summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbevf/ethtool.c
AgeCommit message (Collapse)Author
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <bruce.w.allan@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alek Loktionov <aleksandr.loktionov@intel.com> CC: Kevin Liedtke <kevin.d.liedtke@intel.com> CC: Aaron Rowden <aaron.f.rowden@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2020-03-12net: ixgbevf: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-06-28ixgbevf: Use cached link state instead of re-reading the value for ethtoolAlexander Duyck
Change the ethtool link settings call to just read the cached state out of the adapter structure instead of trying to recheck the value from the PF. Doing this should prevent excessive reading of the mailbox. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: "Guilherme G. Piccoli" <gpiccoli@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-28ixgbevf: enable VF IPsec offload operationsShannon Nelson
Add the IPsec initialization into the driver startup and add the Rx and Tx processing hooks. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23ixgbevf: Add XDP queue stats reportingTony Nguyen
XDP stats are included in TX stats, however, they are not reported in TX queue stats since they are setup on different queues. Add reporting for XDP queue stats to provide consistency between the total stats and per queue stats. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add support for XDP_TX actionTony Nguyen
This implements the XDP_TX action which is modeled on the ixgbe implementation. However instead of using CPU id to determine which XDP queue to use, this uses the received RX queue index, which is similar to i40e. Doing this eliminates the restriction that number of CPUs not exceed number of XDP queues that ixgbe has. Also, based on the number of queues available, the number of TX queues may be reduced when an XDP program is loaded in order to accommodate the XDP queues. Based largely on commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add XDP support for pass and drop actionsTony Nguyen
Implement XDP_PASS and XDP_DROP based on the ixgbe implementation. Based largely on commit 924708081629 ("ixgbe: add XDP support for pass and drop actions"). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add ethtool private flag for legacy RxEmil Tantilov
Introduce legacy-rx private flag that will allow switching between the old and new (build_skb based) Rx code paths. The implementation is the same as in commit e08912985b29 ("igb: Add support for ethtool private flag to allow use of legacy Rx") This provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add counters for Rx page allocationsEmil Tantilov
We already had placehloders for failed page and buffer allocations. Added alloc_rx_page and made sure the stats are properly updated and exposed in ethtool. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: Check for RSS key before setting valueTony Nguyen
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: fix size of queue stats lengthEmil Tantilov
IXGBEVF_QUEUE_STATS_LEN is based on ixgebvf_stats, not ixgbe_stats. This change fixes a bug where ethtool -S displayed some empty fields. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-18ixgbevf: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-03ixgbevf: get rid of custom busy polling codeEric Dumazet
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of code, we also remove one lock operation in fast path, and allow GRO to do its job. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ixgbevf: make use of BIT() macro to avoid shift of signed valuesJacob Keller
Also cleanup a case where we're bit shifting a value into place, and use an unsigned constant. Make use of the unsigned postfix in places where BIT() macro is not appropriate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: add support for per-queue ethtool statsEmil Tantilov
Implement per-queue statistics for packets, bytes and busy poll specific counters. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: refactor ethtool stats handlingEmil Tantilov
This brings the logic closer to how we handle the stats in ixgbe and it sets us up for introducing per-queue stats. Use IXGBEVF_STAT and IXGBEVF_NETDEV_STAT for accessing the driver and netdev stats respectively. This way we don't have to calculate the stats based on register values which could lead to the counters not being initialized properly when the interface is down. IXGBEVF_QUEUE_STATS_LEN is set to include the number of queues. Also some defines were renamed to use the IXGBEVF prefix. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-29ixgbevf: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23ixgbevf: Limit lowest interrupt rate for adaptive interrupt moderation to 12KAlexander Duyck
This patch is the ixgbevf version of commit 8ac34f10a5ea4 "ixgbe: Limit lowest interrupt rate for adaptive interrupt moderation to 12K" The same logic applies here as well as the same results since a netperf test will starve for memory in the time from one Tx interrupt to the next. As a result the ixgbevf driver underperformed when compared to vhost_net. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23ixgbevf: add support for reporting RSS key and hash table for X550Emil Tantilov
This patch extends the reporting of the RSS key and hash table by adding support for X550 VFs. The difference is that X550 VFs have their own registers for RSS key and indirection table, so there is no need to query the PF. The RSS key and indirection table are stored in the adapter structure during the configuration of VFRSSRK and VFRETA which in turn can be used in ethtool for reporting. The logic for writing VFRETA is also changed to make sure that the indirection table is reported correctly. In addition this patch adds defines for the VFRETA entries and number of VFRSSRK registers as well as some whitespace cleanups. Reported-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-11ixgbevf: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options for VF devices. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbevf: Fix code comments and whitespaceJeff Kirsher
Fix the code comments to align with drivers/net/ code commenting style, as well as whitespace issues. The whitespace issues resolve checkpatch errors, like lines exceeding 80 chars (except for strings) and the use of tabs where possible. CC: <kernel-team@fb.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2014-09-12ixgbevf: Resolve missing-field-initializers warningsMark Rustad
Resolve missing-field-initializers warnings by using designated initialization. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31ixgbevf: Change ixgbe_read_reg to ixgbevf_read_regMark Rustad
Change the ixgbe_read_reg function name to ixgbevf_read_reg to avoid a namespace clash with the ixgbe driver. This will allow ixgbe to take its register read function out-of-line to reduce memory footprint. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Additional adapter removal checksMark Rustad
Additional checks are needed for a detected removal not to cause problems. Some involve simply avoiding a lot of stuff that can't do anything good, and also cases where the phony return value can cause problems. In addition, down the adapter when the removal is sensed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Make the ethtool register test use accessorsMark Rustad
Make the ethtool register test use the normal register accessor functions. Also eliminate macros used for calling register test functions to make error exits clearer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-17ixgbevf: add tx countersEmil Tantilov
This patch adds counters for tx_restart_queue and tx_timeout_count. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: remove counters for Tx/Rx checksum offloadEmil Tantilov
This patch removes the Tx/Rx counters for checksum offload. The Tx counter was never updated and the Rx counter is of limited use. This is in effort to clean up the counters and make them consistent with the counters shown by ixgbe. Also this patch removes some members of the adapter structure that were never used and shuffles others to reduce number of holes. before: /* size: 1568, cachelines: 25, members: 48 */ /* sum members: 1519, holes: 10, sum holes: 43 */ /* padding: 6 */ /* last cacheline: 32 bytes */ after: /* size: 1480, cachelines: 24, members: 43 */ /* sum members: 1479, holes: 1, sum holes: 1 */ /* last cacheline: 8 bytes */ Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: move ring specific stats into ring specific structureEmil Tantilov
This patch moves hot-path specific statistics into the ring structure. This allows us to drop the adapter structure in some functions and should help with performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17ixgbevf: make use of the dev pointer in the ixgbevf_ring structEmil Tantilov
This patch cleans up the code by removing the adapter structure as parameter from multiple functions. The adapter structure was previously being used to access the dev pointer, but this can also be done via the ixgbevf_ring structure. This way we can drop the adapter as parameter from these functions. This patch also includes small cleanups in some error code paths. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16ixgbevf: Convert ring storage form pointer to an array to array of pointersDon Skidmore
This will change how we store rings arrays in the adapter sturct. We use to have a pointer to an array now we will be using an array of pointers. This will allow us to support multiple queues on muliple nodes at some point we would be able to reallocate the rings so that each is on a local node if needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ixgbevf: Add zero_base handler to network statisticsDon Skidmore
This patch removes the need to keep a zero_base variable in the adapter structure. Now we just use two different macros to set the non-zero and zero base. This adds to readability and shortens some of the structure initialization under 80 columns. The gathering of status for ethtool was slightly modified to again better fit into 80 columns and become a bit more readable. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: add BP_EXTENDED_STATS for CONFIG_NET_RX_BUSY_POLLJacob Keller
This patch adds the extended statistics similar to the ixgbe driver. These statistics keep track of how often the busy polling yields, as well as how many packets are cleaned or missed by the polling routine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-24ixgbevf: implement ethtool get/set coalesceJacob Keller
This patch adds support for ethtool's get_coalesce and set_coalesce command for the ixgbevf driver. This enables dynamically updating the minimum time between interrupts. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-01ixgbevf: do not print registers to dmesg in ixgbevf_get_regsJacob Keller
This patch removes the use of hw_dbg in ixgbevf when the ixgbe_get_regs function is called from ethtool. This goes along side a patch to ethtool which enables proper support for ixgbevf pretty-printing of registers. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28ixgbevf: Make sure link status and speed are fetchedGreg Rose
A recent change makes it necessary to set get_link_status to ensure that the driver fetches the correct, refreshed value for link status and speed when it has changed in the physical function device. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-18ixgbevf: Fix multiple issues in ixgbevf_get/set_ringparamAlexander Duyck
In ixgbevf_get_ringparam we could run into a NULL pointer dereference if the rings were not allocated when we attempted the call. To prevent that we can just access the tx/rx_ring_count values instead of attempting to access the rings to get the count. This change corrects a memory leak and memory corruption in ixgbevf_set_ringparam. The memory leak was due to us not freeing the resources from the ring before overwriting them. This change corrects the memory leak by making certain to call ixgbe_free_tx/rx_resources on the rings prior to freeing them. The memory corruption was because we were replacing the rings but not updating the q_vectors. It addresses the memory corruption by leaving the rings in place and instead just copying the contents of the new rings into the existing rings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-18ixgbevf: Add netdev to ring structureAlexander Duyck
This change adds the netdev to the ring structure. This allows for a quicker transition from ring to netdev without having to go from ring to adapter to netdev. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-17ixgbevf: Move Tx clean-up into NAPI contextAlexander Duyck
Currently the VF driver is processing all of the transmits in interrupt context. This can be messy since the Rx is all handled in NAPI and this may result in interrupts being disabled. In order to resolve this move all of the Tx packet processing into NAPI and combine all of the interrupt and polling routines into just a pair of functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-17ixgbevf: Drop all dead or unnecessary codeAlexander Duyck
There is a large amount of code present in this driver to support features that either do no exist or are not supported such ask packet split, DCA, or RSC. This patch strips out almost all of that code and in the case of conditionals based on unused flags I am flatting the code out to just the path that would have been selected. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-03ixgbevf: Add support to recognize 100mb link speedGreg Rose
The X540 10Gig controller is capable of linking at 100Mbits - add support for reporting that link speed. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-03ixgbevf: Update copyright noticesGreg Rose
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-01-19ixgbevf: make ethtool ops and strings constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a ↵Rick Jones
number of drivers Per discussion with Ben Hutchings and David Miller, go through and remove assignments of "N/A" to fw_version in various drivers' .get_drvinfo routines. While there clean-up some use of bare constants and such. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16ixgbevf: Convert printks to pr_<level>Jeff Kirsher
Based on the original patch from Joe Perches <joe@perches.com> Use the current logging styles, prefix output with "ixgbevf: " Add #define pr_fmt Coalesce formats. -v2 Fix-up to make checkpatch.pl compliant and remove change to copyright line CC: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Sibai Li <sibai.li@intel.com>
generated by cgit (git 2.34.1) at 2025-04-26 01:18:46 +0000