summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell/mvneta.c
AgeCommit message (Collapse)Author
2022-04-02net: mvneta: use .mac_select_pcs() interfaceRussell King (Oracle)
Convert mvneta to use the mac_select_interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-02net: mvneta: reorder initialisationRussell King (Oracle)
Re-order the mvneta initialisation to move devm based resources and easy setup earlier in the probe function. The primary reason for this is to allow us to switch the driver to use phylink's mac_select_pcs() callback. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to pcs_validate() and phylink_generic_validate()Russell King (Oracle)
Convert mvneta to validate the autoneg state for 1000base-X in the pcs_validate() operation, rather than the MAC validate() operation. This allows us to switch the MAC validate() to use phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to phylink pcs operationsRussell King
An initial stab at converting mvneta to PCS operations. There's a few FIXMEs to be solved. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16net: mvneta: convert to use mac_prepare()/mac_finish()Russell King
Convert mvneta to use the mac_prepare() and mac_finish() methods in preparation to converting mvneta to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13net: mvneta: mark as a legacy_pre_march2020 driverRussell King (Oracle)
mvneta provides mac_an_restart and mac_pcs_get_state methods, so needs to be marked as a legacy driver. Marek spotted that mvneta had stopped working in 2500base-X mode - thanks for reporting. Reported-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-01net: mvneta: program 1ms autonegotiation clock divisorRussell King
Program the 1ms autonegotiation clock divisor according to the clocking rate of neta - without this, the 1ms clock ticks at about 660us on Armada 38x configured for 250MHz. Bring this into correct specification. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/E1ms4WD-00EKLK-Ld@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29net: mvneta: Add TC traffic shaping offloadMaxime Chevallier
The mvneta controller is able to do some tocken-bucket per-queue traffic shaping. This commit adds support for setting these using the TC mqprio interface. The token-bucket parameters are customisable, but the current implementation configures them to have a 10kbps resolution for the rate limitation, since it allows to cover the whole range of max_rate values from 10kbps to 5Gbps with 10kbps increments. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: mvneta: Allow having more than one queue per TCMaxime Chevallier
The current mqprio implementation assumed that we are only using one queue per TC. Use the offset and count parameters to allow using multiple queues per TC. In that case, the controller will use a standard round-robin algorithm to pick queues assigned to the same TC, with the same priority. This only applies to VLAN priorities in ingress traffic, each TC corresponding to a vlan priority. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: mvneta: Don't force-set the offloading flagMaxime Chevallier
The qopt->hw flag is set by the TC code according to the offloading mode asked by user. Don't force-set it in the driver, but instead read it to make sure we do what's asked. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio configurationMaxime Chevallier
The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt, that allows passing extra parameters, such as traffic shaping. This commit converts the current mqprio code to that new struct. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: mvneta: use phylink_generic_validate()Russell King (Oracle)
Convert mvneta to use phylink_generic_validate() for the bulk of its validate() implementation. This network adapter has a restriction that for 802.3z links, autonegotiation must be enabled. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: mvneta: drop use of phylink_helper_basex_speed()Russell King (Oracle)
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function, and we can also get rid of our hack to indicate both 1000base-X and 2500base-X if the comphy is present to make that work. Remove this hack and use of phylink_helper_basex_speed(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: mvneta: remove interface checks in mvneta_validate()Russell King (Oracle)
As phylink checks the interface mode against the supported_interfaces bitmap, we no longer need to validate the interface mode in the validation function. Remove this to simplify it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: mvneta: populate supported_interfaces memberRussell King
Populate the phy_interface_t bitmap for the Marvell mvneta driver with interfaces modes supported by the MAC. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14net: mvneta: Delete unused variableYuval Shaia
The variable pp is not in use - delete it. Signed-off-by: Yuval Shaia <yshaia@marvell.com> Link: https://lore.kernel.org/r/20211013064921.26346-1-yshaia@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23net: marvell: fix MVNETA_TX_IN_PRGRS bit numberMaxim Kiselev
According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication. Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09page_pool: keep pp info as long as page pool owns the pageYunsheng Lin
Currently, page->pp is cleared and set everytime the page is recycled, which is unnecessary. So only set the page->pp when the page is added to the page pool and only clear it when the page is released from the page pool. This is also a preparation to support allocating frag page in page pool. Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: marvell: clean up trigraph warning on ??! stringColin Ian King
The character sequence ??! is a trigraph and causes the following clang warning: drivers/net/ethernet/marvell/mvneta.c:2604:39: warning: trigraph ignored [-Wtrigraphs] Clean this by replacing it with single ?. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net: mvneta: deny disabling autoneg for 802.3z modesRussell King (Oracle)
The documentation for Armada 38x says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvneta hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000002000 # 1000BASE-X Pause # ethtool -s ethX advertise 0xa000 # 2500BASE-X Pause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-03net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragmentLorenzo Bianconi
Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment routine even if the fragment contains only the ethernet FCS. Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24marvell: Remove rcu_read_lock() around XDP program invocationToke Høiland-Jørgensen
The mvneta and mvpp2 drivers have rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/20210624160609.292325-13-toke@redhat.com
2021-06-22net: marvell: return csum computation result from mvneta_rx_csum/mvpp2_rx_csumLorenzo Bianconi
This is a preliminary patch to add hw csum hint support to mvneta/mvpp2 xdp implementation Tested-by: Matteo Croce <mcroce@linux.microsoft.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-07mvneta: recycle buffersMatteo Croce
Use the new recycling API for page_pool. In a drop rate test, the packet rate increased by 10%, from 296 Kpps to 326 Kpps. perf top on a stock system shows: Overhead Shared Object Symbol 23.66% [kernel] [k] __pi___inval_dcache_area 22.85% [mvneta] [k] mvneta_rx_swbm 7.54% [kernel] [k] kmem_cache_alloc 6.49% [kernel] [k] eth_type_trans 3.94% [kernel] [k] dev_gro_receive 3.91% [kernel] [k] __netif_receive_skb_core 3.91% [kernel] [k] kmem_cache_free 3.76% [kernel] [k] page_pool_release_page 3.56% [kernel] [k] free_unref_page 2.40% [kernel] [k] build_skb 1.49% [kernel] [k] skb_release_data 1.45% [kernel] [k] __alloc_pages_bulk 1.30% [kernel] [k] page_frag_free And this is the same output with recycling enabled: Overhead Shared Object Symbol 26.41% [kernel] [k] __pi___inval_dcache_area 25.00% [mvneta] [k] mvneta_rx_swbm 8.14% [kernel] [k] kmem_cache_alloc 6.84% [kernel] [k] eth_type_trans 4.44% [kernel] [k] __netif_receive_skb_core 4.38% [kernel] [k] kmem_cache_free 4.16% [kernel] [k] dev_gro_receive 3.21% [kernel] [k] page_pool_put_page 2.41% [kernel] [k] build_skb 1.82% [kernel] [k] skb_release_data 1.61% [kernel] [k] napi_gro_receive 1.25% [kernel] [k] page_pool_refill_alloc_cache 1.16% [kernel] [k] __netif_receive_skb_list_core We can see that page_pool_release_page(), free_unref_page() and __alloc_pages_bulk() are no longer on top of the list when receiving traffic. The test was done with mausezahn on the TX side with 64 byte raw ethernet frames. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net: marvell: Delete extra spacesYangyang Li
Just delete three extra spaces. Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net: marvell: Fix the trailing format of some block commentsYangyang Li
Use a trailing */ on a separate line for block comments. Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net: marvell: Delete duplicate word in commentsYangyang Li
Delete duplicate word in two comments. Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-02-16net: mvneta: Implement mqprio supportMaxime Chevallier
Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. The TX logic stays the same as when we don't offload the qdisc. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Remove per-cpu queue mapping for Armada 3700Maxime Chevallier
According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-08net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-06net: mvneta: fix error message when MTU too large for XDPMarek Behún
The error message says that "Jumbo frames are not supported on XDP", but the code checks for mtu > MVNETA_MAX_RX_BUF_SIZE, not mtu > 1500. Fix this error message. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20210105172333.21613-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-24net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stackLorenzo Bianconi
Build skb_shared_info on mvneta_rx_swbm stack and sync it to xdp_buff skb_shared_info area only on the last fragment. Leftover cache miss in mvneta_swbm_rx_frame will be addressed introducing mb bit in xdp_buff/xdp_frame struct Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-09 08:40:31 +0000