| Age | Commit message (Collapse) | Author |
|---|
|
Currently eswitch mode_lock is so heavy, for example, it's locked
during the whole process of the mode change, which may need to hold
other locks. As the mode_lock is also used by IPSec to block mode and
encap change now, it is easy to cause lock dependency.
Since some of protections are also done by devlink lock, the eswitch
mode_lock is not needed at those places, and thus the possibility of
lockdep issue is reduced.
Fixes: c8e350e62fc5 ("net/mlx5e: Make TC and IPsec offloads mutually exclusive on a netdev")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.
That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.
Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
After IPsec decryption it isn't enough to only check the IPsec syndrome
but need to also check the ASO syndrome in order to verify that the
operation was actually successful.
Verify that both syndromes are actually zero and in case not drop the
packet and increment the appropriate flow counter for the drop reason.
Fixes: 6b5c45e16e43 ("net/mlx5e: Configure IPsec packet offload flow steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
After previous commit, which unified various IPsec creation modes,
there is no need to have struct mlx5e_ipsec_rx exposed in global
IPsec header. Move it to ipsec_fs.c to be placed together with
already existing struct mlx5e_ipsec_tx.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Change normal IPsec flow to use the same creation/destruction functions
for status flow table as that of ESW, which first of all refines the
code to have less code duplication.
And more importantly, the ESW status table handles IPsec syndrome
checks at steering by HW, which is more efficient than the previous
behaviour we had where it was copied to WQE meta data and checked
by the driver.
Fixes: 1762f132d542 ("net/mlx5e: Support IPsec packet offload for RX in switchdev mode")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
However if user didn't set seq/oseq, the HW used zero as first sequence
packet number. Such misconfiguration causes to drop of first packet
if replay window protection was enabled in SA.
To fix it, set sequence number to be at least 1.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.
Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3ab ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mark all Spectrum>2 systems as preferring CFF flood mode if supported by
the firmware.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/8a3d2ad96b943f7e3f53f998bd333a14e19cd641.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In this patch, add the artifacts for the rFID family that works in CFF
flood mode.
The same that was said about PGT organization and lookup in bridge FID
families applies for the rFID family as well. The main difference lies in
the fact that in the controlled flood mode, the FW was taking care of
maintaining the PGT tables for rFIDs. In CFF mode, the responsibility
shifts to the driver.
All rFIDs are based off either a front panel port, or a LAG port. For those
based off ports, we need to maintain at worst one PGT block for each port,
for those based off LAGs, one PGT block per LAG. This reflects in the
pgt_size callback, which determines the PGT footprint based on number of
ports and the LAG capacity.
A number of FIDs may end up using the same PGT base. Unlike with bridges,
where membership of a port in a given FID is highly dynamic, an rFID based
of a port will just always need to flood to that port.
Both the port and the LAG subtables need to be actively maintained. To that
end, the CFF rFID family implements fid_port_init and fid_port_fini
callbacks, which toggle the necessary bits.
Both FID-MID translation and SFMR packing then point into either the port
or the LAG subtable, to the block that corresponds to a given port or a
given LAG, depending on what port the RIF bound to the rFID uses.
As in the previous patch, the way CFF flood mode organizes PGT accesses
allows for much more smarts and dynamism. As in the previous patch, we
rather aim to keep things simple and static.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/962deb4367585d38250e80c685a34735c0c7f3ad.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In this patch, add the artifacts for 802.1d and 802.1q FID families that
work in CFF flood mode.
In CFF flood mode, the way flood vectors are looked up changes: there's a
per-FID PGT base, to which a small offset is added depending on type of
traffic. Thus each FID occupies a small contiguous block of PGT memory,
whereas in the controlled flood mode, flood vectors for a given FID were
spread across the PGT.
The term "flood table" as used by the spectrum_fid module, borrows from
controlled flood mode way of organizing the PGT table. There flood tables
were actual tables, contiguous in the PGT. In the CFF flood mode, they are
more abstract: a flood table becomes a collection of e.g. all first rows of
the per-FID PGT blocks. Nonetheless we retain the nomenclature.
FIDs are still configured through the SFMR register, but there are
different fields to set under CFF mode: PGT base and profile. Thus register
packing gets a dedicated op overload as well.
The new organization of PGT makes it possible to treat the PGT as a block
of an ordinary memory, allocate and deallocate on demand, and achieve
better flexibility. Here instead, we aim to keep the code as close as
possible to the previous controlled flood mode, support for which we need
to retain for Spectrum-1 and older FW versions anyway. Thus the PGT
footprint of the individual families is the same as before, just the
internal organization of the per-family PGT region differs. Hence the
pgt_size callback is reused between the controlled and CFF flood modes.
Since the dummy family has no flood tables in either the CTL mode or in
CFF mode, the existing one can be reused for the CFF family array.
Users should not notice any changes between the controlled and CFF flood
modes.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ca40b8163e6d6a21f63ef299619acee953cf9519.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CFF flood mode, the way flood vectors are looked up changes: there's a
per-FID PGT base, to which a small offset is added depending on type of
traffic. Thus each FID occupies a small contiguous block of PGT memory,
whereas in the controlled flood mode, flood vectors for a given FID were
spread across the PGT.
Each FID is associated with one of a handful of profiles. The profile and
the traffic type are then used as keys to look up the PGT offset. This
offset is then added to the per-FID PGT base. The profile / type / offset
mapping needs to be configured by the driver, and is only relevant in CFF
flood mode.
In this patch, add the SFFP initialization code. Only initialize the one
profile currently explicitly used. As follow-up patch add more profiles,
this code will pick them up and initialize as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2c4733ed72d439444218969c032acad22cd4ed88.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the CFF mode, flood profiles are identified by a unique numerical
identifier. This is used for configuration of FIDs and for configuration of
traffic-type to PGT offset rules. In both cases, the numerical identifier
serves as a handle for the flood profile. Add the identifier to the flood
profile structure.
There is currently only one flood profile in use explicitly, the one used
for all bridging. Eventually three will be necessary in total: one for
bridges, one for rFIDs, one for NVE underlay. A total of four profiles
are supported by the HW. Start allocating at 1, because 0 is currently
used for underlay NVE flood.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/19ea9c35ba8b522fa5f7eb6fd7bc1b68f0f66b41.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A flood profile is a mapping from traffic type to an offset at which a
flood vector should be looked up. In mlxsw so far, a flood profile was
somewhat implicitly represented by flood table array. When the CFF flood
mode will be introduced, the flood profile will become more explicit: each
will get a number and the profile ID / traffic-type / offset mapping will
actually need to be initialized in the hardware.
Therefore it is going to be handy to have a structure that keeps all the
components that compose a flood profile. Add this structure, currently with
just the flood table array bits. In the FID families that flood at all,
reference the flood profile instead of just the table array.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/15e113de114d3f41ce3fd2a14a2fa6a1b1d7e8f2.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the CFF flood mode, the driver has to allocate a table within PGT, which
holds flood vectors for router subport FIDs. For LAGs, these flood vectors
have to obviously be maintained dynamically as port membership in a LAG
changes. But even for physical ports, the flood vectors have to be kept
valid, and may not contain enabled bits corresponding to non-existent
ports. It is therefore not possible to precompute the port part of the RSP
table, it has to be maintained as ports come and go due to splits.
To support the RSP table maintenance, add to FID ops two new ops:
fid_port_init and fid_port_fini, for when a port comes to existence, or
joins a lag, and vice versa. Invoke these ops from
mlxsw_sp_port_fids_init() and mlxsw_sp_port_fids_fini(), which are called
when port is added and removed, respectively. Also add two new hooks for
LAG maintenance, mlxsw_sp_fid_port_join_lag() / _leave_lag() which
transitively call into the same ops.
Later patches will actually add the op implementations themselves, this
just adds the scaffolding.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/234398a23540317abb25f74f920a5c8121faecf0.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CFF flood mode, the rFID family will allocate two tables. One for
unknown UC traffic, one for everything else. Add a traffic type for the
everything else traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/8fb968b2d1cc37137cd0110c98cdeb625b03ca99.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The way SFMR is packed differs between the controlled and CFF flood modes.
Add an op to dispatch it dynamically.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f12fe7879a7086ee86343ee4db02c859f78f0534.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the CFF flood mode, the way to determine a PGT address where a given FID
/ flood table resides is different from the controlled flood mode, which
mlxsw currently uses. Furthermore, this will differ between rFID family and
bridge families. The operation therefore needs to be dynamically
dispatched. To that end, add an op to FID-family ops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://lore.kernel.org/r/00e8f6ad79009a9a77a5c95d596ea9574776dc95.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the CFF flood mode, the PGT allocation size of RFID family will not
depend on number of FIDs, but rather number of ports and LAGs. Therefore
introduce a FID family operation to calculate the PGT allocation size.
The way that size is calculated in the CFF mode depends on calling fallible
functions. Thus express the op as returning an int, with the size returned
via a pointer argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/1174651b7160fcedbef50010ae4b68201112fe6f.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In controlled flood mode, for each bridge FID family (i.e., 802.1Q and
802.1D) and packet type (i.e., UUC/MC/BC), the hardware needs to be told
which PGT address to use as the base address for the flood table and how
to determine the offset from the base for each FID.
The above is not needed in CFF mode where each FID has its own flood
table instead of the FID family itself.
Therefore, create a new FID family operation for the above configuration
and only implement it for the 802.1Q and 802.1D families in controlled
flood mode.
No functional changes intended.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/06f71415eec75811585ec597e1dd101b6dff77e7.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the function to the point where it will need to be to be visible for
the 802.1d ops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/aef09e26b0c2dd077531e665d7135b300bdaf0a8.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This operation will be fallible for rFIDs in CFF mode, which will be
introduced in follow-up patches. Have it return an int, and handle
the failures in the caller.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/75f1b85c0cb86bea5501fcc8657042f221a78b32.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In future patches, for CFF flood mode support, we will need a way to
determine a PGT base dynamically, as an op. Therefore, for symmetry,
split out a helper, mlxsw_sp_fid_pgt_base_ctl(), that determines a PGT base
in the controlled mode as well.
Now that the helper is available, use it in mlxsw_sp_fid_flood_table_init()
which currently invokes the FID->MID helper to that end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/fd41c66a1df4df6499d3da34f40e7b9efa15bc3e.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, mlxsw always uses a "controlled" flood mode on all Nvidia
Spectrum generations. The following patches will however introduce a
possibility to run a "CFF" (for Compressed FID Flooding) mode on newer
machines, if the FW supports it.
To reflect that, label all FID ops, FID families and FID family arrays with
a _ctl suffix. This will make it clearer what is what when the CFF families
are introduced in later patches.
Keep the dummy family intact. Since the dummy family has no flood tables
in either CTL or CFF mode, there are no flood-mode-specific callbacks.
Additionally, add a remark at two fields that they are only relevant when
flood mode is not CFF.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/96b6da5439bb662fa86e795bbcec9dc3ccfa59fd.1701183892.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, mlxsw always uses a "controlled" flood mode on all Nvidia
Spectrum generations. The following patches will however introduce a
possibility to run a "CFF" (for Compressed FID Flooding) mode on newer
machines, if the FW supports it.
Several operations will differ between how they need to be done in
controlled mode vs. CFF mode. Thus the per-FID-family ops will differ
between controlled and CFF, thus the FID family array as such will
differ depending on whether the mode negotiated with FW is controlled
or CFF.
The simple approach of having several globally visible arrays for
spectrum.c to statically choose from no longer works. Instead privatize all
FID initialization and finalization logic, and expose it as ops instead.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/d3fa390d97cf3dbd2f7a28741be69b311e2059e4.1701183891.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TX timestamp:
- requires passing clock, not sure I'm passing the correct one (from
cq->mdev), but the timestamp value looks convincing
TX checksum:
- looks like device does packet parsing (and doesn't accept custom
start/offset), so I'm ignoring user offsets
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-5-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Link page pool instances to netdev for the drivers which
already link to NAPI. Unless the driver is doing something
very weird per-NAPI should imply per-netdev.
Add netsec as well, Ilias indicates that it fits the mold.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I accidentally removed the error checking after issuing the reset.
Restore it.
Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For subport RIFs, the setup initializes, among other things, RIF port and
LAG numbers. Those are important to determine where in the PGT the RIF FID
will be stored. Therefore, call the RIF setup before fid_get.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f24d8cad7e4748b8e8e0e16894ca6a20704dea32.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the CFF flood mode, responsibility for management of the PGT entries for
rFIDs is moved from FW to the driver. All rFIDs are based off either a
front panel port, or a LAG port. The flood vectors for port-based rFIDs
enable just the port itself, the ones for LAG-based rFIDs enable all member
ports of the LAG in question.
Since all rFIDs based off the same port have the same flood vector, and
similarly for LAG-based rFIDs, the flood entries are shared. The PGT
address of the flood vector is therefore determined based on the port (or
LAG) number of the RIF connected with the rFID.
Add a helper to determine subport number given a RIF, to be used in these
calculations.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/d7ab43cf5b021f785f363f236e4b6780d10eea93.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both mlxsw_sp_fid_op() and mlxsw_sp_fid_edit_op() pack the core of SFMR the
same way. Extract the common code into a helper and call that. Extract out
of that a wrapper that just calls mlxsw_reg_sfmr_pack(), because it will
be useful for the dummy family later on.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/31f32b4d767183f6cb197148d0792feab2efadba.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The caller already only calls mlxsw_sp_fid_flood_tables_init() and
mlxsw_sp_fid_flood_tables_fini() if (fid_family->flood_tables). There
is no configuration where the pointer is non-NULL, but the number of
tables is zero. So drop the conditions.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/897c6841bc756ac632b797bf67ac83c6a66ba359.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are FW versions out there that do not support CFF flood mode, and on
Spectrum-1 in particular, there is no plan to support it at all. mlxsw will
therefore have to support both controlled flood mode as well as CFF. There
are also FW versions out there that claim to support CFF flood mode, but
then reject or ignore configurations enabling the same. The driver thus has
to have a say in whether an attempt to configure CFF flood mode should even
be made, and what to use as a fallback.
Hence express the feature in terms of "does the driver prefer CFF flood
mode?", and "what flood mode the PCI module managed to configure the FW
with". This gives to the driver a chance to determine whether CFF flood
mode configuration should be attempted.
The latter bit was added in previous patches. In this patch, add the bit
that allows the driver to determine whether CFF enablement should be
attempted, and the enablement code itself.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/41640a0ee58e0a9538f820f7b601a0e35f6449e4.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
CFF mode, for Compressed FID Flooding, is a way of organizing flood vectors
in the PGT table. The bus module determines whether CFF is supported, can
configure flood mode to CFF if it is, and knows what flood mode has been
configured. Therefore add a bus callback to determine the configured flood
mode. Also add to core an API to query it.
Since after this patch, we rely on mlxsw_pci->flood_mode being set, it
becomes a coding error if a driver invokes this function with a set of
fields that misses the initialization. Warn and bail out in that case.
The CFF mode is not used as of this patch. The code to actually use it will
be added later.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/889d58759dd40f5037f2206b9fc4a78a9240da80.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the field cff_mid_base, which specifies at which point in PGT the
per-FID flood table is stored. Add cff_prf_id, the profile ID, which
determines on which row of the flood table a flood vector can be found for
a given traffic type.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/3ad7ae38cf6534bedcd876f16090d109a814b3e3.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In CFF mode, it is necessary to set a different set of SFMR fields. Leave
in mlxsw_reg_sfmr_pack() only the common bits, and move the parts relevant
to controlled flood mode directly to the call site.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/6f29639ebc3ca0722272e6c644ca910096469413.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MLXSW_REG_ZERO at the beginning of the function wipes the whole
payload. There's no need to set vtfp and vv to false explicitly.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/04a51ea7cf31eea0ef7707311d8e864e2d9ef307.1700503644.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some existing fields and the whole register of SFGC are reserved in CFF
mode. Backport the reservation note to these fields.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/e1d5977a8cb778227e4ea2fd1515529957ce5de7.1700503643.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SFFP register populates the fid flooding profile tables used for the
NVE flooding and Compressed-FID Flooding (CFF).
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ca42eb67763bd0c7cf035afc62ef73632f3f61a6.1700503643.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
max_cap_nve_flood_prf describes maximum number of NVE flooding profiles.
The same value then applies for flooding profiles for flooding in CFF mode.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/064a2e013d879e5f5494167a6c120c4bb85a2204.1700503643.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PGT, a port-group table is an in-HW block of specialized memory that holds
sets of ports. Allocated within the PGT are series of flood tables that
describe to which ports traffic of various types (unknown UC, BC, MC)
should be flooded from which FID. The hitherto-used layout of these flood
tables is being replaced with a more flexible scheme, called compressed FID
flooding (CFF). CFF can be configured through CONFIG_PROFILE.flood_mode.
In this patch, add MLXSW_CMD_MBOX_CONFIG_PROFILE_FLOOD_MODE_CFF, the value
to use to enable the CFF mode.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/fc2e063742856492f8f22b0b87abf431ea6d53d0.1700503643.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PGT, a port-group table is an in-HW block of specialized memory that holds
sets of ports. Allocated within the PGT are series of flood tables that
describe to which ports traffic of various types (unknown UC, BC, MC)
should be flooded from which FID. The hitherto-used layout of these flood
tables is being replaced with a more flexible scheme, called compressed FID
flooding (CFF). CFF can be configured through CONFIG_PROFILE.flood_mode.
cff_support determines whether CONFIG_PROFILE.flood_mode can be set to CFF.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/af727d0e1095e30fa45c7e60404637cdc491aeec.1700503643.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-11-13
1) Cleanup patches, leftovers from previous cycle
2) Allow sync reset flow when BF MGT interface device is present
3) Trivial ptp refactorings and improvements
4) Add local loopback counter to vport rep stats
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement reset_prepare() and reset_done() handlers that are invoked by
the PCI core before and after issuing a PCI reset, respectively.
Specifically, implement reset_prepare() by calling
mlxsw_core_bus_device_unregister() and reset_done() by calling
mlxsw_core_bus_device_register(). This is the same implementation as the
reload_{down,up}() devlink operations with the following differences:
1. The devlink instance is unregistered and then registered again after
the reset.
2. A reset via the device's command interface (using MRSR register) is
not issued during reset_done() as PCI core already issued a PCI
reset.
Tested:
# for i in $(seq 1 10); do echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset; done
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver resets the device during probe and during a devlink reload.
The current reset method reloads the current firmware version or a
pending one, if one was previously flashed using devlink. However, the
current reset method does not result in a PCI hot reset, preventing the
PCI firmware from being upgraded, unless the system is rebooted.
To solve this problem, a new reset command (6) was implemented in the
firmware. Unlike the current command (1), after issuing the new command
the device will not start the reset immediately, but only after a PCI
hot reset.
Implement the new reset method by first verifying that it is supported
by the current firmware version by querying the Management Capabilities
Mask (MCAM) register. If supported, issue the new reset command (6) via
MRSR register followed by a PCI reset by calling
__pci_reset_function_locked().
Once the PCI firmware is operational, go back to the regular reset flow
and wait for the entire device to become ready. That is, repeatedly read
the "system_status" register from the BAR until a value of "FW_READY"
(0x5E) appears.
Tested:
# for i in $(seq 1 10); do devlink dev reload pci/0000:01:00.0; done
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In general, the existing flow of software reset in the driver is:
1. Wait for system ready status.
2. Send MRSR command, to start the reset.
3. Wait for system ready status.
This flow will be extended once a new reset command is supported. As a
preparation, move step #2 to a separate function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the next patches, mlxsw_pci_sw_reset() will be extended to support
more reset types and will not necessarily issue a software reset. Rename
the function to reflect that.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently mlxsw_reg_mrsr_pack() always sets 'command=1'. As preparation for
support of new reset flow, pass the command as an argument to the
function and add an enum for this field.
For now, always pass 'command=1' to the pack() function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
representors
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
