summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mediatek
AgeCommit message (Collapse)Author
2022-04-14net: mtk_eth_soc: partially convert to phylink_pcsRussell King (Oracle)
Partially convert mtk_eth_soc to phylink_pcs, moving the configuration, link up and AN restart over. However, it seems mac_pcs_get_state() doesn't actually get the state from the PCS, so we can't convert that over without a better understanding of the hardware. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: convert code structure to suit split PCS supportRussell King (Oracle)
Provide a mtk_pcs structure which encapsulates everything that the PCS functions need (the regmap and ana_rgc3 offset), and use this in the PCS functions. Provide shim functions to convert from the existing "mtk_sgmii_*" interface to the converted PCS functions. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: move restoration of SYSCFG0 to mac_finish()Russell King (Oracle)
The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a disabled state. In order to preserve this when we switch to phylink_pcs we need to move the restoration of this register to the mac_finish() callback. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: move MAC_MCR setting to mac_finish()Russell King (Oracle)
Move the setting of the MTK_MAC_MCR register from the end of mac_config into the phylink mac_finish() method, to keep it as the very last write that is done during configuration. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: add fixme comment for state->speed useRussell King (Oracle)
Add a fixme comment for the last remaining incorrect usage of state->speed in the mac_config() method, which is strangely in a code path which is only run when the PHY interface mode changes. This means if we are in RGMII mode, changes in state->speed will not cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to be set according to the speed, nor will the TRGPLL clock be set to the correct value. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: provide mtk_sgmii_config()Russell King (Oracle)
Provide mtk_sgmii_config() to wrap up the decisions about which SGMII configuration will be called. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: stop passing phylink state to sgmii setupRussell King (Oracle)
Now that mtk_sgmii_setup_mode_force() only uses the interface mode from the phylink state, pass just the interface mode into this function. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: correct 802.3z duplex settingRussell King
Phylink does not guarantee that state->duplex will be set correctly in the mac_config() call, so it's a bug that the driver makes use of it. Move the 802.3z PCS duplex configuration to mac_link_up(). Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: correct 802.3z speed settingRussell King (Oracle)
Phylink does not guarantee that state->speed will be set correctly in the mac_config() call, so it's a bug that the driver makes use of it. Moreover, it is making use of it in a function that is only ever called for 1000BASE-X and 2500BASE-X which operate at a fixed speed which happens to be the same setting irrespective of the interface mode. We can simply remove the switch statement and just set the SGMII interface speed. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: add mask and update PCS speed definitionsRussell King (Oracle)
The PCS speed setting is a two bit field, but it is defined as two separate bits. Add a bitfield mask for the speed definitions, and use the FIELD_PREP() macro to define each PCS speed. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: remove unused sgmii flagsRussell King (Oracle)
The "flags" member of struct mtk_sgmii appears to be unused, as are the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-04-14net: mtk_eth_soc: remove unused mac->modeRussell King (Oracle)
mac->mode is only ever written to in one location, and is thus superflous. Remove it. Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-15net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()Tom Rix
Clang static analysis reports this problem mtk_eth_soc.c:394:7: warning: Branch condition evaluates to a garbage value if (err) ^~~ err is not initialized and only conditionally set. So intitialize err. Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05net: ethernet: mtk_eth_soc: implement Clause 45 MDIO accessDaniel Golle
Implement read and write access to IEEE 802.3 Clause 45 Ethernet phy registers while making use of new mdiobus_c45_regad and mdiobus_c45_devad helpers. Tested on the Ubiquiti UniFi 6 LR access point featuring MediaTek MT7622BV WiSoC with Aquantia AQR112C. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-05net: ethernet: mtk_eth_soc: fix return values and refactor MDIO opsDaniel Golle
Instead of returning -1 (-EPERM) when MDIO bus is stuck busy while writing or 0xffff if it happens while reading, return the appropriate -ETIMEDOUT. Also fix return type to int instead of u32. Refactor functions to use bitfield helpers instead of having various masking and shifting constants in the code, which also results in the register definitions in the header file being more obviously related to what is stated in the MediaTek's Reference Manual. Fixes: 656e705243fd0 ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-17net: ethernet: mtk_eth_soc: delete some dead codeDan Carpenter
The debugfs_create_dir() function never returns NULL. It does return error pointers but in normal situations like this there is no need to check for errors. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217071037.GE26548@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net: mtk_eth_soc: delete an unneeded variableDan Carpenter
There is already an "int err" declared at the start of the function so re-use that instead of declaring a shadow err variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217070735.GC26548@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-13net: mtk_eth: add COMPILE_TEST supportLorenzo Bianconi
Improve the build testing of mtk_eth drivers by enabling them when COMPILE_TEST is selected. Moreover COMPILE_TEST will be useful for the driver development. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-09net: mtk_eth_soc: mark as a legacy_pre_march2020 driverRussell King (Oracle)
mtk_eth_soc has not been updated for commit 7cceb599d15d ("net: phylink: avoid mac_config calls"), and makes use of state->speed and state->duplex in contravention of the phylink documentation. This makes reliant on the legacy behaviours, so mark it as a legacy driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17net: mtk_eth_soc: use phylink_generic_validate()Russell King (Oracle)
mtk_eth_soc has no special behaviour in its validation implementation, so can be switched to phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: mtk_eth_soc: drop use of phylink_helper_basex_speed()Russell King (Oracle)
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function, and we can also get rid of our hack to indicate both 1000base-X and 2500base-X if the comphy is present to make that work. Remove this hack and use of phylink_helper_basex_speed(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: mtk_eth_soc: remove interface checks in mtk_validate()Russell King (Oracle)
As phylink checks the interface mode against the supported_interfaces bitmap, we no longer need to validate the interface mode, nor handle PHY_INTERFACE_MODE_NA in the validation function. Remove these to simplify the implementation. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: mtk_eth_soc: populate supported_interfaces memberRussell King (Oracle)
Populate the phy interface mode bitmap for the Mediatek driver with interfaces modes supported by the MAC. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-08ethernet: use platform_get_ethdev_address()Jakub Kicinski
Use the new platform_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, net; @@ - eth_platform_get_mac_address(dev, net->dev_addr) + platform_get_ethdev_address(dev, net) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: ethernet: mtk_eth_soc: avoid creating duplicate offload entriesFelix Fietkau
Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-23net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88Stefan Roese
The MT7628/88 SoC(s) have other (limited) packet counter registers than currently supported in the mtk_eth_soc driver. This patch adds support for reading these registers, so that the packet statistics are correctly updated. Additionally the defines for the non-MT7628 variant packet counter registers are added and used in this patch instead of using hard coded values. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: ethernet: mtk_eth_soc: Fix DIM support for MT7628/88Stefan Roese
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA initIlya Lipnitskiy
Replace a tight busy-wait loop without a pause with a standard readx_poll_timeout_atomic routine with a 5 us poll period. Tested by booting a MT7621 device to ensure the driver initializes properly. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if presentFelix Fietkau
This improves GRO performance Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: Use MTK_RXD4_FOE_ENTRY instead of GENMASK(13, 0)] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: rework NAPI callbacksIlya Lipnitskiy
Use napi_complete_done to communicate total TX and RX work done to NAPI. Count total RX work up instead of remaining work down for clarity. Remove unneeded local variables for clarity. Use do {} while instead of goto for clarity. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: reduce unnecessary interruptsFelix Fietkau
Avoid rearming interrupt if napi_complete returns false Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: only read the full RX descriptor if DMA is doneFelix Fietkau
Uncached memory access is expensive, and there is no need to access all descriptor words if we can't process them anyway Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX descriptorFelix Fietkau
The value is only updated by the CPU, so it is cheaper to access from the ring data structure than from a hardware register. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: implement dynamic interrupt moderationFelix Fietkau
Reduces the number of interrupts under load Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: add documentation for new struct fields] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: increase DMA ring sizesFelix Fietkau
256 descriptors is not enough for multi-gigabit traffic under load on MT7622. Bump it to 512 to improve performance. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use larger burst size for QDMA TXFelix Fietkau
Improves tx performance Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: remove unnecessary TX queue stopsFelix Fietkau
When running short on descriptors, only stop the queue for the netdev that tx was attempted for. By the time something tries to send on the other netdev, the ring might have some more room already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: reduce MDIO bus access latencyFelix Fietkau
usleep_range often ends up sleeping much longer than the 10-20us provided as a range here. This causes significant latency in mdio bus acceses, which easily adds multiple seconds to the boot time on MT7621 when polling DSA slave ports. Use cond_resched instead of usleep_range, since the MDIO access does not take much time Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: use napi_consume_skbFelix Fietkau
Should improve performance, since it can use bulk free Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: fix build_skb cleanupIlya Lipnitskiy
In case build_skb fails, call skb_free_frag on the correct pointer. Also update the DMA structures with the new mapping before exiting, because the mapping was successful Suggested-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: unmap RX data before calling build_skbFelix Fietkau
Since build_skb accesses the data area (for initializing shinfo), dma unmap needs to happen before that call Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: split build_skb cleanup fix into a separate commit] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-23net: ethernet: mtk_eth_soc: fix RX VLAN offloadFelix Fietkau
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is set. Fixes frames wrongly marked with VLAN tags. Signed-off-by: Felix Fietkau <nbd@nbd.name> [Ilya: fix commit message] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: handle VLAN pop actionPablo Neira Ayuso
Do not hit EOPNOTSUPP when flowtable offload provides a VLAN pop action. Fixes: efce49dfe6a8 ("netfilter: flowtable: add vlan pop action offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: missing mutexPablo Neira Ayuso
Patch 2ed37183abb7 ("netfilter: flowtable: separate replace, destroy and stats to different workqueues") splits the workqueue per event type. Add a mutex to serialize updates. Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: fix undefined reference to `dsa_port_from_netdev'Pablo Neira Ayuso
Caused by: CONFIG_NET_DSA=m CONFIG_NET_MEDIATEK_SOC=y mtk_ppe_offload.c:undefined reference to `dsa_port_from_netdev' Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mediatek: fix a typo bug in flow offloadingDENG Qingfang
Issue was traffic problems after a while with increased ping times if flow offload is active. It turns out that key_offset with cookie is needed in rhashtable_params but was re-assigned to head_offset. Fix the assignment. Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-16net: ethernet: mediatek: ppe: fix busy wait loopIlya Lipnitskiy
The intention is for the loop to timeout if the body does not succeed. The current logic calls time_is_before_jiffies(timeout) which is false until after the timeout, so the loop body never executes. Fix by using readl_poll_timeout as a more standard and less error-prone solution. Fixes: ba37b7caf1ed ("net: ethernet: mtk_eth_soc: add support for initializing the PPE") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Felix Fietkau <nbd@nbd.name> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-18 12:52:35 +0000