Age | Commit message (Collapse) | Author |
|
The "link status" interrupt is used for more than just link status.
Restructure mvpp2_link_status_isr() so we can add additional handling.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Split the XLG and GMAC PCS implementations and switch between them
during the mac_prepare() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Convert mvpp2 to phylink's new pcs support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Move the GMAC reset handling into mac_prepare() / mac_finish()
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Ensure that the port is forced down while reconfiguring, controlling
this via mac_prepare() and mac_finish() so that it is down while we
are configuring our (future) PCS.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in
preparation to converting mvpp2 to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Tidy up the ACPI hack so that we can minimise the function prototypes
for this. This avoids adding further prototypes unnecessarily.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Split out the code handling the GMAC from the rest of the driver. This
block appears to be shared amongst several revisions of the IP.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
An initial stab at converting mvneta to PCS operations. There's a few
FIXMEs to be solved.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Move the 1ms clock control out of mac_config() into mac_prepare() and
mac_finish(), which simplifies the mac_config() code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Convert mvneta to use the mac_prepare() and mac_finish() methods in
preparation to converting mvneta to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Program the 1ms autonegotiation clock divisor according to the clocking
rate of neta - without this, the 1ms clock ticks at about 660us on
Armada 38x configured for 250MHz. Bring this into correct specification.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fill in the phy interface mode bitmap for the Marvell mvpp2 driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fill in the phy interface mode bitmap for the Marvell mvneta driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The SGMII PCS PHY needs to be updated with the link configuration in
the mac_link_up() call rather than in mac_config(). However,
mtk_sgmii_setup_mode_force() programs the SGMII block during
mac_config() when using 802.3z interface modes with the link
configuration.
Split that functionality from mtk_sgmii_setup_mode_force(), moving it
to a new mtk_sgmii_link_up() function, and call it from mac_link_up().
This does not look correct to me: 802.3z modes operate at a fixed
speed. The contents of mtk_sgmii_link_up() look more appropriate for
SGMII mode, but the original code definitely did not call
mtk_sgmii_setup_mode_force() for SGMII mode but only 802.3z mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Convert the mtk_eth_soc driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Set the flow control settings in mvpp2_mac_link_up() for 10G links
just as we do for 1G and slower links. This is now the preferred
location.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add a helper to read-modify-write a register, and use it in the phylink
helpers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add a helper to convert the struct phylink_config pointer passed in
from phylink to the drivers internal struct mvpp2_port.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The mvpp2 code has tests scattered amongst the code to determine
whether the port supports the XLG, and whether the port supports
RGMII mode.
Rather than having these tests scattered, provide a couple of helper
functions, so that future additions can ensure that they get these
tests correct.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-07-30
This small patchset introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.18:
('net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq')
For -stable v5.7:
('net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-07-30
This series contains updates to the e1000e and igb drivers.
Aaron Ma allows PHY initialization to continue if ULP disable failed for
e1000e.
Francesco Ruggeri fixes race conditions in igb reset that could cause panics.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.
The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".
Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.
Fixes: 422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The flow_source must be specified, even for rule without matching
source vport, because some actions are only allowed in uplink.
Otherwise, rule can't be offloaded and firmware syndrome happens.
Fixes: 6fb0701a9cfa ("net/mlx5: E-Switch, Add support for offloading rules with no in_port")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The modified flow_context fields in FTE must be indicated in
modify_enable bitmask. Previously, the misc bit in modify_enable is
always set as source vport must be set for each rule. So, when parsing
vxlan/gre/geneve/qinq rules, this bit is not set because those are all
from the same misc fileds that source vport fields are located at, and
we don't need to set the indicator twice.
After adding per vport tables for mirroring, misc bit is not set, then
firmware syndrome happens. To fix it, set the bit wherever misc fileds
are changed. This also makes it unnecessary to check misc fields and set
the misc bit accordingly in metadata matching, so here remove it.
Besides, flow_source must be specified for uplink because firmware
will check it and some actions are only allowed for packets received
from uplink.
Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently the driver restores only IPv4 tunnel headers.
Add support for restoring IPv6 tunnel header.
Fixes: b8ce90370977 ("net/mlx5e: Restore tunnel metadata on miss")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
gemini_ethernet_port_probe()
Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On an error return, jump to the unlock at the end to be sure
to unlock the queue_lock mutex.
Fixes: 0925e9db4dc8 ("ionic: use mutex to protect queue operations")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU")
Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.
Fixes: 87ab207981ec ("net: nixge: Separate ctrl and dma resources")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows
for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")'
break out of init phy:
error log:
[ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error
When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.
Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.
Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several notifiers are registered as part of router initialization.
Since some of these notifiers are registered before the end of the
initialization, it is possible for them to access uninitialized or freed
memory when processing notifications [1].
Additionally, some of these notifiers queue work items on a workqueue.
If these work items are executed after the router was de-initialized,
they will access freed memory.
Fix both problems by moving the registration of the notifiers to the end
of the router initialization and flush the work queue after they are
unregistered.
[1]
BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61
CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
__mutex_lock_common kernel/locking/mutex.c:938 [inline]
__mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293
Allocated by task 1298:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
kmalloc include/linux/slab.h:555 [inline]
kzalloc include/linux/slab.h:669 [inline]
mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074
mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932
__mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375
mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline]
mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133
devlink_reload net/core/devlink.c:2959 [inline]
devlink_reload+0x281/0x3b0 net/core/devlink.c:2944
devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:672
____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
___sys_sendmsg+0xff/0x170 net/socket.c:2417
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 1348:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kfree+0xe6/0x320 mm/slub.c:4063
mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132
mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474
mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123
devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952
devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:672
____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
___sys_sendmsg+0xff/0x170 net/socket.c:2417
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888038c3a000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1760 bytes inside of
2048-byte region [ffff888038c3a000, ffff888038c3a800)
The buggy address belongs to the page:
page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000
raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.
However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].
Fix this by freeing the transaction after a grace period by calling
kfree_rcu().
[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881
CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061
mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
__do_softirq+0x223/0x964 kernel/softirq.c:292
asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline]
do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:387 [inline]
__irq_exit_rcu kernel/softirq.c:417 [inline]
irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429
sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191
Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d
RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286
RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9
RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1
R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000
__do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x473dbd
Code: Bad RIP value.
RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040
RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c
R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80
Allocated by task 871:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
kmalloc include/linux/slab.h:555 [inline]
kzalloc include/linux/slab.h:669 [inline]
mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812
mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293
Freed by task 871:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kfree+0xe6/0x320 mm/slub.c:4052
mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819
mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293
The buggy address belongs to the object at ffff88800b796400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 232 bytes inside of
512-byte region [ffff88800b796400, ffff88800b796600)
The buggy address belongs to the page:
page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.
Fix this by increasing the scope of the RCU read-side critical section.
Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cited commit added the ability to program link-local prefix routes to
the ASIC so that relevant packets are routed and trapped correctly.
However, host routes were not included in the change and thus not
programmed to the ASIC. This can result in packets being trapped via an
external route trap instead of a local route trap as in IPv4.
Fix this by programming all the link-local routes to the ASIC.
Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added unregister_netdev in the driver remove
function. Generally unregister_netdev is called
after disabling all the device interrupts but here
it is called before disabling device mailbox
interrupts. The reason behind this is VF needs
mailbox interrupt to communicate with its PF to
clean up its resources during otx2_stop.
otx2_stop disables packet I/O and queue interrupts
first and by using mailbox interrupt communicates
to PF to free VF resources. Hence this patch
calls unregister_device just before
disabling mailbox interrupts.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During driver exit cancel the queued
reset_task work in VF driver.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two bugs exist in the code related to reset_task
in PF driver one is the missing protection
against network stack ndo_open and ndo_close.
Other one is the missing cancel_work.
This patch fixes those problems.
Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It appears that not disabling a PCI device on .shutdown may lead to
a Hardware Error with particular (perhaps buggy) BIOS versions:
mlx4_en: eth0: Close port called
mlx4_en 0000:04:00.0: removed PHC
reboot: Restarting system
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: event severity: fatal
{1}[Hardware Error]: Error 0, type: fatal
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 4, root port
{1}[Hardware Error]: version: 1.16
{1}[Hardware Error]: command: 0x4010, status: 0x0143
{1}[Hardware Error]: device_id: 0000:00:02.2
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x04
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f06
{1}[Hardware Error]: class_code: 000604
{1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003
{1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000
{1}[Hardware Error]: aer_uncor_severity: 0x00062030
{1}[Hardware Error]: TLP Header: 40000018 040000ff 791f4080 00000000
[hw error repeats]
Kernel panic - not syncing: Fatal hardware error!
CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017
Fix the mlx4 driver.
This is a very similar problem to what had been fixed in:
commit 0d98ba8d70b0 ("scsi: hpsa: disable device during shutdown")
to address https://bugzilla.kernel.org/show_bug.cgi?id=199779.
Fixes: 2ba5fbd62b25 ("net/mlx4_core: Handle AER flow properly")
Reported-by: Jake Lawrence <lawja@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify mtk_gmac0_rgmii_adjust() so it can always be called.
mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-By: David Woodhouse <dwmw2@infradead.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes-2020-07-28
This series introduces some fixes to mlx5 driver.
v1->v2:
- Drop the "Hold reference on mirred devices" patch, until Or's
comments are addressed.
- Imporve "Modify uplink state" patch commit message per Or's request.
Please pull and let me know if there is any problem.
For -Stable:
For -stable v4.9
('net/mlx5e: Fix error path of device attach')
For -stable v4.15
('net/mlx5: Verify Hardware supports requested ptp function on a given
pin')
For -stable v5.3
('net/mlx5e: Modify uplink state on interface up/down')
For -stable v5.4
('net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev')
('net/mlx5: E-switch, Destroy TSAR when fail to enable the mode')
For -stable v5.5
('net/mlx5: E-switch, Destroy TSAR after reload interface')
For -stable v5.7
('net/mlx5: Fix a bug of using ptp channel index as pin index')
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the cited commit, function 'mlx5_eswitch_set_vport_vlan' started
to acquire esw->state_lock.
However, esw is not defined for VF devices, hence attempting to set vf
VLANID on a VF dev will cause a kernel panic.
Fix it by moving up the (redundant) esw validation from function
'__mlx5_eswitch_set_vport_vlan' since the rest of the callers now have
and use a valid esw.
For example with vf device eth4:
# ip link set dev eth4 vf 0 vlan 0
Trace of the panic:
[ 411.409842] BUG: unable to handle page fault for address: 00000000000011b8
[ 411.449745] #PF: supervisor read access in kernel mode
[ 411.452348] #PF: error_code(0x0000) - not-present page
[ 411.454938] PGD 80000004189c9067 P4D 80000004189c9067 PUD 41899a067 PMD 0
[ 411.458382] Oops: 0000 [#1] SMP PTI
[ 411.460268] CPU: 4 PID: 5711 Comm: ip Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1
[ 411.462447] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 411.464158] RIP: 0010:__mutex_lock+0x4e/0x940
[ 411.464928] Code: fd 41 54 49 89 f4 41 52 53 89 d3 48 83 ec 70 44 8b 1d ee 03 b0 01 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 45 85 db 75 0a <48> 3b 7f 60 0f 85 7e 05 00 00 49 8d 45 68 41 56 41 b8 01 00 00 00
[ 411.467678] RSP: 0018:ffff88841fcd74b0 EFLAGS: 00010246
[ 411.468562] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 411.469715] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000001158
[ 411.470812] RBP: ffff88841fcd7550 R08: ffffffffa00fa1ce R09: 0000000000000000
[ 411.471835] R10: ffff88841fcd7570 R11: 0000000000000000 R12: 0000000000000002
[ 411.472862] R13: 0000000000001158 R14: ffffffffa00fa1ce R15: 0000000000000000
[ 411.474004] FS: 00007faee7ca6b80(0000) GS:ffff88846fc00000(0000) knlGS:0000000000000000
[ 411.475237] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 411.476129] CR2: 00000000000011b8 CR3: 000000041909c006 CR4: 0000000000360ea0
[ 411.477260] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 411.478340] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 411.479332] Call Trace:
[ 411.479760] ? __nla_validate_parse.part.6+0x57/0x8f0
[ 411.482825] ? mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core]
[ 411.483804] mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core]
[ 411.484733] mlx5e_set_vf_vlan+0x41/0x50 [mlx5_core]
[ 411.485545] do_setlink+0x613/0x1000
[ 411.486165] __rtnl_newlink+0x53d/0x8c0
[ 411.486791] ? mark_held_locks+0x49/0x70
[ 411.487429] ? __lock_acquire+0x8fe/0x1eb0
[ 411.488085] ? rcu_read_lock_sched_held+0x52/0x60
[ 411.488998] ? kmem_cache_alloc_trace+0x16d/0x2d0
[ 411.489759] rtnl_newlink+0x47/0x70
[ 411.490357] rtnetlink_rcv_msg+0x24e/0x450
[ 411.490978] ? netlink_deliver_tap+0x92/0x3d0
[ 411.491631] ? validate_linkmsg+0x330/0x330
[ 411.492262] netlink_rcv_skb+0x47/0x110
[ 411.492852] netlink_unicast+0x1ac/0x270
[ 411.493551] netlink_sendmsg+0x336/0x450
[ 411.494209] sock_sendmsg+0x30/0x40
[ 411.494779] ____sys_sendmsg+0x1dd/0x1f0
[ 411.495378] ? copy_msghdr_from_user+0x5c/0x90
[ 411.496082] ___sys_sendmsg+0x87/0xd0
[ 411.496683] ? lock_acquire+0xb9/0x3a0
[ 411.497322] ? lru_cache_add+0x5/0x170
[ 411.497944] ? find_held_lock+0x2d/0x90
[ 411.498568] ? handle_mm_fault+0xe46/0x18c0
[ 411.499205] ? __sys_sendmsg+0x51/0x90
[ 411.499784] __sys_sendmsg+0x51/0x90
[ 411.500341] do_syscall_64+0x59/0x2e0
[ 411.500938] ? asm_exc_page_fault+0x8/0x30
[ 411.501609] ? rcu_read_lock_sched_held+0x52/0x60
[ 411.502350] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 411.503093] RIP: 0033:0x7faee73b85a7
[ 411.503654] Code: Bad RIP value.
Fixes: 0e18134f4f9f ("net/mlx5e: Eswitch, use state_lock to synchronize vlan change")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.
This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.
When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".
Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In a special configuration, a ConnectX6-Dx pin pps-out might be activated
when driver is loaded. Fix the driver to always read the operational pin
mode when registering it, and advertise it accordingly.
Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
mlx5e_rep_is_lag_netdev is used as first check as part of netdev events
handler for bond device of non-uplink representors, this handler can get
any netdevice under the same network namespace of mlx5e netdevice. Current
code treats the netdev as mlx5e netdev and only later on verifies this,
hence causes the following Kasan trace:
[15402.744990] ==================================================================
[15402.746942] BUG: KASAN: slab-out-of-bounds in mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.749009] Read of size 8 at addr ffff880391f3f6b0 by task ovs-vswitchd/5347
[15402.752065] CPU: 7 PID: 5347 Comm: ovs-vswitchd Kdump: loaded Tainted: G B O --------- -t - 4.18.0-g3dcc204d291d-dirty #1
[15402.755349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[15402.757600] Call Trace:
[15402.758968] dump_stack+0x71/0xab
[15402.760427] print_address_description+0x6a/0x270
[15402.761969] kasan_report+0x179/0x2d0
[15402.763445] ? mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.765121] mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.766782] mlx5e_rep_esw_bond_netevent+0x129/0x620 [mlx5_core]
Fix by deferring the violating access to be post the netdev verify check.
Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix a bug where driver did not verify Hardware pin capabilities for
PTP functions.
Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|