summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c
AgeCommit message (Collapse)Author
2019-03-31mlxsw: spectrum_acl: Rename rehash_dis traceJiri Pirko
The name of the trace is no longer correct, since there is no disable of rehash done. So name it "rehash_rollback_failed". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31mlxsw: spectrum_acl: Remove failed_rollback dead endJiri Pirko
Currently if a rollback ends with error, the vregion is in a zombie state until end of the existence. Instead of that, rather try to continue where rollback ended later on (after rehash interval). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31mlxsw: spectrum_acl: Move rehash_dis trace call and err msg to vregion_migrate()Jiri Pirko
Move the call of rehash_dis trace and the error message to vregion_migrate() next to the failed_rollback flag set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31mlxsw: spectrum_acl: Remove redundant failed_rollback from migrate_start()Jiri Pirko
The flag is set by the caller mlxsw_sp_acl_tcam_vregion_migrate() anyway, so don't set it here. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Make mlxsw_sp_acl_tcam_vregion_rehash() return voidJiri Pirko
The return value is ignored anyway, so just return void. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Remember where to continue rehash migrationJiri Pirko
Store pointer to vchunk where the migration was interrupted, as well as ventry pointer to start from and to stop at (during rollback). This saved pointers need to be forgotten in case of ventries list or vchunk list changes, which is done by couple of "changed" helpers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Allow to interrupt/continue rehash workJiri Pirko
Currently, migration of vregions with many entries may take long time during which insertions and removals of the rules are blocked due to wait to acquire vregion->lock. To overcome this, allow to interrupt and continue rehash work according to the set credits - number of rules to migrate. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Do rollback as another call to ↵Jiri Pirko
mlxsw_sp_acl_tcam_vchunk_migrate_all() In order to simplify the code and to prepare it for interrupted/continued migration process, do the rollback in case of migration error as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all(). It can be understood as "migrate all back". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Put vchunk migrate start/end code into separate functionsJiri Pirko
In preparations of interrupt/continue of rehash work, put the code that is done at the beginning/end of vchunk migrate function into separate functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Put this_is_rollback to rehash context structJiri Pirko
Put the this_is_rollback flag into rehash context struct in preparations for interrupt/continue of rehash work. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Rename variables in mlxsw_sp_acl_tcam_ventry_migrate()Jiri Pirko
Remove some of variables in function mlxsw_sp_acl_tcam_ventry_migrate() so the names are aligned with the rest of the code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: assign vchunk->chunk by the newly created chunkJiri Pirko
Make the vchunk->chunk contain pointer of a new chunk we migrate to. In case of a rollback, it contains the original chunk. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: assign vregion->region by the newly created regionJiri Pirko
Make the vregion->region contain pointer of a new region we migrate to. In case of a rollback, it contains the original region. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Push code start/end from ↵Jiri Pirko
mlxsw_sp_acl_tcam_vregion_migrate() Push code from the beginning and end of function mlxsw_sp_acl_tcam_vregion_migrate() into rehash_start()/end() functions. Then all the things needed to be done before and after the actual migration process will be grouped together. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Push rehash start/end code into separate functionsJiri Pirko
In preparations for interrupt/continue of rehash work, put the code at the beginning/end of the rehash function into separate functions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Introduce new rehash context struct and save hint_priv ↵Jiri Pirko
there Prepare for continued migration. Introduce a new structure to track rehash context and save hint_priv into it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Don't migrate already migrated entryJiri Pirko
Check if the entry is already in a chunk where we want it to be. In that case, skip migration. This is preparation for "per parts" migration where this situation may occur. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01mlxsw: spectrum_acl: Push rehash dw struct into rehash sub-structJiri Pirko
More rehash related fields are going to come. Push "dw" into sub-struct that will accommodate the others as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Add vregion migration end tracepointJiri Pirko
Hit the new tracepoint once the vregion migration ends. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()Jiri Pirko
Other mutexes are taking care of proper locking for this, no longer needed to take RTNL mutex here. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Don't take rtnl lock during vregion_rehash_intrvl_set()Jiri Pirko
Relax dependency on rtnl mutex during vregion_rehash_intrvl_set(). The vregion list is protected with newly introduced mutex. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Enable vregion rehash per-profileJiri Pirko
For MR ACL profile is does not make sense to do periodical rehashes, as there is only one mask in use during the whole vregion lifetime. Therefore periodical work is scheduled but the rehash never happens. So allow to enable/disable rehash for the whole group, which is added per-profile. Disable rehashing for MR profile. Addition to the vregion list is done only in case the rehash is enable on the particular vregion. Also, the addition is moved after delayed work init to avoid schedule of uninitialized work from vregion_rehash_intrvl_set(). Symmetrically, deletion from the list is done before canceling the delayed work so it is not scheduled by vregion_rehash_intrvl_set() again. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Introduce vregion mutexJiri Pirko
In order to remove dependency on RTNL, introduce a mutex to guard vregion structure, list of chunks and list of entries in chunks. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Refactor vregion association codeJiri Pirko
Refactor existing _vchunk_assoc/_vchunk_deassoc() functions into _vregion_get()/_vregion_put() to make the code simpler and prepared for vregion locking. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Introduce a mutex to guard region list updatesJiri Pirko
In order to remove RTNL lock dependency, it is needed to protect the regions list in a group. Introduce a mutex to do the job. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Split TCAM group structure into twoJiri Pirko
Make the existing group structure to contain fields needed for HW region list manipulations. Move the rest of the fields into new vgroup struct. This makes layering cleaner as the vgroup struct is on higher level than low-level group struct. Also, this makes it possible to introduce fine-grained locking. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24mlxsw: spectrum_acl: Remove unused ops field from group structureJiri Pirko
Never used, remove it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Add couple of vregion rehash tracepointsJiri Pirko
As vregion rehash is happening in delayed work, add some visibility to the process using a few tracepoints. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum: add "acl_region_rehash_interval" devlink paramJiri Pirko
Expose new driver-specific "acl_region_rehash_interval" devlink param which would allow user to alter default ACL region rehash interval. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Implement region migration according to hintsJiri Pirko
If the hints are returned, the migration should be started. For that to happen, there is a need to create a second physical region in TCAM with new ERP set by passing the hints and then move chunk by chunk, entry by entry. During the transition, two lookups will occur. One in old region and another in new region. The highest priority rule will be chosen. In an unlikely case that the migration will fail and also rollback to original region will fail the vregion will become in bad state. Everything will work, only no future rehash will be possible. In a follow-up work, this can be resolved by trying to resume the rollback in delayed work and repair the vregion. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: reg: Add multi field to PAGT registerJiri Pirko
For Spectrum-2 this allows parallel lookups in multiple regions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Pass hints priv all the way to ERP codeJiri Pirko
The hints priv comes from ERP code and it is possible to obtain it from TCAM code. Add arg to appropriate functions so the hints priv could be passed back down to ERP code. Pass NULL now as the follow-up patches would pass an actual hints priv pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Split entry struct into entry and ventryJiri Pirko
Do the split of entry struct so the new entry struct is related to the actual HW entry, whereas ventry struct is a SW abstration of that. This split prepares possibility for ventry to hold 2 HW entries which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Split chunk struct into chunk and vchunkJiri Pirko
Do the split of chunk struct so the new chunk struct is related to the actual HW chunk (differs between Spectrum and Spectrum-2), whereas vchunk struct is a SW abstraction of that. This split prepares possibility for vchunk to hold 2 HW chunks which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Split region struct into region and vregionJiri Pirko
Do the split of region struct so the new region struct is related to the actual HW region, whereas vregion struct is a SW abstration of that. This split prepares possibility for vregion to hold 2 HW regions which is needed for region ERP rehash flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28mlxsw: spectrum_acl: Move mr_ruleset and mr_rule structsJiri Pirko
Move the struct to the place where they belong, alongside with the rest of the MR code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28mlxsw: spectrum_acl: Remove unnecessary arg on action_replace call pathJiri Pirko
No need to pass ruleset/group and chunk pointers on action_replace call path, nobody uses them. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Limit priority valueNir Dotan
In Spectrum-2, higher priority value wins and priority valid values are in the range of {1,cap_kvd_size-1}. mlxsw_sp_acl_tcam_priority_get converts from lower-bound priorities alike tc flower to Spectrum-2 HW range. Up until now tc flower did not provide priority 0 or reached the maximal value, however multicast routing does provide priority 0. Therefore, Change mlxsw_sp_acl_tcam_priority_get to verify priority is in the correct range. Make sure priority is never set to zero and never exceeds the maximal allowed value. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Add replace rule action operationNir Dotan
Multicast routes actions may be updated after creation. An example for that is an addition of an egress interface to an existing route. So far, as tc flower API dictated, ACL rules were either created or deleted. Since multicast routes in Spectrum-2 are written to ACL as any rule, it is required to allow the update of a rule's action as it may change. Add methods and operations to support updating rule's action. This is supported only for Spectrum-2. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Add multicast router profile operationsNir Dotan
Add specific ACL operations needed for programming multicast routing ACL groups and routes. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25mlxsw: spectrum_acl: Make global TCAM resources available to regionsIdo Schimmel
Each TCAM region currently uses its own resources and there is no sharing between the different regions. This is going to change with A-TCAM as each region will need to allocate an eRP table from the global eRP tables array. Make the global TCAM resources available to each region by passing the TCAM private data to the region initialization routine. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23mlxsw: spectrum: Implement chain template hintingJiri Pirko
Since cld_flower provides information about the filter template for specific chain, use this information in order to prepare a region. Use the template to find out what elements are going to be used and pass that down to mlxsw_sp_acl_tcam_group_add(). Later on, when the first filter is inserted, the mlxsw_sp_acl_tcam_group_use_patterns() function would use this element usage information instead of looking up a pattern. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_acl: Add region association callbackIdo Schimmel
In Spectrum-2, ACL regions that use 8 or 12 key blocks require several consecutive hardware regions. In order to allow defragmentation, the device stores a mapping from a logical region ID to an hardware region ID, which is similar to the page table that is used to translate virtual addresses to physical addresses. Add the region association callback to the region create sequence and implement it as a NOP in Spectrum which does not require it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09mlxsw: spectrum_acl: Implement priority setting for rules inserted to TCAMJiri Pirko
For Spectrum-2, we need to insert priority to C-TCAM because HW needs that info in order to correctly process scenarios where rules are in both C-TCAM and A-TCAM. So extend the mlxsw_sp_acl_ctcam_entry_add() args to accept indication if priority needs to be filled up and implement the priority computation and fill-up. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09mlxsw: spectrum_acl: Add tcam init/fini opsJiri Pirko
Add ops to be called on driver instance init and fini. This is needed in order to be possible to do Spectrum-2 specific init and fini work. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09mlxsw: spectrum_acl: Split TCAM handling 3 waysJiri Pirko
To allow easy and clean Spectrum-2 implementation for things that differ from Spectrum, split the existing ACL TCAM code 3 ways: 1) common code that calls Spectrum/Spectrum-2 specific ops 2) Spectrum ops implementations 3) common C-TCAM code that is going to be shared between Spectrum and Spectrum-2 implementations Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08mlxsw: core_acl_flex_keys: Split MAC and IP address flex key elementsJiri Pirko
Since in Spectrum-2, MACs are split and IP addresses are split as well, in order to use the same elements for Spectrum and Spectrum-2 split them now. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-08mlxsw: reg: Introduce Flex2 key type for PTAR registerJiri Pirko
Introduce Flex2 key type for PTAR register which is used in Spectrum-2. Also, extend mlxsw_reg_ptar_pack() to set the value according to the caller. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20mlxsw: spectrum_acl: Do not invalidate already invalid ACL groupsIdo Schimmel
When a new ACL group is created its region (ACL) list is initially empty. Thus, the call to mlxsw_sp_acl_tcam_group_update() would basically invalidate an already invalid (non-existent) group. Remove the unnecessary call and make the function symmetric to its del() counterpart. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-09 10:34:16 +0000