summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip/lan743x_main.c
AgeCommit message (Collapse)Author
2025-01-16net: lan743x: convert to phylink managed EEERussell King (Oracle)
Convert lan743x to phylink managed EEE: - Set the lpi_capabilties. - Move the call to lan743x_mac_eee_enable() into the enable/disable tx_lpi functions. - Ensure that EEEEN is clear during probe. - Move the setting of the LPI timer into mac_enable_tx_lpi(). - Move reading of LPI timer to phylink initialisation to set the default timer value. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAEB-0014QB-4s@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: lan743x: use netdev in lan743x_phylink_mac_link_down()Russell King (Oracle)
Use the netdev that we already have in lan743x_phylink_mac_link_down(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYAE5-0014Q5-Up@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: lan743x: Add support to ethtool phylink get and set settingsRaju Lakkaraju
Add support to ethtool phylink functions: - get/set settings like speed, duplex etc - get/set the wake-on-lan (WOL) - get/set the energy-efficient ethernet (EEE) - get/set the pause Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Migrate phylib to phylinkRaju Lakkaraju
Migrate phy support from phylib to phylink. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate Link Speed Duplex state functionRaju Lakkaraju
Create separate Link Speed Duplex (LSD) update state function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate PCS power reset functionRaju Lakkaraju
Create separate PCS power reset function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-18net: lan743x: Support WOL at both the PHY and MAC appropriatelyRaju Lakkaraju
Prevent options not supported by the PHY from being requested to it by the MAC Whenever a WOL option is supported by both, the PHY is given priority since that usually leads to better power savings. Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: lan743x: disable WOL upon resume to restore full data path operationRaju Lakkaraju
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering a system event can wake the system from sleep, which may block the data path. To restore normal data path functionality after waking, disable all wake-up events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing 1's to them. Fixes: 4d94282afd95 ("lan743x: Add power management support") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: lan743x: Correct spelling in commentsSimon Horman
Correct spelling in comments, as flagged by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-1-f0480542e39f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08net: lan743x: Fixup EEEAndrew Lunn
The enabling/disabling of EEE in the MAC should happen as a result of auto negotiation. So move the enable/disable into lan743x_phy_link_status_change() which gets called by phylib when there is a change in link status. lan743x_ethtool_set_eee() now just programs the hardware with the LTI timer value, and passed everything else to phylib, so it can correctly setup the PHY. lan743x_ethtool_get_eee() relies on phylib doing most of the work, the MAC driver just adds the LTI timer value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-28net: lan743x: Add set RFE read fifo threshold for PCI1x1x chipsRaju Lakkaraju
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO threshold parameter from its hardware default of 4 to 3 dwords to prevent the problem. Rev C0 and later hardware already defaults to 3 dwords. Fixes: bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240326065805.686128-1-Raju.Lakkaraju@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22net: microchip: lan743x: Fix spelling mistake "erro" -> "error"Colin Ian King
There is a spelling mistake in a netif_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220091737.2676984-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24net: microchip: lan743x: improve throughput with rx timestamp configVishvambar Panth S
Currently all RX frames are timestamped which results in a performance penalty when timestamping is not needed. The default is now being changed to not timestamp any Rx frames (HWTSTAMP_FILTER_NONE), but support has been added to allow changing the desired RX timestamping mode (HWTSTAMP_FILTER_ALL - which was the previous setting and HWTSTAMP_FILTER_PTP_V2_EVENT are now supported) using SIOCSHWTSTAMP. All settings were tested using the hwstamp_ctl application. It is also noted that ptp4l, when started, preconfigures the device to timestamp using HWTSTAMP_FILTER_PTP_V2_EVENT, so this driver continues to work properly "out of the box". Test setup: x64 PC with LAN7430 ---> x64 PC as partner iperf3 with - Timestamp all incoming packets: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-5.05 sec 517 MBytes 859 Mbits/sec 0 sender [ 5] 0.00-5.00 sec 515 MBytes 864 Mbits/sec receiver iperf Done. iperf3 with - Timestamp only PTP packets: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-5.04 sec 563 MBytes 937 Mbits/sec 0 sender [ 5] 0.00-5.00 sec 561 MBytes 941 Mbits/sec receiver Signed-off-by: Vishvambar Panth S <vishvambarpanth.s@microchip.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231020185801.25649-1-vishvambarpanth.s@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-17net: microchip: lan743x: add fixed phy unregister supportPavithra Sathyanarayanan
When operating in fixed phy mode and if there is repeated open/close phy test cases, everytime the fixed phy is registered as a new phy which leads to overrun after 32 iterations. It is solved by adding fixed_phy_unregister() in the phy_close path. In phy_close path, netdev->phydev cannot be used directly in fixed_phy_unregister() due to two reasons, - netdev->phydev is set to NULL in phy_disconnect() - fixed_phy_unregister() can be called only after phy_disconnect() So saving the netdev->phydev in local variable 'phydev' and passing it to phy_disconnect(). Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: lan743x: Return PTR_ERR() for fixed_phy_register()Ruan Jinjie
fixed_phy_register() returns -EPROBE_DEFER, -EINVAL and -EBUSY, etc, in addition to -EIO. The Best practice is to return these error codes with PTR_ERR(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-29net: lan743x: Don't sleep in atomic contextMoritz Fischer
dev_set_rx_mode() grabs a spin_lock, and the lan743x implementation proceeds subsequently to go to sleep using readx_poll_timeout(). Introduce a helper wrapping the readx_poll_timeout_atomic() function and use it to replace the calls to readx_polL_timeout(). Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Cc: stable@vger.kernel.org Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Signed-off-by: Moritz Fischer <moritzf@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230627035000.1295254-1-moritzf@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-27net: lan743x: Simplify comparisonMoritz Fischer
Simplify comparison, no functional changes. Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Moritz Fischer <moritzf@google.com> Link: https://lore.kernel.org/r/20230627035432.1296760-1-moritzf@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-02net: lan743x: Remove extranous gotosMoritz Fischer
The gotos for cleanup aren't required, the function might as well just return the actual error code. Signed-off-by: Moritz Fischer <moritzf@google.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-22ethernet: remove superfluous clearing of phydevWolfram Sang
phy_disconnect() calls phy_detach() which already clears 'phydev' if it is attached to a struct net_device. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230321131745.27688-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19net: phy: Remove probe_capabilitiesAndrew Lunn
Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-19net: lan743x: add fixed phy support for LAN7431 devicePavithra Sathyanarayanan
Add fixed_phy support at 1Gbps full duplex for the lan7431 device if a phy not found over MDIO. Tested with a MAC to MAC connection from LAN7431 to a KSZ9893 switch. This avoids the Driver open error in LAN743x. TX delay and internal CLK125 generation is already enabled in EEPROM. Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-19net: lan743x: add generic implementation for phy interface selectionPavithra Sathyanarayanan
Add logic to read the Phy interface from MAC_CR register for LAN743x driver. Checks for the LAN7430/31 or pci11x1x devices and the adapter interface is updated accordingly. For LAN7431, adapter interface is set based on Bit 19 of MAC_CR register as MII or RGMII which removes the forced RGMII/GMII configurations in lan743x_phy_open(). Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-19net: lan743x: remove unwanted interface select settingsPavithra Sathyanarayanan
Remove the MII/RGMII Selection settings in driver as it is preset by the EEPROM and has the required configurations before the driver loads for LAN743x. Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-13net: lan743x: Separate C22 and C45 transactionsAndrew Lunn
The microchip lan743x MDIO bus driver can perform both C22 and C45 transfers in some variants. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-09net: lan743x: Add support to SGMII register dump for PCI11010/PCI11414 chipsRaju Lakkaraju
Add support to SGMII register dump Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25net: lan743x: Add support for get_pauseparam and set_pauseparamRaju Lakkaraju
Add pause get and set functions Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-09net: lan743x: Add support for Rx IP & TCP checksum offloadRaju Lakkaraju
Add Rx IP and TCP checksum offload Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-09net: lan743x: Fix to use multiqueue start/stop APIsRaju Lakkaraju
- Fix to use multiqueue start/stop APIs - Change to return NETDEV_TX_BUSY instead of holding the TX skb when busy - Increase Tx ring size to 128 to address performance issues in some platforms - Use NAPI_POLL_WEIGHT for Tx Napi handler instead of ring dependent value - Use multiqueue to register 4 Rx channels Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: lan743x: Use correct variable in lan743x_sgmii_config()Dan Carpenter
There is a copy and paste bug in lan743x_sgmii_config() so it checks if (ret < 0) instead of if (mii_ctl < 0). Fixes: 46b777ad9a8c ("net: lan743x: Add support to SGMII 1G and 2.5G") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/YrRry7K66BzKezl8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: lan743x: Add support to SGMII 1G and 2.5GRaju Lakkaraju
Add SGMII access read and write functions Add support to SGMII 1G and 2.5G for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: lan743x: Add support to Secure-ON WOLRaju Lakkaraju
Add support to Magic Packet Detection with Secure-ON for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-27net: lan743x: PCI11010 / PCI11414 fixRaju Lakkaraju
Fix the MDIO interface declarations to reflect what is currently supported by the PCI11010 / PCI11414 devices (C22 for RGMII and C22_C45 for SGMII) Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05net: move snowflake callers to netif_napi_add_tx_weight()Jakub Kicinski
Make the drivers with custom tx napi weight call netif_napi_add_tx_weight(). Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20220504163725.550782-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: lan743x: Add support for EEPROMRaju Lakkaraju
Add new the EEPROM read and write access functions and system lock protection to access by devices for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support to display Tx Queue statisticsRaju Lakkaraju
Tx 4 queue statistics display through ethtool application Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for Clause-45 MDIO PHY managementRaju Lakkaraju
Add support for Clause-45 MDIO PHY management Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for SGMII interfaceRaju Lakkaraju
This change facilitates the selection between SGMII and (R)GIII interfaces Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Increase MSI(x) vectors to 16 and Int de-assertion timers to 10Raju Lakkaraju
Increase MSI / MSI-X vectors supported from 8 to 16 and Interrupt De-assertion timers from 8 to 10 Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for 4 Tx queuesRaju Lakkaraju
Add support for 4 Tx queues Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add PCI11010 / PCI11414 device IDsRaju Lakkaraju
PCI11010/PCI11414 devices are enhancement of Ethernet LAN743x chip family. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09lan743x: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ef548716606f257939df9738a801f15b6edf2568.1641743405.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24lan743x: fix deadlock in lan743x_phy_link_status_change()Heiner Kallweit
Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-06-14 10:45:16 +0000