summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xscale
AgeCommit message (Collapse)Author
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-23net: ethernet: ixp4xx: Add error handling in ixp4xx_eth_probe()Tang Bin
The function ixp4xx_eth_probe() does not perform sufficient error checking after executing devm_ioremap_resource(), which can result in crashes if a critical error path is encountered. Fixes: f458ac479777 ("ARM/net: ixp4xx: Pass ethernet physical base as resource") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-12net: ethernet: ixp4xx: Use parent dev for DMA poolLinus Walleij
Use the netdevice struct device .parent field when calling dma_pool_create(): the .dma_coherent_mask and .dma_mask pertains to the bus device on the hardware (platform) bus in this case, not the struct device inside the network device. This makes the pool allocation work. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12ARM/net: ixp4xx: Pass ethernet physical base as resourceLinus Walleij
In order to probe this ethernet interface from the device tree all physical MMIO regions must be passed as resources. Begin this rewrite by first passing the port base address as a resource for all platforms using this driver, remap it in the driver and avoid using any reference of the statically mapped virtual address in the driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12net: ehernet: ixp4xx: Use netdev_* messagesLinus Walleij
Simplify and correct a bunch of messages using printk directly to use the netdev_* macros. I have not changed all of them, just the low-hanging fruit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12net: ethernet: ixp4xx: Use distinct local variableLinus Walleij
Use "ndev" for the struct net_device and "dev" for the struct device in probe() and remove(). Add the local "dev" pointer for later use in refactoring. Take this opportunity to fix inverse christmas tree coding style. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12net: ethernet: ixp4xx: Standard module initLinus Walleij
The IXP4xx driver was initializing the MDIO bus before even probing, in the callbacks supposed to be used for setting up the module itself, and with the side effect of trying to register the MDIO bus as soon as this module was loaded or compiled into the kernel whether the device was discovered or not. This does not work with multiplatform environments. To get rid of this: set up the MDIO bus from the probe() callback and remove it in the remove() callback. Rename the probe() and remove() calls to reflect the most common conventions. Since there is a bit of checking for the ethernet feature to be present in the MDIO registering function, making the whole module not even be registered if we can't find an MDIO bus, we need something similar: register the MDIO bus when the corresponding ethernet is probed, and return -EPROBE_DEFER on the other interfaces until this happens. If no MDIO bus is present on any of the registered interfaces we will eventually bail out. None of the platforms I've seen has e.g. MDIO on EthB and only uses EthC, there is always a Ethernet hardware on the NPE (B, C) that has the MDIO bus, we just might have to wait for it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12ixp4xx_eth: move platform_data definitionArnd Bergmann
The platform data is needed to compile the driver as standalone, so move it to a global location along with similar files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-12ptp: ixp46x: move adjacent to ethernet driverArnd Bergmann
The ixp46x ptp driver has a somewhat unusual setup, where the ptp driver and the ethernet driver are in different directories but access the same registers that are defined a platform specific header file. Moving everything into drivers/net/ makes it look more like most other ptp drivers and allows compile-testing this driver on other targets. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2019-08-01net: ixp4xx: Spelling s/XSacle/XScale/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-23ARM: ixp4xx: Move IXP4xx QMGR and NPE headersLinus Walleij
This moves the IXP4xx Queue Manager and Network Processing Engine headers out of the <mack/*> include path as that is incompatible with multiplatform. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23ARM: ixp4xx: Add device tree boot supportLinus Walleij
This adds a minimal support for booting IXP4xx systems from device tree. We have to add hacks to the QMGR, NPE and notably also ethernet and watchdog drivers so that they don't crash the platform: these drivers are unconditionally starting to grab regions of statically remapped IO space with no concern of the device model or other platforms. We will go in and properly fix these drivers as we go along but for now this hack gets us to a place where we can start working on proper device tree support for these platforms. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13net: ixp4xx_eth: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop ↵Yang Wei
profiles dev_consume_skb_irq() should be called in eth_txdone_irq() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: ixp4xx_eth: Utilize phy_ethtool_nway_resetFlorian Fainelli
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-13net: ethernet: ixp4xx_eth: fix spelling mistake in debug messageColin Ian King
Trivial fix to spelling mistake "successed" to "succeeded" in debug message. Also unwrap multi-line literal string. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: ixp4xx_eth: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: ixp4xx_eth: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03ethernet: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ethernet/ixp4xx: prevent allmulti from clobbering promiscDerrick Pallas
If both promisc and allmulti are set, promisc should trump allmulti and disable the MAC filter; otherwise, the interface is not really promisc. Previously, this code checked IFF_ALLMULTI prior to and without regard for IFF_PROMISC; if both were set, only multicast and direct unicast traffic would make it through the filter. Signed-off-by: Derrick Pallas <pallas@meraki.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01net: ptp: move PTP classifier in its own fileDaniel Borkmann
This commit fixes a build error reported by Fengguang, that is triggered when CONFIG_NETWORK_PHY_TIMESTAMPING is not set: ERROR: "ptp_classify_raw" [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.ko] undefined! The fix is to introduce its own file for the PTP BPF classifier, so that PTP_1588_CLOCK and/or NETWORK_PHY_TIMESTAMPING can select it independently from each other. IXP4xx driver on ARM needs to select it as well since it does not seem to select PTP_1588_CLOCK or similar that would pull it in automatically. This also allows for hiding all of the internals of the BPF PTP program inside that file, and only exporting relevant API bits to drivers. This patch also adds a kdoc documentation of ptp_classify_raw() API to make it clear that it can return PTP_CLASS_* defines. Also, the BPF program has been translated into bpf_asm code, so that it can be more easily read and altered (extensively documented in [1]). In the kernel tree under tools/net/ we have bpf_asm and bpf_dbg tools, so the commented program can simply be translated via `./bpf_asm -c prog` where prog is a file that contains the commented code. This makes it easily readable/verifiable and when there's a need to change something, jump offsets etc do not need to be replaced manually which can be very error prone. Instead, a newly translated version via bpf_asm can simply replace the old code. I have checked opcode diffs before/after and it's the very same filter. [1] Documentation/networking/filter.txt Fixes: 164d8c666521 ("net: ptp: do not reimplement PTP/BPF classifier") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31net: ptp: do not reimplement PTP/BPF classifierDaniel Borkmann
There are currently pch_gbe, cpts, and ixp4xx_eth drivers that open-code and reimplement a BPF classifier for the PTP protocol. Since all of them effectively do the very same thing and load the very same PTP/BPF filter, we can just consolidate that code by introducing ptp_classify_raw() in the time-stamping core framework which can be used in drivers. As drivers get initialized after bootstrapping the core networking subsystem, they can make use of ptp_insns wrapped through ptp_classify_raw(), which allows to simplify and remove PTP classifier setup code in drivers. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21ixp4xx_eth: Implement the SIOCGHWTSTAMP ioctlBen Hutchings
This is untested. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-14ixp4xx_eth: Validate hwtstamp_config completely before applying itBen Hutchings
hwtstamp_ioctl() should validate all fields of hwtstamp_config before making any changes. Currently it sets the TX configuration before validating the rx_filter field. Untested as I don't have a cross-compiler to hand. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30net: ixp4xx_eth: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03ixp4xx_eth: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-20ixp4xx_eth: avoid calling dma_pool_create() with NULL devXi Wang
Use &port->netdev->dev instead of NULL since dma_pool_create() doesn't allow NULL dev. Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-06ixp4xx_eth: fix ptp_ixp46x build failureArnaud Patard (Rtp)
When building with ixp4xx_eth and ptp_ixp46x as module, one is getting the following error: ERROR: "ixp46x_phc_index" [drivers/ptp/ptp_ixp46x.ko] undefined! This has been introduced by commit 509a7c25729feab353502e1b544c614772a1d49a. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04net: remove ixp2000 ethernet driverRob Herring
The platform is removed, so there are no users of this driver. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04ixp4xx_eth: Support the get_ts_info ethtool method.Richard Cochran
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24xscale/ixp2000/ixpdev: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-13ixp4xx-eth: fix PHY name to match MDIO bus nameFlorian Fainelli
Commit 0869b3a4: ixp4xx-eth: use an unique MDIO bus name changed the MDIO bus name from "0" to "ixp4xx-eth-0", as a result the PHY name is not longer appropriate and will not match the MDIO bus name so PHY connection will not succeed, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-10ixp4xx-eth: use an unique MDIO bus name.Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31drivers/net: Add module.h to drivers who were implicitly using itPaul Gortmaker
The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-27drivers/net/ethernet/*: Enabled vendor Kconfig optionsJeff Kirsher
Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11xscale: Move the Intel XScale IXP driversJeff Kirsher
Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/ and make the necessary Kconfig and Makefile changes. CC: Krzysztof Halasa <khc@pm.waw.pl> CC: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>