summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip
AgeCommit message (Collapse)Author
2022-05-27net: lan743x: PCI11010 / PCI11414 fixRaju Lakkaraju
Fix the MDIO interface declarations to reflect what is currently supported by the PCI11010 / PCI11414 devices (C22 for RGMII and C22_C45 for SGMII) Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-26net: lan966x: check devm_of_phy_get() for -EDEFER_PROBEMichael Walle
At the moment, if devm_of_phy_get() returns an error the serdes simply isn't set. While it is bad to ignore an error in general, there is a particular bug that network isn't working if the serdes driver is compiled as a module. In that case, devm_of_phy_get() returns -EDEFER_PROBE and the error is silently ignored. The serdes is optional, it is not there if the port is using RGMII, in which case devm_of_phy_get() returns -ENODEV. Rearrange the error handling so that -ENODEV will be handled but other error codes will abort the probing. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220525231239.1307298-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-22net: sparx5: switchdev: fix typo in commentJulia Lawall
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/mellanox/mlx5/core/main.c b33886971dbc ("net/mlx5: Initialize flow steering during driver probe") 40379a0084c2 ("net/mlx5_fpga: Drop INNOVA TLS support") f2b41b32cde8 ("net/mlx5: Remove ipsec_ops function table") https://lore.kernel.org/all/20220519040345.6yrjromcdistu7vh@sx1/ 16d42d313350 ("net/mlx5: Drain fw_reset when removing device") 8324a02c342a ("net/mlx5: Add exit route when waiting for FW") https://lore.kernel.org/all/20220519114119.060ce014@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh e274f7154008 ("selftests: mptcp: add subflow limits test-cases") b6e074e171bc ("selftests: mptcp: add infinite map testcase") 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type") https://lore.kernel.org/all/20220516111918.366d747f@canb.auug.org.au/ net/mptcp/options.c ba2c89e0ea74 ("mptcp: fix checksum byte order") 1e39e5a32ad7 ("mptcp: infinite mapping sending") ea66758c1795 ("tcp: allow MPTCP to update the announced window") https://lore.kernel.org/all/20220519115146.751c3a37@canb.auug.org.au/ net/mptcp/pm.c 95d686517884 ("mptcp: fix subflow accounting on close") 4d25247d3ae4 ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs") https://lore.kernel.org/all/20220516111435.72f35dca@canb.auug.org.au/ net/mptcp/subflow.c ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure") 0348c690ed37 ("mptcp: add the fallback check") f8d4bcacff3b ("mptcp: infinite mapping receiving") https://lore.kernel.org/all/20220519115837.380bb8d4@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-17net: lan966x: Fix assignment of the MAC addressHoratiu Vultur
The following two scenarios were failing for lan966x. 1. If the port had the address X and then trying to assign the same address, then the HW was just removing this address because first it tries to learn new address and then delete the old one. As they are the same the HW remove it. 2. If the port eth0 was assigned the same address as one of the other ports eth1 then when assigning back the address to eth0 then the HW was deleting the address of eth1. The case 1. is fixed by checking if the port has already the same address while case 2. is fixed by checking if the address is used by any other port. Fixes: e18aba8941b40b ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220513180030.3076793-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-12net: lan966x: Fix use of pointer after being freedHoratiu Vultur
The smatch found the following warning: drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c:736 lan966x_fdma_reload() warn: 'rx_dcbs' was already freed. This issue can happen when changing the MTU on one of the ports and once the RX buffers are allocated and then the TX buffer allocation fails. In that case the RX buffers should not be restore. This fix this issue such that the RX buffers will not be restored if the TX buffers failed to be allocated. Fixes: 2ea1cbac267e2a ("net: lan966x: Update FDMA to change MTU.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220511204059.2689199-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-08eth: switch to netif_napi_add_weight()Jakub Kicinski
Switch all Ethernet drivers which use custom napi weights to the new API. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05net: move snowflake callers to netif_napi_add_tx_weight()Jakub Kicinski
Make the drivers with custom tx napi weight call netif_napi_add_tx_weight(). Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20220504163725.550782-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05net: sparx5: Add handling of host MDB entriesCasper Andersson
Handle adding and removing MDB entries for host Signed-off-by: Casper Andersson <casper.casan@gmail.com> Link: https://lore.kernel.org/r/20220503093922.1630804-1-casper.casan@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-30net: lan966x: remove PHY reset supportMichael Walle
The PHY subsystem as well as the MIIM mdio driver (in case of the integrated PHYs) will take care of the resets. A separate reset driver isn't needed. There is no in-tree user of this feature. Remove the support. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27net: lan966x: Add support for PTP_PF_EXTTSHoratiu Vultur
Extend the PTP programmable pins to implement also PTP_PF_EXTTS function. The PTP pin can be configured to capture only on the rising edge of the PPS signal. And once an event is seen then an interrupt is generated and the local time counter is saved. The interrupt is shared between all the pins. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Add support for PTP_PF_PEROUTHoratiu Vultur
Lan966x has 8 PTP programmable pins, where the last pins is hardcoded to be used by PHC0, which does the frame timestamping. All the rest of the PTP pins can be shared between the PHCs and can have different functions like perout or extts. For now add support for PTP_FS_PEROUT. The HW is not able to support absolute start time but can use the nsec for phase adjustment when generating PPS. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Add registers used to configure the PTP pinHoratiu Vultur
Add registers that are used to configure the PTP pins. These registers are used to enable the interrupts per PTP pin and to set the waveform generated by the pin. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: lan966x: Change the PTP pin used to read/write the PHC.Horatiu Vultur
To read/write a value to a PHC, it is required to use a PTP pin. Currently it is used pin 5, but change to pin 7 as is the last pin. All the other pins will have different functions. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25net: lan966x: fix a couple off by one bugsDan Carpenter
The lan966x->ports[] array has lan966x->num_phys_ports elements. These are assigned in lan966x_probe(). That means the > comparison should be changed to >=. The first off by one check is harmless but the second one could lead to an out of bounds access and a crash. Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-15net: lan966x: Make sure to release ptp interruptHoratiu Vultur
When the lan966x driver is removed make sure to remove also the ptp_irq IRQ. Fixes: e85a96e48e3309 ("net: lan966x: Add support for ptp interrupts") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220413195716.3796467-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
2022-04-11net: lan966x: Update FDMA to change MTU.Horatiu Vultur
When changing the MTU, it is required to change also the size of the DBs. In case those frames will arrive to CPU. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Add FDMA functionalityHoratiu Vultur
Ethernet frames can be extracted or injected to or from the device's DDR memory. There is one channel for injection and one channel for extraction. Each of these channels contain a linked list of DCBs which contains DB. The DCB contains only 1 DB for both the injection and extraction. Each DB contains a frame. Every time when a frame is received or transmitted an interrupt is generated. It is not possible to use both the FDMA and the manual injection/extraction of the frames. Therefore the FDMA has priority over the manual because of better performance values. FDMA: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 420 MBytes 352 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 420 MBytes 351 Mbits/sec receiver iperf -c 192.168.1.1 -R [ 5] 0.00-10.01 sec 528 MBytes 442 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 524 MBytes 440 Mbits/sec receiver Manual: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 93.8 MBytes 78.5 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 93.8 MBytes 78.4 Mbits/sec receiver ipers -c 192.168.1.1 -R [ 5] 0.00-10.03 sec 121 MBytes 101 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 118 MBytes 99.0 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Expose functions that are needed by FDMAHoratiu Vultur
Expose the following functions 'lan966x_hw_offload', 'lan966x_ifh_get_src_port' and 'lan966x_ifh_get_timestamp' in lan966x_main.h so they can be accessed by FDMA. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Add registers that are used for FDMA.Horatiu Vultur
Add the registers that are used to configure the FDMA. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Stop processing the MAC entry is port is wrong.Horatiu Vultur
Currently when getting a new MAC is learn, the HW generates an interrupt. So then the SW will check the new entry and checks if it arrived on a correct port. If it didn't just generate a warning. But this could still crash the system. Therefore stop processing that entry when an issue is seen. Fixes: 5ccd66e01cbef8 ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Fix when a port's upper is changed.Horatiu Vultur
On lan966x it is not allowed to have foreign interfaces under a bridge which already contains lan966x ports. So when a port leaves the bridge it would call switchdev_bridge_port_unoffload which eventually will notify the other ports that bridge left the vlan group but that is not true because the bridge is still part of the vlan group. Therefore when a port leaves the bridge, stop generating replays because already the HW cleared after itself and the other ports don't need to do anything else. Fixes: cf2f60897e921e ("net: lan966x: Add support to offload the forwarding.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Fix IGMP snooping when frames have vlan tagHoratiu Vultur
In case an IGMP frame has a vlan tag, then the function lan966x_hw_offload couldn't figure out that is a IGMP frame. Therefore the SW thinks that the frame was already forward by the HW which is not true. Extend lan966x_hw_offload to pop the vlan tag if are any and then check for IGMP frames. Fixes: 47aeea0d57e80c ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED ") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11net: lan966x: Update lan966x_ptp_get_nominal_valueHoratiu Vultur
The clk_per_cfg register represents the value added to the system clock for each clock cycle. The issue is that the default value is wrong, meaning that in case the DUT was a grandmaster then everone in the network was too slow. In case there was a grandmaster, then there is no issue because the DUT will configure clk_per_cfg register based on the master frequency. Fixes: d096459494a887 ("net: lan966x: Add support for ptp clocks") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-30net: sparx5: uses, depends on BRIDGE or !BRIDGERandy Dunlap
Fix build errors when BRIDGE=m and SPARX5_SWITCH=y: riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L305': sparx5_switchdev.c:(.text+0xdb0): undefined reference to `br_vlan_enabled' riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L283': sparx5_switchdev.c:(.text+0xee0): undefined reference to `br_vlan_enabled' Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220330012025.29560-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-29net: lan966x: fix kernel oops on ioctl when I/F is downMichael Walle
ioctls handled by phy_mii_ioctl() will cause a kernel oops when the interface is down. Fix it by making sure there is a PHY attached. Fixes: 735fec995b21 ("net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220328220350.3118969-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-26net: sparx5: switchdev: fix possible NULL pointer dereferenceZheng Yongjun
As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer. Fixes: 10615907e9b51 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: sparx5: depends on PTP_1588_CLOCK_OPTIONALRandy Dunlap
Fix build errors when PTP_1588_CLOCK=m and SPARX5_SWTICH=y. arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.o: in function `sparx5_get_ts_info': sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index' arc-linux-ld: sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index' arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_init': sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register' arc-linux-ld: sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register' arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_deinit': sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister' arc-linux-ld: sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister' arc-linux-ld: sparx5_ptp.c:(.text+0xf38): undefined reference to `ptp_clock_unregister' arc-linux-ld: sparx5_ptp.c:(.text+0xf46): undefined reference to `ptp_clock_unregister' arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o:sparx5_ptp.c:(.text+0xf46): more undefined references to `ptp_clock_unregister' follow Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Steen Hegelund <steen.hegelund@microchip.com> Cc: Bjarni Jonasson <bjarni.jonasson@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-25net: sparx5: Refactor mdb handling according to feedbackCasper Andersson
- Remove mact_lookup and use new mact_find instead. - Make pgid_read_mask function. - Set PGID arbiter to start searching at PGID_BASE + 8. This is according to feedback on previous patch. https://lore.kernel.org/netdev/20220322081823.wqbx7vud4q7qtjuq@wse-c0155/T/#t Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-25net: sparx5: Remove unused GLAG handling in PGIDCasper Andersson
Removes PGID handling for GLAG since it is not used yet. According to feedback on previous patch. https://lore.kernel.org/netdev/20220322081823.wqbx7vud4q7qtjuq@wse-c0155/T/#t Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: sparx5: Add mdb handlersCasper Andersson
Adds mdb handlers. Uses the PGID arbiter to find a free entry in the PGID table for the multicast group port mask. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21net: sparx5: Add arbiter for managing PGID tableCasper Andersson
The PGID (Port Group ID) table holds port masks for different purposes. The first 72 are reserved for port destination masks, flood masks, and CPU forwarding. The rest are shared between multicast, link aggregation, and virtualization profiles. The GLAG area is reserved to not be used by anything else, since it is a subset of the MCAST area. The arbiter keeps track of which entries are in use. You can ask for a free ID or give back one you are done using. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21net: sparx5: Use vid 1 when bridge default vid 0 to avoid collisionCasper Andersson
Standalone ports use vid 0. Let the bridge use vid 1 when "vlan_default_pvid 0" is set to avoid collisions. Since no VLAN is created when default pvid is 0 this is set at "PORT_ATTR_SET" and handled in the Switchdev fdb handler. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support for PTP-IO Event Output (Periodic Output)Raju Lakkaraju
Add support for PTP-IO Event Output (Periodic Output - perout) for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)Raju Lakkaraju
PTP-IOs block provides for time stamping PTP-IO input events. PTP-IOs are numbered from 0 to 11. When a PTP-IO is enabled by the corresponding bit in the PTP-IO Capture Configuration Register, a rising or falling edge, respectively, will capture the 1588 Local Time Counter Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support for OTPRaju Lakkaraju
Add new the OTP read and write access functions for PCI11010/PCI11414 chips PCI11010/PCI11414 OTP module register offsets are different from LAN743x OTP module Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support for EEPROMRaju Lakkaraju
Add new the EEPROM read and write access functions and system lock protection to access by devices for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support to display Tx Queue statisticsRaju Lakkaraju
Tx 4 queue statistics display through ethtool application Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-15net: sparx5: Use Switchdev fdb events for managing fdb entriesCasper Andersson
Changes the handling of fdb entries to use Switchdev events, instead of the previous "sync_bridge" and "sync_port" which only run when adding or removing VLANs on the bridge. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Link: https://lore.kernel.org/r/20220314160918.4rfrrfgmbsf2pxl3@wse-c0155 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-15net: sparx5: fix a couple warning messagesDan Carpenter
The WARN_ON() macro takes a condition, not a warning message. Fixes: 0933bd04047c ("net: sparx5: Add support for ptp clocks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220314140327.GB30883@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-11net: lan966x: Improve the CPU TX bitrate.Horatiu Vultur
When doing manual injection of the frame, it is required to check if the TX FIFO is ready to accept the next word of the frame. For this we are using 'readx_poll_timeout_atomic', the only problem is that before it actually checks the status, is determining the time when to finish polling the status. Which seems to be an expensive operation. Therefore check the status of the TX FIFO before calling 'readx_poll_timeout_atomic'. Doing this will improve the TX bitrate by ~70%. Because 99% the FIFO is ready by that time. The measurements were done using iperf3. Before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.03 sec 55.2 MBytes 46.2 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 53.8 MBytes 45.0 Mbits/sec receiver After: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 95.0 MBytes 78.9 Mbits/sec 0 sender [ 5] 0.00-10.11 sec 95.0 MBytes 78.8 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-09net: lan966x: Add spinlock for frame transmission from CPU.Horatiu Vultur
The registers used to inject a frame to one of the ports is shared between all the net devices. Therefore, there can be race conditions for accessing the registers when two processes send frames at the same time on different ports. To fix this, add a spinlock around the function 'lan966x_port_ifh_xmit()'. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08net: lan966x: allow offloading timestamp operations to the PHYHoratiu Vultur
In case the MAC is using 'netif_rx()' to deliver the skb up the network stack, it needs to check whether 'skb_defer_rx_timestmap()' is necessary or not. In case is needed then don't call 'netif_rx()' Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220307094632.3764266-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-04net: sparx5: Fix initialization of variables on stackHoratiu Vultur
The variables 'res' inside the functions sparx5_ptp_get_1ppm and sparx5_ptp_get_nominal_value was not initialized. So in case of the default case of the switch after, it would return an uninitialized variable. This makes also the clang builds to failed. Fixes: 0933bd04047c3b ("net: sparx5: Add support for ptp clocks") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-04net: sparx5: Implement get_ts_infoHoratiu Vultur
Implement the function get_ts_info in ethtool_ops which is needed to get the HW capabilities for timestamping. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: sparx5: Add support for ptp interruptsHoratiu Vultur
When doing 2-step timestamping the HW will generate an interrupt when it managed to timestamp a frame. It is the SW responsibility to read it from the FIFO. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-04net: sparx5: Update extraction/injection for timestampingHoratiu Vultur
Update both the extraction and injection to do timestamping of the frames. The extraction is always doing the timestamping while for injection is doing the timestamping only if it is configured. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-29 10:00:10 +0000