summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/oki-semi
AgeCommit message (Collapse)Author
2017-02-17net: oki-semi: pch_gbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14pch_gbe: Omit private ndo_get_stats functionTobias Klauser
pch_gbe_get_stats() just returns dev->stats so we can leave it out altogether and let dev_get_stats() do the job. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28pch_gbe: replace private tx ring lock with common netif_tx_lockfrançois romieu
pch_gbe_tx_ring.tx_lock is only used in the hard_xmit handler and in the transmit completion reaper called from NAPI context. Compile-tested only. Potential victims Cced. Someone more knowledgeable may check if pch_gbe_tx_queue could have some use for a mmiowb. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Cress <andy.cress@us.kontron.com> Cc: bryan@fossetcon.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26pch_gbe: fix bogus trylock conversionFlorian Westphal
Should have converted 'if (trylock)' to 'lock'. Fixes: a6086a893718db ("drivers: net: remove NETDEV_TX_LOCKED") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26drivers: net: remove NETDEV_TX_LOCKEDFlorian Westphal
replace the trylock by a full spin_lock and remove TX_LOCKED return value. Followup patch will remove TX_LOCKED from the kernel. Cc: Jon Mason <jdmason@kudzu.us> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22pch_gbe: 'select' NET_PTP_CLASSIFY.David S. Miller
Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16net: pch_gbe depends on x86_32Jean Delvare
The pch_gbe driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31net: ptp: do not reimplement PTP/BPF classifierDaniel Borkmann
There are currently pch_gbe, cpts, and ixp4xx_eth drivers that open-code and reimplement a BPF classifier for the PTP protocol. Since all of them effectively do the very same thing and load the very same PTP/BPF filter, we can just consolidate that code by introducing ptp_classify_raw() in the time-stamping core framework which can be used in drivers. As drivers get initialized after bootstrapping the core networking subsystem, they can make use of ptp_insns wrapped through ptp_classify_raw(), which allows to simplify and remove PTP classifier setup code in drivers. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06ethernet: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Santosh Raspatur <santosh@chelsio.com> CC: Dimitris Michailidis <dm@chelsio.com> CC: Michael Chan <mchan@broadcom.com> CC: Santiago Leon <santil@linux.vnet.ibm.com> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Olof Johansson <olof@lixom.net> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Nicolas Pitre <nico@fluxnic.net> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14pch_gbe: Validate hwtstamp_config completely before applying itBen Hutchings
hwtstamp_ioctl() should validate all fields of hwtstamp_config before making any changes. Currently it sets the TX configuration before validating the rx_filter field. Compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24oki-semi: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
2013-08-29drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherentJoe Perches
__GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20pch_gbe: ethtool cannot change parameters when link is downAnders Larsen
When attempting to change e.g. the advertising mask when the link is down ecmd->speed is -1 causing mii_ethtool_sset() to bail out. This bug bit when connecting to a gigabit switch through a 4-pin (industrial) cable, since link negotiation would not complete (both endpoints claimed to be gigabit-capable, but this is not possible with only 4 pins). Any attempt to fix this by setting autonegation to not offer 1000Mbps failed as the setting would not be accepted while the link was still down... Set ecmd->speed to SPEED_1000 to satisfy mii_ethtool_sset() (the actual value of ecmd->speed doesn't matter as long as it is valid, since a re-negotation is forced afterwards). Signed-off-by: Anders Larsen <al@alarsen.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-25pch_gbe: Add MinnowBoard supportDarren Hart
The MinnowBoard uses an AR803x PHY with the PCH GBE which requires special handling. Use the MinnowBoard PCI Subsystem ID to detect this and add a pci_device_id.driver_data structure and functions to handle platform setup. The AR803x does not implement the RGMII 2ns TX clock delay in the trace routing nor via strapping. Add a detection method for the board and the PHY and enable the TX clock delay via the registers. This PHY will hibernate without link for 10 seconds. Ensure the PHY is awake for probe and then disable hibernation. A future improvement would be to convert pch_gbe to using PHYLIB and making sure we can wake the PHY at the necessary times rather than permanently disabling it. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Joe Perches <joe@perches.com> Cc: netdev@vger.kernel.org
2013-07-24pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32Darren Hart
Avoid using magic numbers when we have perfectly good defines just lying around. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: netdev@vger.kernel.org
2013-07-22net: pch_gbe depends on x86Jiri Slaby
Since 4bb1667255a86360721291fe59991d033bbc2f2a (build some drivers only when compile-testing), PTP_1588_CLOCK_PCH depends on (X86 || COMPILE_TEST). But PCH_GBE selects PTP_1588_CLOCK_PCH without depending on x86. Fix this by adding the same dependency here. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: <fengguang.wu@intel.com> [intel's build test robot] Cc: "David S. Miller" <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kbuild-all@01.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28pch_gbe: use managed functions pcim_* and devm_*Andy Shevchenko
This makes the error handling much more simpler than open-coding everything and in addition makes the probe function smaller an tidier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28pch_gbe: convert pr_* to netdev_*Andy Shevchenko
We may use nice macros to prefix our messages with proper device name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28pch_gbe: remove inline keyword for exported functionsAndy Shevchenko
There is no much sense to mark functions inline that are going to be used in the other compile modules. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: Move MII out from under NET_CORE and hide itBen Hutchings
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16pch_gbe: minor: report the actual error on MTU changeVeaceslav Falico
If we can't _up() after changing the MTU, report the actual error instead of -ENOMEM. It can be really misleading cause pch_gbe is usually used in scenarios where the memory amount is really small, and thus hiding the real cause. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/ipip.h The changes made to ipip.h in 'net' were already included in 'net-next' before that header was moved to another location. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26pch_gbe: fix ip_summed checksum reporting on rxVeaceslav Falico
skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17pch_gbe, ptp_pch: Fix the dependency direction between these driversBen Hutchings
In commit a24006ed12616bde1bbdb26868495906a212d8dc ('ptp: Enable clock drivers along with associated net/PHY drivers') I wrongly made PTP_1588_CLOCK_PCH depend on PCH_GBE. The dependency is really the other way around. Therefore make PCH_GBE select PTP_1588_CLOCK_PCH and remove the 'default y' from the latter. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ptp: Enable clock drivers along with associated net/PHY driversBen Hutchings
Where a PTP clock driver is associated with a net or PHY driver, it should be enabled automatically whenever that driver is enabled. Therefore: - Make PTP clock drivers select rather than depending on PTP_1588_CLOCK - Remove separate boolean options for PTP clock drivers that are built as part of net driver modules. (This also fixes cases where the PTP subsystem is wrongly forced to be built-in.) - Set 'default y' for PTP clock drivers that depend on specific net drivers but are built separately Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ptp: Make PTP_1588_CLOCK select rather than depend on PPSBen Hutchings
PTP hardware clock drivers that select PTP_1588_CLOCK must currently also select PPS. For those drivers that don't, the user must enable PPS, then enable PTP_1588_CLOCK, then the driver. Simplify things for developers and users by putting this selection in one place. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01pps, ptp: Remove dependencies on EXPERIMENTALBen Hutchings
These are now established subsystems, and we want drivers to be able to select PPS and PTP_1588_CLOCK without depending on EXPERIMENTAL. Further, the use of EXPERIMENTAL is now deprecated in general. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24pch_gbe: fix error handling in pch_gbe_up()Veaceslav Falico
If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: don't reset MAC_RX on FIFO overflowVeaceslav Falico
Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: don't re-set RX_FIFO_ERR flag in napi_pollVeaceslav Falico
If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: create functions for MAC_RX {en,dis}ableVeaceslav Falico
Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09pch_gbe: Fix build error by selecting all the possible dependencies.Haicheng Li
Fengguang reported a kernel build failure as following: drivers/built-in.o: In function `pch_gbe_ioctl': pch_gbe_main.c:(.text+0x510370): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x510393): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x5103b3): undefined reference to `pch_ch_control_write' ... It's a regression by commit da1586461. The root cause is that the CONFIG_PPS is not set there, consequently CONFIG_PTP_1588_CLOCK can not be set anyway, which finally causes ptp_pch and pch_gbe_main build failures. As David prefers to use *select* to fix such module co-dependency issues, this patch explicitly selects all the possible dependencies of PCH_PTP. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Haicheng Li <haicheng.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-02pch_gbe: Fix PTP dependencies.David S. Miller
The config combination: CONFIG_PCH_GBE=y CONFIG_PCH_PTP=y CONFIG_PTP_1588_CLOCK=m doesn't work, because then you have a built-in kernel object (the PCH_PTP code) referring to symbols in a module (PTP_1588_CLOCK). Fix this like IXGBE, by using "select PTP_1588_CLOCK" instead of a "depends on". Reported-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07netdev: make pci_error_handlers constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-26pch_gbe: vlan skb len fixAndy Cress
pch_gbe_xmit_frame skb->len verification was incorrect in vlan case causing bogus transfer length errors. One correction could be: offset = skb->protocol == htons(ETH_P_8021Q) ? 0 : 4; if (unlikely(skb->len > (adapter->hw.mac.max_frame_size - offset))) However, this verification is not necessary, so remove it. Signed-off-by: Andy Cress <andy.cress@us.kontron.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26pch_gbe: add extra clean txAndy Cress
This adds extra cleaning to the pch_gbe_clean_tx routine to avoid transmit timeouts on some BCM PHYs that have different timing. Also update the DRV_VERSION to 1.01, and show it. Signed-off-by: Andy Cress <andy.cress@us.kontron.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-26pch_gbe: fix transmit watchdog timeoutAndy Cress
An extended ping test with 6 vlans resulted in a driver oops with a netdev transmit timeout. Fix WATCHDOG_TIMEOUT to be more like e1000e at 5 * HZ, to avoid unnecessary transmit timeouts. Signed-off-by: Andy Cress <andy.cress@us.kontron.com> Signed-off-by: David S. Miller <davem@davemloft.net>