| Age | Commit message (Collapse) | Author |
|---|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.
Before the change:
$ethtool enP30832s1
> No data available
After the change:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1727674934-12130-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The mana_set_channels() function requires detaching the mana
driver and reattaching it with changed channel values.
During this operation if the system is low on memory, the reattach
might fail, causing the network device being down.
To avoid this we pre-allocate buffers at the beginning of set operation,
to prevent complete network loss
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1725248734-21760-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the values of WQs for RX and TX queues for MANA devices
are hardcoded to default sizes.
Allow configuring these values for MANA devices as ringparam
configuration(get/set) through ethtool_ops.
Pre-allocate buffers at the beginning of this operation, to
prevent complete network loss in low-memory conditions.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow variable size indirection table allocation in MANA instead
of using a constant value MANA_INDIRECT_TABLE_SIZE.
The size is now derived from the MANA_QUERY_VPORT_CONFIG and the
indirection table is allocated dynamically.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1718015319-9609-1-git-send-email-shradhagupta@linux.microsoft.com
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in struct field hc_tx_err_sqpdid_enforecement.
Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231128095304.515492-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend performance counter stats in 'ethtool -S <interface>'
for MANA VF to include all GDMA stat counter.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://lore.kernel.org/r/1700830950-803-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extended performance counter stats in 'ethtool -S <interface>'
for MANA VF to include GDMA tx LSO packets and bytes count.
Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
3. Validated the GDMA stat packets and byte counters
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the
frequent and parallel code path of all queues. So, r/w into this
single shared variable by many threads on different CPUs creates a
lot caching and memory overhead, hence perf regression. And, it's
not accurate due to the high volume concurrent r/w.
For example, a workload is iperf with 128 threads, and with RPS
enabled. We saw perf regression of 25% with the previous patch
adding the counters. And this patch eliminates the regression.
Since the error path of mana_poll_rx_cq() already has warnings, so
keeping the counter and convert it to a per-queue variable is not
necessary. So, just remove this counter from this high frequency
code path.
Also, remove the tx_cqes counter for the same reason. We have
warnings & other counters for errors on that path, and don't need
to count every normal cqe processing.
Cc: stable@vger.kernel.org
Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extended performance counter stats in 'ethtool -S <interface>' output
for MANA VF to facilitate troubleshooting.
Tested-on: Ubuntu22
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Long Li says:
====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]
The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.
* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Define data structures for protection domain and memory registration
net: mana: Define data structures for allocating doorbell page from GDMA
net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
net: mana: Define max values for SGL entries
net: mana: Move header files to a common location
net: mana: Record port number in netdev
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Set the DMA device max segment size
net: mana: Handle vport sharing between devices
net: mana: Record the physical address for doorbell page region
net: mana: Add support for auxiliary device
====================
Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation to add MANA RDMA driver, move all the required header files
to a common location for use by both Ethernet and RDMA drivers.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-8-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a handler of the XDP_REDIRECT return code from a XDP program. The
packets will be flushed at the end of each RX/CQ NAPI poll cycle.
ndo_xdp_xmit() is implemented by sharing the code in mana_xdp_tx().
Ethtool per queue counters are added for XDP redirect and xmit operations.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This counter will show up in ethtool stat. It is the
number of packets received and forwarded by XDP program.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This counter will show up in ethtool stat data.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing code doesn't allow setting the number of queues while the
NIC is down.
Update the ethtool handler functions to support setting the number of
queues while the NIC is at down state.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a VF driver for Microsoft Azure Network Adapter (MANA) that will be
available in the future.
Co-developed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Co-developed-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
