a1bfc57605a7db60d0b5d819839db Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02i40evf: don't leak queue vectorsMitch Williams
Fix a memory leak. Driver was allocating memory for queue vectors on init but not freeing them on shutdown. These need to be freed at two different times: during module unload, and during reset recovery when the driver cannot contact the PF driver and needs to give up. Change-ID: I7c1d0157a776e960d4da432dfe309035aad7c670 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02i40evf: do not re-arm watchdog after removeAshish Shah
Add in an adapter state check to prevent re-arming watchdog timer after i40evf_remove has been called and timer has been deleted. Change-ID: I636ba7c6322be8cbf053231959f90c0a2d8d803a Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02i40evf: future-proof vfr_stat state checkAshish Shah
Previously defined state I40E_VFR_VFACTIVE uses bit 1 which is now set to "reserved." Update the state checks to also include I40E_VFR_COMPLETED. This change will allow the VF to work with both existing and future PFs. Change-ID: Ifd1d34f79f3b0ffd6d2550ee4dadc55825ff52f8 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02i40evf: fix scan warning on sprintfJesse Brandeburg
The driver was converted to use snprintf everywhere but this one function. Just use snprintf, instead of sprintf. Also a small spelling correction in a comment. Change-ID: I59d45f94a52754c7b4cd6034df9a61d8132b7f77 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24i40e: always print aqtx answerShannon Nelson
Sometimes the AQTX answer comes back with no data, but we still want to print the descriptor that got written back. Change-ID: I5f734d99b4c95510987413893f0a34626571d474 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: ARQ copy desc data even for failed commandsKamil Krawczyk
Copy desc and buffer data even for ARQ events which return error status. Previously, a check for NVM related AQ commands which is done later in this function would not recognize that such a command was received and would not clear nvm_busy flag. This would block access to NVM until a driver reset. This will fix that. Change-ID: If69ad74e165b56081c0686b97402511d2e2880c0 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40evf: don't wait so longMitch Williams
We really don't need to delay an entire millisecond just to get into our critical section. A microsecond will be sufficient, thank you. Change-ID: I2d02ece6610007d98cabcb3f42df9a774bb54e59 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: fix extension header csum logicJesse Brandeburg
The hardware design requires that the driver avoid indicating checksum offload success on some ipv6 frames with extension headers. The code needs to just check for the IPV6EXADD bit and if it is set punt the checksum to the stack. I don't know why the code was checking TCP on inner protocol, as that code doesn't make any sense to me but seems wrong, so remove it. Change-ID: I10d3aacdbb1819fb60b4b0eb80e6cc67ef2c9599 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: Add nvmupdate supportShannon Nelson
This implements a state machine intended to support the userland tool for updating the device eeprom. The state machine implements one-shot reads, writes, multi-step write sessions, and checksum requests. If we're in the middle of a multi-step write session, no one should fire off other writes, however, one shot reads are valid. The userland tool is expected to keep track of its session status, arrange the placement and ordering of the writes, and deal with the checksum requirement. This patch also adds nvmupdate support to ethtool callbacks. The get_eeprom() and set_eeprom() services in ethtool are used here to facilitate the userland NVMUpdate tool. The 'magic' value in the get and set commands is used to pass additional control information for managing the read and write steps. The read operation works both as normally expected in the standard ethtool method, as well as with the extra NVM controls. The write operation works only for the expanded NVM functions - the normal ethtool method is not allowed because of the NVM semaphore management needed for multipart writes, as well as the checksum requirement. Change-ID: I1d84a170153a9f437906744e2e350fd68fe7563d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-16i40e/i40evf: Clean up codePaul M Stillwell Jr
1. Remove some break statements that will never get touched. 2. Remove an extra space. 3. Remove a comment for a parameter that doesn't exist 4. Move the assignment of a variable up to get rid of an else case. Change-ID: I308a4b5ec070b1f0601f13b041ba4375aaad4b06 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-13i40evf: remove unnecessary break after gotoFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02i40e/i40evf: Bump i40e to 0.4.21 and i40evf to 0.9.40Catherine Sullivan
Bump. Change-ID: Ie0c36583ffd9997679f46bdf89bc462d3e992995 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Add set_fc and init of FC settingsCatherine Sullivan
Add function set_fc to set the requested FC mode. This patch also adds the init of FC setting to get_link_info and replaces the init code to set FC off by default in main. Also adds i40e_set_phy_config to support this. Change-ID: I7b25bbaec81f15777137ab324a095f916e44351d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Add new HW link info variable an_enabled and function ↵Catherine Sullivan
update_link_info Add a new variable, hw.phy.link_info.an_enabled, to track whether autoneg is enabled. Also add a new function update_link_info that will update that variable as well as calling get_link_info to update the rest of the link info. Also add get_phy_capabilities to support this. Change-ID: I5157ef03492b6dd8ec5e608ba0cf9b0db9c01710 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40evf: invite vector 0 to the interrupt partyMitch Williams
The i40evf_irq_enable and i40evf_fire_sw_interrupt functions were unfairly discriminating against MSI-X vector 0, just because it doesn't handle traffic. That doesn't mean it's not essential to the operation of the driver. This change allows the watchdog to fire vector 0 via software, which makes the driver tolerant of dropped interrupts on that vector. Buck up, vector 0! You can be part of our gang! Change-ID: I37131d955018a6b3e711e1732d21428acd0d767e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Force a shifted '1' to be unsignedPaul M Stillwell Jr
Force a shifted '1' to be unsiged to avoid shifting a signed int Change-ID: I688cbd082af0f2e1df548fda25847a5ca04babcf Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40evf: don't violate scopeMitch Williams
Move a declaration up one level so we don't dereference it out of scope. This didn't cause any panics, but the details->async field would mysteriously disappear, causing unnecessary delays when sending AQ commands. Also, the code is just plain wrong. Change-ID: I753f64f13c55e5d75ea4351e29b14fb53b2f0104 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e/i40evf: Do not free the dummy packet buffer synchronouslyAnjali Singhai Jain
The HW still needs to consume it and freeing it in the function that created it would mean we will be racing with the HW. The i40e_clean_tx_ring() routine will free up the buffer attached once the HW has consumed it. The clean_fdir_tx_irq function had to be fixed to handle the freeing correctly. Cases where we program more than one filter per flow (Ipv4), the code had to be changed to allocate dummy buffer multiple times since it will be freed by the clean routine. This also fixes an issue where the filter program routine was not checking if there were descriptors available for programming a filter. Change-ID: Idf72028fd873221934e319d021ef65a1e51acaf7 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40e/i40evf: Bump i40e to 0.4.19 and i40evf to 0.9.38Catherine Sullivan
Bump versions. Change-ID: Id5082d7c3995fbddd22b3e303d804c86fcd240a3 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40evf: change branding stringMitch Williams
Add a slash to the branding string to reduce confusion and match up with our other marketing materials. Change-ID: I8229e8c3e43083b7a29c859a250f8d2d4dc46b9e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40e/i40evf: initialize context descriptorJesse Brandeburg
Driver needs to initialize all members of context descriptor. Stale data is possible otherwise. Change-ID: Idc6b53af45583509da42d5ec0824cbaf78aee64f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: add ASQ write back timeout variable to AQ structureKamil Krawczyk
Add new variable defining ASQ command write back timeout to allow for dynamic modification of this timeout. Initialize it on AQ initialize routine with default value, vary it on device ID. Change-ID: I5c9908f9d7c5455634353b694a986d6f146d1b9d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40evf: set flags before sending messageMitch Williams
In some circumstances, the firmware could beat us to the punch, and the reply from the PF would come back before we were able to properly modify the aq_pending and aq_required flags. This would mess up the flags and put the driver in an indeterminate state, much like Schrödinger's cat. However, unlike the cat, the driver is definitely dead. To fix this, simply set the flags before sending the request to the AQ. This way, it won't matter if the interrupt comes back too soon. Change-ID: I9784655e475675ebcb3140cc7f36f4a96aaadce5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: clear aq bah-bal on shutdownShannon Nelson
Clear the AQ BAH and BAL registers on a clean shutdown to help make sure all is tidy when the driver is done. Change-ID: I393e92680247daa52a8e00bab183213672d73578 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-30i40e/i40evf: Add base address registers to aq structShannon Nelson
Add the Base Address High and Low to the admin queue struct to simplify another bit of "which context" logic in the config routines. Change-ID: Iae195a7da3baffc1a9d522119e1e2b427068ad07 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: resend FW request if no responseMitch Williams
Sometimes the firmware will not indicate an error but fail to pass a message between the VF and the PF driver. If this happens, just resend the request. This fixes an initialization failure if many VFs are instantiated at the same time and the VF module is autoloaded. Change-ID: Idd1ad8da2fd5137859244685c355941427d317d7 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: fix typoMitch Williams
Correct a missing word in a log message. Change-ID: Id94da7d9f842382d073b3947e0b616503e2f8e91 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: return more useful error informationMitch Williams
When verifying the API version (which is the first time the driver communicates with the firmware and thus the PF driver), there are many ways in which a failure can occur. There may be an error from the firmware, there may be unresponsive firmware, there may be an error from the PF driver, etc, etc. Make this function return more useful information, instead of just -EIO. Propagate FW errors back to the caller, and log a message if the PF sends an invalid reply. Change-ID: I3e9135a2b80f7acdb855f62f12b2b2668c9a8951 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40evf: don't stop watchdog if it hasn't startedMitch Williams
If the VF driver fails to complete early init, then rmmod can cause a softlock when the driver tries to stop a watchdog timer that never even got initialized. Add a check to see if the timer is actually initialized before stopping it. Change-ID: Id9d550aa8838e07f4b02afe7bc017ef983779efc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-26i40e/i40evf: Big endian fixes for handling HMCPaul M Stillwell Jr
Fix HMC handling for big endian architectures. Change-ID: Id8c46fc341815d47bfe0af8b819f0ab9a1e9e515 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e/i40evf: Bump i40e to 0.4.17 and i40evf to 0.9.36Catherine Sullivan
Bump versions. Change-ID: I47fc3433240800cd823ff512f3015822277b0d20 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e/i40evf: remove reserved typeJesse Brandeburg
One of the PCTYPES that was moved to a reserved value wasn't removed from the code. Change-ID: I31fafe6d79c5f5128179979af5eaafa8c0cd62fe Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Bump i40e to 0.4.13 and i40evf to 0.9.35Catherine Sullivan
Bump versions. Change-ID: Ifaed5404b9e953a11f4c88953ffe4bc8937705f1 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: modify debug prints to avoid seg faultsKamil Krawczyk
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-20i40e/i40evf: Update RSS configurationCarolyn Wyborny
This patch changes the RSS configuration to set table size and write to hardware to confirm RSS table size being used. Change-ID: I455a4c09c9dd479f5791ee1f09fdc83ff9908df5 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40evf: fix off-by-oneMitch Williams
The loop in i40evf_get_rxfh_indir was only reading fifteen registers, not all sixteen. Change the matching loop in i40evf_set_rxfh_indir at the same time to make the code more consistent. Change-ID: I6c182287698e742d1f6ca1a4bcc43cc08df6e1de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40e/i40evf: Reset Head and Tail on AQ initializationMichal Kosiarz
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-19i40e/i40evf: i40e_register.h updateAnjali Singhai Jain
This updates the register file for new hardware. The format of the file has changed requiring drivers to declare I40E_MASK. I40E_MASK is to be used with 32 bit registers. This patch also updates the drivers to accommodate the register changes. Change-ID: If9bc8d736391024cbf99054efe50f9acc12ee4f1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Bump i40e to version 0.4.10 and i40evf to 0.9.34Catherine Sullivan
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Add Flow director stats to PF statsAnjali Singhai Jain
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: remove FTYPEJesse Brandeburg
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: check admin queue error bitsMitch Williams
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: User ether_addr_copy instead of memcpyGreg Rose
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40evf: don't go further downMitch Williams
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: AdminQ API update for new FWShannon Nelson
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: set headwb Tx context flags and use themAshish Shah
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2024-06-10 14:42:59 +0000