| Age | Commit message (Collapse) | Author |
|---|
|
Recovery from broken states can be hard. If the LIF reset in
the fw_down path didn't work because the PCI link was broken,
the FW won't be in the right state for proper restart. We can
fire another LIF reset in the fw_up path to be sure things
are clean on restart.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240529000259.25775-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240529000259.25775-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When possible, keep the stats struct references strictly
in the error handling blocks and out of the fastpath.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up a couple of small dma_addr handling issues
- don't double-count dma-map-err stat in ionic_tx_map_skb()
or ionic_xdp_post_frame()
- return 0 on error from both ionic_tx_map_single() and
ionic_tx_map_frag() and check for !dma_addr in ionic_tx_map_skb()
and ionic_xdp_post_frame()
- be sure to unmap buf_info[0] in ionic_tx_map_skb() error path
- don't assign rx buf->dma_addr until error checked in ionic_rx_page_alloc()
- remove unnecessary dma_addr_t casts
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We call ionic_rx_page_alloc() only on existing buf_info structs from
ionic_rx_fill(). There's no need for the additional NULL test.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A simple change to the struct ionic_queue layout removes some
unnecessary padding and saves us a cacheline in the struct
ionic_qcq layout.
struct ionic_queue {
Before: /* size: 256, cachelines: 4, members: 29 */
After: /* size: 192, cachelines: 3, members: 29 */
struct ionic_qcq {
Before: /* size: 2112, cachelines: 33, members: 23 */
After: /* size: 2048, cachelines: 32, members: 23 */
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rearange a few fields for better cache use and to put the
flags field up into the first cacheline rather than the last.
struct ionic_qcq
Before: /* size: 2176, cachelines: 34, members: 23 */
After: /* size: 2112, cachelines: 33, members: 23 */
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the idev field from ionic_queue, which saves us a
bit of space, and add it into ionic_cq where there's room
within some cacheline padding. Use this pointer rather
than doing a multi level reference from lif->ionic.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing ionic_rx_frags() code is a bit of a mess and can
be cleaned up by unrolling the first frag/header setup from
the loop, then reworking the do-while-loop into a for-loop. We
rename the function to a more descriptive ionic_rx_build_skb().
We also change a couple of related variable names for readability.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the AdminQ clean is a simple action called from only
one place, fold it back into the service routine.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make desc_info structure specific to the queue type, which
allows us to cut down the Rx and AdminQ descriptor sizes by
not including all the fields needed for the Tx desriptors.
Before:
struct ionic_desc_info {
/* size: 464, cachelines: 8, members: 6 */
After:
struct ionic_tx_desc_info {
/* size: 464, cachelines: 8, members: 6 */
struct ionic_rx_desc_info {
/* size: 224, cachelines: 4, members: 2 */
struct ionic_admin_desc_info {
/* size: 8, cachelines: 1, members: 1 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With a little simple math we don't need another struct array to
find the completion structs, so we can remove the ionic_cq_info
altogether. This doesn't really save anything in the ionic_cq
since it gets padded out to the cacheline, but it does remove
the parallel array allocation of 8 * num_descriptors, or about
8 Kbytes per queue in a default configuration.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By reworking the queue service routines to have their own
servicing loops we can remove the cb pointer from desc_info
to save another 8 bytes per descriptor,
This simplifies some of the queue handling indirection and makes
the code a little easier to follow, and keeps service code in
one place rather than jumping between code files.
struct ionic_desc_info
Before: /* size: 472, cachelines: 8, members: 7 */
After: /* size: 464, cachelines: 8, members: 6 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the AdminQ and NotifyQ queue handling to ionic_main.c with
the rest of the adminq code.
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we're not using desc_info pointers mapped in every q
we can simplify and drop the unnecessary utility functions.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the struct pointers from desc_info to use less space.
Instead of pointers in every desc_info to its descriptor,
we can use the queue descriptor index to find the individual
desc, desc_info, and sgl structs in their parallel arrays.
struct ionic_desc_info
Before: /* size: 496, cachelines: 8, members: 10 */
After: /* size: 472, cachelines: 8, members: 7 */
Suggested-by: Neel Patel <npatel2@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MODULE_AUTHOR macro is supposed to be a person
not a company.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clean up complaints from an xmastree.py scan.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the kernel's CQE dim table to align better with the
driver's use of completion queues, and use the tx moderation
when using Tx interrupts.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An earlier change moved the hwstamp queue check into a helper
function with an unlikely(). However, it makes more sense for
the caller to decide if it's likely() or unlikely(), so make
the change to support that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To help make sure we're only accessing things we really need
to access we can cut down on the q->lif->netdev references by
using q->dev which is already in cache.
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of using q->lif->netdev, just pass the netdev when it's
locally defined.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there is a lot of transmit traffic the driver can get into a
situation that the device is starved due to the doorbell never
being rung. This can happen if xmit_more is set constantly
and __netdev_tx_sent_queue() keeps returning false. Fix this
by checking if the queue needs to be stopped right before
calling __netdev_tx_sent_queue(). Use MAX_SKB_FRAGS + 1 as the
stop condition because that's the maximum number of frags
supported for non-TSO transmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver currently calls netdev_tx_completed_queue() for every
Tx completion. However, this API is only meant to be called once
per NAPI if any Tx work is done. Make the necessary changes to
support calling netdev_tx_completed_queue() only once per NAPI.
Also, use the __netdev_tx_sent_queue() API, which supports the
xmit_more functionality.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of napi_consume_skb so that skb recycling
can happen by way of the napi_skb_cache.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Perf was showing some hot spots in ionic_tx_descs_needed()
for TSO traffic. Rework the function to return sooner where
possible.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cut down the number of default Tx and Rx descriptors to save
initial memory requirements.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver attempts to wake the Tx queue
for every descriptor processed. However, this is
overkill and can cause thrashing since Tx xmit can be
running concurrently on a different CPU than Tx clean.
Fix this by refactoring Tx cq servicing into its own
function so the Tx wake code can run after processing
all Tx descriptors.
The driver isn't using the expected memory barriers
to make sure the stop/start bits are coherent. Fix
this by making sure to use the correct memory barriers.
Also, the driver is using the wake API during Tx
xmit even though it's already scheduled. Fix this by
using the start API during Tx xmit.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mptcp/protocol.c
adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket")
9426ce476a70 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/
Adjacent changes:
drivers/dpll/dpll_core.c
0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")
drivers/net/veth.c
1ce7d306ea63 ("veth: try harder when allocating queue memory")
0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
drivers/net/wireless/intel/iwlwifi/mvm/d3.c
8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")
net/wireless/nl80211.c
f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change")
414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.
Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).
Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler. The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time. We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources. This prevents a harmless but disturbing
warning message
resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>
Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since there is a utility available for this, use
the API rather than open code.
Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for using scatter-gather / frags in XDP in both
Rx and Tx paths.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When our ndo_xdp_xmit is called we mark the buffer with
XDP_REDIRECT so we know to return it to the XDP stack for
cleaning.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XDP_REDIRECT packets are given to the XDP stack and
we drop the use of the related page: it will get freed
by the driver that ends up doing the Tx. Because we have
some hardware configurations with limited queue resources,
we use the existing datapath Tx queues rather than creating
and managing a separate set of xdp_tx queues.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XDP_TX packets get fed back into the Rx queue's partnered
Tx queue as an xdp_frame.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an xdp program is loaded, add headroom at the beginning
of the frame to allow for editing and insertions that an XDP
program might need room for, and tailroom used later for XDP
frame tracking. These are only needed in the first Rx buffer
in a packet, not for any trailing frags.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up the basics for running Rx packets through XDP programs.
Add new queue setup and teardown steps for adding/removing an
XDP program, and add the call to run the XDP on a packet.
The XDP frame size needs to be the MTU plus standard ethernet
header, plus head room for XDP scribblings and tail room for a
struct skb_shared_info. Also, at this point, we don't support
XDP frags, only a single contiguous Rx buffer. This means
that our page splitting is not very useful, so when XDP is in
use we need to use the full Rx buffer size and not do sharing.
Co-developed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert Rx datapath handling to use the DMA range APIs
in preparation for adding XDP handling.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These helpers clean up some of the code around DMA mapping
and other buffer references, and will be used in the next
few patches for the XDP support.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We claim to have the AdminQ on our irq0 and thus cpu id 0,
but we need to be sure we set the affinity hint to try to
keep it there.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should be doing as little as possible besides freeing Tx
space when our napi routines are called with budget of 0, so
jump out before doing anything besides Tx cleaning.
See commit afbed3f74830 ("net/mlx5e: do as little as possible in napi poll when budget is 0")
for more info.
Fixes: fe8c30b50835 ("ionic: separate interrupt for Tx and Rx")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240210001307.48450-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set up the pci_error_handlers error_detected and resume to be useful in
handling AER events. If the error detected is pci_channel_io_frozen we
set up to do an FLR at the end of the AER handling - this tends to clear
things up well enough that traffic can continue. Else, let the AER/PCI
machinery do what is needed for the less serious errors seen.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove and restore the lif's debugfs pointers on a reset,
and make sure to check for the dentry before removing it
in case an earlier reset failed to rebuild the lif.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When stopping the watchdog timer at remove time we should
be using the new timer_shutdown_sync to assure the timer
doesn't ever get rearmed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there was a failed attempt to reset the PCI connection,
don't later try to read from PCI as the space is unmapped
and will cause a paging request crash. When clearing the PCI
setup we can clear the dev_info register pointer, and check
it before using it in the fw_running test.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
