summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/rocker/rocker.h
AgeCommit message (Collapse)Author
2015-07-20rocker: add offload_fwd_mark supportScott Feldman
If device flags ingress packet as "fwd offload", mark the skb->offlaod_fwd_mark using the ingress port's dev->offlaod_fwd_mark. This will be the hint to the kernel that this packet has already been forwarded by device to egress ports matching skb->offlaod_fwd_mark. For rocker, derive port dev->offlaod_fwd_mark based on device switch ID and port ifindex. If port is bridged, use the bridge ifindex rather than the port ifindex. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09rocker: add change MTU supportScott Feldman
Implement ndo_change_mtu: on MTU change, reallocate Rx ring bufs and signal HW of new port MTU value. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12rocker: make checkpatch -f cleanScott Feldman
Well almost clean: ignore the CHECKs for space after cast operator and some longer-than-80 char cases where for readability it's better to keep as-is. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rocker: add support for phys_port_nameDavid Ahern
Implement the phys_port_name operation. Port names are pulled from the rocker hardware model in qemu and default to the qemu name + port id. e.g., sw1p1: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 52:54:00:12:35:01 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 where 'sw1' comes from the qemu command line -device rocker,name=sw1, and 'p1' is port 1. Patch is adapted from Scott's phys_port_id patch. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06rocker: sparse: fix dynamic allocation on stack warningScott Feldman
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-26rocker: rename lport to pportScott Feldman
This is just a rename of physical ports from "lport" to "pport". Not a functional change. OF-DPA uses logical ports (lport) for tunnels, but the driver (and device) were using "lport" for physical ports. Renaming physical ports references to "pport", freeing up "lport" for use later with tunnels. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-26rocker: fix non-portable err return codesScott Feldman
The rocker device returns error codes if something goes wrong with descriptor processing. Originally the device used standard errno codes for different errors, but since those errno codes aren't portable across ARCHs, the device now returns hard-coded error codes that stay constant across diff ARCHs. Fix driver to use those same hard-coded values. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01net: rocker: Add support for retrieving port level statisticsDavid Ahern
Add support for retrieving port level statistics from device. Hook is added for ethtool's stats functionality. For example, $ ethtool -S eth3 NIC statistics: rx_packets: 12 rx_bytes: 2790 rx_dropped: 0 rx_errors: 0 tx_packets: 8 tx_bytes: 728 tx_dropped: 0 tx_errors: 0 Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02rocker: add ndo_bridge_setlink/getlink support for learning policyScott Feldman
Rocker ports will use new "swdev" hwmode for bridge port offload policy. Current supported policy settings are BR_LEARNING and BR_LEARNING_SYNC. User can turn on/off device port FDB learning and syncing to bridge. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02rocker: introduce rocker switch driverJiri Pirko
This patch introduces the first driver to benefit from the switchdev infrastructure and to implement newly introduced switch ndos. This is a driver for emulated switch chip implemented in qemu: https://github.com/sfeldma/qemu-rocker/ This patch is a result of joint work with Scott Feldman. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>