summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip
AgeCommit message (Collapse)Author
2022-01-12net: sparx5: use phylink_generic_validate()Russell King (Oracle)
Sparx5 has no special behaviour in its validation implementation, so can be switched to phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: sparx5: clean up sparx5_phylink_validate()Russell King (Oracle)
sparx5_phylink_validate() no longer needs to check for PHY_INTERFACE_MODE_NA as phylink will walk the supported interface types to discover the link mode capabilities. Neither is it necessary to check the device capabilities as we will not be called for unsupported interface modes. Remove these checks. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2022-01-12net: sparx5: populate supported_interfaces memberRussell King (Oracle)
Populate the phy_interface_t bitmap for the Microchip Sparx5 driver with interfaces modes supported by the MAC. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-11-24lan743x: fix deadlock in lan743x_phy_link_status_change()Heiner Kallweit
Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29net: ethernet: microchip: lan743x: Increase rx ring size to improve rx ↵Yuiko Oshino
performance Increase the rx ring size (LAN743X_RX_RING_SIZE) to improve rx performance on some platforms. Tested on x86 PC with EVB-LAN7430. The iperf3.7 TCPIP improved from 881 Mbps to 922 Mbps, and UDP improved from 817 Mbps to 936 Mbps. Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-19ethernet: sparx5: use eth_hw_addr_gen()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18net: sparx5: Add of_node_put() before gotoWan Jiabing
Fix following coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-18ethernet: use eth_hw_addr_set() in unmaintained driversJakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14net: microchip: lan743x: add support for PTP pulse width (duty cycle)Yuiko Oshino
If the PTP_PEROUT_DUTY_CYCLE flag is set, then check if the request_on value in ptp_perout_request matches the pre-defined values or a toggle option. Return a failure if the value is not supported. Preserve the old behaviors if the PTP_PEROUT_DUTY_CYCLE flag is not set. Tested with an oscilloscope on EVB-LAN7430: e.g., to output PPS 1sec period 500mS on (high) to GPIO 2. ./testptp -L 2,2 ./testptp -p 1000000000 -w 500000000 Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Link: https://lore.kernel.org/r/1634046593-64312-1-git-send-email-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13net: encx24j600: check error in devm_regmap_init_encx24j600Nanyong Sun
devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: make more use of device_get_ethdev_address()Jakub Kicinski
Convert a few drivers to device_get_ethdev_address(), saving a few LoC. The check if addr is valid in netsec is superfluous, device_get_ethdev_addr() already checks that (in fwnode_get_mac_addr()). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: remove the addr len from mac helpersJakub Kicinski
All callers pass in ETH_ALEN and the function itself will return -EINVAL for any other address length. Just assume it's ETH_ALEN like all other mac address helpers (nvm, of, platform). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07eth: fwnode: change the return type of mac address helpersJakub Kicinski
fwnode_get_mac_address() and device_get_mac_address() return a pointer to the buffer that was passed to them on success or NULL on failure. None of the callers care about the actual value, only if it's NULL or not. These semantics differ from of_get_mac_address() which returns an int so to avoid confusion make the device helpers return an errno. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: sparx5: fix resource_size.cocci warningsYang Li
Use resource_size function on resource object instead of explicit computation. Clean up coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/sparx5_main.c:237:19-22: ERROR: Missing resource_size with iores [ idx ] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17net: microchip: encx24j600: drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for spi driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20net: sparx5: switchdev: adding frame DMA functionalitySteen Hegelund
This add frame DMA functionality to the Sparx5 platform. Ethernet frames can be extracted or injected autonomously to or from the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data structures in memory are used for injecting or extracting Ethernet frames. The FDMA generates interrupts when frame extraction or injection is done and when the linked lists need updating. The FDMA implements two extraction channels, one per switch core port towards the VCore CPU system and a total of six injection channels. Extraction channels are mapped one-to-one to the CPU ports, while injection channels can be individually assigned to any CPU port. - FDMA channel 0 through 5 corresponds to CPU port 0 injection direction FDMA_CH_CFG[channel].CH_INJ_PORT is set to 0. - FDMA channel 0 through 5 corresponds to CPU port 1 injection direction when FDMA_CH_CFG[channel].CH_INJ_PORT is set to 1. - FDMA channel 6 corresponds to CPU port 0 extraction direction. - FDMA channel 7 corresponds to CPU port 1 extraction direction. The FDMA implements a strict priority scheme among channels. Extraction channels are prioritized over injection channels and secondarily channels with higher channel number are prioritized over channels with lower number. On the other hand, ports are being served on an equal-bandwidth principle both on injection and extraction directions. The equal-bandwidth principle will not force an equal bandwidth. Instead, it ensures that the ports perform at their best considering the operating conditions. When more than one injection channel is enabled for injection on the same CPU port, priority determines which channel can inject data. Ownership is re-arbitrated on frame boundaries. The FDMA processes linked lists of DMA Control Block Structures (DCBs). The DCBs have the same basic structure for both injection and extraction. A DCB must be placed on a 64-bit word-aligned address in memory. Each DCB has a per-channel configurable amount of associated data blocks in memory, where the frame data is stored. The data blocks that are used by extraction channels must be placed on 64-bit word aligned addresses in memory, and their length must be a multiple of 128 bytes. A DCB carries the pointer to the next DCB of the linked list, the INFO word which holds information for the DCB, and a pair of status word and memory pointer for every data block that it is associated with. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10net: switchdev: zero-initialize struct switchdev_notifier_fdb_info emitted ↵Vladimir Oltean
by drivers towards the bridge The blamed commit added a new field to struct switchdev_notifier_fdb_info, but did not make sure that all call paths set it to something valid. For example, a switchdev driver may emit a SWITCHDEV_FDB_ADD_TO_BRIDGE notifier, and since the 'is_local' flag is not set, it contains junk from the stack, so the bridge might interpret those notifications as being for local FDB entries when that was not intended. To avoid that now and in the future, zero-initialize all switchdev_notifier_fdb_info structures created by drivers such that all newly added fields to not need to touch drivers again. Fixes: 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20210810115024.1629983-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04Revert "net: build all switchdev drivers as modules when the bridge is a module"Vladimir Oltean
This reverts commit b0e81817629a496854ff1799f6cbd89597db65fd. Explicit driver dependency on the bridge is no longer needed since switchdev_bridge_port_{,un}offload() is no longer implemented by the bridge driver but by switchdev. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03net: sparx5: fix bitmask on 32-bit targetsArnd Bergmann
I saw the build failure that was fixed in commit 6387f65e2acb ("net: sparx5: fix compiletime_assert for GCC 4.9") and noticed another issue that was introduced in the same patch: Using GENMASK() to create a 64-bit mask does not work on 32-bit architectures. This probably won't ever happen on this driver since it's specific to a 64-bit SoC, but it's better to write it portably, so use GENMASK_ULL() instead. Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: sparx5: fix compiletime_assert for GCC 4.9Jakub Kicinski
Stephen reports sparx5 broke GCC 4.9 build. Move the compiletime_assert() out of the static function. Compile-tested only, no object code changes. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27net: build all switchdev drivers as modules when the bridge is a moduleVladimir Oltean
Currently, all drivers depend on the bool CONFIG_NET_SWITCHDEV, but only the drivers that call some sort of function exported by the bridge, like br_vlan_enabled() or whatever, have an extra dependency on CONFIG_BRIDGE. Since the blamed commit, all switchdev drivers have a functional dependency upon switchdev_bridge_port_{,un}offload(), which is a pair of functions exported by the bridge module and not by the bridge-independent part of CONFIG_NET_SWITCHDEV. Problems appear when we have: CONFIG_BRIDGE=m CONFIG_NET_SWITCHDEV=y CONFIG_TI_CPSW_SWITCHDEV=y because cpsw, am65_cpsw and sparx5 will then be built-in but they will call a symbol exported by a loadable module. This is not possible and will result in the following build error: drivers/net/ethernet/ti/cpsw_new.o: in function `cpsw_netdevice_event': drivers/net/ethernet/ti/cpsw_new.c:1520: undefined reference to `switchdev_bridge_port_offload' drivers/net/ethernet/ti/cpsw_new.c:1537: undefined reference to `switchdev_bridge_port_unoffload' As mentioned, the other switchdev drivers don't suffer from this because switchdev_bridge_port_offload() is not the first symbol exported by the bridge that they are calling, so they already needed to deal with this in the same way. Fixes: 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23net: bridge: switchdev: allow the TX data plane forwarding to be offloadedTobias Waldekranz
Allow switchdevs to forward frames from the CPU in accordance with the bridge configuration in the same way as is done between bridge ports. This means that the bridge will only send a single skb towards one of the ports under the switchdev's control, and expects the driver to deliver the packet to all eligible ports in its domain. Primarily this improves the performance of multicast flows with multiple subscribers, as it allows the hardware to perform the frame replication. The basic flow between the driver and the bridge is as follows: - When joining a bridge port, the switchdev driver calls switchdev_bridge_port_offload() with tx_fwd_offload = true. - The bridge sends offloadable skbs to one of the ports under the switchdev's control using skb->offload_fwd_mark = true. - The switchdev driver checks the skb->offload_fwd_mark field and lets its FDB lookup select the destination port mask for this packet. v1->v2: - convert br_input_skb_cb::fwd_hwdoms to a plain unsigned long - introduce a static key "br_switchdev_fwd_offload_used" to minimize the impact of the newly introduced feature on all the setups which don't have hardware that can make use of it - introduce a check for nbp->flags & BR_FWD_OFFLOAD to optimize cache line access - reorder nbp_switchdev_frame_mark_accel() and br_handle_vlan() in __br_forward() - do not strip VLAN on egress if forwarding offload on VLAN-aware bridge is being used - propagate errors from .ndo_dfwd_add_station() if not EOPNOTSUPP v2->v3: - replace the solution based on .ndo_dfwd_add_station with a solution based on switchdev_bridge_port_offload - rename BR_FWD_OFFLOAD to BR_TX_FWD_OFFLOAD v3->v4: rebase v4->v5: - make sure the static key is decremented on bridge port unoffload - more function and variable renaming and comments for them: br_switchdev_fwd_offload_used to br_switchdev_tx_fwd_offload br_switchdev_accels_skb to br_switchdev_frame_uses_tx_fwd_offload nbp_switchdev_frame_mark_tx_fwd to nbp_switchdev_frame_mark_tx_fwd_to_hwdom nbp_switchdev_frame_mark_accel to nbp_switchdev_frame_mark_tx_fwd_offload fwd_accel to tx_fwd_offload Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts are simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-22net: sparx5: fix unmet dependencies warningRandy Dunlap
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-22net: bridge: move the switchdev object replay helpers to "push" modeVladimir Oltean
Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"), DSA has introduced some bridge helpers that replay switchdev events (FDB/MDB/VLAN additions and deletions) that can be lost by the switchdev drivers in a variety of circumstances: - an IP multicast group was host-joined on the bridge itself before any switchdev port joined the bridge, leading to the host MDB entries missing in the hardware database. - during the bridge creation process, the MAC address of the bridge was added to the FDB as an entry pointing towards the bridge device itself, but with no switchdev ports being part of the bridge yet, this local FDB entry would remain unknown to the switchdev hardware database. - a VLAN/FDB/MDB was added to a bridge port that is a LAG interface, before any switchdev port joined that LAG, leading to the hardware database missing those entries. - a switchdev port left a LAG that is a bridge port, while the LAG remained part of the bridge, and all FDB/MDB/VLAN entries remained installed in the hardware database of the switchdev port. Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events for LAG ports which didn't request replay"), DSA introduced a method, based on a const void *ctx, to ensure that two switchdev ports under the same LAG that is a bridge port do not see the same MDB/VLAN entry being replayed twice by the bridge, once for every bridge port that joins the LAG. With so many ordering corner cases being possible, it seems unreasonable to expect a switchdev driver writer to get it right from the first try. Therefore, now that DSA has experimented with the bridge replay helpers for a little bit, we can move the code to the bridge driver where it is more readily available to all switchdev drivers. To convert the switchdev object replay helpers from "pull mode" (where the driver asks for them) to a "push mode" (where the bridge offers them automatically), the biggest problem is that the bridge needs to be aware when a switchdev port joins and leaves, even when the switchdev is only indirectly a bridge port (for example when the bridge port is a LAG upper of the switchdev). Luckily, we already have a hook for that, in the form of the newly introduced switchdev_bridge_port_offload() and switchdev_bridge_port_unoffload() calls. These offer a natural place for hooking the object addition and deletion replays. Extend the above 2 functions with: - pointers to the switchdev atomic notifier (for FDB replays) and the blocking notifier (for MDB and VLAN replays). - the "const void *ctx" argument required for drivers to be able to disambiguate between which port is targeted, when multiple ports are lowers of the same LAG that is a bridge port. Most of the drivers pass NULL to this argument, except the ones that support LAG offload and have the proper context check already in place in the switchdev blocking notifier handler. Also unexport the replay helpers, since nobody except the bridge calls them directly now. Note that: (a) we abuse the terminology slightly, because FDB entries are not "switchdev objects", but we count them as objects nonetheless. With no direct way to prove it, I think they are not modeled as switchdev objects because those can only be installed by the bridge to the hardware (as opposed to FDB entries which can be propagated in the other direction too). This is merely an abuse of terms, FDB entries are replayed too, despite not being objects. (b) the bridge does not attempt to sync port attributes to newly joined ports, just the countable stuff (the objects). The reason for this is simple: no universal and symmetric way to sync and unsync them is known. For example, VLAN filtering: what to do on unsync, disable or leave it enabled? Similarly, STP state, ageing timer, etc etc. What a switchdev port does when it becomes standalone again is not really up to the bridge's competence, and the driver should deal with it. On the other hand, replaying deletions of switchdev objects can be seen a matter of cleanup and therefore be treated by the bridge, hence this patch. We make the replay helpers opt-in for drivers, because they might not bring immediate benefits for them: - nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(), so br_vlan_replay() should not do anything for the new drivers on which we call it. The existing drivers where there was even a slight possibility for there to exist a VLAN on a bridge port before they join it are already guarded against this: mlxsw and prestera deny joining LAG interfaces that are members of a bridge. - br_fdb_replay() should now notify of local FDB entries, but I patched all drivers except DSA to ignore these new entries in commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"). Driver authors can lift this restriction as they wish, and when they do, they can also opt into the FDB replay functionality. - br_mdb_replay() should fix a real issue which is described in commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"). However most drivers do not offload the SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw offload this switchdev object, and I don't completely understand the way in which they offload this switchdev object anyway. So I'll leave it up to these drivers' respective maintainers to opt into br_mdb_replay(). So most of the drivers pass NULL notifier blocks for the replay helpers, except: - dpaa2-switch which was already acked/regression-tested with the helpers enabled (and there isn't much of a downside in having them) - ocelot which already had replay logic in "pull" mode - DSA which already had replay logic in "pull" mode An important observation is that the drivers which don't currently request bridge event replays don't even have the switchdev_bridge_port_{offload,unoffload} calls placed in proper places right now. This was done to avoid unnecessary rework for drivers which might never even add support for this. For driver writers who wish to add replay support, this can be used as a tentative placement guide: https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/ Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-22net: bridge: switchdev: let drivers inform which bridge ports are offloadedVladimir Oltean
On reception of an skb, the bridge checks if it was marked as 'already forwarded in hardware' (checks if skb->offload_fwd_mark == 1), and if it is, it assigns the source hardware domain of that skb based on the hardware domain of the ingress port. Then during forwarding, it enforces that the egress port must have a different hardware domain than the ingress one (this is done in nbp_switchdev_allowed_egress). Non-switchdev drivers don't report any physical switch id (neither through devlink nor .ndo_get_port_parent_id), therefore the bridge assigns them a hardware domain of 0, and packets coming from them will always have skb->offload_fwd_mark = 0. So there aren't any restrictions. Problems appear due to the fact that DSA would like to perform software fallback for bonding and team interfaces that the physical switch cannot offload. +-- br0 ---+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 There, it is desirable that the presence of swp3 and swp4 under a non-offloaded LAG does not preclude us from doing hardware bridging beteen swp0, swp1 and swp2. The bandwidth of the CPU is often times high enough that software bridging between {swp0,swp1,swp2} and bond0 is not impractical. But this creates an impossible paradox given the current way in which port hardware domains are assigned. When the driver receives a packet from swp0 (say, due to flooding), it must set skb->offload_fwd_mark to something. - If we set it to 0, then the bridge will forward it towards swp1, swp2 and bond0. But the switch has already forwarded it towards swp1 and swp2 (not to bond0, remember, that isn't offloaded, so as far as the switch is concerned, ports swp3 and swp4 are not looking up the FDB, and the entire bond0 is a destination that is strictly behind the CPU). But we don't want duplicated traffic towards swp1 and swp2, so it's not ok to set skb->offload_fwd_mark = 0. - If we set it to 1, then the bridge will not forward the skb towards the ports with the same switchdev mark, i.e. not to swp1, swp2 and bond0. Towards swp1 and swp2 that's ok, but towards bond0? It should have forwarded the skb there. So the real issue is that bond0 will be assigned the same hardware domain as {swp0,swp1,swp2}, because the function that assigns hardware domains to bridge ports, nbp_switchdev_add(), recurses through bond0's lower interfaces until it finds something that implements devlink (calls dev_get_port_parent_id with bool recurse = true). This is a problem because the fact that bond0 can be offloaded by swp3 and swp4 in our example is merely an assumption. A solution is to give the bridge explicit hints as to what hardware domain it should use for each port. Currently, the bridging offload is very 'silent': a driver registers a netdevice notifier, which is put on the netns's notifier chain, and which sniffs around for NETDEV_CHANGEUPPER events where the upper is a bridge, and the lower is an interface it knows about (one registered by this driver, normally). Then, from within that notifier, it does a bunch of stuff behind the bridge's back, without the bridge necessarily knowing that there's somebody offloading that port. It looks like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v call_netdevice_notifiers | v dsa_slave_netdevice_event | v oh, hey! it's for me! | v .port_bridge_join What we do to solve the conundrum is to be less silent, and change the switchdev drivers to present themselves to the bridge. Something like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | hardware domain for v | this port, and zero dsa_slave_netdevice_event | if I got nothing. | | v | oh, hey! it's for me! | | | v | .port_bridge_join | | | +------------------------+ switchdev_bridge_port_offload(swp0, swp0) Then stacked interfaces (like bond0 on top of swp3/swp4) would be treated differently in DSA, depending on whether we can or cannot offload them. The offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | switchdev mark for v | bond0. dsa_slave_netdevice_event | Coincidentally (or not), | | bond0 and swp0, swp1, swp2 v | all have the same switchdev hmm, it's not quite for me, | mark now, since the ASIC but my driver has already | is able to forward towards called .port_lag_join | all these ports in hw. for it, because I have | a port with dp->lag_dev == bond0. | | | v | .port_bridge_join | for swp3 and swp4 | | | +------------------------+ switchdev_bridge_port_offload(bond0, swp3) switchdev_bridge_port_offload(bond0, swp4) And the non-offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge waiting: call_netdevice_notifiers ^ huh, switchdev_bridge_port_offload | | wasn't called, okay, I'll use a v | hwdom of zero for this one. dsa_slave_netdevice_event : Then packets received on swp0 will | : not be software-forwarded towards v : swp1, but they will towards bond0. it's not for me, but bond0 is an upper of swp3 and swp4, but their dp->lag_dev is NULL because they couldn't offload it. Basically we can draw the conclusion that the lowers of a bridge port can come and go, so depending on the configuration of lowers for a bridge port, it can dynamically toggle between offloaded and unoffloaded. Therefore, we need an equivalent switchdev_bridge_port_unoffload too. This patch changes the way any switchdev driver interacts with the bridge. From now on, everybody needs to call switchdev_bridge_port_offload and switchdev_bridge_port_unoffload, otherwise the bridge will treat the port as non-offloaded and allow software flooding to other ports from the same ASIC. Note that these functions lay the ground for a more complex handshake between switchdev drivers and the bridge in the future. For drivers that will request a replay of the switchdev objects when they offload and unoffload a bridge port (DSA, dpaa2-switch, ocelot), we place the call to switchdev_bridge_port_unoffload() strategically inside the NETDEV_PRECHANGEUPPER notifier's code path, and not inside NETDEV_CHANGEUPPER. This is because the switchdev object replay helpers need the netdev adjacency lists to be valid, and that is only true in NETDEV_PRECHANGEUPPER. Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch: regression Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> # ocelot-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08net: microchip: sparx5: fix kconfig warningRandy Dunlap
PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend on OF since 'select' does not follow any dependencies. WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: linux-arm-kernel@lists.infradead.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()Nathan Chancellor
Clang warns: drivers/net/ethernet/microchip/sparx5/sparx5_main.c:760:29: warning: variable 'mac_addr' is uninitialized when used here [-Wuninitialized] if (of_get_mac_address(np, mac_addr)) { ^~~~~~~~ drivers/net/ethernet/microchip/sparx5/sparx5_main.c:669:14: note: initialize the variable 'mac_addr' to silence this warning u8 *mac_addr; ^ = NULL 1 warning generated. mac_addr is only used to store the value retrieved from of_get_mac_address(), which is then copied into the base_mac member of the sparx5 struct using ether_addr_copy(). It is easier to just use the base_mac address directly, which avoids the warning and the extra copy. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1413 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: sparx5: fix error return code in sparx5_register_notifier_blocks()Yang Yingliang
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d6fce5141929 ("net: sparx5: add switching support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: sparx5: fix return value check in sparx5_create_targets()Yang Yingliang
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: sparx5: check return value after calling platform_get_resource()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-28net: switchdev: add a context void pointer to struct switchdev_notifier_infoVladimir Oltean
In the case where the driver asks for a replay of a certain type of event (port object or attribute) for a bridge port that is a LAG, it may do so because this port has just joined the LAG. But there might already be other switchdev ports in that LAG, and it is preferable that those preexisting switchdev ports do not act upon the replayed event. The solution is to add a context to switchdev events, which is NULL most of the time (when the bridge layer initiates the call) but which can be set to a value controlled by the switchdev driver when a replay is requested. The driver can then check the context to figure out if all ports within the LAG should act upon the switchdev event, or just the ones that match the context. We have to modify all switchdev_handle_* helper functions as well as the prototypes in the drivers that use these helpers too, because these helpers hide the underlying struct switchdev_notifier_info from us and there is no way to retrieve the context otherwise. The context structure will be populated and used in later patches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: sparx5: add ethtool configuration and statistics supportSteen Hegelund
This adds statistic counters for the network interfaces provided by the driver. It also adds CPU port counters (which are not exposed by ethtool). This also adds support for configuring the network interface parameters via ethtool: speed, duplex, aneg etc. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: sparx5: add calendar bandwidth allocation supportSteen Hegelund
This configures the Sparx5 calendars according to the bandwidth requested in the Device Tree nodes. It also checks if the total requested bandwidth is within the specs of the detected Sparx5 models limits. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: sparx5: add switching supportSteen Hegelund
This adds SwitchDev support by hardware offloading the software bridge. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: sparx5: add vlan supportSteen Hegelund
This adds Sparx5 VLAN support. Sparx5 has more VLAN features than provided here, but these will be added in later series. For now we only add the basic L2 features. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24net: sparx5: add mactable supportSteen Hegelund
This adds the Sparx5 MAC tables: listening for MAC table updates and updating on request. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-29 12:44:45 +0000