summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro
AgeCommit message (Collapse)Author
2022-02-03net: stmmac: ensure PTP time register reads are consistentYannick Vignon
Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: stmmac: dump gmac4 DMA registers correctlyCamel Guo
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-28net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()Jisheng Zhang
There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected ↵Yuji Ishikawa
speed request. Variable clk_sel_val is not initialized in the default case of the first switch statement. In that case, the function should return immediately without any changes to the hardware. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()Jisheng Zhang
When readl_poll_timeout() timeout, we'd better directly use its return value. Before this patch: [ 2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14 After this patch: [ 2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110 Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: stmmac: skip only stmmac_ptp_register when resume from suspendMohammad Athari Bin Ismail
When resume from suspend, besides skipping PTP registration, it also skipping PTP HW initialization. This could cause PTP clock not able to operate properly when resume from suspend. To fix this, only stmmac_ptp_register() is skipped when resume from suspend. Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: stmmac: configure PTP clock source prior to PTP initializationMohammad Athari Bin Ismail
For Intel platform, it is required to configure PTP clock source prior PTP initialization in MAC. So, need to move ptp_clk_freq_config execution from stmmac_ptp_register() to stmmac_init_ptp(). Fixes: 76da35dc99af ("stmmac: intel: Add PSE and PCH PTP clock source selection") Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-25net: stmmac: reduce unnecessary wakeups from eee sw timerJisheng Zhang
Currently, on EEE capable platforms, if EEE SW timer is used, the SW timer cause 1 wakeup/s even if the TX has successfully entered EEE. Remove this unnecessary wakeup by only calling mod_timer() if we haven't successfully entered EEE. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24net: stmmac: remove unused members in struct stmmac_privJisheng Zhang
The tx_coalesce and mii_irq are not used at all now, so remove them. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-20net: stmmac: dwmac-visconti: Fix clock configuration for RMII modeYuji Ishikawa
Bit pattern of the ETHER_CLOCK_SEL register for RMII/MII mode should be fixed. Also, some control bits should be modified with a specific sequence. Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-20net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SELYuji Ishikawa
just 0 should be used to represent cleared bits * ETHER_CLK_SEL_DIV_SEL_20 * ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN * ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN * ETHER_CLK_SEL_TX_CLK_O_TX_I * ETHER_CLK_SEL_RMII_CLK_SEL_IN Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-14net: stmmac: Fix "Unbalanced pm_runtime_enable!" warningKai-Heng Feng
If the device is PCI based like intel-eth-pci, pm_runtime_enable() is already called by pci_pm_init(). So only pm_runtime_enable() when it's not already enabled. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-12net: stmmac: dwmac-oxnas: Add support for OX810SENeil Armstrong
Add support for OX810SE dwmac glue setup, which is a simplified version of the OX820 introduced later with more control on the PHY interface. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Add includes masked by netdevice.h including uapi/bpf.hJakub Kicinski
Add missing includes unmasked by the subsequent change. Mostly network drivers missing an include for XDP_PACKET_HEADROOM. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211230012742.770642-2-kuba@kernel.org
2021-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5MNobuhiro Iwamatsu
ETHER_CLK_SEL_FREQ_SEL_2P5M is not 0 bit of the register. This is a value, which is 0. Fix from BIT(0) to 0. Reported-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211223073633.101306-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: stmmac: ptp: fix potentially overflowing expressionXiaoliang Yang
Convert the u32 variable to type u64 in a context where expression of type u64 is required to avoid potential overflow. Fixes: e9e3720002f6 ("net: stmmac: ptp: update tas basetime after ptp adjust") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://lore.kernel.org/r/20211223073928.37371-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: stmmac: add tc flower filter for EtherType matchingOng Boon Leong
This patch adds basic support for EtherType RX frame steering for LLDP and PTP using the hardware offload capabilities. Example steps for setting up RX frame steering for LLDP and PTP: $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 For LLDP $ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88cc \ flower hw_tc 5 OR $ tc filter add dev $IFDEVNAME parent ffff: protocol LLDP \ flower hw_tc 5 For PTP $ tc filter add dev $IFDEVNAME parent ffff: protocol 0x88f7 \ flower hw_tc 6 Show tc ingress filter $ tc filter show dev $IFDEVNAME ingress v1->v2: Thanks to Kurt's and Sebastian's suggestion. - change from __be16 to u16 etype - change ETHER_TYPE_FULL_MASK to use cpu_to_be16() macro Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: stmmac: dwmac-rk: fix oob read in rk_gmac_setupJohn Keeping
KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. Fixes: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong
To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13net: stmmac: Add GFP_DMA32 for rx buffers if no 64 capabilityDavid Wu
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which can give the gfp parameter, in the case of not supporting 64-bit width, using 32-bit address memory can reduce a copy from swiotlb. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: stmmac: bump tc when get underflow error from DMA descriptorXiaoliang Yang
In DMA threshold mode, frame underflow errors may sometimes occur when the TC(threshold control) value is not enough. The TC value need to be bumped up in this case. There is no underflow interrupt bit on DMA_CH(#i)_Status of dwmac4, so the DMA threshold cannot be bumped up in stmmac_dma_interrupt(). The i.mx8mp board observed an underflow error while running NFS boot, the NFS rootfs could not be mounted. The underflow error can be got from the DMA descriptor TDES3 on dwmac4. This patch bump up tc value once underflow error is got from TDES3. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30net: stmmac: Add platform level debug register dump featureBhupesh Sharma
dwmac-qcom-ethqos currently exposes a mechanism to dump rgmii registers after the 'stmmac_dvr_probe()' returns. However with commit 5ec55823438e ("net: stmmac: add clocks management for gmac driver"), we now let 'pm_runtime_put()' disable the clocks before returning from 'stmmac_dvr_probe()'. This causes a crash when 'rgmii_dump()' register dumps are enabled, as the clocks are already off. Since other dwmac drivers (possible future users as well) might require a similar register dump feature, introduce a platform level callback to allow the same. This fixes the crash noticed while enabling rgmii_dump() dumps in dwmac-qcom-ethqos driver as well. It also allows future changes to keep a invoking the register dump callback from the correct place inside 'stmmac_dvr_probe()'. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29stmmac: remove ethtool driver version infoHeiner Kallweit
I think there's no benefit in reporting a date from almost 6 yrs ago. Let ethtool report the default (kernel version) instead. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-29net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header supportVincent Whitchurch
The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097a2f4acf ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26net: stmmac: Disable Tx queues when reconfiguring the interfaceYannick Vignon
The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]--- Fixes: 5fabb01207a2d ("net: stmmac: Add initial XDP support") Fixes: aa042f60e4961 ("net: stmmac: Add support to Ethtool get/set ring parameters") Fixes: 0366f7e06a6be ("net: stmmac: add ethtool support for get/set channels") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20211124154731.1676949-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-25net: stmmac: perserve TX and RX coalesce value during XDP setupOng Boon Leong
When XDP program is loaded, it is desirable that the previous TX and RX coalesce values are not re-inited to its default value. This prevents unnecessary re-configurig the coalesce values that were working fine before. Fixes: ac746c8520d9 ("net: stmmac: enhance XDP ZC driver level switching performance") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20211124114019.3949125-1-boon.leong.ong@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-23net: stmmac: Calculate CDC error only onceKurt Kanzenbach
The clock domain crossing error (CDC) is calculated at every fetch of Tx or Rx timestamps. It includes a division. Especially on arm32 based systems it is expensive. It also requires two conditionals in the hotpath. Add a compensation value cache to struct plat_stmmacenet_data and subtract it unconditionally in the RX/TX functions which spares the conditionals. The value is initialized to 0 and if supported calculated in the PTP initialization code. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20211122111931.135135-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctlsHolger Assmann
Currently, when user space emits SIOCSHWTSTAMP ioctl calls such as enabling/disabling timestamping or changing filter settings, the driver reads the current CLOCK_REALTIME value and programming this into the NIC's hardware clock. This might be necessary during system initialization, but at runtime, when the PTP clock has already been synchronized to a grandmaster, a reset of the timestamp settings might result in a clock jump. Furthermore, if the clock is also controlled by phc2sys in automatic mode (where the UTC offset is queried from ptp4l), that UTC-to-TAI offset (currently 37 seconds in 2021) would be temporarily reset to 0, and it would take a long time for phc2sys to readjust so that CLOCK_REALTIME and the PHC are apart by 37 seconds again. To address the issue, we introduce a new function called stmmac_init_tstamp_counter(), which gets called during ndo_open(). It contains the code snippet moved from stmmac_hwtstamp_set() that manages the time synchronization. Besides, the sub second increment configuration is also moved here since the related values are hardware dependent and runtime invariant. Furthermore, the hardware clock must be kept running even when no time stamping mode is selected in order to retain the synchronized time base. That way, timestamping can be enabled again at any time only with the need to compensate the clock's natural drifting. As a side effect, this patch fixes the issue that ptp_clock_info::enable can be called before SIOCSHWTSTAMP and the driver (which looks at priv->systime_flags) was not prepared to handle that ordering. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Holger Assmann <h.assmann@pengutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19stmmac_pci: Fix underflow size in stmmac_rxZekun Shen
This bug report came up when we were testing the device driver by fuzzing. It shows that buf1_len can get underflowed and be 0xfffffffc (4294967292). This bug is triggerable with a compromised/malfunctioning device. We found the bug through QEMU emulation tested the patch with emulation. We did NOT test it on real hardware. Attached is the bug report by fuzzing. BUG: KASAN: use-after-free in stmmac_napi_poll_rx+0x1c08/0x36e0 [stmmac] Read of size 4294967292 at addr ffff888016358000 by task ksoftirqd/0/9 CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? stmmac_napi_poll_rx+0x1c08/0x36e0 [stmmac] ? stmmac_napi_poll_rx+0x1c08/0x36e0 [stmmac] __kasan_report.cold+0x37/0x7c ? stmmac_napi_poll_rx+0x1c08/0x36e0 [stmmac] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 stmmac_napi_poll_rx+0x1c08/0x36e0 [stmmac] ? stmmac_suspend+0x850/0x850 [stmmac] ? __next_timer_interrupt+0xba/0xf0 net_rx_action+0x363/0xbd0 ? call_timer_fn+0x240/0x240 ? __switch_to_asm+0x40/0x70 ? napi_busy_loop+0x520/0x520 ? __schedule+0x839/0x15a0 __do_softirq+0x18c/0x634 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x15/0x20 smpboot_thread_fn+0x2f1/0x6b0 ? smpboot_unregister_percpu_thread+0x160/0x160 ? __kthread_parkme+0x80/0x100 ? smpboot_unregister_percpu_thread+0x160/0x160 kthread+0x2b5/0x3b0 ? kthread_create_on_node+0xd0/0xd0 ret_from_fork+0x22/0x40 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-18net: stmmac: dwmac-qcom-ethqos: add platform level clocks managementBhupesh Sharma
Split clocks settings from init callback into clks_config callback, which could support platform level clock management. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17stmmac: fix build due to brainos in trans_start changesAlexander Lobakin
txq_trans_cond_update() takes netdev_tx_queue *nq, not nq->trans_start. Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211117152917.3739-1-alexandr.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-17net: annotate accesses to queue->trans_startEric Dumazet
In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: stmmac: Fix signed/unsigned wreckageThomas Gleixner
The recent addition of timestamp correction to compensate the CDC error introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp(). The issue is: s64 adjust = 0; u64 ns; adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate)); ns += adjust; works by chance on 64bit, but falls apart on 32bit because the compiler knows that adjust fits into 32bit and then treats the addition as a u64 + u32 resulting in an off by ~2 seconds failure. The RX variant uses an u64 for adjust and does the adjustment via ns -= adjust; because consistency is obviously overrated. Get rid of the pointless zero initialized adjust variable and do: ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate; which is obviously correct and spares the adjust obfuscation. Aside of that it yields a more accurate result because the multiplication takes place before the integer divide truncation and not afterwards. Stick the calculation into an inline so it can't be accidentally disimproved. Return an u32 from that inline as the result is guaranteed to fit which lets the compiler optimize the substraction. Cc: stable@vger.kernel.org Fixes: 3600be5f58c1 ("net: stmmac: add timestamp correction to rid CDC sync error") Reported-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Benedikt Spranger <b.spranger@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel EHL Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglx Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-15net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platformMeng Li
According to upstream commit 5ec55823438e("net: stmmac: add clocks management for gmac driver"), it improve clocks management for stmmac driver. So, it is necessary to implement the runtime callback in dwmac-socfpga driver because it doesn't use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks are not disabled when system enters suspend status. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-15net: stmmac: enhance XDP ZC driver level switching performanceOng Boon Leong
The previous stmmac_xdp_set_prog() implementation uses stmmac_release() and stmmac_open() which tear down the PHY device and causes undesirable autonegotiation which causes a delay whenever AFXDP ZC is setup. This patch introduces two new functions that just sufficiently tear down DMA descriptors, buffer, NAPI process, and IRQs and reestablish them accordingly in both stmmac_xdp_release() and stammac_xdp_open(). As the results of this enhancement, we get rid of transient state introduced by the link auto-negotiation: $ ./xdpsock -i eth0 -t -z sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 634444 634560 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632330 1267072 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632438 1899584 sock0@eth0:0 txonly xdp-drv pps pkts 1.00 rx 0 0 tx 632502 2532160 Reported-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: stmmac: allow a tc-taprio base-time of zeroVladimir Oltean
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when base_time is in the past") allowed some base time values in the past, but apparently not all, the base-time value of 0 (Jan 1st 1970) is still explicitly denied by the driver. Remove the bogus check. Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of simnple overlapping additions. With a build fix from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: stmmac: Fix E2E delay mechanismKurt Kanzenbach
When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: stmmac: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/ioam6.sh 7b1700e009cc ("selftests: net: modify IOAM tests for undef bits") bf77b1400a56 ("selftests: net: Test for the IOAM encapsulation with IPv6") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-05-29 18:41:27 +0000