summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlx5/core/en_accel
AgeCommit message (Collapse)Author
2019-10-18net/mlx5e: kTLS, Enhance TX resync flowTariq Toukan
Once the kTLS TX resync function is called, it used to return a binary value, for success or failure. However, in case the TLS SKB is a retransmission of the connection handshake, it initiates the resync flow (as the tcp seq check holds), while regular packet handle is expected. In this patch, we identify this case and skip the resync operation accordingly. Counters: - Add a counter (tls_skip_no_sync_data) to monitor this. - Bump the dump counters up as they are used more frequently. - Add a missing counter descriptor declaration for tls_resync_bytes in sq_stats_desc. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Save a copy of the crypto infoTariq Toukan
Do not assume the crypto info is accessible during the connection lifetime. Save a copy of it in the private TX context. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Remove unneeded cipher type checksTariq Toukan
Cipher type is checked upon connection addition. No need to recheck it per every TX resync invocation. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Limit DUMP wqe sizeTariq Toukan
HW expects the data size in DUMP WQEs to be up to MTU. Make sure they are in range. We elevate the frag page refcount by 'n-1', in addition to the one obtained in tx_sync_info_get(), having an overall of 'n' references. We bulk increments by using a single page_ref_add() command, to optimize perfermance. The refcounts are released one by one, by the corresponding completions. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Fix missing SQ edge fillTariq Toukan
Before posting the context params WQEs, make sure there is enough contiguous room for them, and fill frag edge if needed. When posting only a nop, no need for room check, as it needs a single WQEBB, meaning no contiguity issue. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Fix page refcnt leak in TX resync error flowTariq Toukan
All references for frag pages that are obtained in tx_sync_info_get() should be released. Release usually occurs in the corresponding CQE of the WQE. In error flows, not all fragments have a WQE posted for them, hence no matching CQE will be generated. For these pages, release the reference in the error flow. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Save by-value copy of the record fragsTariq Toukan
Access the record fragments only under the TLS ctx lock. In the resync flow, save a copy of them to be used when preparing and posting the required DUMP WQEs. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Save only the frag page to release at completionTariq Toukan
In TX resync flow where DUMP WQEs are posted, keep a pointer to the fragment page to unref it upon completion, instead of saving the whole fragment. In addition, move it the end of the arguments list in tx_fill_wi(). Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Size of a Dump WQE is fixedTariq Toukan
No Eth segment, so no dynamic inline headers. The size of a Dump WQE is fixed, use constants and remove unnecessary checks. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-10-18net/mlx5e: kTLS, Release reference on DUMPed fragments in shutdown flowTariq Toukan
A call to kTLS completion handler was missing in the TXQSQ release flow. Add it. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-05net/mlx5e: kTLS, Remove unused function parameterTariq Toukan
SKB parameter is no longer used in tx_post_resync_dump(), remove it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-30net/mlx5e: Remove unlikely() from WARN*() conditionDenis Efremov
"unlikely(WARN_ON_ONCE(x))" is excessive. WARN_ON_ONCE() already uses unlikely() internally. Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Boris Pismenny <borisp@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22net/mlx5e: Remove ethernet segment from dump WQEEran Ben Elisha
Dump WQE shall not include Ethernet segment. Define mlx5e_dump_wqe to be used for "Dump WQEs" instead of sharing it with the general mlx5e_tx_wqe layout. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-22net/mlx5e: Add num bytes metadata to WQE infoEran Ben Elisha
For TLS WQEs, metadata info did not include num_bytes. Due to this issue, tx_tls_dump_bytes counter did not increment. Modify tx_fill_wi() to fill num bytes. When it is called for non-traffic WQE, zero is expected. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-21treewide: remove dummy Makefiles for single targetsMasahiro Yamada
Now that the single target build descends into sub-directories in the same way as the normal build, these dummy Makefiles are not needed any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-08net/mlx5e: kTLS, Fix tisn field placementTariq Toukan
Shift the tisn field in the WQE control segment, per the HW specification. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-08net/mlx5e: kTLS, Fix tisn field nameTariq Toukan
Use the proper tisn field name from the union in struct mlx5_wqe_ctrl_seg. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-08net/mlx5e: kTLS, Fix progress params context WQE layoutTariq Toukan
The TLS progress params context WQE should not include an Eth segment, drop it. In addition, align the tls_progress_params layout with the HW specification document: - fix the tisn field name. - remove the valid bit. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-25net/mlx5e: kTLS, Call WARN_ONCE on netdev mismatchTariq Toukan
A netdev mismatch in the processed TLS SKB should not occur, and indicates a kernel bug. Add WARN_ONCE to spot such cases. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-12net/mlx5e: Convert single case statement switch statements into if statementsNathan Chancellor
During the review of commit 1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params"), Leon and Nick pointed out that the switch statements can be converted to single if statements that return early so that the code is easier to follow. Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net/mlx5e: Return in default case statement in tx_post_resync_paramsNathan Chancellor
clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:251:2: warning: variable 'rec_seq_sz' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:255:46: note: uninitialized use occurs here skip_static_post = !memcmp(rec_seq, &rn_be, rec_seq_sz); ^~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:239:16: note: initialize the variable 'rec_seq_sz' to silence this warning u16 rec_seq_sz; ^ = 0 1 warning generated. This case statement was clearly designed to be one that should not be hit during runtime because of the WARN_ON statement so just return early to prevent copying uninitialized memory up into rn_be. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Link: https://github.com/ClangBuiltLinux/linux/issues/590 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().David S. Miller
Return value was changes to 'int' from void but this return statement was not updated, or it slipped in via a merge. Fixes: b5d9a834f4fd ("net/tls: don't clear TX resync flag on error") Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net/tls: don't clear TX resync flag on errorDirk van der Merwe
Introduce a return code for the tls_dev_resync callback. When the driver TX resync fails, kernel can retry the resync again until it succeeds. This prevents drivers from attempting to offload TLS packets if the connection is known to be out of sync. We don't worry about the RX resync since they will be retried naturally as more encrypted records get received. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Add kTLS TX HW offload supportTariq Toukan
Add support for transmit side kernel-TLS acceleration. Offload the crypto encryption to HW. Per TLS connection: - Use a separate TIS to maintain the HW context. - Use a separate encryption key. - Maintain static and progress HW contexts by posting the proper WQEs at creation time, or upon resync. - Use a special DUMP opcode to replay the previous frags and sync the HW context. To make sure the SQ is able to serve an xmit request, increase SQ stop room to cover: - static params WQE, - progress params WQE, and - resync DUMP per frag. Currently supporting TLS 1.2, and key size 128bit. Tested over SimX simulator. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Tx, Make SQ WQE fetch function type genericTariq Toukan
Change mlx5e_sq_fetch_wqe to be agnostic to the Work Queue Element (WQE) type. Before this patch, it was specific for struct mlx5e_tx_wqe. In order to allow the change, the function now returns the generic void pointer, and gets the WQE size to do the zero memset. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net/mlx5e: Move helper functions to a new txrx datapath headerTariq Toukan
Take datapath helper functions to a new header file en/txrx.h. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net/tls: generalize the resync callbackJakub Kicinski
Currently only RX direction is ever resynced, however, TX may also get out of sequence if packets get dropped on the way to the driver. Rename the resync callback and add a direction parameter. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11net/tls: pass record number as a byte arrayJakub Kicinski
TLS offload code casts record number to a u64. The buffer should be aligned to 8 bytes, but its actually a __be64, and the rest of the TLS code treats it as big int. Make the offload callbacks take a byte array, drivers can make the choice to do the ugly cast if they want to. Prepare for copying the record number onto the stack by defining a constant for max size of the byte array. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01drivers: mellanox: use netdev_xmit_more() helperFlorian Westphal
skb->xmit_more hint is now always 0. This switches the mellanox drivers to the netdev_xmit_more() helper. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Boris Pismenny <borisp@mellanox.com> Cc: Ilya Lesokhin <ilyal@mellanox.com> Cc: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22net/mlx5e: TX, Add geneve tunnel stateless offload supportMoshe Shemesh
Currently support only default geneve udp port (6081). For the tx side, the HW is assisted by SW parsing, which sets the headers offset to offload tunneled LSO and csum. Note that for udp tunnels, we don't use special rx offloads, as rss on the outer headers is enough, we support checksum complete and GRO takes care of aggregation. Geneve TSO BW and CPU load results (tested using iperf single tcp stream). In this patch we add TSO support over Geneve, so the "before" result doesn't actually get to using the TSO HW offload even when turned on. Tested on ConnectX-5, Intel(R) Xeon(R) CPU E5-2660 v2 @2.20GHz. __________________________________ | Before | After | |________________|_________________| | 12.6 Gbits/sec | 21.7 Gbits/sec | | 100% CPU load | 61.5% CPU load | |________________|_________________| Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Take SW parser code to a separate functionMoshe Shemesh
Refactor mlx5e_ipsec_set_swp() code, split the part which sets the eseg software parser (SWP) offsets and flags, so it can be used in a downstream patch by other mlx5e functionality which needs to set eseg SWP. The new function mlx5e_set_eseg_swp() is useful for setting swp for both outer and inner headers. It also handles the special ipsec case of xfrm mode transfer. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-19xfrm: prefer secpath_set over secpath_dupFlorian Westphal
secpath_set is a wrapper for secpath_dup that will not perform an allocation if the secpath attached to the skb has a reference count of one, i.e., it doesn't need to be COW'ed. Also, secpath_dup doesn't attach the secpath to the skb, it leaves this to the caller. Use secpath_set in places that immediately assign the return value to skb. This allows to remove skb->sp without touching these spots again. secpath_dup can eventually be removed in followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19drivers: net: ethernet: mellanox: use skb_sec_path helperFlorian Westphal
Will avoid touching this when sp pointer is removed from sk_buff struct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net/mlx5e: TLS, Read capabilities only when it is safeSaeed Mahameed
Read TLS caps from the core driver only when TLS is supported, i.e mlx5_accel_is_tls_device returns true. Fixes: 790af90c00d2 ("net/mlx5e: TLS, build TLS netdev from capabilities") Change-Id: I5f21ff4d684901af487e366a7e0cf032b54ee9cf Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-08-06mellanox: fix the dport endianness in call of __inet6_lookup_established()Al Viro
__inet6_lookup_established() expect th->dport passed in host-endian, not net-endian. The reason is microoptimization in __inet6_lookup(), but if you use the lower-level helpers, you have to play by their rules... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net/mlx5e: Use PARTIAL_GSO for UDP segmentationBoris Pismenny
This patch removes the splitting of UDP_GSO_L4 packets in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack is not responsible for splitting the packet into two. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-16net/mlx5e: IPsec, fix byte count in CQEBoris Pismenny
This patch fixes the byte count indication in CQE for processed IPsec packets that contain a metadata header. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5: Accel, add common metadata functionsBoris Pismenny
This patch adds common functions to handle mellanox metadata headers. These functions are used by IPsec and TLS to process FPGA metadata. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, build TLS netdev from capabilitiesBoris Pismenny
This patch enables TLS Rx based on available HW capabilities. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add software statisticsBoris Pismenny
This patch adds software statistics for TLS to count important events. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add Innova TLS rx data pathBoris Pismenny
Implement the TLS rx offload data path according to the requirements of the TLS generic NIC offload infrastructure. Special metadata ethertype is used to pass information to the hardware. When hardware loses synchronization a special resync request metadata message is used to request resync. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, add innova rx supportBoris Pismenny
Add the mlx5 implementation of the TLS Rx routines to add/del TLS contexts, also add the tls_dev_resync_rx routine to work with the TLS inline Rx crypto offload infrastructure. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx5e: TLS, refactor variable namesBoris Pismenny
For symmetry, we rename mlx5e_tls_offload_context to mlx5e_tls_offload_context_tx before we add mlx5e_tls_offload_context_rx. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tls: Refactor tls_offload variable namesBoris Pismenny
For symmetry, we rename tls_offload_context to tls_offload_context_tx before we add tls_offload_context_rx. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28net/mlx5e: Add UDP GSO remaining counterBoris Pismenny
This patch adds a counter for tx UDP GSO packets that contain a segment that is not aligned to MSS - remaining segment. Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-28net/mlx5e: Add UDP GSO supportBoris Pismenny
This patch enables UDP GSO support. We enable this by using two WQEs the first is a UDP LSO WQE for all segments with equal length, and the second is for the last segment in case it has different length. Due to HW limitation, before sending, we must adjust the packet length fields. We measure performance between two Intel(R) Xeon(R) CPU E5-2643 v2 @3.50GHz machines connected back-to-back with Connectx4-Lx (40Gbps) NICs. We compare single stream UDP, UDP GSO and UDP GSO with offload. Performance: | MSS (bytes) | Throughput (Gbps) | CPU utilization (%) UDP GSO offload | 1472 | 35.6 | 8% UDP GSO | 1472 | 25.5 | 17% UDP | 1472 | 10.2 | 17% UDP GSO offload | 1024 | 35.6 | 8% UDP GSO | 1024 | 19.2 | 17% UDP | 1024 | 5.7 | 17% UDP GSO offload | 512 | 33.8 | 16% UDP GSO | 512 | 10.4 | 17% UDP | 512 | 3.5 | 17% Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-25net/mlx5e: Avoid reset netdev stats on configuration changesEran Ben Elisha
Move all RQ, SQ and channel counters from the channel objects into the priv structure. With this change, counters will not be reset upon channel configuration changes. Channel's statistics for SQs which are associated with TCs higher than zero will be presented in ethtool -S, only for SQs which were opened at least once since the module was loaded (regardless of their open/close current status). This is done in order to decrease the total amount of statistics presented and calculated for the common out of box use (no QoS). mlx5e_channel_stats is a compound of CH,RQ,SQs stats in order to create locality for the NAPI when handling TX and RX of the same channel. Align the new statistics struct per ring to avoid several channels update to the same cache line at the same time. Packet rate was tested, no degradation sensed. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Qing Huang <qing.huang@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-14net/mlx5e: Use test bit in en accel xmit flowGal Pressman
Replace (mask & bit) check with test_bit. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2024-05-23 18:07:51 +0000