summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice.h
AgeCommit message (Collapse)Author
2021-11-03ice: Fix VF true promiscuous modeBrett Creeley
When a VF requests promiscuous mode and it's trusted and true promiscuous mode is enabled the PF driver attempts to enable unicast and/or multicast promiscuous mode filters based on the request. This is fine, but there are a couple issues with the current code. [1] The define to configure the unicast promiscuous mode mask also includes bits to configure the multicast promiscuous mode mask, which causes multicast to be set/cleared unintentionally. [2] All 4 cases for enable/disable unicast/multicast mode are not handled in the promiscuous mode message handler, which causes unexpected results regarding the current promiscuous mode settings. To fix [1] make sure any promiscuous mask defines include the correct bits for each of the promiscuous modes. To fix [2] make sure that all 4 cases are handled since there are 2 bits (FLAG_VF_UNICAST_PROMISC and FLAG_VF_MULTICAST_PROMISC) that can be either set or cleared. Also, since either unicast and/or multicast promiscuous configuration can fail, introduce two separate error values to handle each of these cases. Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: Add support to print error on PHY FW load failureBrett Creeley
Some devices have support for loading the PHY FW and in some cases this can fail. When this fails, the FW will set the corresponding bit in the link info structure. Also, the FW will send a link event if the correct link event mask bit is set. Add support for printing an error message when the PHY FW load fails during any link configuration flow and the link event flow. Since ice_check_module_power() is already doing something very similar add a new function ice_check_link_cfg_err() so any failures reported in the link info's link_cfg_err member can be printed in this one function. Also, add the new ICE_FLAG_PHY_FW_LOAD_FAILED bit to the PF's flags so we don't constantly print this error message during link polling if the value never changed. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-28ice: support for indirect notificationMichal Swiatkowski
Implement indirect notification mechanism to support offloading TC rules on tunnel devices. Keep indirect block list in netdev priv. Notification will call setting tc cls flower function. For now we can offload only ingress type. Return not supported for other flow block binder. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20ice: Add tc-flower filter support for channelKiran Patil
Add support to add/delete channel specific filter using tc-flower. For now, only supported action is "skip_sw hw_tc <tc_num>" Filter criteria is specific to channel and it can be combination of L3, L3+L4, L2+L4. Example: MATCH criteria Action --------------------------- src and/or dest IPv4[6]/mask -> Forward to "hw_tc <tc_num>" dest IPv4[6]/mask + dest L4 port -> Forward to "hw_tc <tc_num>" dest MAC + dest L4 port -> Forward to "hw_tc <tc_num>" src IPv4[6]/mask + src L4 port -> Forward to "hw_tc <tc_num>" src MAC + src L4 port -> Forward to "hw_tc <tc_num>" Adding tc-flower filter for channel using "hw_tc" ------------------------------------------------- tc qdisc add dev <ethX> clsact Above two steps are only needed the first time when adding tc-flower filter. tc filter add dev <ethX> protocol ip ingress prio 1 flower \ dst_ip 192.168.0.1/32 ip_proto tcp dst_port 5001 \ skip_sw hw_tc 1 tc filter show dev <ethX> ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 hw_tc 1 eth_type ipv4 ip_proto tcp dst_ip 192.168.0.1 dst_port 5001 skip_sw in_hw in_hw_count 1 Delete specific filter: ------------------------- tc filter del dev <ethx> ingress pref 1 handle 0x1 flower Delete All filters: ------------------ tc filter del dev <ethX> ingress Co-developed-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20ice: enable ndo_setup_tc support for mqprio_qdiscKiran Patil
Add support in driver for TC_QDISC_SETUP_MQPRIO. This support enables instantiation of channels in HW using existing MQPRIO infrastructure which is extended to be offloadable. This provides a mechanism to configure dedicated set of queues for each TC. Configuring channels using "tc mqprio": -------------------------------------- tc qdisc add dev <ethX> root mqprio num_tc 3 map 0 1 2 \ queues 4@0 4@4 4@8 hw 1 mode channel Above command configures 3 TCs having 4 queues each. "hw 1 mode channel" implies offload of channel configuration to HW. When driver processes configuration received via "ndo_setup_tc: QDISC_SETUP_MQPRIO", each TC maps to HW VSI with specified queues. User can optionally specify bandwidth min and max rate limit per TC (see example below). If shaper params like min and/or max bandwidth rate limit are specified, driver configures VSI specific rate limiter in HW. Configuring channels and bandwidth shaper parameters using "tc mqprio": ---------------------------------------------------------------- tc qdisc add dev <ethX> root mqprio \ num_tc 4 map 0 1 2 3 queues 4@0 4@4 4@8 4@12 hw 1 mode channel \ shaper bw_rlimit min_rate 1Gbit 2Gbit 3Gbit 4Gbit \ max_rate 4Gbit 5Gbit 6Gbit 7Gbit Command to view configured TCs: ----------------------------- tc qdisc show dev <ethX> Deleting TCs: ------------ tc qdisc del dev <ethX> root mqprio Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20ice: Add infrastructure for mqprio support via ndo_setup_tcKiran Patil
Add infrastructure required for "ndo_setup_tc:qdisc_mqprio". ice_vsi_setup is modified to configure traffic classes based on mqprio data received from the stack. This includes low-level functions to configure min, max rate-limit parameters in hardware for traffic classes. Each traffic class gets mapped to a hardware channel (VSI) which can be individually configured with different bandwidth parameters. Co-developed-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-15ice: make use of ice_for_each_* macrosMaciej Fijalkowski
Go through the code base and use ice_for_each_* macros. While at it, introduce ice_for_each_xdp_txq() macro that can be used for looping over xdp_rings array. Commit is not introducing any new functionality. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-15ice: introduce XDP_TX fallback pathMaciej Fijalkowski
Under rare circumstances there might be a situation where a requirement of having XDP Tx queue per CPU could not be fulfilled and some of the Tx resources have to be shared between CPUs. This yields a need for placing accesses to xdp_ring inside a critical section protected by spinlock. These accesses happen to be in the hot path, so let's introduce the static branch that will be triggered from the control plane when driver could not provide Tx queue dedicated for XDP on each CPU. Currently, the design that has been picked is to allow any number of XDP Tx queues that is at least half of a count of CPUs that platform has. For lower number driver will bail out with a response to user that there were not enough Tx resources that would allow configuring XDP. The sharing of rings is signalled via static branch enablement which in turn indicates that lock for xdp_ring accesses needs to be taken in hot path. Approach based on static branch has no impact on performance of a non-fallback path. One thing that is needed to be mentioned is a fact that the static branch will act as a global driver switch, meaning that if one PF got out of Tx resources, then other PFs that ice driver is servicing will suffer. However, given the fact that HW that ice driver is handling has 1024 Tx queues per each PF, this is currently an unlikely scenario. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-15ice: split ice_ring onto Tx/Rx separate structsMaciej Fijalkowski
While it was convenient to have a generic ring structure that served both Tx and Rx sides, next commits are going to introduce several Tx-specific fields, so in order to avoid hurting the Rx side, let's pull out the Tx ring onto new ice_tx_ring and ice_rx_ring structs. Rx ring could be handled by the old ice_ring which would reduce the code churn within this patch, but this would make things asymmetric. Make the union out of the ring container within ice_q_vector so that it is possible to iterate over newly introduced ice_tx_ring. Remove the @size as it's only accessed from control path and it can be calculated pretty easily. Change definitions of ice_update_ring_stats and ice_fetch_u64_stats_per_ring so that they are ring agnostic and can be used for both Rx and Tx rings. Sizes of Rx and Tx ring structs are 256 and 192 bytes, respectively. In Rx ring xdp_rxq_info occupies its own cacheline, so it's the major difference now. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-14ice: Implement support for SMA and U.FL on E810-TMaciej Machnikowski
Expose SMA and U.FL connectors as ptp_pins on E810-T based adapters and allow controlling them. E810-T adapters are equipped with: - 2 external bidirectional SMA connectors - 1 internal TX U.FL - 1 internal RX U.FL U.FL connectors share signal lines with the SMA connectors. The TX U.FL1 share the line with the SMA1 and the RX U.FL2 share line with the SMA2. This dependence is controlled by the ice_verify_pin_e810t. Additionally add support for the E810-T-based devices which don't use the SMA/U.FL controller. If the IO expander is not detected don't expose pins and use 2 predefined 1PPS input and output pins. Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: ndo_setup_tc implementation for PFKiran Patil
Implement ndo_setup_tc net device callback for TC HW offload on PF device. ndo_setup_tc provides support for HW offloading various TC filters. Add support for configuring the following filter with tc-flower: - default L2 filters (src/dst mac addresses, ethertype, VLAN) - variations of L3, L3+L4, L2+L3+L4 filters using advanced filters (including ipv4 and ipv6 addresses). Allow for adding/removing TC flows when PF device is configured in eswitch switchdev mode. Two types of actions are supported at the moment: FLOW_ACTION_DROP and FLOW_ACTION_REDIRECT. Co-developed-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: add port representor ethtool ops and statsWojciech Drewek
Introduce the following ethtool operations for VF's representor: -get_drvinfo -get_strings -get_ethtool_stats -get_sset_count -get_link In all cases, existing operations were used with minor changes which allow us to detect if ethtool op was called for representor. Only VF VSI stats will be available for representor. Implement ndo_get_stats64 for port representor. This will update VF VSI stats and read them. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: introduce new type of VSI for switchdevGrzegorz Nitka
New type of VSI has to be defined for switchdev control plane VSI. Number of allocated Tx and Rx queue has to be equal to amount of VFs, because each port representor should have one Tx and Rx queue. Also to not increase number of used irqs too much, control plane VSI uses only one q_vector and handle all queues in one irq. To allow handling all queues in one irq , new function to clean msix for eswitch was introduced. This function will schedule napi for each representor instead of scheduling it only for one like in normal clean irq function. Only one additional msix has to be requested. Always try to request it in ice_ena_msix_range function. Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: set and release switchdev environmentGrzegorz Nitka
Switchdev environment has to be set up when user create VFs and eswitch mode is switchdev. Release is done when user delete all VFs. Data path in this implementation is based on control plane VSI. This VSI is used to pass traffic from port representors to corresponding VFs and vice versa. Default TX rule has to be added to forward packet to control plane VSI. This will redirect packets from VFs which don't match other rules to control plane VSI. On RX side default rule is added on uplink VSI to receive all traffic that doesn't match other rules. When setting switchdev environment all other rules from VFs should be removed. Packet to VFs will be forwarded by control plane VSI. As VF without any mac rules can't send any packet because of antispoof mechanism, VSI antispoof should be turned off on each VFs. To send packet from representor to correct VSI, destination VSI field in TX descriptor will have to be filled. Allow that by setting destination override bit in control plane VSI security config. Packet from VFs will be received on control plane VSI. Driver should decide to which netdev forward the packet. Decision is made based on src_vsi field from descriptor. There is a target netdev list in control plane VSI struct which choose netdev based on src_vsi number. Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: introduce VF port representorMichal Swiatkowski
Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: Move devlink port to PF/VF structWojciech Drewek
Keeping devlink port inside VSI data structure causes some issues. Since VF VSI is released during reset that means that we have to unregister devlink port and register it again every time reset is triggered. With the new changes in devlink API it might cause deadlock issues. After calling devlink_port_register/devlink_port_unregister devlink API is going to lock rtnl_mutex. It's an issue when VF reset is triggered in netlink operation context (like setting VF MAC address or VLAN), because rtnl_lock is already taken by netlink. Another call of rtnl_lock from devlink API results in dead-lock. By moving devlink port to PF/VF we avoid creating/destroying it during reset. Since this patch, devlink ports are created during ice_probe, destroyed during ice_remove for PF and created during ice_repr_add, destroyed during ice_repr_rem for VF. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-07ice: support basic E-Switch mode controlMichal Swiatkowski
Write set and get eswitch mode functions used by devlink ops. Use new pf struct member eswitch_mode to track current eswitch mode in driver. Changing eswitch mode is only allowed when there are no VFs created. Create new file for eswitch related code. Add config flag ICE_SWITCHDEV to allow user to choose if switchdev support should be enabled or disabled. Use case examples: - show current eswitch mode ('legacy' is the default one) [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode legacy - move to 'switchdev' mode [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode switchdev [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode switchdev - create 2 VFs [root@localhost]# echo 2 > /sys/class/net/ens4f1/device/sriov_numvfs - unsuccessful attempt to change eswitch mode while VFs are created [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy devlink answers: Operation not supported - destroy VFs [root@localhost]# echo 0 > /sys/class/net/ens4f1/device/sriov_numvfs - restore 'legacy' mode [root@localhost]# devlink dev eswitch set pci/0000:03:00.1 mode legacy [root@localhost]# devlink dev eswitch show pci/0000:03:00.1 pci/0000:03:00.1: mode legacy Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-28ice: Add feature bitmap, helpers and a check for DSCPAnirudh Venkataramanan
DSCP a.k.a L3 QoS is only supported on certain devices. To enforce this, this patch introduces a bitmap of features and helper functions. The feature bitmap is set based on device IDs on driver init. Currently, DSCP is the only feature in this bitmap, but there will be more in the future. In the DCB netlink flow, check if the feature bit is set before exercising DSCP. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-09-10ice: Correctly deal with PFs that do not support RDMADave Ertman
There are two cases where the current PF does not support RDMA functionality. The first is if the NVM loaded on the device is set to not support RDMA (common_caps.rdma is false). The second is if the kernel bonding driver has included the current PF in an active link aggregate. When the driver has determined that this PF does not support RDMA, then auxiliary devices should not be created on the auxiliary bus. Without a device on the auxiliary bus, even if the irdma driver is present, there will be no RDMA activity attempted on this PF. Currently, in the reset flow, an attempt to create auxiliary devices is performed without regard to the ability of the PF. There needs to be a check in ice_aux_plug_dev (as the central point that creates auxiliary devices) to see if the PF is in a state to support the functionality. When disabling and re-enabling RDMA due to the inclusion/removal of the PF in a link aggregate, we also need to set/clear the bit which controls auxiliary device creation so that a reset recovery in a link aggregate situation doesn't try to create auxiliary devices when it shouldn't. Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Reported-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09ice: Stop processing VF messages during teardownAnirudh Venkataramanan
When VFs are setup and torn down in quick succession, it is possible that a VF is torn down by the PF while the VF's virtchnl requests are still in the PF's mailbox ring. Processing the VF's virtchnl request when the VF itself doesn't exist results in undefined behavior. Fix this by adding a check to stop processing virtchnl requests when VF teardown is in progress. Fixes: ddf30f7ff840 ("ice: Add handler to configure SR-IOV") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-11ice: register 1588 PTP clock device object for E810 devicesJacob Keller
Add a new ice_ptp.c file for holding the basic PTP clock interface functions. If the device supports PTP, call the new ice_ptp_init and ice_ptp_release functions where appropriate. If the function owns the hardware resource associated with the PTP hardware clock, register with the PTP_1588_CLOCK infrastructure to allocate a new clock object that represents the device hardware clock. Implement basic functionality for reading and setting the clock time, performing clock adjustments, and adjusting the clock frequency. Future changes will introduce functionality for handling related features including Tx and Rx timestamps. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-11ice: add support for sideband messagesJacob Keller
In order to support certain device features, including enabling the PTP hardware clock, the ice driver needs to control some registers on the device PHY. These registers are accessed by sending sideband messages. For some hardware, these messages must be sent over the device admin queue, while other hardware has a dedicated control queue for the sideband messages. Add the neighbor device message structure for sending a message to the neighboring device. Where supported, initialize the sideband control queue and handle cleanup. Add a wrapper function for sending sideband control queue messages that read or write a neighboring device register. Because some devices send sideband messages over the AdminQ, also increase the length of the admin queue to allow more messages to be queued up. This is important because the sideband messages add additional pressure on the AQ usage. This support will be used in following patches to enable support for CONFIG_1588_PTP_CLOCK. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-06-07 This series contains updates to virtchnl header file and ice driver. Brett adds capability bits to virtchnl to specify whether a primary or secondary MAC address is being requested and adds the implementation to ice. He also adds storing of VF MAC address so that it will be preserved across reboots of VM and refactors VF queue configuration to remove the expectation that configuration be done all at once. Krzysztof refactors ice_setup_rx_ctx() to remove configuration not related to Rx context into a new function, ice_vsi_cfg_rxq(). Liwei Song extends the wait time for the global config timeout. Salil Mehta refactors code in ice_vsi_set_num_qs() to remove an unnecessary call when the user has requested specific number of Rx or Tx queues. Jesse converts define macros to static inlines for NOP configurations. Jake adds messaging when devlink fails to read device capabilities and when pldmfw cannot find the requested firmware. Adds a wait for reset completion when reporting devlink info and reinitializes NVM during rebuild to ensure values are current. Ani adds detection and reporting of modules exceeding supported power levels and changes an error message to a debug message. Paul fixes a clang warning for deadcode.DeadStores. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07ice: Detect and report unsupported module power levelsAnirudh Venkataramanan
Determine whether an unsupported power configuration is preventing link establishment by storing and checking the link_cfg_err_byte. Print error messages when module power levels are unsupported. Also add a new flag bit to prevent spamming said error messages. Co-developed-by: Jeb Cramer <jeb.j.cramer@intel.com> Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07ice: wait for reset before reporting devlink infoJacob Keller
Requesting device firmware information while the device is busy cleaning up after a reset can result in an unexpected failure: This occurs because the command is attempting to access the device AdminQ while it is down. Resolve this by having the command wait for a while until the reset is complete. To do this, introduce a reset_wait_queue and associated helper function "ice_wait_for_reset". This helper will use the wait queue to sleep until the driver is done rebuilding. Use of a wait queue is preferred because the potential sleep duration can be several seconds. To ensure that the thread wakes up properly, a new wake_up call is added during all code paths which clear the reset state bits associated with the driver rebuild flow. Using this ensures that tools can request device information without worrying about whether the driver is cleaning up from a reset. Specifically, it is expected that a flash update could result in a device reset, and it is better to delay the response for information until the reset is complete rather than exit with an immediate failure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-03ice: track AF_XDP ZC enabled queues in bitmapMaciej Fijalkowski
Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe. Fixes: c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-28ice: Register auxiliary device to provide RDMADave Ertman
Register ice client auxiliary RDMA device on the auxiliary bus per PCIe device function for the auxiliary driver (irdma) to attach to. It allows to realize a single RDMA driver (irdma) capable of working with multiple netdev drivers over multi-generation Intel HW supporting RDMA. There is no load ordering dependencies between ice and irdma. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-28ice: Implement iidc operationsDave Ertman
Add implementations for supporting iidc operations for device operation such as allocation of resources and event notifications. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-28ice: Initialize RDMA supportDave Ertman
Probe the device's capabilities to see if it supports RDMA. If so, allocate and reserve resources to support its operation; populate structures with initial values. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-22ice: warn about potentially malicious VFsVignesh Sridhar
Attempt to detect malicious VFs and, if suspected, log the information but keep going to allow the user to take any desired actions. Potentially malicious VFs are identified by checking if the VFs are transmitting too many messages via the PF-VF mailbox which could cause an overflow of this channel resulting in denial of service. This is done by creating a snapshot or static capture of the mailbox buffer which can be traversed and in which the messages sent by VFs are tracked. Co-developed-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Co-developed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Co-developed-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-14ice: replace custom AIM algorithm with kernel's DIM libraryJacob Keller
The ice driver has support for adaptive interrupt moderation, an algorithm for tuning the interrupt rate dynamically. This algorithm is based on various assumptions about ring size, socket buffer size, link speed, SKB overhead, ethernet frame overhead and more. The Linux kernel has support for a dynamic interrupt moderation algorithm known as "dimlib". Replace the custom driver-specific implementation of dynamic interrupt moderation with the kernel's algorithm. The Intel hardware has a different hardware implementation than the originators of the dimlib code had to work with, which requires the driver to use a slightly different set of inputs for the actual moderation values, while getting all the advice from dimlib of better/worse, shift left or right. The change made for this implementation is to use a pair of values for each of the 5 "slots" that the dimlib moderation expects, and the driver will program those pairs when dimlib recommends a slot to use. The currently implementation uses two tables, one for receive and one for transmit, and the pairs of values in each slot set the maximum delay of an interrupt and a maximum number of interrupts per second (both expressed in microseconds). There are two separate kinds of bugs fixed by using DIMLIB, one is UDP single stream send was too slow, and the other is that 8K ping-pong was going to the most aggressive moderation and has much too high latency. The overall result of using DIMLIB is that we meet or exceed our performance expectations set based on the old algorithm. Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-14ice: Add new VSI states to track netdev alloc/registrationAnirudh Venkataramanan
Add two new VSI states, one to track if a netdev for the VSI has been allocated and the other to track if the netdev has been registered. Call unregister_netdev/free_netdev only when the corresponding state bits are set. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-14ice: Drop leading underscores in enum ice_pf_stateAnirudh Venkataramanan
Remove the leading underscores in enum ice_pf_state. This is not really communicating anything and is unnecessary. No functional change. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-14ice: use kernel definitions for IANA protocol ports and ether-typesBruce Allan
The well-known IANA protocol port 3260 (iscsi-target 0x0cbc) and the ether-types 0x8906 (ETH_P_FCOE) and 0x8914 (ETH_P_FIP) are already defined in kernel header files. Use those definitions instead of open-coding the same. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-07ice: Remove rx_gro_dropped statAnirudh Venkataramanan
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Consolidate VSI state and flagsAnirudh Venkataramanan
struct ice_vsi has two fields, state and flags which seem to be serving the same purpose. Consolidate them into one field 'state'. enum ice_state is used to represent state information of the PF. While some of these enum values can be use to represent VSI state, it makes more sense to represent VSI state with its own enum. So derive a new enum ice_vsi_state from ice_vsi_flags and ice_state and use it. Also rename enum ice_state to ice_pf_state for clarity. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Refactor ice_set/get_rss into LUT and key specific functionsBrett Creeley
Currently ice_set/get_rss are used to set/get the RSS LUT and/or RSS key. However nearly everywhere these functions are called only the LUT or key are set/get. Also, making this change reduces how many things ice_set/get_rss are doing. Fix this by adding ice_set/get_rss_lut and ice_set/get_rss_key functions. Also, consolidate all calls for setting/getting the RSS LUT and RSS Key to use ice_set/get_rss_lut() and ice_set/get_rss_key(). Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-31ice: Change ice_vsi_setup_q_map() to not depend on RSSBrett Creeley
Currently, ice_vsi_setup_q_map() depends on the VSI's rss_size. However, the Rx Queue Mapping section of the VSI context has no dependency on RSS. Instead, limit the maximum number of Rx queues per TC based on the Rx Queue mapping section of the VSI context, which currently allows for up to 256 Rx queues per TC. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: Use port number instead of PF ID for WoLAnirudh Venkataramanan
As per the spec, the WoL control word read from the NVM should be interpreted as port numbers, and not PF numbers. So when checking if WoL supported, use the port number instead of the PF ID. Also, ice_is_wol_supported doesn't really need a pointer to the pf struct, but just needs a pointer to the hw instance. Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: remove DCBNL_DEVRESET bit from PF stateDave Ertman
The original purpose of the ICE_DCBNL_DEVRESET was to protect the driver during DCBNL device resets. But, the flow for DCBNL device resets now consists of only calls up the stack such as dev_close() and dev_open() that will result in NDO calls to the driver. These will be handled with state changes from the stack. Also, there is a problem of the dev_close and dev_open being blocked by checks for reset in progress also using the ICE_DCBNL_DEVRESET bit. Since the ICE_DCBNL_DEVRESET bit is not necessary for protecting the driver from DCBNL device resets and it is actually blocking changes coming from the DCBNL interface, remove the bit from the PF state and don't block driver function based on DCBNL reset in progress. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-29ice: prevent ice_open and ice_stop during resetKrzysztof Goreczny
There is a possibility of race between ice_open or ice_stop calls performed by OS and reset handling routine both trying to modify VSI resources. Observed scenarios: - reset handler deallocates memory in ice_vsi_free_arrays and ice_open tries to access it in ice_vsi_cfg_txq leading to driver crash - reset handler deallocates memory in ice_vsi_free_arrays and ice_close tries to access it in ice_down leading to driver crash - reset handler clears port scheduler topology and sets port state to ICE_SCHED_PORT_STATE_INIT leading to ice_ena_vsi_txq fail in ice_open To prevent this additional checks in ice_open and ice_stop are introduced to make sure that OS is not allowed to alter VSI config while reset is in progress. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Check FDIR program status for AVFQi Zhang
Enable returning FDIR completion status by checking the ctrl_vsi Rx queue descriptor value. To enable returning FDIR completion status from ctrl_vsi Rx queue, COMP_Queue and COMP_Report of FDIR filter programming descriptor needs to be properly configured. After program request sent to ctrl_vsi Tx queue, ctrl_vsi Rx queue interrupt will be triggered and completion status will be returned. Driver will first issue request in ice_vc_fdir_add_fltr(), then pass FDIR context to the background task in interrupt service routine ice_vc_fdir_irq_handler() and finally deal with them in ice_flush_fdir_ctx(). ice_flush_fdir_ctx() will check the descriptor's value, fdir context, and then send back virtual channel message to VF by calling ice_vc_add_fdir_fltr_post(). An additional timer will be setup in case of hardware interrupt timeout. Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-22ice: Add support for per VF ctrl VSI enablingQi Zhang
We are going to enable FDIR configure for AVF through virtual channel. The first step is to add helper functions to support control VSI setup. A control VSI will be allocated for a VF when AVF creates its first FDIR rule through ice_vf_ctrl_vsi_setup(). The patch will also allocate FDIR rule space for VF's control VSI. If a VF asks for flow director rules, then those should come entirely from the best effort pool and not from the guaranteed pool. The patch allow a VF VSI to have only space in the best effort rules. Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com> Signed-off-by: Yahui Cao <yahui.cao@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Chen Bo <BoX.C.Chen@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-22ice: Fix state bits on LLDP mode switchDave Ertman
DCBX_CAP bits were not being adjusted when switching between SW and FW controlled LLDP. Adjust bits to correctly indicate which mode the LLDP logic is in. Fixes: b94b013eb626 ("ice: Implement DCBNL support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: create scheduler aggregator node config and move VSIsKiran Patil
Create set scheduler aggregator node and move for VSIs into respective scheduler node. Max children per aggregator node is 64. There are two types of aggregator node(s) created. 1. dedicated node for PF and _CTRL VSIs 2. dedicated node(s) for VFs. As part of reset and rebuild, aggregator nodes are recreated and VSIs are moved to respective aggregator node. Having related VSIs in respective tree avoid starvation between PF and VF w.r.t Tx bandwidth. Co-developed-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Tarun Singh <tarun.k.singh@intel.com> Co-developed-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Victor Raj <victor.raj@intel.com> Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Add initial support framework for LAGDave Ertman
Add the framework and initial implementation for receiving and processing netdev bonding events. This is only the software support and the implementation of the HW offload for bonding support will be coming at a later time. There are some architectural gaps that need to be closed before that happens. Because this is a software only solution that supports in kernel bonding, SR-IOV is not supported with this implementation. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-08ice: Remove xsk_buff_pool from VSI structureMichal Swiatkowski
Current implementation of netdev already contains xsk_buff_pools. We no longer have to contain these structures in ice_vsi. Refactor the code to operate on netdev-provided xsk_buff_pools. Move scheduling napi on each queue to a separate function to simplify setup function. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-05ice: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct ice_res_tracker, instead of a one-element array and use the struct_size() helper to calculate the size for the allocations. Also, notice that the code below suggests that, currently, two too many bytes are being allocated with devm_kzalloc(), as the total number of entries (pf->irq_tracker->num_entries) for pf->irq_tracker->list[] is _vectors_ and sizeof(*pf->irq_tracker) also includes the size of the one-element array _list_ in struct ice_res_tracker. drivers/net/ethernet/intel/ice/ice_main.c:3511: 3511 /* populate SW interrupts pool with number of OS granted IRQs. */ 3512 pf->num_avail_sw_msix = (u16)vectors; 3513 pf->irq_tracker->num_entries = (u16)vectors; 3514 pf->irq_tracker->end = pf->irq_tracker->num_entries; With this change, the right amount of dynamic memory is now allocated because, contrary to one-element arrays which occupy at least as much space as a single object of the type, flexible-array members don't occupy such space in the containing structure. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Built-tested-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2024-05-28 23:59:11 +0000