summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
AgeCommit message (Collapse)Author
2019-09-05net: stmmac: Correctly assing MAX MTU in XGMAC cores caseJose Abreu
Maximum MTU for XGMAC cores is 16k thus the check for presence of XGMAC shall be done first in order to assign correct value. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Only consider RX error when HW Timestamping is not enabledJose Abreu
Only consider that we have an error when HW Timestamping is not enabled as this can give false positives due to the fact the RX Timestamping in XGMAC and GMAC cores comes from context descriptors. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Implement L3/L4 Filters using TC FlowerJose Abreu
Implement filters for Layer 3 and Layer 4 using TC Flower API. Add the corresponding callbacks in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22ethernet: Delete unnecessary checks before the macro call “dev_kfree_skb”Markus Elfring
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add support for VLAN Insertion OffloadJose Abreu
Adds the logic to insert a given VLAN ID in a packet. This is offloaded to HW and its descriptor based. For now, only XGMAC implements the necessary callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add support for SA Insertion/Replacement in XGMAC coresJose Abreu
Add the support for Source Address Insertion and Replacement in XGMAC cores. Two methods are supported: Descriptor based and register based. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add a counter for Split Header packetsJose Abreu
Add a counter that increments each time a packet with split header is received. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add Split Header support and enable it in XGMAC coresJose Abreu
Add the support for Split Header feature in the RX path and enable it in XGMAC cores. This does not impact neither beneficts bandwidth but it does reduces CPU usage because without the feature all the entire packet is memcpy'ed, while that with the feature only the header is. With Split Header disabled 'perf stat -d' gives: 86870.624945 task-clock (msec) # 0.429 CPUs utilized 1073352 context-switches # 0.012 M/sec 1 cpu-migrations # 0.000 K/sec 213 page-faults # 0.002 K/sec 327113872376 cycles # 3.766 GHz (62.53%) 56618161216 instructions # 0.17 insn per cycle (75.06%) 10742205071 branches # 123.658 M/sec (75.36%) 584309242 branch-misses # 5.44% of all branches (75.19%) 17594787965 L1-dcache-loads # 202.540 M/sec (74.88%) 4003773131 L1-dcache-load-misses # 22.76% of all L1-dcache hits (74.89%) 1313301468 LLC-loads # 15.118 M/sec (49.75%) 355906510 LLC-load-misses # 27.10% of all LL-cache hits (49.92%) With Split Header enabled 'perf stat -d' gives: 49324.456539 task-clock (msec) # 0.245 CPUs utilized 2542387 context-switches # 0.052 M/sec 1 cpu-migrations # 0.000 K/sec 213 page-faults # 0.004 K/sec 177092791469 cycles # 3.590 GHz (62.30%) 68555756017 instructions # 0.39 insn per cycle (75.16%) 12697019382 branches # 257.418 M/sec (74.81%) 442081897 branch-misses # 3.48% of all branches (74.79%) 20337958358 L1-dcache-loads # 412.330 M/sec (75.46%) 3820210140 L1-dcache-load-misses # 18.78% of all L1-dcache hits (75.35%) 1257719198 LLC-loads # 25.499 M/sec (49.73%) 685543923 LLC-load-misses # 54.51% of all LL-cache hits (49.86%) Changes from v2: - Reword commit message (Jakub) Changes from v1: - Add performance info (David) - Add misssing dma_sync_single_for_device() Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Prepare to add Split Header supportJose Abreu
In order to add Split Header support, stmmac_rx() needs to take into account that packet may be split accross multiple descriptors. Refactor the logic of this function in order to support this scenario. Changes from v2: - Fixup if condition detection (Jakub) - Don't stop NAPI with unfinished packet (Jakub) - Use napi_alloc_skb() (Jakub) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Get correct timestamp values from XGMACJose Abreu
TX Timestamp in XGMAC comes from MAC instead of descriptors. Implement this in a new callback. Also, RX Timestamp in XGMAC must be cheked against corruption and we need a barrier to make sure that descriptor fields are read correctly. Changes from v2: - Rework return code check (Jakub) Changes from v1: - Rework the get timestamp function (David) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-10stmmac: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't care about the individual files, we can remove the stored dentry for the files, as they are not needed to be kept track of at all. Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement VLAN Hash Filtering in XGMACJose Abreu
Implement the VLAN Hash Filtering feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement RSS and enable it in XGMAC coreJose Abreu
Implement the RSS functionality and add the corresponding callbacks in XGMAC core. Changes from v1: - Do not use magic constants (Jakub) - Use ethtool_rxfh_indir_default() (Jakub) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31net: stmmac: Use netif_tx_napi_add() for TX polling functionFrode Isaksen
This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: stmmac: Sync RX Buffer upon allocationJose Abreu
With recent changes that introduced support for Page Pool in stmmac, Jon reported that NFS boot was no longer working on an ARM64 based platform that had the IP behind an IOMMU. As Page Pool API does not guarantee DMA syncing because of the use of DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon re-allocation because we are always re-using same pages. In fact, ARM64 code invalidates the DMA area upon two situations [1]: - sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE - sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE So, as we must invalidate both the current RX buffer and the newly allocated buffer we propose this fix. [1] arch/arm64/mm/cache.S Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Do not cut down 1G modesJose Abreu
Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman <megi@xff.cz> Tested-by: Ondrej Jirman <megi@xff.cz> Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: Use kcalloc() instead of kmalloc_array()Jose Abreu
We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: stmmac: RX Descriptors need to be clean before setting buffersJose Abreu
RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09drivers: net: use flow block APIPablo Neira Ayuso
This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: add flow_block_cb_setup_simple()Pablo Neira Ayuso
Most drivers do the same thing to set up the flow block callbacks, this patch adds a helper function to do this. This preparation patch reduces the number of changes to adapt the existing drivers to use the flow block callback API. This new helper function takes a flow block list per-driver, which is set to NULL until this driver list is used. This patch also introduces the flow_block_command and flow_block_binder_type enumerations, which are renamed to use FLOW_BLOCK_* in follow up patches. There are three definitions (aliases) in order to reduce the number of updates in this patch, which go away once drivers are fully adapted to use this flow block API. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: add support for hash table size 128/256 in dwmac4Biao Huang
1. get hash table size in hw feature reigster, and add support for taller hash table(128/256) in dwmac4. 2. only clear GMAC_PACKET_FILTER bits used in this function, to avoid side effect to functions of other bits. stmmac selftests output log with flow control on: ethtool -t eth0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters 0 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: Introducing support for Page PoolJose Abreu
Mapping and unmapping DMA region is an high bottleneck in stmmac driver, specially in the RX path. This commit introduces support for Page Pool API and uses it in all RX queues. With this change, we get more stable troughput and some increase of banwidth with iperf: - MAC1000 - 950 Mbps - XGMAC: 9.22 Gbps Changes from v3: - Use page_pool_destroy() (Ilias) Changes from v2: - Uncoditionally call page_pool_free() (Jesper) Changes from v1: - Use page_pool_get_dma_addr() (Jesper) - Add a comment (Jesper) - Add page_pool_free() call (Jesper) - Reintroduce sync_single_for_device (Arnd / Ilias) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: Implement RX Coalesce Frames settingJose Abreu
Add support for coalescing RX path by specifying number of frames which don't need to have interrupt on completion bit set. This is only available when RX Watchdog is enabled. Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: stmmac: Re-work the queue selection for TSO packetsJose Abreu
Ben Hutchings says: "This is the wrong place to change the queue mapping. stmmac_xmit() is called with a specific TX queue locked, and accessing a different TX queue results in a data race for all of that queue's state. I think this commit should be reverted upstream and in all stable branches. Instead, the driver should implement the ndo_select_queue operation and override the queue mapping there." Fixes: c5acdbee22a1 ("net: stmmac: Send TSO packets always from Queue 0") Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Only disable interrupts if NAPI is scheduledJose Abreu
Only disable the interrupts if RX NAPI gets to be scheduled. Also, schedule the TX NAPI only when the interrupts are disabled. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Update RX Tail Pointer to last free entryJose Abreu
Update the RX Tail Pointer to the last available SKB entry. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Enable support for > 32 Bits addressing in XGMACJose Abreu
Currently, stmmac only supports 32 bits addressing for SKB. Enable the support for upto 48 bits addressing in XGMAC core. This avoids the use of bounce buffers and increases performance. Changes from v1: - Fallback to 32 bits in failure (Andrew) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Do not disable interrupts when cleaning TXJose Abreu
This is a performance killer and anyways the interrupts are being disabled by RX NAPI so no need to disable them again. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Add the missing speeds that XGMAC supportsJose Abreu
XGMAC supports following speeds: - 10G XGMII - 5G XGMII - 2.5G XGMII - 2.5G GMII - 1G GMII - 100M MII - 10M MII Add them to the stmmac driver. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Decrease default RX Watchdog valueJose Abreu
For performance reasons decrease the default RX Watchdog value for the minimum allowed. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Do not try to enable PHY EEE if MAC does not support itJose Abreu
Do not enable EEE feature in the PHY if MAC does not support it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: stmmac: Fix case when PHY handle is not presentJose Abreu
Some DT bindings do not have the PHY handle. Let's fallback to manually discovery in case phylink_of_phy_connect() fails. Changes from v1: - Fixup comment style (Sergei) Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: stmmac: Fix crash observed if PHY does not support EEEJon Hunter
If the PHY does not support EEE mode, then a crash is observed when the ethernet interface is enabled. The crash occurs, because if the PHY does not support EEE, then although the EEE timer is never configured, it is still marked as enabled and so the stmmac ethernet driver is still trying to update the timer by calling mod_timer(). This triggers a BUG() in the mod_timer() because we are trying to update a timer when there is no callback function set because timer_setup() was never called for this timer. The problem is caused because we return true from the function stmmac_eee_init(), marking the EEE timer as enabled, even when we have not configured the EEE timer. Fix this by ensuring that we return false if the PHY does not support EEE and hence, 'eee_active' is not set. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: stmmac: Fix possible deadlock when disabling EEE supportJon Hunter
When stmmac_eee_init() is called to disable EEE support, then the timer for EEE support is stopped and we return from the function. Prior to stopping the timer, a mutex was acquired but in this case it is never released and so could cause a deadlock. Fix this by releasing the mutex prior to returning from stmmax_eee_init() when stopping the EEE timer. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22net: stmmac: set IC bit when transmitting frames with HW timestampRoland Hii
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit hardware timestamp. The polling will most likely timeout if the tx coalesce is enabled due to the Interrupt-on-Completion (IC) bit is not set in tx descriptor for those frames. This patch will ignore the tx coalesce parameter and set the IC bit when transmitting PTP frames which need to report out the frame transmit hardware timestamp to user space. Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <roland.king.guan.hii@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17net: stmmac: fix unused-variable warningArnd Bergmann
When building without CONFIG_OF, we get a harmless build warning: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_phy_setup': drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:973:22: error: unused variable 'node' [-Werror=unused-variable] struct device_node *node = priv->plat->phy_node; Reword it so we always use the local variable, by making it the fwnode pointer instead of the device_node. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15net: stmmac: Fix wrapper drivers not detecting PHYJose Abreu
Because of PHYLINK conversion we stopped parsing the phy-handle property from DT. Unfortunatelly, some wrapper drivers still rely on this phy node to configure the PHY. Let's restore the parsing of PHY handle while these wrapper drivers are not fully converted to PHYLINK. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13net: stmmac: Convert to phylink and remove phylib logicJose Abreu
Convert everything to phylink. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13net: stmmac: Start adding phylink supportJose Abreu
Start adding the phylink callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13net: stmmac: Prepare to convert to phylinkJose Abreu
In preparation for the convertion, split the adjust_link function into mac_config and add the mac_link_up and mac_link_down functions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope [that] it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 57 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: stmmac: Switch to devm_alloc_etherdev_mqsJisheng Zhang
Make use of devm_alloc_etherdev_mqs() to simplify the code. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29net: stmmac: use dev_info() before netdev is registeredJisheng Zhang
Before the netdev is registered, calling netdev_info() will emit something as "(unnamed net device) (uninitialized)", looks confusing. Before this patch: [ 3.155028] stmmaceth f7b60000.ethernet (unnamed net_device) (uninitialized): device MAC address 52:1a:55:18:9e:9d After this patch: [ 3.155028] stmmaceth f7b60000.ethernet: device MAC address 52:1a:55:18:9e:9d Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-25net: stmmac: fix csr_clk can't be zero issueBiao Huang
The specific clk_csr value can be zero, and stmmac_clk is necessary for MDC clock which can be set dynamically. So, change the condition from plat->clk_csr to plat->stmmac_clk to fix clk_csr can't be zero issue. Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-25net: stmmac: update rx tail pointer register to fix rx dma hang issue.Biao Huang
Currently we will not update the receive descriptor tail pointer in stmmac_rx_refill. Rx dma will think no available descriptors and stop once received packets exceed DMA_RX_SIZE, so that the rx only test will fail. Update the receive tail pointer in stmmac_rx_refill to add more descriptors to the rx channel, so packets can be received continually Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24net: stmmac: Prevent missing interrupts when running NAPIJose Abreu
When we trigger NAPI we are disabling interrupts but in case we receive or send a packet in the meantime, as interrupts are disabled, we will miss this event. Trigger both NAPI instances (RX and TX) when at least one event happens so that we don't miss any interrupts. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-01 21:45:21 +0000