Age | Commit message (Collapse) | Author |
|
Implements the below requirement mentioned
in the representors documentation.
"
The representee's link state is controlled through the
representor. Setting the representor administratively UP
or DOWN should cause carrier ON or OFF at the representee.
"
This patch enables
- Reflecting the link state of representor based on the VF state and
link state of VF based on representor.
- On VF interface up/down a notification is sent via mbox to representor
to update the link state.
eg: ip link set eth0 up/down will disable carrier on/off
of the corresponding representor(r0p1) interface.
- On representor interface up/down will cause the link state update of VF.
eg: ip link set r0p1 up/down will disable carrier on/off
of the corresponding representee(eth0) interface.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support to export VF port statistics via representor
netdev. Defines new mbox "NIX_LF_STATS" to fetch VF hw stats.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current HW, do not support in-built switch which will forward pkts
between representee and representor. When representor is put under
a bridge and pkts needs to be sent to representee, then pkts from
representor are sent on a HW internal loopback channel, which again
will be punted to ingress pkt parser. Now the rules that this patch
installs are the MCAM filters/rules which will match against these
pkts and forward them to representee.
The rules that this patch installs are for basic
representor <=> representee path similar to Tun/TAP between VM and
Host.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements basic set of net_device_ops.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds initial devlink support to set/get the switchdev mode.
Representor netdevs are created for each rvu devices when
the switch mode is set to 'switchdev'. These netdevs are
be used to control and configure VFs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds basic driver for the RVU representor.
Driver on probe does pci specific initialization and
does hw resources configuration. Introduces RVU_ESWITCH
kernel config to enable/disable the driver. Representor
and NIC shares the code but representors netdev support
subset of NIC functionality. Hence "otx2_rep_dev" API
helps to skip the features initialization that are not
supported by the representors.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink knobs to enable/disable counters on NPC
default rule entries.
Sample command to enable default rule counters:
devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime
Sample command to read the counter:
cat /sys/kernel/debug/cn10k/npc/mcam_rules
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20241105125620.2114301-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule
for better code reuse, which assumes necessary locks are taken at
higher level.
These low level functions would be used for implementing default rule
counter APIs in the subsequent patch.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241105125620.2114301-2-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move mbox, hw resources and interrupt configuration functions to common
header file. So, that they can be used later by the RVU representor driver.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-5-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reuse the maximum support HW MTU value that is fetch during probe.
Instead of fetching through mbox each time mtu is changed as the
value is fixed for interface.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-4-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the queue(RX/TX/CQ) memory allocation and free code to single APIs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-3-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new API "otx2_init_rsrc" and move the HW blocks
NIX/NPA resources configuration code under this API. So, that
it can be used by the RVU representor driver that has similar
resources of RVU NIC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-2-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024195833.176843-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer checks after calling otx2_mbox_get_rsp().
Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block")
Fixes: fa5e0ccb8f3a ("octeontx2-pf: Add support for exact match table.")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 2ca89a2c3752 ("octeontx2-pf: TC_MATCHALL ingress ratelimiting offload")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Adding error pointer check after calling otx2_mbox_get_rsp().
Fixes: 9917060fc30a ("octeontx2-pf: Cleanup flow rule management")
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Fixes: 674b3e164238 ("octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Fixes: d0cf9503e908 ("octeontx2-pf: ethtool fec mode support")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: ab58a416c93f ("octeontx2-pf: cn10k: Get max mtu supported from admin function")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The left shift int 32 bit integer constants 1 is evaluated using 32 bit
arithmetic and then assigned to a 64 bit unsigned integer. In the case
where the shift is 32 or more this can lead to an overflow. Avoid this
by shifting using the BIT_ULL macro instead.
Fixes: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20241010154519.768785-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert struct rvu_block block to const struct rvu_block *block in
get_lf_str_list() function parameter. This improves efficiency by
avoiding structure copying and reflects the function's read-only
access to block.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001110542.5404-2-riyandhiman14@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In otx2_sqe_add_ext() iplen is used to hold a 16-bit big-endian value,
but it's type is u16, indicating a host byte order integer.
Address this mismatch by changing the type of iplen to __be16.
Flagged by Sparse as:
.../otx2_txrx.c:699:31: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:699:31: expected unsigned short [usertype] iplen
.../otx2_txrx.c:699:31: got restricted __be16 [usertype]
.../otx2_txrx.c:701:54: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:701:54: expected restricted __be16 [usertype] tot_len
.../otx2_txrx.c:701:54: got unsigned short [usertype] iplen
.../otx2_txrx.c:704:60: warning: incorrect type in assignment (different base types)
.../otx2_txrx.c:704:60: expected restricted __be16 [usertype] payload_len
.../otx2_txrx.c:704:60: got unsigned short [usertype] iplen
Introduced in
commit dc1a9bf2c816 ("octeontx2-pf: Add UDP segmentation offload support")
No functional change intended.
Compile tested only by author.
Tested-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-2-14f2305fe4b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of alloc_workqueue()
is potentially insecure.
E.g. clang-18 says:
.../rvu.c:2493:32: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
2493 | mw->mbox_wq = alloc_workqueue(name,
| ^~~~
.../rvu.c:2493:32: note: treat the string as an argument to avoid this
2493 | mw->mbox_wq = alloc_workqueue(name,
| ^
| "%s",
It is always the case where the contents of name is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only by author.
Tested-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904-octeontx2-sparse-v2-1-14f2305fe4b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20240901112803.212753-15-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates the driver to use a dynamic number of vectors instead
of a hard-coded value. This change accommodates the CN10KB, which has 2
vectors, unlike the previously supported chips that have 3 vectors.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.
Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.
Fixes: bc35e28af789 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
First part of "net: Make timestamping selectable" from Kory Maincent.
Change the driver-facing type already to lower rebasing pain.
Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5cd6 ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c64 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3c2 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rvu_check_rsrc_availability()
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 746ea74241fa ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Octeontx2 hardware uses Near Data Cache(NDC) block to cache
contexts in it so that access to LLC/DRAM can be avoided.
It is recommended in HRM to sync the NDC contents before
releasing/resetting LF resources. Hence implement NDC_SYNC
mailbox and sync contexts during driver teardown.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix unintended sign extension and klockwork issues. These are not real
issue but for sanity checks.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing method of reserving unicast filter count leads to wasted
MCAM entries if the functionality is not used or fewer entries are used.
Furthermore, the amount of MCAM entries differs amongst Octeon SoCs.
We implemented a means to adjust the UC filter count via devlink,
allowing for better use of MCAM entries across Netdev apps.
commands:
To get the current unicast filter count
# devlink dev param show pci/0002:02:00.0 name unicast_filter_count
To change/set the unicast filter count
# devlink dev param set pci/0002:02:00.0 name unicast_filter_count
value 5 cmode runtime
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes the below build warning messages that are
caused due to linking same files to multiple modules by
exporting the required symbols.
"scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile:
otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf"
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside()
to unoffload VLANs - push them from skb meta data into skb data.
However, it omitts a check for __vlan_hwaccel_push_inside()
returning NULL.
Found by inspection based on [1] and [2].
Compile tested only.
[1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/
[2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs
https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/
Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload")
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|