summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic
AgeCommit message (Collapse)Author
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03net/qla3xxx: fix potential memleak in ql_alloc_buffer_queuesDinghao Liu
When dma_alloc_coherent() fails, we should free qdev->lrg_buf to prevent potential memleak. Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12qed: Fix a potential use-after-free in qed_cxt_tables_allocDinghao Liu
qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-10qlcnic: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect fw_info->fw_file_name to be NUL-terminated based on its use within _request_firmware_prepare() wherein `name` refers to it: | if (firmware_request_builtin_buf(firmware, name, dbuf, size)) { | dev_dbg(device, "using built-in %s\n", name); | return 0; /* assigned */ | } ... and with firmware_request_builtin() also via `name`: | if (strcmp(name, b_fw->name) == 0) { There is no evidence that NUL-padding is required. Additionally replace size macro (QLC_FW_FILE_NAME_LEN) with sizeof(fw_info->fw_file_name) to more directly tie the maximum buffer size to the destination buffer: Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-01Merge tag 'asm-generic-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull ia64 removal and asm-generic updates from Arnd Bergmann: - The ia64 architecture gets its well-earned retirement as planned, now that there is one last (mostly) working release that will be maintained as an LTS kernel. - The architecture specific system call tables are updated for the added map_shadow_stack() syscall and to remove references to the long-gone sys_lookup_dcookie() syscall. * tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: hexagon: Remove unusable symbols from the ptrace.h uapi asm-generic: Fix spelling of architecture arch: Reserve map_shadow_stack() syscall number for all architectures syscalls: Cleanup references to sys_lookup_dcookie() Documentation: Drop or replace remaining mentions of IA64 lib/raid6: Drop IA64 support Documentation: Drop IA64 from feature descriptions kernel: Drop IA64 support from sig_fault handlers arch: Remove Itanium (IA-64) architecture
2023-10-20qed: devlink health: use retained error fmsg APIPrzemek Kitszel
Drop unneeded error checking. devlink_fmsg_*() family of functions is now retaining errors, so there is no need to check for them after each call. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-18qede: Refactor qede_forced_speed_maps_init()Paul Greenwalt
Refactor qede_forced_speed_maps_init() to use commen implementation ethtool_forced_speed_maps_init(). The qede driver was compile tested only. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-15qed: fix LL2 RX buffer allocationManish Chopra
Driver allocates the LL2 rx buffers from kmalloc() area to construct the skb using slab_build_skb() The required size allocation seems to have overlooked for accounting both skb_shared_info size and device placement padding bytes which results into the below panic when doing skb_put() for a standard MTU sized frame. skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514 head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566 dev:<NULL> … skb_panic+0x48/0x4a skb_put.cold+0x10/0x10 qed_ll2b_complete_rx_packet+0x14f/0x260 [qed] qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed] qed_ll2_rxq_completion+0xba/0x320 [qed] qed_int_sp_dpc+0x1a7/0x1e0 [qed] This patch fixes this by accouting skb_shared_info and device placement padding size bytes when allocating the buffers. Cc: David S. Miller <davem@davemloft.net> Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-13qed: replace uses of strncpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. This patch eliminates three uses of strncpy(): Firstly, `dest` is expected to be NUL-terminated which is evident by the manual setting of a NUL-byte at size - 1. For this use specifically, strscpy() is a viable replacement due to the fact that it guarantees NUL-termination on the destination buffer. The next two cases should simply be memcpy() as the size of the src string is always 3 and the destination string just wants the first 3 bytes changed. To be clear, there are no buffer overread bugs in the current code as the sizes and offsets are carefully managed such that buffers are NUL-terminated. However, with these changes, the code is now more robust and less ambiguous (and hopefully easier to read). Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-qlogic-qed-qed_debug-c-v2-1-16d2c0162b80@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-03qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_infoGustavo A. R. Silva
The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel
The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-08-23qed/qede: Remove unused declarationsYue Haibing
Commit 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra") removed qede_udp_tunnel_{add,del}() but not the declarations. Commit 0ebcebbef1cc ("qed: Read device port count from the shmem") removed qed_device_num_engines() but not its declaration. Commit 1e128c81290a ("qed: Add support for hardware offloaded FCoE.") declared but never implemented qed_fcoe_set_pf_params(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17qede: fix firmware halt over suspend and resumeManish Chopra
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However this NIC hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware afterwards. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Without this fix device/firmware does not recover unless system is power cycled. Fixes: 2950219d87b0 ("qede: Add basic network device support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15qed: remove unused 'resp_size' calculationArnd Bergmann
Newer versions of clang warn about this variable being assigned but never used: drivers/net/ethernet/qlogic/qed/qed_vf.c:63:67: error: parameter 'resp_size' set but not used [-Werror,-Wunused-but-set-parameter] There is no indication in the git history on how this was ever meant to be used, so just remove the entire calculation and argument passing for it to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230814074512.1067715-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31net: flow_dissector: Use 64bits for used_keysRatheesh Kannoth
As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-29qed: Fix scheduling in a tasklet while getting statsKonstantin Khorenko
Here we've got to a situation when tasklet called usleep_range() in PTT acquire logic, thus welcome to the "scheduling while atomic" BUG(). BUG: scheduling while atomic: swapper/24/0/0x00000100 [<ffffffffb41c6199>] schedule+0x29/0x70 [<ffffffffb41c5512>] schedule_hrtimeout_range_clock+0xb2/0x150 [<ffffffffb41c55c3>] schedule_hrtimeout_range+0x13/0x20 [<ffffffffb41c3bcf>] usleep_range+0x4f/0x70 [<ffffffffc08d3e58>] qed_ptt_acquire+0x38/0x100 [qed] [<ffffffffc08eac48>] _qed_get_vport_stats+0x458/0x580 [qed] [<ffffffffc08ead8c>] qed_get_vport_stats+0x1c/0xd0 [qed] [<ffffffffc08dffd3>] qed_get_protocol_stats+0x93/0x100 [qed] qed_mcp_send_protocol_stats case MFW_DRV_MSG_GET_LAN_STATS: case MFW_DRV_MSG_GET_FCOE_STATS: case MFW_DRV_MSG_GET_ISCSI_STATS: case MFW_DRV_MSG_GET_RDMA_STATS: [<ffffffffc08e36d8>] qed_mcp_handle_events+0x2d8/0x890 [qed] qed_int_assertion qed_int_attentions [<ffffffffc08d9490>] qed_int_sp_dpc+0xa50/0xdc0 [qed] [<ffffffffb3aa7623>] tasklet_action+0x83/0x140 [<ffffffffb41d9125>] __do_softirq+0x125/0x2bb [<ffffffffb41d560c>] call_softirq+0x1c/0x30 [<ffffffffb3a30645>] do_softirq+0x65/0xa0 [<ffffffffb3aa78d5>] irq_exit+0x105/0x110 [<ffffffffb41d8996>] do_IRQ+0x56/0xf0 Fix this by making caller to provide the context whether it could be in atomic context flow or not when getting stats from QED driver. QED driver based on the context provided decide to schedule out or not when acquiring the PTT BAR window. We faced the BUG_ON() while getting vport stats, but according to the code same issue could happen for fcoe and iscsi statistics as well, so fixing them too. Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics.") Fixes: 1e128c81290a ("qed: Add support for hardware offloaded FCoE.") Fixes: 2f2b2614e893 ("qed: Provide iSCSI statistics to management") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Cc: Manish Chopra <manishc@marvell.com> Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-06qed/qede: Fix scheduling while atomicManish Chopra
Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic [ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands - ethtool -C ethx stats-block-usecs <val> ethtool -c ethx Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-23net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-12qlcnic: check pci_reset_function resultDenis Plotnikov
Static code analyzer complains to unchecked return value. The result of pci_reset_function() is unchecked. Despite, the issue is on the FLR supported code path and in that case reset can be done with pcie_flr(), the patch uses less invasive approach by adding the result check of pci_reset_function(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27qed: remove unused num_ooo_add_to_peninsula variableTom Rix
clang with W=1 reports drivers/net/ethernet/qlogic/qed/qed_ll2.c:649:6: error: variable 'num_ooo_add_to_peninsula' set but not used [-Werror,-Wunused-but-set-variable] u32 num_ooo_add_to_peninsula = 0, cid; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230326001733.1343274-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-19qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_infoDaniil Tatianin
We have to make sure that the info returned by the helper is valid before using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Fixes: 733def6a04bf ("qed*: IOV link control") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16qed/qed_mng_tlv: correctly zero out ->min instead of ->hourDaniil Tatianin
This fixes an issue where ->hour would erroneously get zeroed out instead of ->min because of a bad copy paste. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: f240b6882211 ("qed: Add support for processing fcoe tlv request.") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Link: https://lore.kernel.org/r/20230315194618.579286-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13qed/qed_dev: guard against a possible division by zeroDaniil Tatianin
Previously we would divide total_left_rate by zero if num_vports happened to be 1 because non_requested_count is calculated as num_vports - req_count. Guard against this by validating num_vports at the beginning and returning an error otherwise. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-10qede: remove linux/version.h and linux/compiler.hMuhammad Usama Anjum
make versioncheck reports the following: ./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed. ./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed. So remove linux/version.h from both of these files. Also remove linux/compiler.h while at it as it is also not being used. Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08qlcnic: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shahed Shaikh <shshaikh@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08qlcnic: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shahed Shaikh <shshaikh@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: qede: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08qed: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ariel Elior <aelior@marvell.com> Cc: Manish Chopra <manishc@marvell.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08netxen_nic: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Also note that the driver only called these for NX_IS_REVISION_P3 devices, so since f26e58bf6f54, error reporting has been enabled for devices other than NX_IS_REVISION_P3. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Manish Chopra <manishc@marvell.com> Cc: Rahul Verma <rahulv@marvell.com> Cc: GR-Linux-NIC-Dev@marvell.com Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08netxen_nic: Replace fake flex-array with flexible-array memberGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Transform zero-length array into flexible-array member in struct nx_cardrsp_rx_ctx_t. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/265 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-26qede: avoid uninitialized entries in coal_entry arrayMichal Schmidt
Even after commit 908d4bb7c54c ("qede: fix interrupt coalescing configuration"), some entries of the coal_entry array may theoretically be used uninitialized: 1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for coal_entry. The initial allocation uses kcalloc, so everything is initialized. 2. The user sets a small number of queues (ethtool -L). coal_entry is reallocated for the actual small number of queues. 3. The user sets a bigger number of queues. coal_entry is reallocated bigger. The added entries are not necessarily initialized. In practice, the reallocations will actually keep using the originally allocated region of memory, but we should not rely on it. The reallocation is unnecessary. coal_entry can always have QEDE_MAX_RSS_CNT entries. Fixes: 908d4bb7c54c ("qede: fix interrupt coalescing configuration") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Nacked-by: Manish Chopra <manishc@marvell.com> Acked-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Per-next-PR merge. net/smc/af_smc.c b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore") e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()") https://lore.kernel.org/all/20230221124008.6303c330@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20qede: fix interrupt coalescing configurationManish Chopra
On default driver load device gets configured with unexpected higher interrupt coalescing values instead of default expected values as memory allocated from krealloc() is not supposed to be zeroed out and may contain garbage values. Fix this by allocating the memory of required size first with kcalloc() and then use krealloc() to resize and preserve the contents across down/up of the interface. Signed-off-by: Manish Chopra <manishc@marvell.com> Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface") Cc: stable@vger.kernel.org Cc: Bhaskar Upadhaya <bupadhaya@marvell.com> Cc: David S. Miller <davem@davemloft.net> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054 Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27qede: execute xdp_do_flush() before napi_complete_done()Magnus Karlsson
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d1b25b79e162b ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27qed: remove pointless call to devlink_param_driverinit_value_set()Jiri Pirko
devlink_param_driverinit_value_set() call makes sense only for " driverinit" params. However here, the param is "runtime". devlink_param_driverinit_value_set() returns -EOPNOTSUPP in such case and does not do anything. So remove the pointless call to devlink_param_driverinit_value_set() entirely. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-10qed: fix a typo in commentDai Shixin
Fix a typo of "permision" which should be "permission". Signed-off-by: Dai Shixin <dai.shixin@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Link: https://lore.kernel.org/r/202301091935262709751@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-04qed: allow sleep in qed_mcp_trace_dump()Caleb Sander
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop that can run 500K times, so calls to qed_mcp_nvm_rd_cmd() may block the current thread for over 5s. We observed thread scheduling delays over 700ms in production, with stacktraces pointing to this code as the culprit. qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted. It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd(). Add a "can sleep" parameter to qed_find_nvram_image() and qed_nvram_read() so they can sleep during qed_mcp_trace_dump(). qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(), called only by qed_mcp_trace_dump(), allow these functions to sleep. I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep, so keep b_can_sleep set to false when it calls these functions. An example stacktrace from a custom warning we added to the kernel showing a thread that has not scheduled despite long needing resched: [ 2745.362925,17] ------------[ cut here ]------------ [ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0() [ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99 [ 2745.362956,17] Modules linked in: ... [ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x [ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020 [ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20 [ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000 [ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000 [ 2745.363379,17] Call Trace: [ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf [ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0 [ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50 [ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0 [ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0 [ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89 [ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50 [ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40 [ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed] [ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed] [ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed] [ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed] [ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed] [ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed] [ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed] [ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede] [ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190 [ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140 [ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260 [ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0 [ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370 [ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90 [ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710 [ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60 [ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280 [ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220 [ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0 [ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70 [ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79 [ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- Fixes: c965db4446291 ("qed: Add support for debug data collection") Signed-off-by: Caleb Sander <csander@purestorage.com> Acked-by: Alok Prasad <palok@marvell.com> Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-26qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failureDaniil Tatianin
adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-12qlcnic: Clean up some inconsistent indentingJiapeng Chong
No functional modification involved. drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:714 qlcnic_validate_ring_count() warn: inconsistent indenting. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3419 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221212055813.91154-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-05 01:02:51 +0000