| Age | Commit message (Collapse) | Author |
|---|
|
tools/testing/selftests/net/ioam6.sh
7b1700e009cc ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This big patch sprinkles const on local variables and
function arguments which may refer to netdev->dev_addr.
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Some of the changes here are not strictly required - const
is sometimes cast off but pointer is not used for writing.
It seems like it's still better to add the const in case
the code changes later or relevant -W flags get enabled
for the build.
No functional changes.
Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc'.
Eliminate the follow smatch warning:
drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start()
warn: missing error code 'rc'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: d51e4af5c209 ("qed: aRFS infrastructure support")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qed_debug features are updated to support FW version 8.59.1.0 along
with few enhancements.
- Removal of _BB_K2 from register defines.
- Add new condition cond14.
- Add dump of new area sw-platform, epoch, iscsi_task_pages,
fcoe_task_pages, roce_task_pages and eth_task_pages.
- Introduced new functions qed_dbg_phy_size().
- Update in qed_mcp_nvm_rd_cmd() declaration.
- Allow QED to control init/exit at pf level.
- Dump partial "ILT-dump" if buffer size is not sufficient.
This patch also fixes the existing checkpatch warnings and few important
checks.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The qed_mfw_hsi.h contains HSI (Hardware Software Interface) changes
related to management firmware. It has been updated to support new FW
version 8.59.1.0 with below changes.
- New defines for VF bitmap.
- fec_mode and extended_speed defines updated in struct eth_phy_cfg.
- Updated structutres lldp_system_tlvs_buffer_s, public_global,
public_port, public_func, drv_union_data, public_drv_mb
with all dependent new structures.
- Updates in NVM related structures and defines.
- Msg defines are added in enum drv_msg_code and fw_msg_code.
- Updated/added new defines.
This patch also fixes the existing checkpatch warnings and few important
checks.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid calling the qed doorbell recovery - qed_db_rec_handler()
during device recovery.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing the qed module version which is not needed and not allowed
with inbox drivers.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In CMT and NPAR the PF is unknown when the GFS block processes the
packet. Therefore cannot use searcher as it has a per PF database,
and thus ARFS must be disabled.
Fixes: d51e4af5c209 ("qed: aRFS infrastructure support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove forcible recovery trigger and put it as a normal devlink
callback.
This allows user to enable/disable it via
devlink health set pci/0000:03:00.0 reporter fw_fatal auto_recover false
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use devlink_health_report to push error indications.
We implement this in qede via callback function to make it possible
to reuse the same for other drivers sitting on top of qed in future.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we return existing fw & mfw versions, we also fetch device's
serial number:
~$ sudo ~/iproute2/devlink/devlink dev info
pci/0000:01:00.1:
driver qed
board.serial_number REE1915E44552
versions:
running:
fw.app 8.42.2.0
stored:
fw.mgmt 8.52.10.0
MFW and FW are different firmwares on device.
Management is a firmware responsible for link configuration and
various control plane features. Its permanent and resides in NVM.
Running FW (or fastpath FW) is an embedded microprogram implementing
all the packet processing, offloads, etc. This FW is being loaded
on each start by the driver from FW binary blob.
The base device specific structure (qed_dev_info) was not directly
available to the base driver before. Thus, here we create and store
a private copy of this structure in qed_dev root object to
access the data.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devlink instance lifecycle was linked to qed_dev object,
that caused devlink to be recreated on each recovery.
Changing it by making higher level driver (qede) responsible for its
life. This way devlink now survives recoveries.
qede now stores devlink structure pointer as a part of its device
object, devlink private data contains a linkage structure,
qed_devlink.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are extending devlink infrastructure, thus move the existing
stuff into a new file qed_devlink.c
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to
support extended speed and FEC modes.
These new modes are supported by the new boards revisions and newer
MFW versions.
Misc: correct port type for MEDIA_KR.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify and lighten qed_set_link() by declaring static link modes maps
and populating them on module init. This way we save plenty of text size
at the low expense of __ro_after_init and __initconst data (the latter
will be purged after module init is done).
Misc: sanitize exit callback.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These modes are relevant only for several boards, but may be reported by
MFW as well as the others.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add all necessary routines for reading supported FEC modes from NVM and
querying FEC control to the MFW (if the running version supports it).
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently qed driver does not take into consideration transceiver's
capabilities when generating link partner's speed advertisement. This
leads to e.g. incorrect ethtool link info on 10GbaseT modules.
Use transceiver info not only for advertisement and support arrays, but
also for link partner's abilities to fix it.
Misc: fix a couple of comments nearby.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the corresponding advertised and supported link modes according
to the detected transceiver type and device capabilities.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently qed driver already ran out of 32 bits to store link modes,
and this doesn't allow to add and support more speeds.
Convert custom link mode to generic Ethtool bitmap and definitions
(convenient Phylink shorthands are used for elegance and readability).
This allowed us to drop all conversions/mappings between the driver
and Ethtool.
This involves changes in qede and qedf as well, as they used definitions
from shared "qed_if.h".
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mean
we should not care about this.
This commit addresses all parts of the code that were pointed out by sparse
checker. All operations with restricted (__be*/__le*) types are now
protected with explicit from/to CPU conversions, even if they're noops on
common setups.
I'm sure there are more such places, but this implies a deeper code
investigation, and is a subject for future works.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix several sparse warnings by moving structs declarations into
the corresponding header files:
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning:
symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol
'qed_ll2_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol
'qed_ptp_ops_pass' was not declared. Should it be static?
drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning:
symbol 'qed_iov_ops_pass' was not declared. Should it be static?
(some of them were declared twice in different header files)
Also make qed_hw_err_type_descr[] const while at it.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix sparse build warning:
drivers/net/ethernet/qlogic/qed/qed_main.c:2480:6: warning:
symbol 'qed_hw_err_type_descr' was not declared. Should it be static?
Signed-off-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
|
|
On different hardware events we have to respond differently,
on some of hardware indications hw attention (error condition)
should be cleared by the driver to continue normal functioning.
Here we introduce attention clear flags, and put them on some
important events (in aeu_descs).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we introduce qed device error tracking flags and error types.
qed_hw_err_notify is an entrace point to report errors.
It'll notify higher level drivers (qede/qedr/etc) to handle and recover
the error.
List of posible errors comes from hardware interfaces, but could be
extended in future.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch enables the device to send error messages to root port when
an error is detected.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Management firmware (MFW) sends a notification whenever there is a change
in the bandwidth values. Add driver support for sending this notification
to the upper layer drivers (e.g., qedf).
Link: https://lore.kernel.org/r/20200416084314.18851-6-skashyap@marvell.com
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Calling queue_delayed_work concurrently with
destroy_workqueue might race to an unexpected outcome -
scheduled task after wq is destroyed or other resources
(like ptt_pool) are freed (yields NULL pointer dereference).
cancel_delayed_work prevents the race by cancelling
the timer triggered for scheduling a new task.
Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests")
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add to debug dump more information on the platform it was collected
from (pci func, path id).
Provide human readable reg fifo erros.
Removed static debug arrays from HSI Functions, and move them to
the hwfn.
Some structures were slightly changed (removing reserved chip id
for example) which lead to many long initializations being modified
with one parameter less during initialization. This leads to
some long diffs that don't really change anything.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current implementation for nvm_attr configuration instructs the management
FW to load/unload the nvm-cfg image for each user-provided attribute in
the input file. This consumes lot of cycles even for few tens of
attributes.
This patch updates the implementation to perform load/commit of the config
for every 50 attributes. After loading the nvm-image, MFW expects that
config should be committed in a predefined timer value (5 sec), hence it's
not possible to write large number of attributes in a single load/commit
window. Hence performing the commits in chunks.
Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MFW associates the entity id to a config attribute instead of assigning
one entity id for all the config attributes.
This patch incorporates driver changes to link entity id to a config id
attribute.
Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver currently returns max-buf-size as size of the config attribute.
This patch incorporates changes to read this value from MFW (if available)
and provide it to the user. Also did a trivial clean up in this path.
Fixes: d44a3ced7023 ("qede: Add support for reading the config id attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds driver support for configuring the grc dump config flags.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds driver support for reading the config id attributes from NVM
flash partition.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor conflict in r8169, bug fix had two versions in net
and net-next, take the net-next hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to
memory leaks. To fix this issue, introduce the label 'err4' to perform the
cleanup work before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds driver interface for reading the config attributes from user
provided buffer, and updates these values on nvm config flash partition.
This is basically an expansion of our existing ethtool -f implementation.
The management FW has exposed an additional method of configuring some of
the nvram options, and this makes use of that. This implementation will
come into use when newer FW files which contain configuration directives
employing this API will be provided to ethtool -f.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Supported ports in ethtool <eth1> are displayed based on media type.
For media type fibre and twinaxial, port type is "FIBRE". Media type
Base-T is "TP" and media KR is "Backplane".
V1->V2:
Corrected the subject.
Signed-off-by: Rahul Verma <rahulv@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The table currently contains a single parameter for
configuring whether iWARP should be enabled on a 100g
device. Enabling iWARP on a 100g device impacts L2
performance and is therefore not enabled by default.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When initializing status blocks use the affined hwfn
instead of the leading one for RDMA / Storage
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the DORQ (doorbell block) is overflowed, all PFs get attentions at the
same time. If one PF finished handling the attention before another PF even
started, the second PF might miss the DORQ's attention bit and not handle
the attention at all.
If the DORQ attention is missed and the issue is not resolved, another
attention will not be sent, therefore each attention is treated as a
potential DORQ attention.
As a result, the attention callback is called more frequently so the debug
print was moved to reduce its quantity.
The number of periodic doorbell recovery handler schedules was reduced
because it was the previous way to mitigating the missed attention issue.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
