summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-01-03ice: Support UDP segmentation offloadBrett Creeley
Based on the work done by Alex Duyck on other Intel drivers, add code to support UDP segmentation offload (USO) for the ice driver. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-03bna: remove set but not used variable 'pgoff'yu kuai
drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function ‘bfa_ioc_fwver_clear’: drivers/net/ethernet/brocade/bna/bfa_ioc.c:1127:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: netsec: Change page pool nid to NUMA_NO_NODEIlias Apalodimas
The current driver only exists on a non NUMA aware machine. With 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") applied we can safely change that to NUMA_NO_NODE and accommodate future NUMA aware hardware using netsec network interface Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02enetc: add support time specific departure base on the qos etfPo Liu
ENETC implement time specific departure capability, which enables the user to specify when a frame can be transmitted. When this capability is enabled, the device will delay the transmission of the frame so that it can be transmitted at the precisely specified time. The delay departure time up to 0.5 seconds in the future. If the departure time in the transmit BD has not yet been reached, based on the current time, the packet will not be transmitted. This driver was loaded by Qos driver ETF. User could load it by tc commands. Here are the example commands: tc qdisc add dev eth0 root handle 1: mqprio \ num_tc 8 map 0 1 2 3 4 5 6 7 hw 1 tc qdisc replace dev eth0 parent 1:8 etf \ clockid CLOCK_TAI delta 30000 offload These example try to set queue mapping first and then set queue 7 with 30us ahead dequeue time. Then user send test frame should set SO_TXTIME feature for socket. There are also some limitations for this feature in hardware: - Transmit checksum offloads and time specific departure operation are mutually exclusive. - Time Aware Shaper feature (Qbv) offload and time specific departure operation are mutually exclusive. Signed-off-by: Po Liu <Po.Liu@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02fsl/fman: use resource_sizeJulia Lawall
Use resource_size rather than a verbose computation on the end and start fields. The semantic patch that makes these changes is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ struct resource ptr; @@ - (ptr.end + 1 - ptr.start) + resource_size(&ptr) @@ struct resource *ptr; @@ - (ptr->end + 1 - ptr->start) + resource_size(ptr) </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02sfc: Remove unnecessary dependencies on I2CBen Hutchings
Only the SFC4000 code, now moved to sfc-falcon, needed I2C. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02mlxsw: spectrum_dcb: Allow setting default port priorityPetr Machata
When APP TLV selector 1 (EtherType) is used with PID of 0, the corresponding entry specifies "default application priority [...] when application priority is not otherwise specified." mlxsw currently supports this type of APP entry, but uses it only as a fallback for unspecified DSCP rules. However non-IP traffic is prioritized according to port-default priority, not according to the DSCP-to-prio tables, and thus it's currently not possible to prioritize such traffic correctly. Extend the use of the abovementioned APP entry to also set default port priority. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02mlxsw: reg: Add QoS Port DSCP to Priority Mapping RegisterPetr Machata
Add QPDP. This register controls the port default Switch Priority and Color. The default Switch Priority and Color are used for frames where the trust state uses default values. Currently there are two cases where this applies: a port is in trust-PCP state, but a packet arrives untagged; and a port is in trust-DSCP state, but a non-IP packet arrives. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-12-31 This series contains updates to e1000e, igb and igc only. Robert Beckett provide an igb change to assist in keeping packets from being dropped due to receive descriptor ring being full when receive flow control is enabled. Create a separate function to setup SRRCTL to ease in reuse and ensure that setting of the drop enable bit only if receive flow control is not enabled. Sasha adds support for scatter gather support in igc. Improve the direct memory address mapping flow by optimizing/simplifying and more clear. Update igc to use pci_release_mem_regions() instead of pci_release_selected_regions(). Clean up function header comments to align with the actual code. Adds support for 64 bit DMA access, to help handle socket buffer fragments in high memory. Adds legacy power management support in igc by implementing suspend, resume, runtime_suspend/resume, and runtime_idle callbacks. Clean up references to Serdes interface in igc since that interface is not supported for i225 devices. Alex replaces the pr_info calls with netdev_info in all cases related to netdev link state, as suggested by Joe Perches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31igc: Remove serdes comments from a description of methodsSasha Neftin
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31e1000e: Use netdev_info instead of pr_info for link messagesAlexander Duyck
Replace the pr_info calls with netdev_info in all cases related to the netdevice link state. As a result of this patch the link messages will change as shown below. Before: e1000e: ens3 NIC Link is Down e1000e: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx After: e1000e 0000:00:03.0 ens3: NIC Link is Down e1000e 0000:00:03.0 ens3: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add legacy power management supportSasha Neftin
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31igc: Add 64 bit DMA access supportSasha Neftin
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix parameter descriptions for a several functionsSasha Neftin
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Fix the parameter description for igc_alloc_rx_buffersSasha Neftin
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Remove excess parameter description from igc_is_non_eopSasha Neftin
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Prefer to use the pci_release_mem_regions methodSasha Neftin
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Improve the DMA mapping flowSasha Neftin
Improve the probe flow and set both the DMA mask and the coherent to the same thing. Make the flow optimized and cleared. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igc: Add scatter gather supportSasha Neftin
Scatter gather is used to do DMA data transfers of data that is written to noncontiguous areas of memory. This patch enables scatter gather support. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-31igb: dont drop packets if rx flow control is enabledRobert Beckett
If Rx flow control has been enabled (via autoneg or forced), packets should not be dropped due to Rx descriptor ring exhaustion. Instead pause frames should be used to apply back pressure. This only applies if VFs are not in use. Move SRRCTL setup to its own function for easy reuse and only set drop enable bit if Rx flow control is not enabled. Since v1: always enable dropping of packets if VFs in use. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-12-30sfc: avoid duplicate error handling code in 'efx_ef10_sriov_set_vf_mac()'Christophe JAILLET
'eth_zero_addr()' is already called in the error handling path. This is harmless, but there is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29mlxsw: spectrum: Use dedicated policer for VRRP packetsIdo Schimmel
Currently, VRRP packets and packets that hit exceptions during routing (e.g., MTU error) are policed using the same policer towards the CPU. This means, for example, that misconfiguration of the MTU on a routed interface can prevent VRRP packets from reaching the CPU, which in turn can cause the VRRP daemon to assume it is the Master router. Fix this by using a dedicated policer for VRRP packets. Fixes: 11566d34f895 ("mlxsw: spectrum: Add VRRP traps") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-29mlxsw: spectrum_router: Skip loopback RIFs during MAC validationAmit Cohen
When a router interface (RIF) is created the MAC address of the backing netdev is verified to have the same MSBs as existing RIFs. This is required in order to avoid changing existing RIF MAC addresses that all share the same MSBs. Loopback RIFs are special in this regard as they do not have a MAC address, given they are only used to loop packets from the overlay to the underlay. Without this change, an error is returned when trying to create a RIF after the creation of a GRE tunnel that is represented by a loopback RIF. 'rif->dev->dev_addr' points to the GRE device's local IP, which does not share the same MSBs as physical interfaces. Adding an IP address to any physical interface results in: Error: mlxsw_spectrum: All router interface MAC addresses must have the same prefix. Fix this by skipping loopback RIFs during MAC validation. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-28gianfar: Fix TX timestamping with a stacked DSA driverVladimir Oltean
The driver wrongly assumes that it is the only entity that can set the SKBTX_IN_PROGRESS bit of the current skb. Therefore, in the gfar_clean_tx_ring function, where the TX timestamp is collected if necessary, the aforementioned bit is used to discriminate whether or not the TX timestamp should be delivered to the socket's error queue. But a stacked driver such as a DSA switch can also set the SKBTX_IN_PROGRESS bit, which is actually exactly what it should do in order to denote that the hardware timestamping process is undergoing. Therefore, gianfar would misinterpret the "in progress" bit as being its own, and deliver a second skb clone in the socket's error queue, completely throwing off a PTP process which is not expecting to receive it, _even though_ TX timestamping is not enabled for gianfar. There have been discussions [0] as to whether non-MAC drivers need or not to set SKBTX_IN_PROGRESS at all (whose purpose is to avoid sending 2 timestamps, a sw and a hw one, to applications which only expect one). But as of this patch, there are at least 2 PTP drivers that would break in conjunction with gianfar: the sja1105 DSA switch and the felix switch, by way of its ocelot core driver. So regardless of that conclusion, fix the gianfar driver to not do stuff based on flags set by others and not intended for it. [0]: https://www.spinics.net/lists/netdev/msg619699.html Fixes: f0ee7acfcdd4 ("gianfar: Add hardware TX timestamping support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCsMartin Blumenstingl
GXBB and newer SoCs use the fixed FCLK_DIV2 (1GHz) clock as input for the m250_sel clock. Meson8b and Meson8m2 use MPLL2 instead, whose rate can be adjusted at runtime. So far we have been running MPLL2 with ~250MHz (and the internal m250_div with value 1), which worked enough that we could transfer data with an TX delay of 4ns. Unfortunately there is high packet loss with an RGMII PHY when transferring data (receiving data works fine though). Odroid-C1's u-boot is running with a TX delay of only 2ns as well as the internal m250_div set to 2 - no lost (TX) packets can be observed with that setting in u-boot. Manual testing has shown that the TX packet loss goes away when using the following settings in Linux (the vendor kernel uses the same settings): - MPLL2 clock set to ~500MHz - m250_div set to 2 - TX delay set to 2ns on the MAC side Update the m250_div divider settings to only accept dividers greater or equal 2 to fix the TX delay generated by the MAC. iperf3 results before the change: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 182 MBytes 153 Mbits/sec 514 sender [ 5] 0.00-10.00 sec 182 MBytes 152 Mbits/sec receiver iperf3 results after the change (including an updated TX delay of 2ns): [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-10.00 sec 927 MBytes 778 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 927 MBytes 777 Mbits/sec receiver Fixes: 4f6a71b84e1afd ("net: stmmac: dwmac-meson8b: fix internal RGMII clock configuration") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27net: ena: remove set but not used variable 'rx_ring'YueHaibing
drivers/net/ethernet/amazon/ena/ena_netdev.c: In function ena_xdp_xmit_buff: drivers/net/ethernet/amazon/ena/ena_netdev.c:316:19: warning: variable rx_ring set but not used [-Wunused-but-set-variable] commit 548c4940b9f1 ("net: ena: Implement XDP_TX action") left behind this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Fix accounting of vlan resources among the PFsManish Chopra
While testing max vlan configuration on the PF, firmware gets assert as driver was configuring number of vlans more than what is supported per port/engine, it was figured out that there is an implicit vlan (hidden default vlan consuming hardware cam entry resource) which is configured default for all the clients (PF/VFs) on client_init ramrod by the adapter implicitly, so when allocating resources among the PFs this implicit vlan should be considered or total vlan entries should be reduced by one to accommodate that default/implicit vlan entry. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26bnx2x: Use appropriate define for vlan creditManish Chopra
Although it has same value as MAX_MAC_CREDIT_E2, use MAX_VLAN_CREDIT_E2 appropriately. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26dpaa_eth: fix DMA mapping leakMadalin Bucur
On the error path some fragments remain DMA mapped. Adding a fix that unmaps all the fragments. Rework cleanup path to be simpler. Fixes: 8151ee88bad5 ("dpaa_eth: use page backed rx buffers") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Remove FIB entry list from FIB nodeIdo Schimmel
As explained in previous patches, the driver no longer needs to maintain a list of identical FIB entries (i.e, same {tb_id, prefix, prefix length}) and therefore each FIB node can only store one FIB entry. Remove the FIB entry list and simplify the code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Consolidate identical functionsIdo Schimmel
After the last patch mlxsw_sp_fib{4,6}_node_entry_link() and mlxsw_sp_fib{4,6}_node_entry_unlink() are identical and can therefore be consolidated into the same common function. Perform the consolidation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Make route creation and destruction symmetricIdo Schimmel
Host routes that perform decapsulation of IP in IP tunnels have a special adjacency entry linked to them. This entry stores information such as the expected underlay source IP. When the route is deleted this entry needs to be freed. The allocation of the adjacency entry happens in mlxsw_sp_fib4_entry_type_set(), but it is freed in mlxsw_sp_fib4_node_entry_unlink(). Create a new function - mlxsw_sp_fib4_entry_type_unset() - and free the adjacency entry there. This will allow us to consolidate mlxsw_sp_fib{4,6}_node_entry_unlink() in the next patch. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Eliminate dead codeIdo Schimmel
Since the driver no longer maintains a list of identical routes there is no route to promote when a route is deleted. Remove that code that took care of it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26mlxsw: spectrum_router: Remove unnecessary checksIdo Schimmel
Now that the networking stack takes care of only notifying the routes of interest, we do not need to maintain a list of identical routes. Remove the check that tests if the route is the first route in the FIB node. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26net/mlxfw: Fix out-of-memory error in mfa2 flash burningVladyslav Tarasiuk
The burning process requires to perform internal allocations of large chunks of memory. This memory doesn't need to be contiguous and can be safely allocated by vzalloc() instead of kzalloc(). This patch changes such allocation to avoid possible out-of-memory failure. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25net: Introduce peer to peer one step PTP time stamping.Richard Cochran
The 1588 standard defines one step operation for both Sync and PDelay_Resp messages. Up until now, hardware with P2P one step has been rare, and kernel support was lacking. This patch adds support of the mode in anticipation of new hardware developments. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25net: netcp_ethss: Use the PHY time stamping interface.Richard Cochran
The netcp_ethss driver tests fields of the phy_device in order to determine whether to defer to the PHY's time stamping functionality. This patch replaces the open coded logic with an invocation of the proper methods. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24ipv6: Remove old route notifications and convert listenersIdo Schimmel
Now that mlxsw is converted to use the new FIB notifications it is possible to delete the old ones and use the new replace / append / delete notifications. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24mlxsw: spectrum_router: Start using new IPv6 route notificationsIdo Schimmel
With the new notifications mlxsw does not need to handle identical routes itself, as this is taken care of by the core IPv6 code. Instead, mlxsw only needs to take care of inserting and removing routes from the device. Convert mlxsw to use the new IPv6 route notifications and simplify the code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24r8169: move enabling EEE to rtl8169_init_phyHeiner Kallweit
Simplify the code by moving the call to rtl_enable_eee() from the individual PHY configs to rtl8169_init_phy(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24r8169: remove MAC workaround in rtl8168e_2_hw_phy_configHeiner Kallweit
Due to recent changes we don't need the call to rtl_rar_exgmac_set() and longer at this place. It's called from rtl_rar_set() which is called in rtl_init_mac_address() and rtl8169_resume(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24r8169: factor out rtl8168h_2_get_adc_bias_ioffsetHeiner Kallweit
Simplify and factor out this magic from rtl8168h_2_hw_phy_config() and name it based on the vendor driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-20sfc: Include XDP packet headroom in buffer step size.Charles McLachlan
Correct a mismatch between rx_page_buf_step and the actual step size used when filling buffer pages. This patch fixes the page overrun that occured when the MTU was set to anything bigger than 1692. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20sfc: fix channel allocation with brute forceEdward Cree
It was possible for channel allocation logic to get confused between what it had and what it wanted, and end up trying to use the same channel for both PTP and regular TX. This led to a kernel panic: BUG: unable to handle page fault for address: 0000000000047635 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900 Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013 RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffc90000003d28 EFLAGS: 00010006 RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000 RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4 RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000 R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4 R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000 FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x22/0x30 skb_queue_tail+0x1b/0x50 sock_queue_err_skb+0x9d/0xf0 __skb_complete_tx_timestamp+0x9d/0xc0 efx_dequeue_buffer+0x126/0x180 [sfc] efx_xmit_done+0x73/0x1c0 [sfc] efx_ef10_ev_process+0x56a/0xfe0 [sfc] ? tick_sched_do_timer+0x60/0x60 ? timerqueue_add+0x5d/0x70 ? enqueue_hrtimer+0x39/0x90 efx_poll+0x111/0x380 [sfc] ? rcu_accelerate_cbs+0x50/0x160 net_rx_action+0x14a/0x400 __do_softirq+0xdd/0x2d0 irq_exit+0xa0/0xb0 do_IRQ+0x53/0xe0 common_interrupt+0xf/0xf </IRQ> In the long run we intend to rewrite the channel allocation code, but for 'net' fix this by allocating extra_channels, and giving them TX queues, even if we do not in fact need them (e.g. on NICs without MAC TX timestamping), and thereby using simpler logic to assign the channels once they're allocated. Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20qede: Disable hardware gro when xdp prog is installedManish Chopra
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced a regression in driver that when xdp program is installed on qede device, device's aggregation feature (hardware GRO) is not getting disabled, which is unexpected with xdp. Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-19 14:35:32 +0000