summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/smsc/smsc911x.c
AgeCommit message (Collapse)Author
2020-05-23net: smsc911x: Fix runtime PM imbalance on errorDinghao Liu
Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26net: smsc: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for MACs which support asym pauseAndrew Lunn
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Fix up drivers masking pause supportAndrew Lunn
PHY drivers don't indicate they support pause. They expect MAC drivers to enable its support if the MAC has the needed hardware. Thus MAC drivers should not mask Pause support, but enable it. Change a few ANDs to ORs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use phy_set_max_speed() to limit advertised speedAndrew Lunn
Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07net: smsc911x: Fix unload crash when link is upJeremy Linton
The smsc911x driver will crash if it is rmmod'ed while the netdev is up like: Call trace: phy_detach+0x94/0x150 phy_disconnect+0x40/0x50 smsc911x_stop+0x104/0x128 [smsc911x] __dev_close_many+0xb4/0x138 dev_close_many+0xbc/0x190 rollback_registered_many+0x140/0x460 rollback_registered+0x68/0xb0 unregister_netdevice_queue+0x100/0x118 unregister_netdev+0x28/0x38 smsc911x_drv_remove+0x58/0x130 [smsc911x] platform_drv_remove+0x30/0x50 device_release_driver_internal+0x15c/0x1f8 driver_detach+0x54/0x98 bus_remove_driver+0x64/0xe8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 smsc911x_cleanup_module+0x14/0xbca8 [smsc911x] SyS_delete_module+0x1e8/0x238 __sys_trace_return+0x0/0x4 This is caused by the mdiobus being unregistered/free'd and the code in phy_detach() attempting to manipulate mdio related structures from unregister_netdev() calling close() To fix this, we delay the mdiobus teardown until after the netdev is deregistered. Reported-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: smsc911x: Quieten netif during suspendGeert Uytterhoeven
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12smsc911x: Add check for ioremap_nocache() return codeAlexey Khoroshilov
There is no check for return code of smsc911x_drv_probe() in smsc911x_drv_probe(). The patch adds one. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03smsc911x: Adding support for Micochip LAN9250 Ethernet controllerDavid Cai
Adding support for Microchip LAN9250 Ethernet controller. Signed-off-by: David Cai <david.cai@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-13Merge tag 'pm-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "Again, cpufreq gets more changes than the other parts this time (one new driver, one old driver less, a bunch of enhancements of the existing code, new CPU IDs, fixes, cleanups) There also are some changes in cpuidle (idle injection rework, a couple of new CPU IDs, online/offline rework in intel_idle, fixes and cleanups), in the generic power domains framework (mostly related to supporting power domains containing CPUs), and in the Operating Performance Points (OPP) library (mostly related to supporting devices with multiple voltage regulators) In addition to that, the system sleep state selection interface is modified to make it easier for distributions with unchanged user space to support suspend-to-idle as the default system suspend method, some issues are fixed in the PM core, the latency tolerance PM QoS framework is improved a bit, the Intel RAPL power capping driver is cleaned up and there are some fixes and cleanups in the devfreq subsystem Specifics: - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding for it (Markus Mayer) - Support for ARM Integrator/AP and Integrator/CP in the generic DT cpufreq driver and elimination of the old Integrator cpufreq driver (Linus Walleij) - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier, and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie, Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik) - cpufreq core fix to eliminate races that may lead to using inactive policy objects and related cleanups (Rafael Wysocki) - cpufreq schedutil governor update to make it use SCHED_FIFO kernel threads (instead of regular workqueues) for doing delayed work (to reduce the response latency in some cases) and related cleanups (Viresh Kumar) - New cpufreq sysfs attribute for resetting statistics (Markus Mayer) - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis, Viresh Kumar) - Support for using generic cpufreq governors in the intel_pstate driver (Rafael Wysocki) - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy Performance Preference/Energy Performance Bias) knobs in the intel_pstate driver (Srinivas Pandruvada) - New CPU ID for Knights Mill in intel_pstate (Piotr Luc) - intel_pstate driver modification to use the P-state selection algorithm based on CPU load on platforms with the system profile in the ACPI tables set to "mobile" (Srinivas Pandruvada) - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki, Srinivas Pandruvada) - cpufreq powernv driver updates including fast switching support (for the schedutil governor), fixes and cleanus (Akshay Adiga, Andrew Donnellan, Denis Kirjanov) - acpi-cpufreq driver rework to switch it over to the new CPU offline/online state machine (Sebastian Andrzej Siewior) - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth Prakash) - Idle injection rework (to make it use the regular idle path instead of a home-grown custom one) and related powerclamp thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej Siewior) - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy Shevchenko, Piotr Luc) - intel_idle driver cleanups and switch over to using the new CPU offline/online state machine (Anna-Maria Gleixner, Sebastian Andrzej Siewior) - cpuidle DT driver update to support suspend-to-idle properly (Sudeep Holla) - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian, Rafael Wysocki) - Preliminary support for power domains including CPUs in the generic power domains (genpd) framework and related DT bindings (Lina Iyer) - Assorted fixes and cleanups in the generic power domains (genpd) framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven) - Preliminary support for devices with multiple voltage regulators and related fixes and cleanups in the Operating Performance Points (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd) - System sleep state selection interface rework to make it easier to support suspend-to-idle as the default system suspend method (Rafael Wysocki) - PM core fixes and cleanups, mostly related to the interactions between the system suspend and runtime PM frameworks (Ulf Hansson, Sahitya Tummala, Tony Lindgren) - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski) - New Knights Mill CPU ID for the Intel RAPL power capping driver (Piotr Luc) - Intel RAPL power capping driver fixes, cleanups and switch over to using the new CPU offline/online state machine (Jacob Pan, Thomas Gleixner, Sebastian Andrzej Siewior) - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc, rockchip-dfi devfreq drivers and the devfreq core (Axel Lin, Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar) - Fix for false-positive KASAN warnings during resume from ACPI S3 (suspend-to-RAM) on x86 (Josh Poimboeuf) - Memory map verification during resume from hibernation on x86 to ensure a consistent address space layout (Chen Yu) - Wakeup sources debugging enhancement (Xing Wei) - rockchip-io AVS driver cleanup (Shawn Lin)" * tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits) devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks devfreq: rk3399_dmc: Remove dangling rcu_read_unlock() devfreq: exynos: Don't use OPP structures outside of RCU locks Documentation: intel_pstate: Document HWP energy/performance hints cpufreq: intel_pstate: Support for energy performance hints with HWP cpufreq: intel_pstate: Add locking around HWP requests PM / sleep: Print active wakeup sources when blocking on wakeup_count reads PM / core: Fix bug in the error handling of async suspend PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend PM / Domains: Fix compatible for domain idle state PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators() PM / OPP: Allow platform specific custom set_opp() callbacks PM / OPP: Separate out _generic_set_opp() PM / OPP: Add infrastructure to manage multiple regulators PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() PM / OPP: Manage supply's voltage/current in a separate structure PM / OPP: Don't use OPP structure outside of rcu protected section PM / OPP: Reword binding supporting multiple regulators per device PM / OPP: Fix incorrect cpu-supply property in binding cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state() ..
2016-12-12Merge branches 'pm-core', 'pm-qos' and 'pm-avs'Rafael J. Wysocki
* pm-core: PM / core: Fix bug in the error handling of async suspend PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend PM / Runtime: Defer resuming of the device in pm_runtime_force_resume() PM / Runtime: Don't allow to suspend a device with an active child net: smsc911x: Synchronize the runtime PM status during system suspend PM / Runtime: Convert pm_runtime_set_suspended() to return an int PM / Runtime: Clarify comment in rpm_resume() when resuming the parent PM / Runtime: Remove the exported function pm_children_suspended() * pm-qos: PM / QoS: Export dev_pm_qos_update_user_latency_tolerance PM / QoS: Fix writing 'auto' to pm_qos_latency_tolerance_us PM / QoS: Improve sysfs pm_qos_latency_tolerance validation * pm-avs: PM / AVS: rockchip-io: make the log more consistent
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-12-09net: smsc911x: back out silently on probe deferralsLinus Walleij
When trying to get a regulator we may get deferred and we see this noise: smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized): couldn't get regulators -517 Then the driver continues anyway. Which means that the regulator may not be properly retrieved and reference counted, and may be switched off in case noone else is using it. Fix this by returning silently on deferred probe and let the system work it out. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: smsc911x: Utilize phy_ethtool_nway_resetFlorian Fainelli
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09net: smsc911x: Synchronize the runtime PM status during system suspendUlf Hansson
The smsc911c driver puts its device into low power state when entering system suspend. Although it doesn't update the device's runtime PM status to RPM_SUSPENDED, which causes problems for a parent device. In particular, when the runtime PM status of the parent is requested to be updated to RPM_SUSPENDED, the runtime PM core prevent this, because it's forbidden to runtime suspend a device, which has an active child. Fix this by updating the runtime PM status of the smsc911x device to RPM_SUSPENDED during system suspend. In system resume, let's reverse that action by runtime resuming the device and thus also the parent. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07net: smsc911x: request and deassert optional RESET GPIOLinus Walleij
On some systems (such as the Qualcomm APQ8060 Dragonboard) the RESET signal of the SMSC911x is not pulled up by a resistor (or the internal pull-up that will pull it up if the pin is not even connected) but instead connected to a GPIO line, so that the operating system must explicitly deassert RESET before use. Support this in the SMSC911x driver so this ethernet connector can be used on such targets. Notice that we request the line to go logical low (deassert) whilst the line on the actual component is active low. This is managed in the respective hardware description when specifying the GPIO line with e.g. device tree or ACPI. With device tree it looks like this in one case: reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; Which means that logically requesting the RESET line to be deasserted will result in the line being driven high, taking the device out of reset. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: smsc911x: Move interrupt allocation to open/stopJeremy Linton
The /proc/irq/xx information is incorrect for smsc911x because the request_irq is happening before the register_netdev has the proper device name. Moving it to the open also fixes the case of when the device is renamed. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: smsc911x: Move interrupt handler before openJeremy Linton
In preparation for the allocating/enabling interrupts in the ndo_open routine move the irq handler before it. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: smsc911x: Fix register_netdev, phy startup, driver unload orderingJeremy Linton
Move phy startup/shutdown into the smsc911x_open/stop routines. This allows the module to be unloaded because phy_connect_direct is no longer always holding the module use count. This one change also resolves a number of other problems. The link status of a downed interface no longer reflects a stale state. Errors caused by the net device being opened before the mdio/phy was configured. There is also a potential power savings as the phy's don't remain powered when the interface isn't running. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: smsc911x: Remove multiple exit points from smsc911x_openJeremy Linton
Rework the error handling in smsc911x open in preparation for the mdio startup being moved here. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: smsc: smsc911x: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: smsc: smsc911x: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27net: smsc911x: Fix bug where PHY interrupts are overwritten by 0Jeremy Linton
By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16net: smsc911x: Reset PHY during initializationPavel Fedin
On certain hardware after software reboot the chip may get stuck and fail to reinitialize during reset. This can be fixed by ensuring that PHY is reset too. Old PHY resetting method required operational MDIO interface, therefore the chip should have been already set up. In order to be able to function during probe, it is changed to use PMT_CTRL register. The problem could be observed on SMDK5410 board. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01net: smsc911x: Fix crash if loopback test failsPavel Fedin
On certain hardware in certain situations loopback test fails and the driver gets removed. During mdiobus_unregister() instance of PHY driver gets disposed. But by this time it has already been started using phy_connect_direct(). PHY driver uses DELAYED_WORK in order to maintain its state. Attempting to dispose the driver without calling phy_disconnect() causes deallocation of DELAYED_WORK being active. This shortly causes a bad crash in timer code. The problem can be discovered by enabling CONFIG_DEBUG_OBJECTS_TIMERS and CONFIG_DEBUG_OBJECTS_FREE Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-08-29net/smsc911x: Fix deferred probe for interruptTony Lindgren
The interrupt handler may not be available when smsc911x probes if the interrupt handler is a GPIO controller for example. Let's fix that by adding handling for -EPROBE_DEFER. Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27smsc911x: Ignore error return from device_get_phy_mode()Guenter Roeck
Commit 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used") introduces an error check for the return value from device_get_phy_mode() and bails out if there is an error. Unfortunately, there are configurations where no phy is configured. Those configurations now fail. To fix the problem, accept error returns from device_get_phy_mode(), and use the return value from device_property_read_u32() to determine if there is a suitable firmware interface to read the configuration. Fixes: 62ee783bf1f8 ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used") Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20smsc911x: Remove dev==NULL check.Jeremy Linton
The dev==NULL check in smsc911x_probe_config is useless and isn't providing any additional protection. If a fwnode doesn't exist then an appropriate error should be returned by device_get_phy_mode() covering the original case of a missing of/fwnode. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17smsc911x: Fix crash seen if neither ACPI nor OF is configured or usedGuenter Roeck
Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes the call to smsc911x_probe_config() unconditional, and no longer fails if there is no device node. device_get_phy_mode() is called unconditionally, and if there is no phy node configured returns an error code. This error code is assigned to phy_interface, and interpreted elsewhere in the code as valid phy mode. This in turn causes qemu to crash when running a variant of realview_pb_defconfig. qemu: hardware error: lan9118_read: Bad reg 0x86 Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") Cc: Jeremy Linton <jeremy.linton@arm.com> Cc Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Convert smsc911x to use ACPI as well as DTJeremy Linton
Add ACPI bindings for the smsc911x driver. Convert the DT specific calls to nonspecific device* calls, This allows the driver to work with both ACPI and DT configurations. Ethernet should now work when using ACPI on ARM Juno. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04net/smsc911x: fix irq resource allocation failureKamlakant Patel
When smsc911x uses GPIO as the interrupt controller, and if both are loaded as modules, we get following error: "smsc911x: Could not allocate irq resource" This issue is because of smsc911x using platform_get_resource to get device tree based irq resource. commit "9ec36ca (of/irq: do irq resolution in platform_get_irq)" and commit "7085a7 (drivers: platform: parse IRQ flags from resources)" add support in platform_get_irq to resolve irq and irq_flags respectively for both modern device tree and legacy static platform data platforms. Modify smsc911x driver to use platform_get_irq to pick up irq resource correctly and use irq_get_trigger_type to get the IRQ trigger flags. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03ethernet: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-24net/smsc911x: Add minimal runtime PM supportGeert Uytterhoeven
Add minimal runtime PM support (enable on probe, disable on remove), to ensure proper operation with a parent device that uses runtime PM. This is needed on systems where the external bus controller module of the SoC is contained in a PM domain and/or has a gateable functional clock. In such cases, before accessing any device connected to the external bus, the PM domain must be powered up, and/or the functional clock must be enabled, which is typically handled through runtime PM by the bus controller driver. An example of this is the kzm9g development board, where an smsc9220 Ethernet controller is connected to the Bus State Controller (BSC) of a Renesas sh73a0 SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13smsc911x: power-up phydev before doing a software reset.Enric Balletbo i Serra
With commit be9dad1f9f26604fb ("net: phy: suspend phydev when going to HALTED"), the PHY device will be put in a low-power mode using BMCR_PDOWN if the the interface is set down. The smsc911x driver does a software_reset opening the device driver (ndo_open). In such case, the PHY must be powered-up before access to any register and before calling the software_reset function. Otherwise, as the PHY is powered down the software reset fails and the interface can not be enabled again. This patch fixes this scenario that is easy to reproduce setting down the network interface and setting up again. $ ifconfig eth0 down $ ifconfig eth0 up ifconfig: SIOCSIFFLAGS: Input/output error Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net/smsc911x: Fix delays in the PHY enable/disable routinesAlexander Kochetkov
Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms). Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms). The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). I saw problems with soft reset due to wrong udelay timings. After I fixed udelay, I measured the time needed to bring integrated PHY from power-down to operational mode (the time beetween clearing EDPWRDOWN bit and soft reset complete event). I got 1ms (measured using ktime_get). The value is equal to the current value (1ms) used in the smsc911x_phy_disable_energy_detect. It is near the upper bound and in order to avoid rare soft reset faults it is doubled (2ms). I don't know official timing for bringing up integrated PHY as specs doesn't clarify this (or may be I didn't found). It looks safe to drop delays before and after setting EDPWRDOWN bit (enable PHY power-down mode). I didn't saw any regressions with the patch. The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down modeAlexander Kochetkov
The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221). It is possible that PHY could enter power-down mode (ENERGYON clear), between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST bit set in smsc911x_soft_reset. This could happen, for example, if someone disconnect ethernet cable between the checks. The PHY in a power-down mode would prevent the MAC portion of chip to be software reseted. Initially found by code review, confirmed later using test case. This is low probability issue, and in order to reproduce it you have to run the script: while true; do ifconfig eth0 down ifconfig eth0 up || break done While the script is running you have to plug/unplug ethernet cable many times (using gpio controlled ethernet switch, for example) until get: [ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336 [ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig: SIOCSIFFLAGS: Input/output error The patch was reviewed by Steve Glendinning and Microchip Team. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Acked-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: ethernet: smsc: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>